Chemical Engineering Commons^™

Removal Of Carbamazepine From Drinking Water, Juan Rodriguez, Tom Krumpolc, Adam Johnson, Paola Marrero-Rivera, Alex Gadberry, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-levelexposure. According to the World’s Health Organization (WHO), traces of pharmaceuticalsproducts have been reported in different water sources such as surface waters, wastewater, groundwater, and drinking water.[1] One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribedfor the treatment of seizure disorders, neuropathic pain, and various psychological disorders. It’s mechanism of action …

Sulfate Removal From Mine Impacted Waters, Benjamin Drewry, Jean Morales, Tyler Shock, Derek Richard, Luis Sagarnaga, Benjamin Yeldell

Chemical Engineering Undergraduate Honors Theses

Woo Pig Sulfate (WPS) has developed two methods for reducing levels of calcium sulfate in mine impacted waters, a “hot process” and a two-stage nanofiltration process. Both processes were designed to treat gypsum saturated water that is currently being pumped via interceptor wells to prevent the spread of a sulfate plume into a nearby community. Each solution was designed for Freeport McMoran’s Sierrita mine in Green Valley, Arizona, which was visited in order to gain insight about the problem. Below 250 ppm on the treated stream, nanofiltration and the hot process achieve overall recoveries of 84 and 99%, respectively. The …

Design And Characterization Of A Triple-Input Microfluidic Droplet Trapping Array Towards Multiplexed And Dynamic Single Cell Analysis, Riad Elkhanoufi

Honors Capstones

No abstract provided.

Large-Scale Non-Linear Dynamic Optimization For Combining Applications Of Optimal Scheduling And Control, Logan Daniel Beal

Theses and Dissertations

Optimization has enabled automated applications in chemical manufacturing such as advanced control and scheduling. These applications have demonstrated enormous benefit over the last few decades and continue to be researched and refined. However, these applications have been developed separately with uncoordinated objectives. This dissertation investigates the unification of scheduling and control optimization schemes. The current practice is compared to early-concept, light integrations, and deeper integrations. This quantitative comparison of economic impacts encourages further investigation and tighter integration. A novel approach combines scheduling and control into a single application that can be used online. This approach implements the discrete-time paradigm from …

Optimization-Based Spatial Positioning And Energy Management For Unmanned Aerial Vehicles, Ronald Abraham Martin

Theses and Dissertations

This research applies techniques from the field of optimization to spatial positioning and energy management in Unmanned Aerial Vehicles (UAVs). Two specific areas are treated: optimization of UAV view plans for 3D modeling of infrastructure, and trajectory optimization of solar powered high-altitude long-endurance (HALE) UAVs. Structure-from-Motion (SfM) is a computer vision technique for creating 3D models from 2D images. View planning is the process of planning image sets that will effectively model a given scene. First, a genetic algorithm based view planning approach is demonstrated. A novel terrain simulation environment is developed, and the algorithm is tested at multiple sites …

Lipid Extraction From Spirulina Sp. And Schizochytrium Sp. Using Supercritical Co2 With Methanol, Shihong Liu, Husam A. Abu Hajar, Guy Riefler, Ben J. Stuart

Civil & Environmental Engineering Faculty Publications

Microalgae are one of the most promising feedstocks for biodiesel production due to their high lipid content and easy farming. However, the extraction of lipids from microalgae is energy intensive and costly and involves the use of toxic organic solvents. Compared with organic solvent extraction, supercritical CO₂ (SCCO₂) has demonstrated advantages through lower toxicity and no solvent-liquid separation. Due to the nonpolar nature of SCCO_2, polar organic solvents such as methanol may need to be added as a modifier in order to increase the extraction ability of SCCO₂. In this paper, pilot scale lipid …

Preformed-Particle-Gel Placement And Plugging Performance In Fractures With Tips, Ze Wang, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed-particle gels (PPGs) have been applied for reducing excessive water production caused by fractures in reservoirs. A portion of the fractures existing in reservoirs is composed of a void part and a fracture tip. The PPG placement behavior and plugging performance could be mainly affected by the fracture tips. A fracture with a tip, called a "partially open fracture" in this paper, was designed to investigate the placement and water-plugging performance of PPG. Cylindrical sandstone cores were used to manufacture partially open fractures. Pressure data of PPG injection, post-gel water breakthrough, and stable injection were analyzed to investigate the PPG …

Low Temperature Desiccants In Atmospheric Water Generation., Sunil Gupta

Electronic Theses and Dissertations

Surging global water demand as well as changes to weather patterns and over exploitation of natural water sources, such as ground water, has made potable water a critical resource in many parts of the World already – one rapidly heading towards a crisis situation. Desalination has been adopted as a solution – this is however energy intensive and impractical for most of the developing countries - those most in need of water. A renewable source of energy is solar thermal and solar photovoltaic. A plentiful source of water is the humidity in the atmosphere. This research is to push the …

