Chemical Engineering Commons^™

Genetic Code Expansion In Biochemical Investigations And Biomedical Applications, Nanxi Wang

Department of Chemistry: Dissertations, Theses, and Student Research

Genetic code expansion provides a powerful tool for site-specific incorporation of unnatural amino acids (unAAs) with novel biochemical and physiological properties into proteins in live cells and organisms. To achieve this, a nonsense codon suppression system, which consists of an orthogonal aminoacyl-tRNA synthetase (aaRS) and tRNA pair that specifically decodes a nonsense codon (e.g., amber codon and quadruplet codon) with an unAA but do not “cross talk” with their endogenous counterparts, was established. This Ph.D. thesis presents our efforts on evolution and application of nonsense codon suppression systems for biochemical and biomedical investigations.

In Chapter 1, a brief overview of …

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

Evaluating The Bond Behavior Between Frp And Grooved Concrete Specimens Using Single Shear Pull Out Test, John Omboko

Master's Theses (2009 -)

Surface preparation affects the bond behavior between Fiber Reinforcing Polymer (FRP) composite material and concrete. In this research, a special type of surface preparation known as grooving, which involves cutting transverse grooves, is conducted on concrete blocks (specimens) that are categorized as either Unfilled (U) or Filled (F). This idea is to ascertain how the grooves affect the strength of FRP-bonded-concrete specimen. These two categories are then benchmarked to control (C) specimens which do not have grooves on them. Category U specimens only have the epoxy applied on the concrete surface while category F specimens have epoxy applied on both …

Decellularization And Recellularization Processes For Whole Porcine Kidneys, Nafiseh Poornejad

Theses and Dissertations

Concern over kidney disease has increased dramatically in recent years within the medical community. It is estimated that approximately one in fifteen Americans, nearly 20 million people, experience chronic kidney disease with most of those diagnosed progressing to kidney failure. The ultimate treatment available for end stage renal failure is whole kidney transplantation. However, there are very few kidneys available for patients to receive and those patients who are fortunate enough to receive an organ must remain on immunosuppressive medication for the remainder of their lives. The United States Department of Health & Human Services have reported that 18 people …

Towards A Cost-Effective Biorefinery : Production Of Activated Carbons From Residual Biomass For Energy Storage Devices., Zachary Dean Herde

Electronic Theses and Dissertations

Biomass processing for industrial products and biofuels has gained an increasing presence as society looks to using sustainable resources for manufacturing and renewable fuels for energy. However, these sustainably produced materials and products cannot gain a competitive edge because of the manufacturing expenses that are a result of high process temperatures and pressures. In order to lower these costs, theoretical modeling has described a value-added co-product strategy as one of the best ways to combat high bioprocessing prices. Biomass has been shown to make effective carbons for energy storage devices such as supercapacitors and batteries. These carbons, with the right …

Encapsulation Process Of Propolis Extract By Casein Micelle Improves Sunscreen Activity, Muhamad Sahlan, Dara Dienayati, Darul Hamdi, Soraya Zahra, Heri Hermansyah, Malyn Chulasiri

Makara Journal of Technology

Propolis, a wax bee glue, have antioxidant activity and effective as broad spectrum UVB and UVA photoprotection sunscreens agent. To improve photoprotection activity in sunscreen cream, the propolis was encapsulated by casein micelle. The Indonesian propolis was extracted by ethanol and separated the wax by freeze precipitation. The extract was encapsulated by casein and reduced their size by ball mill homogenizer with the encapsulation efficiency about 80% and size of particles about 80 nm. The particles was applied in sunscreen cream, evaluate their stabillity and photoprotection activity Sun Protection Factor (SPF) spectrophotometer (Optometric 290s). The results shows that the selected …

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …

The Effects Of Light Intensity On The Growth Kinetics Of The Cyanobacteria Synechococcus Elongatus And Synechocystis Sp., Aleshia Lexus Hector

Honors Capstones

No abstract provided.

Quantitative Analysis Of High Pressure Hazards In Oil And Gas Field Operations, Giuseppe Feo

Honors Capstones

No abstract provided.

