Extraction-Photometric Determination Of Bismuth (Iii) With 1-(2-Pyridylaze)-2-Naphthol,
2019
Tashkent State Technical University, Uzbekistan
Extraction-Photometric Determination Of Bismuth (Iii) With 1-(2-Pyridylaze)-2-Naphthol, Turabdjanov Sadritdin, Otakuzieva Vazira, Giyasov Anvar, Rakhmatullaeva Nargiza
CHEMISTRY AND CHEMICAL ENGINEERING
The conditions of selective extraction of the bismuth (III) by inert organic solvents in the presence of DMFA are established. The conditions for complex formation of the bismuth (III) with the PAN directly in the organic phase are found. It is possible to increase the sensitivity of the methodology using more sensitive azoreagents that have not found the application in practice due to their low selectivity. The effect of extraneous ions on the results of the definition of the bismuth (III) with the PAN azoreagent is investigated. In the presence of large amounts of extraneous ions the determination of bismuth …
Analysis Of Experimental Research In Determining Bubbling Extractor Mixing Zones’ Sizes,
2019
Fergana Polytechnic Institute, Uzbekistan
Analysis Of Experimental Research In Determining Bubbling Extractor Mixing Zones’ Sizes, Karimov Ikromali
CHEMISTRY AND CHEMICAL ENGINEERING
In the inner mixing zone of the tested suspended extractor, the fluid and gas flows in the stream and the external mixing zone moves in a contradictory flow. In order for these mixing zones to operate equally in hydrodynamic mode, their gas values should be equal. This is achieved by the correct selection of the dimensions of the mixing zones of the liquid and gas. The article summarizes the results of the study of the measurement of the mixing zones of the apparatus.
Composite Materials Based On Twaron And Nano Materials,
2019
The British University in Egypt
Composite Materials Based On Twaron And Nano Materials, Omnia Hamdy, Remon A. Mankarious, M. A. Radwan, M. A. Sadek, Hany A. Elazab
Chemical Engineering
This research aims to participate in producing body shield that can overcome pervious drawbacks using behaviour of shear thickening fluid. Initially, the rheological behaviour of silica-polyethylene glycol shear thickening fluid is examined at different concentrations. Then, ballistic fabric samples are impregnated into silica-polyethylene glycol shear thickening fluid at various concentrations of silica and tested using gas gun simulating real ballistic threat. After that, the impact of rubbery hot water pack filled with around 66.67 wt% starch in water is tested using gas gun. Results showed as the concentration of silica increases, the indentation depth in the impregnated fabric decreases which …
Periodic Operation Of A Dynamic Dna Origami Structure Utilizing The Hydrophilic–Hydrophobic Phase‐Transition Of Stimulus‐Sensitive Polypeptides,
2019
Technische Universität München
Periodic Operation Of A Dynamic Dna Origami Structure Utilizing The Hydrophilic–Hydrophobic Phase‐Transition Of Stimulus‐Sensitive Polypeptides, Marisa A. Goetzfried, Kilian Vogele, Andrea Mückl, Marcus Kaiser, Nolan B. Holland, Friedrich C. Simmel, Tobias Pirzer
Chemical & Biomedical Engineering Faculty Publications
Dynamic DNA nanodevices are designed to perform structure‐encoded motion actuated by a variety of different physicochemical stimuli. In this context, hybrid devices utilizing other components than DNA have the potential to considerably expand the library of functionalities. Here, the reversible reconfiguration of a DNA origami structure using the stimulus sensitivity of elastin‐like polypeptides is reported. To this end, a rectangular sheet made using the DNA origami technique is functionalized with these peptides and by applying changes in salt concentration the hydrophilic–hydrophobic phase transition of these peptides actuate the folding of the structure. The on‐demand and reversible switching of the rectangle …
A Review Of 30 Years Of Research Using The Cpd Model,
2019
Brigham Young University
A Review Of 30 Years Of Research Using The Cpd Model, Thomas H. Fletcher
Faculty Publications
The chemical percolation devolatilization (CPD) model for coal pyrolysis was first published in 1989, and a completed version that included the vapor–liquid equilibrium model and cross-linking model was published in 1992. The CPD model was one of three pyrolysis models developed using a lattice model to account for the chemical structure of the coal and was directly based on solid-state 13C nuclear magnetic resonance (NMR) measurements of the coal structure. A correlation of coal structure parameters measured by NMR spectroscopy was performed to permit use of the CPD model to determine pyrolysis rates and yields of tars and light …
