Tools To Design Algorithms For Implementing Control Over Quantum Computers, Shilpa Narashimhan, Jihan Abou Halloun, Kip Nieman, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computers (QCs) may find future applications within control systems that operate manufacturing processes. For application within control engineering, quantum algorithm development must be led by control engineers. However, control engineers may face challenges in designing quantum algorithms for control engineering problems. In this work, we provide several path-finding studies that leverage engineering tools such as optimization, encryption, and computational "short-cuts" toward making algorithm design for QC easier for control engineers.

Dissolution Mechanism Of Nonionic Polyether Surfactants In Supercritical Co2, Ning Xu, Yanling Wang, Baojun Bai, Shizhang Cui, Zan Gao, Yu Zhang, Di Li, Wenjing Shi, Wenhui Ding, Peixu Ma

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polyoxyethylene ether is an efficient CO₂-philic compound with significant potential applications in CO₂ flooding, which requires CO₂-philic surfactants with high solubility in supercritical CO₂ (scCO₂). This study elucidates the molecular and atomic-level dissolution mechanism of the fatty alcohol polyoxyethylene ether (AEO) in scCO₂ by combining phase-behavior experiments and molecular dynamics simulations. The solubility of AEO in scCO₂ is measured using a semiconductor laser. AEO containing three polyoxyethylene (EO) groups exhibited the highest solubility in scCO₂.The solubility of AEO in scCO₂ decreased with an increase in the number …

Investigation Of A Stable And Saturated Reference Electrode Using Metal Chlorides And Oxides In Eutectic Licl-Kcl Molten Salts, Carlos Mejia, Devin Rappleye

Faculty Publications

Stable and reproducible reference electrodes (REs) are essential for electrochemical systems operating in high-temperature molten salts, where consistent control of potential is required. This study uses three different solutes to investigate the development and evaluation of REs in eutectic LiCl-KCl at 773 K. The solutes tested were NiCl₂, AgCl, and NiO, each prepared at multiple concentrations to assess stability, reproducibility, and saturation. Electrochemical stability was measured over three days using chronopotentiometry (CP), followed by open circuit potential (OCP), with cyclic voltammetry (CV) also integrated to monitor changes in electrochemical behavior over time. The CP-OCP approach established a Li …

Investigation Of A Stable And Saturated Reference Electrode Using Metal Chlorides And Oxides In Eutectic Licl-Kcl Molten Salts, Carlos Mejia, Devin Rappleye

Faculty Publications

Stable and reproducible reference electrodes (REs) are essential for electrochemical systems operating in high-temperature molten salts, where consistent control of potential is required. This study uses three different solutes to investigate the development and evaluation of REs in eutectic LiCl-KCl at 773 K. The solutes tested were NiCl2, AgCl, and NiO, each prepared at multiple concentrations to assess stability, reproducibility, and saturation. Electrochemical stability was measured over three days using chronopotentiometry (CP), followed by open circuit potential (OCP), with cyclic voltammetry (CV) also integrated to monitor changes in electrochemical behavior over time. The CP-OCP approach established a Li+/Li redox potential, …

Ceramic Waste As Sustainable Material In Self-Compacting Concrete: Experimental Study And Ann Predictive Modeling, Abderrezak Bouziane, Houssam Slimanou, Mohamed Amin Bouzidi, Nedjima Bouzidi

Journal of Sustainable Construction Materials and Technologies

Recycling of ceramic waste in the construction sector is a promising option for reducing the environmental impacts of the concrete industry. The main objective of this study is the elaboration of a solid predictive model for ceramic waste based self-compacting (SCC) concrete properties, using artificial neural networks (ANN). This further, reduces its environmental impact without compromising satisfactory performance. An experimental approach was adopted with different substitution ratios: 0 to 30 wt% and particle sizes ranging from 3-8 mm and 8-15 mm. Tested properties of modified SCC as compressive strength at 7 and 28 days (fc7, fc28), spread (L), sieve stability …

Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore

Journal of Sustainable Construction Materials and Technologies

The environmental footprint of cement production has accelerated the pursuit of sustainable alternatives in the construction industry. Supplementary cementitious materials (SCMs), particularly those derived from industrial and agricultural waste, offer a promising approach to reducing cement consumption while maintaining performance. This study evaluates the fresh and mechanical behavior of binary, ternary, and quaternary cementitious mortar blends incorporating ground granulated blast-furnace slag (GGBS), ultrafine GGBS (UGGBS), and rice husk ash (RHA) as partial replacements for cement. A total of 32 mortar mixes were designed with water-to-binder (w/b) ratios ranging from 0.3 to 0.5 and varied replacement levels of RHA (0-20%), GGBS …

Class A Biosolids Production Using Conventional And Low-Cost, Low-Tech Processes At Small Water Resource Recovery Facilities: A Multidimensional Sustainability Assessment, Janna Brown, Robert Handler, Eric Seagren, Jennifer Becker

Michigan Tech Publications

Producing Class A biosolids is a beneficial way to reuse wastewater treatment solids, but most conventional processes are energy-intensive and expensive. There is growing interest in the use of low-cost, low-tech (LCLT) Class A biosolids treatment processes, especially at small water resource recovery facilities (WRRFs). This study used a holistic sustainability assessment to examine the environmental, economic, and social sustainability of conventional and LCLT processes at small WRRFs. The technologies studied were Direct Heat Drying, Composting, Lagoon Storage, Air Drying, and Temperature-Phased Anaerobic Digestion (TPAD). Environmental impacts were determined by conducting life-cycle assessments for all technologies, which is described in …

A Contemporary Approach For Exploring The Influence Of Detoxification And Standardization Of Traditional Metallopharmaceutical Product Pharmacological And Toxicological Aspects, Malarvizhi K

Theses and Dissertations

Polyherbomineral formulation possess unique medicinal properties due to the presence of metals and minerals as integral part, as processed in addition to specific herbals. There is an increased interest in metallopharmaceuticals in clinical and research areas, because of their immense therapeutic efficiency towards multiple diseases and evidence for non-toxic claim. Sivanar Amirtham is one of the polyherbomineral Siddha medicine recommended for the treatment of various respiratory diseases and other ailments including antidote therapy for poisonous bites. The present research work attempted for standardization of Sivanar Amirtham preparation as per the traditional standard protocols (including the detoxification process of raw materials) …

Bioprospecting Of Wheat Straw Pyrolysis Aqueous Phase To Combat Multi-Drug Resistant Pathogens, Srividhya K

Theses and Dissertations

Hospital-acquired infections (HAIs) significantly contribute to the emergence and spread of antimicrobial resistance (AMR), primarily through the contamination of high-touch surfaces. Current disinfectants have drawbacks like high environmental persistence, ecotoxicity, and resistance development, prompting the need for environmentally friendly alternatives.

One potential approach is pyrolysis, during which the biomass components are broken down into solid, liquid, and pyro-gas. The aqueous phase of the liquid fraction is usually discarded as waste, but it contains a variety of organic compounds that have the potential for antibacterial and antifungal activity. The present study assessed the anti-infective and anti-biofilm properties of wheat straw pyrolysis …

Design And Investigation Of Deep Eutectic Solvent-Assisted Extractive Fermentation Of Biomolecules, Ramya M

Theses and Dissertations

The increasing demand for sustainable and efficient bioprocessing techniques has prompted the development of novel separation strategies integrating bioproduction with downstream processing. Extractive fermentation has emerged as a promising process intensification to overcome product inhibition and enhance productivity by constantly removing target biomolecules from the fermentation medium. Although the extractive fermentation of acids and alcohols has been extensively studied, less attention has been focused on green solvents and their compatibility, phase-forming abilities, and reactor configurations.

Therefore, advancing extractive fermentation technology necessitates comprehensive studies on solvent systems and the development of modified bioreactor configurations to aid future optimization. Initially, 22 DESs …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Fire And Explosion Hazard Risk Analysis Of Fuel Transfer Activities At Fuel Terminal “X” Utilizing The Quantitative Risk Analysis (Qra) Method, Angga Wahyu Sulistyawan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Fuel transfer operations at Fuel Terminal ‘X’ constitute a critical stage in the energy supply chain, where complex interactions among human, technical, and environmental factors generate inherent risks of fire and explosion. The flammable nature of fuel oil, coupled with the possibility of vapor or liquid releases outcoming by tool failures, connection leaks, or control system malfunctions, underscores the need for robust and proactive risk management strategies. This study aims to evaluate and mitigate these risks by applying Quantitative Risk Assessment (QRA). The assessment utilized the Parts Count method to foercast generic component failure rates and Fault Tree Analysis (FTA) …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Exploring Different Metal-Oxide Cathode Materials For Structural Lithium-Ion Batteries Using Dip-Coating, David Petrushenko, Thomas Burns, Paul Ziehl, Ralph E. White, Paul T. Coman

