Chemical Engineering Commons^™

Image Processing Of Technological Objects, Lyudmila Petrovna Varlamova

Chemical Technology, Control and Management

The article considers the problem of creating a smoke detection and fire detection system for technological objects. Fire detection is carried out using a vision system. Monitoring of technological objects is carried out using an unmanned aerial vehicle. For further actions, processing and classification of images is necessary. When observing the technological apparatuses of the chemical and petrochemical industry, problems arise associated with the large size, distribution and extent of objects. There may be situations in which there are violations of the technological regulations and, as a result, the occurrence of fire, fire and smoke. Using the technology of unmanned …

Synthesis Of Carbide Ceramics Via Reduction And Carburization Of Oxyanions Adsorbed Onto An Activated Carbon Matrix, Grant Wallace

Graduate Theses & Non-Theses

Carbide ceramics rank high among the hardest and most chemically resistant materials. Their ability to resist physical and chemical attack under conditions where more traditional materials fail make them very desirable for a number of industrial applications. Their use is limited, however, due to the expensive and energy-intensive methods required to produce them commercially.

A more versatile and energy-efficient process for commercial carbide production has been developed by synthesizing micron/sub-micron carbide ceramic particles through the adsorption and subsequent carburization of anions on an activated carbon matrix. Oxyanion solutions containing sodium tungstate, sodium molybdate, or sodium metasilicate are adsorbed onto activated …

A Study Of The Thermodynamics Of Small Systems And Phase Transition In Bulk Square Well-Hard Disk Binary Mixture, Gulce Kalyoncu

Graduate Theses and Dissertations

Under the umbrella of statistical mechanics and particle-based simulations, two distinct problems have been discussed in this study. The first part included systems of finite clusters of three and 13 particles, where the particles are interacting via Lennard Jones potential. A machine learning technique, Diffusion Maps (DMap), has been employed to the large datasets of thermodynamically small systems from Monte Carlo simulations in order to identify the structural and energetic changes in these systems. DMap suggests at most three dimensions are required to describe and identify the systems with 9 (N = 3) and 39 (N = 13) dimensions. At …

Nonlinear Dimensionality Reduction For The Thermodynamics Of Small Clusters Of Particles, Aditya Dendukuri

Graduate Theses and Dissertations

This work employs tools and methods from computer science to study clusters comprising a small number N of interacting particles, which are of interest in science, engineering, and nanotechnology. Specifically, the thermodynamics of such clusters is studied using techniques from spectral graph theory (SGT) and machine learning (ML). SGT is used to define the structure of the clusters and ML is used on ensembles of cluster configurations to detect state variables that can be used to model the thermodynamic properties of the system. While the most fundamental description of a cluster is in 3N dimensions, i.e., the Cartesian coordinates of …

What Difference Does A Catalyst Make?, Tammy Guthrie, Mike Jackson, Holly Haney

High School Lesson Plans

Students will use different catalysts for the decomposition of Hydrogen Peroxide, to determine if different catalysts affect the energy that is generated during the reaction.

Developing A New Formula For Predicting Oil Recovery Factor In Water Flooded-Heterogeneous Reservoirs, Mohamed Khaled Aljifri

Theses

In this work, two sets of empirical correlations were developed for predicting the recovery factor (RF) in water-flooded layered oil reservoirs. The first set of these correlations encompasses four key parameters believed to have a significant impact on waterflooding performance, namely, reservoir heterogeneity (permeability variation coefficient), injected water viscosity, permeability anisotropy (ratio of vertical permeability to horizontal permeability), and water injection rate. This first set consists of two expanded forms, one for predicting the RF at water breakthrough time (BT) and the other for predicting the RF at the end of the project (EOP). Out of the aforementioned four key …

Solid Materials Discovery For Thin Films, Oxide Catalysts, And Polymer Sealants, Benjamin Ruiz-Yi

Theses and Dissertations

Solid materials are made up of multiple classes, including metals, ceramics, and polymers. While each class can be developed for general purpose applications or highly specialized, discovery of new materials in order to improve upon desired properties is a non-trivial task for any type of material. A wide variety of materials encompass expansive design spaces, consisting of parameters such as chemical compositions, synthesis conditions, and post-processing. Due to this, narrowing down the design space to fit within a given figure-of-merit and economic viability becomes time consuming at best and infeasible at worst. High-throughput experimentation

High-throughput experimentation (HTE) is a methodology …

Synthesis Of Polyurethane Incorporated By Calcium Oxide And Magnesium Oxide For Heavy Metal Removal From Water, Fard Mohsen Vafaei

Student Works (2020-2029)

Water contaminated by heavy metals such as copper, lead, nickel, and cadmium has significant adverse impacts on receiving water. In recent years, various methods, such as adsorption, chemical precipitation, and ion exchange, have been extensively studied for the elimination of heavy metals. Adsorption is one of the numerously and diversely reported mechanisms of removing heavy metals due to its simplicity and costeffectiveness. In this study, highly permeable rigid polyurethanes (PU) incorporating calcium oxide (CaO) (PU/CaO) composite materials were prepared via a facile and economic one-pot synthesis method and characterized for remediation of heavy metal from water. To investigate the effect …