Determining The Degree Of [001] Preferred Growth Of Ni(Oh)2 Nanoplates, Taotao Li, Ning Dang, Wanggang Zhang, Wei Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Determining the degree of preferred growth of low-dimensional materials is of practical importance for the improvement of the synthesis methods and applications of low-dimensional materials. In this work, three different methods are used to analyze the degree of preferred growth of the Ni(OH)₂ nanoplates synthesized without the use of a complex anion. The results suggest that the preferred growth degree of the Ni(OH)₂ nanoplates calculated by the March parameter and the expression given by Zolotoyabko, which are based on the analysis and texture refinement of the X-ray diffraction pattern, are in good accordance with the results measured by …

Cellulose-Specific Type B Carbohydrate Binding Modules: Understanding Oligomeric And Non-Crystalline Substrate Recognition Mechanisms, Abhishek A. Kognole, Christina M. Payne

Chemical and Materials Engineering Faculty Publications

Background: Effective enzymatic degradation of crystalline polysaccharides requires a synergistic cocktail of hydrolytic enzymes tailored to the wide-ranging degree of substrate crystallinity. To accomplish this type of targeted carbohydrate recognition, nature produces multi-modular enzymes, having at least one catalytic domain appended to one or more carbohydrate binding modules (CBMs). The Type B CBM categorization encompasses several families (i.e., protein folds) of CBMs that are generally thought to selectively bind oligomeric polysaccharides; however, a subset of cellulose-specific CBM families (17 and 28) appear to bind non-crystalline cellulose more tightly than oligomers and in a manner that discriminates between surface topology.

Results: …

High-Throughput Assessment Of A Novel, Thiol-Acrylate Hydrogel For Tumor Spheroid Synthesis In A Microfluidic Device, Nathan Daniel Kersker

LSU Master's Theses

The extracellular environment plays an important role in regulating cell behavior. The mechanical, structural, and compositional properties of the extracellular matrix can determine the fate of the growing cells. Standard two-dimensional culturing in a flask fails to represent a native cellular environment. To create the native environment suitable for cells, hydrogels were previously studied. One of the most extensively studied synthetic hydrogels was a poly(ethylene glycol diacrylate) (PEGDA) hydrogel. However, the need for UV polymerization may introduce unwanted changes in cell morphology and viability. The hydrogel being proposed was a form of a thiol-acrylate hydrogel that can eliminate this problem …

Highly Porous Ceramic Material And Method Of Using And Forming The Same, Alan W. Weimer, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present invention generally relates to porous ceramic material and to methods of making and using the material. More particularly, the invention relates to methods of forming ceramic materials by depositing material, using atomic layer deposition, onto a sacrificial substrate and to ceramic materials having controlled wall thickness, relatively large pores, and high surface area by weight.

Dynamic Optimization Of High-Altitude Solar Aircraft Trajectories Under Station-Keeping Constraints, R. Abraham Martin, Nathaniel S. Gates, Andrew Ning, John Hedengren

Faculty Publications

This paper demonstrates the use of nonlinear dynamic optimization to calculate energy-optimal trajectories for a high-altitude, solar-powered unmanned aerial vehicle (UAV). The objective is to maximize the total energy in the system while staying within a 3 km mission radius and meeting other system constraints. Solar energy capture is modeled using the vehicle orientation and solar position, and energy is stored both in batteries and in potential energy through elevation gain. Energy capture is maximized by optimally adjusting the angle of the aircraft surface relative to the sun. The UAV flight and energy system dynamics are optimized over a 24 …

Linking Lignin Source With Structural And Electrochemical Properties Of Lignin-Derived Carbon Materials, Wenqi Li, Yan Zhang, Lalitendu Das, Yikai Wang, Mi Li, Namal Wanninayake, Yunqiao Pu, Doo Young Kim, Yang-Tse Cheng, Arthur J. Ragauskas, Jian Shi

Biosystems and Agricultural Engineering Faculty Publications

Valorization of lignin to high-value chemicals and products along with biofuel production is generally acknowledged as a technology platform that could significantly improve the economic viability of biorefinery operations. With a growing demand for electrical energy storage materials, lignin-derived activated carbon (AC) materials have received increasing attention in recent years. However, there is an apparent gap in our understanding of the impact of the lignin precursors (i.e., lignin structure, composition and inter-unit linkages) on the structural and electrochemical properties of the derived ACs. In the present study, lignin-derived ACs were prepared under identical conditions from two different lignin …

Nanoparticle Catalytic Enhancement Of Carbon Dioxide Reforming Of Methane For Hydrogen Production, Nicholas Groden