Effects Of Reservoir Conditions And Trace Co-Contaminant Gases On Geological Carbon Sequestration,
2019
University of South Florida
Effects Of Reservoir Conditions And Trace Co-Contaminant Gases On Geological Carbon Sequestration, Ram Kumar
USF Tampa Graduate Theses and Dissertations
Geological carbon sequestration in a saline formation is a promising technology for large-scale carbon dioxide (CO2) mitigation. Several factors such as temperature, pressure, salinity, hydraulic conductivity, and mineralogy of a formation affect the CO2 sequestration in saline formations. These factors can vary widely depending upon the type of formation or the degree of heterogeneity within a formation. In addition to these properties of the repositories, the CO2-rich flue gas streams captured from point sources often contains small amounts of impurities such as sulfur oxides (SOx) and nitrogen oxides (NOx), which may have serious implications on the chemistry of the repositories …
A Review Of Materials For Managing Bone Loss In Revision Total Knee Arthroplasty,
2019
Missouri University of Science and Technology
A Review Of Materials For Managing Bone Loss In Revision Total Knee Arthroplasty, Romina Shafaghi, Omar Rodriguez, Emil H. Schemitsch, Paul Zalzal, Stephen D. Waldman, Marcello Papini, Mark R. Towler
Chemical and Biochemical Engineering Faculty Research & Creative Works
In 2014–2015, 61,421 total knee arthroplasties (TKAs) were performed in Canada; an increase of about 20% over 2000–2001. Revision total knee arthroplasties (rTKAs) accounted for 6.8% of TKAs performed between 2014 and 2015, and this is estimated to grow another 12% by 2025. rTKAs are typically more complicated than primary TKAs due to the significant loss of femoral and tibial bone stock. The escalating demand and limitations associated with total knee arthroplasty and their revision drives the development of novel treatments. A variety of materials have been utilized to facilitate regeneration of healthy bone around the site of a knee …
Microwave Assisted Synthesis Of Binary Metallic Oxides For Catalysis Applications,
2019
Missouri University of Science and Technology
Microwave Assisted Synthesis Of Binary Metallic Oxides For Catalysis Applications, Abdelrahman Mostafa Kamal, Sherif Bahgat, Mohamed Hammam, M. A. Radwan, M. A. Sadek, Hany A. Elazab
Chemical and Biochemical Engineering Faculty Research & Creative Works
Herein, versatile, and reproducible method to prepare binary metal oxides via microwave assisted synthesis. Catalysts are substances that basically speeds up chemical reactions. Ideally, bonds are formed between the catalysts and the reactants. Also, catalysts permit formation of products from the reactants. These formed products, splits off the catalyst without affecting or changing it. Catalytic kinetics studies the correlate chemical reaction rate with some properties of reactants and/or products for instance, temperature, concentration and pressure. The aim of the project is to prepare pure and bi-metal iron-based catalyst by co-precipitation method and to characterize the prepared sample using X-ray diffraction. …
Composite Materials Based On Twaron And Nano Materials,
2019
Missouri University of Science and Technology
Composite Materials Based On Twaron And Nano Materials, Omnia Hamdy, Remon A. Mankarious, M. A. Radwan, M. A. Sadek, Hany A. Elazab
Chemical and Biochemical Engineering Faculty Research & Creative Works
This research aims to participate in producing body shield that can overcome pervious drawbacks using behavior of shear thickening fluid. Initially, the rheological behavior of silica-polyethylene glycol shear thickening fluid is examined at different concentrations. Then, ballistic fabric samples are impregnated into silica-polyethylene glycol shear thickening fluid at various concentrations of silica and tested using gas gun simulating real ballistic threat. After that, the impact of rubbery hot water pack filled with around 66.67 wt% starch in water is tested using gas gun. Results showed as the concentration of silica increases, the indentation depth in the impregnated fabric decreases which …
Simulated Biological Fluid Exposure Changes Nanoceria’S Surface Properties But Not Its Biological Response,
2019
University of Kentucky
Simulated Biological Fluid Exposure Changes Nanoceria’S Surface Properties But Not Its Biological Response, Robert A. Yokel, Matthew L. Hancock, Benjamin Cherian, Alexandra J. Brooks, Marsha L. Ensor, Hemendra J. Vekaria, Patrick G. Sullivan, Eric A. Grulke