The Response Of Synechococcus Sp. Pcc 7002 To Micro-/Nano Polyethylene Particles - Investigation Of A Key Anthropogenic Stressor, Mary C. Machado, Gina V. Vimbela, Tania T. Silva-Oliveira, Arijit Bose, Anubhav Tripathi

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Microplastics or plastic particles less than 5 mm in size are a ubiquitous and damaging pol- lutant in the marine environment. However, the interactions between these plastic particles and marine microorganisms are just starting to be understood. The objective of this study was to measure the responses of a characteristic marine organism (Synechococcus sp. PCC 7002) to an anthropogenic stressor (polyethelene nanoparticles and microparticles) using molecular techniques. This investigation showed that polyethylene microparticles and nanoparticles have genetic, enzymatic and morphological effects on Synechococcus sp. PCC 7002. An RT-PCR analysis showed increases in the expression of esterase and hydro- lase genes …

Fundamental Studies Of Oxygen Electrocatalysis In Alkaline Electrochemical Cells, Victoria F. Mattick

Theses and Dissertations

Until recently the world’s main source of energy has been fossil fuels, such as coal and petroleum. However, these energy sources are polluting our planet, becoming scarce and increasingly inaccessible, and are costly to extract. Therefore, much attention has been directed to harvesting clean, abundant, and renewable energy, such as solar rays and wind. However, the intermittency of solar and wind power generation requires an effective energy buffering solution (aka energy storage) to become efficient and reliable. With high efficiency and energy density, rechargeable batteries and reversible fuel cells are two of the best methods for this purpose. Unfortunately, a …

Investigation Of Oxidized Carbon Supported Au Catalysts Synthesized Via Strong Electrostatic Adsorption Of Au(En)2Cl3 For The Hydrochlorination Of Acetylene To Vinyl Chloride Monomer, Sean Reginald Noble

Theses and Dissertations

Over 20 million tons of vinyl chloride monomer (VCM) is produced every year using acetylene hydrochlorination using a supported mercuric chloride catalyst. During this process mercury is reduced and sublimes into the environment harming all living animals and humans, so carbon-supported Au catalysts have been developed in attempts to replace it. Various techniques have been used to make these catalysts including several variations of dry impregnation. In this study we investigate the ability of Strong Electrostatic Adsorption (SEA) of Au(en)₂Cl₃ onto various supports to demonstrate the ability to rationally and consistently synthesize gold catalysts with ultra-small particle …

Theoretical Investigation Of The Biomass Conversion On Transition Metal Surfaces Based On Density Functional Theory Calculations And Machine Learning, Wenqiang Yang

Theses and Dissertations

During the past decades, heterogenous catalyzed conversion of biomass to hydrocarbons with similar or identical properties to conventional fossil fuels has gained significantly academic and industrial interest. However, the conventional heterogeneous catalysts such as sulfided NiMo/Al₂O₃ and CoMo/Al₂O₃ used have various drawbacks, such as short catalyst lifetime and high sulfur content of product. To overcome the limitations of the conventional sulfided catalysts, new catalysts must be developed, which requires a better understanding of the reaction mechanism of the biomass conversion. Based on density functional theory, in this thesis, we reported a computational calculation study …

Syntheses, Characterisations And Electrochemical Studies Of Nickel(Ii) And Cobalt(Ii)-Ligand Assisted Cooperative Complexes, Subramaniam Jeevithra Dewi

Student Works (2020-2029)

A newly designed tetradentate ligand L1 (L1 = 3,6-bis(pyrazol-1-yl)-pyridazine) which offers multinucleation sites on its moiety structure has been prepared. The reaction of L1 with different molar ratio of nickel and cobalt salts lead to the formation of di- and tetranuclear complexes [NiII 2(L1)2(CH3CN)4](PF6)4 (1), [NiII 4(L1)4(μ-OH)4](ClO4)4 (2) and [CoII/III(L1)4(μ-CH3O)2(μ-O)2](PF6)3(NO3) (3), which served as the attempt to design of catalysts based on cheap and earth-abundant metals for carbon dioxide reduction. The presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as the base controls the nuclearity of the complex formation. In the absence of DBU, complex 1 was formed in dinuclear fashion whereas complex 2 …

Simulation And Optimal Control Of Crude Oil Separation Process At Offshore Facilities To Improve Efficiency Of Oil And Condensate Recovery, Yee Kai Chin

Student Works (2020-2029)

Crude oil separation process is the most crucial process in offshore production facilities in ensuring the well fluid is separated efficiently and persistently. Waxy crude or sluggish feed stream is the major disturbance that could cause operational issues and production loss due to process upset. The main objective of this research is to model offshore crude oil separation process and introduce state space control to optimize the control of total liquid and water level within the permissible range as well as to evaluate the effect of disturbances to the controls. This work presents two different modelling methods in developing three-phase …