The Chiral Coefficient: Rapid Optimization Of Plasmonic Circular Dichroism, Jon Wilson

Honors Capstones

No abstract provided.

Quantifying Cyanide Inhibition Of Nitrification And Developing Cost-Effective Treatment Processes, Germano M. Salazar-Benites

Civil & Environmental Engineering Theses & Dissertations

All wastewater treatment plants that operate multiple hearth furnaces (MHF) and are required to nitrify must manage the inhibitory effects of free cyanide (HCN, CN-) in the scrubber return flows due to inhibitory impacts on nitrifying bacteria.

HRSD Boat Harbor Treatment Plant (BHTP) a 25 MGD facility consisting of primary and secondary treatment, employs an anoxic selector process for nitrification and partial denitrification and operates a MHF. There is a desire to improve TN removal performance at BHTP due to an annual mass-based bubble permit limit on a combined discharge from seven HRSD plants, and there are no discharge limitations …

Corrosion Behaviour Of Selective Laser Melted Ti-Tib Biocomposite In Simulated Body Fluid, Yang Chen, Junxi Zhang, Nianwei Dai, Peng Qin, Hooyar Attar, Laichang Zhang

Research outputs 2014 to 2021

The corrosion behaviour of CP-Ti and Ti-TiB composite produced by selective laser melting (SLM) in the artificial simulated body fluid (Hank's solution) at body temperature was investigated systematically by using electrochemical measurements (potentiodynamic polarisation curves and electrochemical impedance spectroscopy), together with some detailed structural characterisations. The results demonstrate that SLM-produced Ti-TiB composite samples possess better corrosion resistance than SLM-produced CP-Ti samples in Hank's solution. Due to these tiny TiB and TiB₂ particles acting as the micro-cathode uniformly distributing in titanium matrix, anodic dissolution of titanium matrix in the corrosion process is prominently facilitated in early stages, followed by rapid …

Chemically Stable Artificial Sei For Li-Ion Battery Electrodes, Qinglin Zhang, Lei Han, Jie Pan, Zhi Chen, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

The importance of coating's chemical stability in lithium-ion batteries has been demonstrated by this study. It is well known that the mechanical properties determine the cycle life, and chemical stability or chemical degradation rate determines the calendar life. In this study, we used HfO₂ coatings prepared by atomic layer deposition as an example to show the chemical stability of the coatings for lithium ion battery electrodes.

Catalytic Gasification Of A Powder River Basin Coal With Co2 And H2o Mixtures, Zhang Fan, Fan Maohong, Huang Xin, Morris D. Argyle, Zhang Bo, Brian Towler, Zhang Yulong

Faculty Publications

CO₂ capture and utilization caused more and more public attention because of its environmental impact. The objective of this work was to study the catalytic gasification of a sub-bituminous coal from the Powder River Basin (PRB) using a CO₂ and H₂ O mixture as the gasifying agent. Sodium and iron, in the form of inexpensive compounds, were chosen to catalyze the coal gasification. The experiments were conducted between 700 and 900 °C in a fixed-bed laboratory gasifier under the atmospheric pressure. Results show that the added catalysts had an effect on the composition of gas …

Sorption Of Benzene, Dichloroethane, Chloroform And Dichloromethane By Polyethylene Glycol, Polycaprolactone And Their Copolymers At 298.15 K Using A Quartz Crystal Microbalance, Abhijeet Radhakrishna Iyer

USF Tampa Graduate Theses and Dissertations

Quartz crystal microbalances (QCM) are acoustic wave sensor systems which are used majorly for vapor and liquid sensing. QCM come under the category of thickness shear mode (TSM) sensors. There are several methods to study organic vapor sensing; the QCM method is the one that offers the highest sensitivity and generates the most data. Solubilities of benzene, dichloroethane, chloroform and dichloromethane in polyethylene glycol (PEG), polycaprolactone (PCL), and several di-block PEG/PCL copolymers at 298.15 K are reported. There are literature data available for most of the solvents in the homopolymers PEG and PCL but no literature data is available for …