Pharmaceutical Sciences Faculty Publications
Nanoscale cerium dioxide (nanoceria) has industrial applications, capitalizing on its catalytic, abrasive, and energy storage properties. It auto-catalytically cycles between Ce3+ and Ce4+, giving it pro-and anti-oxidative properties. The latter mediates beneficial effects in models of diseases that have oxidative stress/inflammation components. Engineered nanoparticles become coated after body fluid exposure, creating a corona, which can greatly influence their fate and effects. Very little has been reported about nanoceria surface changes and biological effects after pulmonary or gastrointestinal fluid exposure. The study objective was to address the hypothesis that simulated biological fluid (SBF) exposure changes nanoceria’s surface properties …
Alterations In Phenotype And Gene Expression Of Adult Human Aneurysmal Smooth Muscle Cells By Exogenous Nitric Oxide,
2019
Cleveland State University
Alterations In Phenotype And Gene Expression Of Adult Human Aneurysmal Smooth Muscle Cells By Exogenous Nitric Oxide, Kurt Farrell, Phillip Simmers, Gautam Mahajana, Ludovic Boytard, Andrew Camardo, Jyotsna Joshi, Anand Ramamurthi, Florence Pine, Chandrasekhar R. Kothapalli
Chemical & Biomedical Engineering Faculty Publications
Abdominal aortic aneurysms (AAA) are characterized by matrix remodeling, elastin degradation, absence of nitric oxide (NO) signaling, and inflammation, influencing smooth muscle cell (SMC) phenotype and gene expression. Little is known about the biomolecular release and intrinsic biomechanics of human AAA-SMCs. NO delivery could be an attractive therapeutic strategy to restore lost functionality of AAA-SMCs by inhibiting inflammation and cell stiffening. We aim to establish the differences in phenotype and gene expression of adult human AAA-SMCs from healthy SMCs. Based on our previous study which showed benefits of optimal NO dosage delivered via S-Nitrosoglutathione (GSNO) to healthy aortic SMCs, we …
Novel Adsorbent For Industrial Wastewater Treatment Applications,
2019
Missouri University of Science and Technology
Novel Adsorbent For Industrial Wastewater Treatment Applications, Ahmed Y. Zakaria, Dalia A. Ali, Islam M. Al-Akraa, Hoda A. Elsawy, Hany A. Elazab
Chemical and Biochemical Engineering Faculty Research & Creative Works
In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …
Decorative Articles Based On Polymeric Materials,
2019
The British University in Egypt
Decorative Articles Based On Polymeric Materials, Yaser M. Asal Mr., M. A. Radwan, Hany A. Elazab Dr, Bassant Hussein, Mohamed A. Sadek
Chemical Engineering
The aim of the research is to create decorative articles based on polymeric materials, study the effects of fillers and the type of moulds that it can cope with the exothermic reaction nature of resin to create a scientific background on the usage of the resins in daily life products. The polymeric materials that will be concentrated on are the unsaturated polyester resins and epoxy resins. The unsaturated polyester is of many types and chemical constituents, the used experimentally is a general-purpose type and the epoxy also have different types and the used is a commercially 3D floor coating type. …
Extraction And Visualization Of Orientation Data From Virtual Geologic Surfaces With Matlab®,
2019
Missouri University of Science and Technology
Extraction And Visualization Of Orientation Data From Virtual Geologic Surfaces With Matlab®, Avery J. Welker, John Patrick Hogan, Andreas Eckert
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
High-resolution visualization of surfaces of geologic interest, at a multitude of scales, using 3D point cloud technologies provides an opportunity to analyze spatial relationships of surfaces using orientation data. We present a MATLAB® script that produces planar geologic attitude data (e.g., strike, dip, and dip-direction data) from 3D datasets (e.g., point clouds, 3D scanning). The method utilizes Cartesian coordinates of triangular planar surfaces and converts them into matrices of conventional geologic attitude data. Spatial relationships among data points can be investigated, using polar tangent diagrams, stereographic analysis, or geologic curvature analysis. We utilize this script to create "synthetic" graphical plots …
A Kinetic And Thermodynamic Model Of Ethylene Dichloride Pyrolysis.,
2019
University of Louisville
A Kinetic And Thermodynamic Model Of Ethylene Dichloride Pyrolysis., Travis J Czechorski
Electronic Theses and Dissertations