Faculty Publications

In this study, a selection of active materials were coated onto commercially available intermediate modulus carbon fibers to form and analyze the performance of novel composite cathodes for structural power composites. Various slurries containing polyvinylidene fluoride (PVDF), active material powders, 1-methyl-2-pyrrolidone (NMP) and carbon black (CB) were used to coat carbon fiber tows by immersion. Four active materials—lithium cobalt oxide (LCO), lithium iron phosphate (LFP), lithium nickel manganese cobalt oxide (NMC), and lithium nickel cobalt aluminum oxide (NCA)—were individually tested to assess their electrochemical reversibility. The cells were prepared with a polymer separator and liquid electrolytes and assembled in 2025-coin …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Improving Particle-Phase Nitrate Measurement In Pm2.5 Filter Sampling: Evaluation Of A Denuder–Nylon Filter Modification In The Spartan Network, Wenyu Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Accurate measurement of PM_2.5 composition is of global importance. Evaporation-induced mass loss introduces potential bias in filter-based PM_2.5 measurements, with ammonium nitrate volatilization from Teflon filters being a major contributor to negative mass artifacts. Previous studies have demonstrated that using an acid gas denuder in combination with nylon filters can help recover the nitrate mass. This study evaluates design modifications to the AirPhoton sampling station setup within the globally distributed Surface Particulate Matter Network (SPARTAN) incorporating an additional acid gas denuder upstream and a nylon filter downstream of the existing Teflon filter.

Two co-located AirPhoton Sampling stations were …

Non-Thermal Dbd Plasma-Induced Co₂ Capture And Conversion To Value Added Chemicals, Chinwendu Theresa Umeojiakor

Theses and Dissertations

Electrified CO2 conversion via nonthermal dielectric-barrier discharge (DBD) plasma presents a promising pathway for integrating renewable energy into the carbon cycle, addressing the dual challenges of CO2 reduction and sustainable fuel generation. In this research, DBD plasma technology was integrated with a sorbent material and/or catalytic materials for CO2 desorption and conversion. Specifically, with Ni/Al2O3 as the catalyst, we investigated CO2 splitting (CO2 to CO and 0.5O2) and hydrogenation (CO2 and H2 to CO and H2O) under adiabatic and subcooled conditions. We find that CO2 splitting shows higher efficiency than hydrogenation, particularly at relatively lower power inputs. While CO2 hydrogenation …

Reactive Molecular Dynamics And Method Development For Applications In Renewable Energy And Sorption Equilibria, Woodrow Wilson

Theses and Dissertations

It is crucial to harness energy from sustainable sources to combat the dwindling nonrenewable feedstocks used to produce everyday commodities and fuels. Liquid-phase heterogeneous catalysis has demonstrated remarkable product selectivity and yields for reactions relevant to biomass valorization under mild operating conditions. However, active site characterization is challenging due to the complex solvated environment and interface. Ground-state first-principles (FP) molecular simulations have provided insights into reactive systems in catalysis. These calculations, however, scale poorly with the number of electrons. Observing atomic motion with molecular dynamics (MD) or sampling static properties with Monte Carlo (MC) simulations at statistically relevant lengths- and …

From Chemistry To Conscious Code: How Ai Is Shaping The Next Generation Of Sustainable Innovation, Shehan S. Makani

STEM for Success Showcase

In a world racing toward an uncertain future, we stand at the thrilling intersection of chemistry, artificial intelligence, and human resilience. For many of us in STEM, this is no longer just about mastering equations or coding algorithms - it’s about engineering the future itself. At NJIT, we are not just students and researchers - we are builders, thinkers, and dreamers. And the truth is, the world needs dreamers with tools now more than ever.