Doctoral Dissertations

The U.S. produces 5559.6 million metric tons of carbon dioxide annually, of which 21% is produced by industrial processes. Steam reforming, an industrial process that accounts for 95% of all hydrogen production in industry, produces 134.5 million metric tons of carbon dioxide or around 11% of the total carbon dioxide produced by industry. This carbon dioxide is then either emitted or goes through a sequestration process that accounts for 75% of the plant's operational costs. An alternative reaction to steam reforming is dry reforming, which utilizes carbon dioxide rather than emitting it and can be used in conjunction with current …

Effect Of Cross-Section-Change Induced Advective Flow On The Primary Dendrite Array Morphology Of Hypoeutectic Pb-Sb Alloys During Directional Solidification, K. Pandit, S. R. Upadhyay, Surendra N. Tewari

Chemical & Biomedical Engineering Faculty Publications

The morphology and distribution of primary dendrites have been examined in Pb-2.2, 5.8 and 10.8 wt. pct. Sb alloy samples directionally solidified (DSed) in ampoules shaped like an hour-glass to examine the influence of cross-section change induced advective flow on the cellular/dendritic interface. This sample design increases the advective flow of the melt towards the array tips, as the liquid-solid interface enters the neck of the ampoule, and then decreases it as the interface exits the neck. The warm solute-rich melt flowing towards the growth front suppresses the extent of side-branching, decreases the primary dendrite spacing, and increases the primary …

Apparatus, Methods And Systems For Fabricating Thin Nanoporous Membranes, Sankar Nair, Jeffrey H. Drese, Kiwon Eum, Ryan P. Lively, Ali A. Rownaghi, Yash Tamhankar, Shaowei Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Embodiments of the present disclosure provide apparatuses, methods and systems for scalable fabrication of thin, nanoporous membranes useful in industrial applications. One embodiment of the present disclosure provides a molecular separation device configured to efficiently separate molecular species. In this particular embodiment, porous hollow fibers form a supporting scaffold for synthesis of a molecular organic framework (MOF) membrane. The MOF membrane may be synthesized on the inner or outer porous hollow fiber surface as well as within the porous fiber wall. Embodiments of the present disclosure provide a variety of methods for producing the aforementioned molecular separation devices as well …

Rate-Determining Step And Active Sites Probing For Platinum-Group-Metal Free Cathode Catalyst In Fuel Cell, Yechuan Chen

Chemical and Biological Engineering ETDs

With the increasing demand on renewable energy, the fuel cell has attracted more and more interests because of its large power density and controllable size. However, the insufficiency of element abundance and unstable expensive price of conventional platinum-based electrocatalysts used in anode and cathode makes it essential to find their substitutes. As one of the most promising candidates to be used in cathode for oxygen reduction reaction (ORR), iron-nitrogen-carbon (Fe-N-C) catalysts have been widely investigated and get commercialized recently, but still lacks comprehensive understanding on the kinetic mechanism.

This dissertation has been divided into three parts with a discussion on …

Micro-Flow Nanocatalysis: Synergic Effect Of Tfoh@Spions And Micro-Flow Technology As An Efficient And Robust Catalytic System For The Synthesis Of Plasticizers, Maryam Tashi, Behnaz Shafiee, Yoshie Sakamaki, Ji-Yun Hu, Zachary Heidrick, Ahmad R. Khosropour, M. Hassan Beyzavi

Chemistry & Biochemistry Faculty Publications and Presentations

The combination of continuous flow technology with immobilizing of only 0.13 mol% of triflic acid (TfOH) on silica-encapsulated superparamagnetic iron oxide nanoparticles (SPIONs) under solvent-free conditions successfully provided a powerful, efficient, and eco-friendly route for the synthesis of plasticizers. The turnover frequency value in micro-flow conditions varied in the range of 948.7 to 7384.6 h−1 compared to 403.8 to 3099 h−1 for in-flask. This technique works efficiently, encouraging future applications of micro-flow nano-catalysis in green chemistry.

An Investigation Of Conformality Of The Core-Shell Polymer Electrolyte Membrane (Pem) Fuel Cell Catalysts By Sputter Deposition, Mesut Yurukcu

Theses and Dissertations

Core-shell nanorod array geometry can offer enhanced durability for polymer electrolyte membrane (PEM) fuel cell electrodes if a catalyst shell is conformally coated around the nanorod support base. Uniform catalyst shell coating can minimize the interaction of acidic fuel cell medium with the nanorod base and can improve the overall electrocatalyst electrode stability. However, fabrication of the conformal shell layers on nanorod arrays using physical vapor deposition (PVD) methods (e.g. sputtering, thermal evaporation) has been a formidable task. In order to assess the PVD conditions for the production of conformal shell coatings, Monte Carlo simulation methods (MC) can provide useful …