Ethylene dichloride (EDC) is a precursor for the production of vinyl chloride (VCM) which is subsequently polymerized to form polyvinyl chloride (PVC). To convert EDC to VCM, EDC undergoes a pyrolysis process in the absence of oxygen at temperatures exceeding 500C. However, process yields are limited by the uncontrolled production of side-products that can degrade the quality of PVC and poison the reactor. Thus, tight process controls and costly separations guided by heuristics and plant operator experience are used to optimize EDC pyrolysis. To improve the process, I have programed a kinetic model of EDC pyrolysis based upon estimations of …
Decorative Articles Based On Polymeric Materials,
2019
Missouri University of Science and Technology
Decorative Articles Based On Polymeric Materials, Bassant Hussein, Yaser M. Asal, M. A. Radwan, M. A. Sadek, Hany A. Elazab
Chemical and Biochemical Engineering Faculty Research & Creative Works
The aim of the research is to create decorative articles based on polymeric materials, study the effects of fillers and the type of moulds that it can cope with the exothermic reaction nature of resin to create a scientific background on the usage of the resins in daily life products. The polymeric materials that will be concentrated on are the unsaturated polyester resins and epoxy resins. The unsaturated polyester is of many types and chemical constituents, the used experimentally is a general-purpose type and the epoxy also have different types and the used is a commercially 3D floor coating type. …
The Ability Of Β-Hairpin Peptides To Function As Degradation-Resistant, Cell-Penetrating Peptides And Their Potential As Proteolysis Targeted Chimeras,
2019
Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, Louisiana.
The Ability Of Β-Hairpin Peptides To Function As Degradation-Resistant, Cell-Penetrating Peptides And Their Potential As Proteolysis Targeted Chimeras, Jeffery C. Anderson
Honors Capstones
No abstract provided.
Development And Characterisation Of High Surface Energy Microstructured Sol-Gel Coatings For Sensing Applications,
2019
Technological University Dublin
Development And Characterisation Of High Surface Energy Microstructured Sol-Gel Coatings For Sensing Applications, Emma Machugh
Doctoral
This study investigates the development of high surface energy photoreactive organic inorganic hybrid sol-gel coatings for the microstructuration of high-resolution microfluidic platforms and optofluidic biosensor platforms by standard photolithography processes. To achieve this, the first step of our work consisted of identifying the fundamental physico chemical processes governing the structuration and surface properties of hybrid organic inorganic sol-gel coatings. For this purpose, a reference material based on the combination of an organosilane (3-Methacryloxypropytrimethoxysilane, MAPTMS) and a transition metal (zirconium propoxide, ZPO), was firstly developed and characterised. It was highlighted that chemical, physical and combined physical and chemical processes can be …
Selection Of Optimal Conditions For The Cultivation Of Insect Cells For Use In Biotechnology,
2019
Institute of the Chemistry of Plant Substances, Tashkent, Uzbekistan
Selection Of Optimal Conditions For The Cultivation Of Insect Cells For Use In Biotechnology, Khasanоv Shuhrat, Sasmakоv Sobir, Abdurakhmanоv Jaloliddin, Ashirоv Оybek
CHEMISTRY AND CHEMICAL ENGINEERING
The article discusses use of the insect cell cultures for biotechnological purposes. Optimal conditions for the cultiva-tion of Spodoptera exigua and Lymantria dispar cell lines were selected.
Development Of A Method Of Oriented Immobilization Of Lipases On A Solid Carrier,
2019
Institute of Bioorganic Chemistry, Tashkent, Uzbekistan
Development Of A Method Of Oriented Immobilization Of Lipases On A Solid Carrier, Ziyavitdinov Jamolitdin Fazlitdinovich, Inogamov Utkir Kudratillayevich, Berdiev Nodir Sharifovich, Ishimov Uchkun Jomuradovich
CHEMISTRY AND CHEMICAL ENGINEERING
The methods of oriented immobilization of lipases on a solid carrier - Silochrome C-80 have been developed. The resulting sorbents were tested in the process of obtaining biodiesel from cotton oil. It was shown that immobilized lipase on Silochrome C-80 with NH2 group has the highest transetrification ability and stability, while in sorbents with the enzyme immobilized with -COOH and -SH groups this value was 87 and 53%, respectively. Biocatalysis using an affinity sorbent of immobilized lipase with the –NH2 group has a high operational stability, which, after 240 hours of operation, retains more than 50%, and after 480 hours, …