Physical And Chemical Characteristics Of Supramolecular Complexes Of Glycirrizinic Acid With Phytohormones, Djuraev Tulqin, Esanov Rakhmatillo, Gafurov Makhmudjon, Kushiev Khabibjon

CHEMISTRY AND CHEMICAL ENGINEERING

The process of formation of supramolecular complexes of glycyrrhizinic acid with some phytohormones (indolylacetic acid, indolylbutyric acid, α-naphthyl acetic acid and kinetin) were studied with the aim of creation the plant growth stimulator. The complexes structure was studied using IR and UV spectroscopy methods. The prepared compounds described by some physicochemical parameters. The stability constants and stoichiometric composition of complexes were determined in an aqueous solution at pH of 7,2 using UV spectrometry method. In result, all complexes have composition as 1:1 ratio, except the kinetin complex which has 2:1 ratio. The stability constants were equal: KGA:IAA=1,86±1×104; KGA:IBA=2,51±1×103; KGA:NAA =2,70±1×103 …

Study Of The Process For The Removal Of Dyeing Matters Of The Plant Occimum Basilicum L. Lamiaceae, Usmonjonova Khulkar, Atkhamova Saida, Dodaev Kuchkor

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work is dedicated isolation of anthocyanins by ethanol from herbal plant of Occimum basilicum L. Lamiaceae basis. The were studied influencing of temperature, concentration of ethanol to isolation of anthocyanins. There were passed investigations on studying influence level of heating and hydromodule system of rav material-solvent to maximal isolating of anthocyanins. The colors define by fotokolorometrical method at wave length 400-600 nm. There are shown at 540 nm maximal peak of anthocyanins and it is geven as a grapfical diagram. From the obtained depends on content of alcohol in aquatic solution from outlet of colors is …

The Research Of Conditions For The Formation Of Phenol Formaldehyde Resins Modified With Hydroxyl Containg Polyether Polyol, Magrupov Farkhad, Umarov Sherali, Tohirov Murodjon, Radjabova Zukhra

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was to study the conditions of copolycondensation of phenol alcohol with hydroxyl-containing polyether polyol in the presence of maleic anhydride chain extender in order to obtain modified thermoset phenolic-formaldehyde oligomers. Investigation of the dependence of the content of free phenol, formaldehyde and methylol groups on time during the synthesis of the modified phenol-formaldehyde resin with the ratios hydroxyl-containing polyether polyol:phenol alcohol 1:60 mol/mol and 1:100 mol/mol. It was revealed that maleic anhydride, present in the reaction medium as a copolycondensation catalyst, also participates in copolycondensation reactions as a chain extender. Moreover, as the molar fraction …

Vinylation By 3,6-Dimetyloctin-4-Diol-3,6 Acetylene, Yusupova Lola, Abdukarimova Saida, Rajabov Rustambek, Khalimova Oygul

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research work elaboration of technology of obtaine of acetylene diols and their vinyl ethers. Reaction of formation mono di vinyl ethers as a result vinyl 3,6-dimetyloktin-4-diol-3,6 by acetylene, and also influence of solvents, the catalyst and its quantity, duration of reaction, temperatures is investigated. Are defined speed of reaction. Recommended vinyl 3,6-dimetyloktin-4-diol-3,6 acetylene in the presence of highly basic systems at atmospheric pressure.

Synthesis And Research Of New Heterometal Complexes Cо(Ii), Ni(Ii), Cu(Ii) And Mn(Ii) Based On V(V) And 5-(4-Pyridyl)-1,3,4-Oxadiazole-2(3h)-Thione Lubricants, Pirimova Mehribon, Kadirova Shakhnoza, Rakhmonоva Dilnoza, Ziyayev Abduhakim

CHEMISTRY AND CHEMICAL ENGINEERING

The oxadiazole derivatives complex compounds with metals are biologically active substances. The aim of the study was to study the interaction of the chlorides of Co (II), Ni (II), Cu (II) and Mn (II) with 5-(4-pyridyl)-1,3,4-oxadiazole-2(3H)–thione, ammonium vanadate. Competitive coordination of donor centers, electronic and geometric structures of the ligand molecule were studied on the basis of the quantum-chemical software package Gaussian09 LanL2DZ. It was shown that 5-(4-pyridyl)-1,3,4-oxadiazole-2(3H)-thione ligand is partially coordinated through a localized nitrogen or sulfur atoms at formation of the complex. А procedure was developed for the synthesis of new mixed-metal complexes. The composition and structure of …

Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong

Journal of Electrochemistry

In recent years, research on lithium-sulfur (Li-S) batteries has received much attention because the sulfur positive electrode and the lithium metal negative electrode produce a high theoretical specific capacity (lithium metal ~ 3800 mAh·g^-1, sulfur ~ 1675 mAh·g^-1). In addition, sulfur is considered to be the most promising cathode material for secondary lithium batteries, due to its advantages of low price and environmental friendly. However, the practical application of conventional liquid Li-S batteries is still obstructed by several critical issues, such as lithium ploysulfides shuttle effect, long-term stability of lithium metal anode with organic liquid electrolytes, …