Catalysis and Reaction Engineering Commons^™

Electrodeposition Of Ruo2 Layers On Tio2 Nanotube Array Toward Co2 Electroreduction, Bei Jiang, Lina Zhang, Xianxian Qin, Wenbin Cai

Journal of Electrochemistry

RuO₂/TiO₂ composite materials have multitude of electrocatalytic applications including but not limited to CO₂ reduction reaction (CO₂RR). RuO₂/TiO₂ electrodes were previously prepared by repetitive coating and thermal decomposition (TD) of a Ru(III) precursor solution on Ti substrate. In this work, electrochemical potential cycling is applied to deposit amorphous RuO₂ (α-RuO₂) layers onto TiO₂ nanotube array (TNA) (RuO₂^CV/TNA) preformed on Ti foil. SEM, GIXRD, and voltammetry are applied to characterize the structures of the resulting RuO₂^CV/TNA. Ru loading on the RuO_{2 …}

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Investigation Of Copper Catalysts For Propylene Epoxidation, Hayden Fowler, Zheng Lu

Research Horizons Day Posters

No abstract provided.

Activity Of Pgm-Free Electrocatalysts For Oxygen Reduction Reaction: Ph And Co-Catalysis Effects, Mario Santiago Rojas Carbonell 8148369

Chemical and Biological Engineering ETDs

Fuel cells offer a source to the current and always increasing demand for electric power. But as any new technology, there are challenges that need to be addressed to render it feasible for the market place. One of this challenges is finding the appropriate materials to catalyze the oxygen reduction reaction (ORR) that occurs in the cathode. Oxygen is used as an oxidant in a significant portion of the fuel cells due to its readily availability and high reduction potential. Now, one the bottlenecks that stops the large-scale adoption is the expensive and rare metals that have been used as …

Synthesis, Characterization, And Properties Of Graphene-Based Hybrids With Cobalt Oxides For Electrochemical Energy Storage And Electrocatalytic Glucose Sensing, Sara C. Botero Carrizosa

Masters Theses & Specialist Projects

A library of graphene-based hybrid materials was synthesized as novel hybrid electrochemical electrodes for electrochemical energy conversion and storage devices and electrocatalytical sensing namely enzymeless glucose sensing. The materials used were supercapacitive graphene-family nanomaterials (multilayer graphene-MLG; graphene oxide-GO, chemically reduced GO-rGO and electrochemical reduced GOErGO) and pseudocapacitive nanostructured transition metal oxides including cobalt oxide polymorphs (CoO and Co3O4) and cobalt nanoparticles (CoNP). These were combined through physisorption, electrodeposition, and hydrothermal syntheses approaches. This project was carried out to enhance electrochemical performance and to develop electrocatalytic platforms by tailoring structural properties and desired interfaces. Particularly, electrodeposition and hydrothermal synthesis facilitate chemically-bridged …

A Study Of Iron-Nitrogen-Carbon Fuel Cell Catalysts: Chemistry – Nanostructure – Performance, Michael J. Workman

Nanoscience and Microsystems ETDs

Fuel cells have the potential to be a pollution-free, low-cost, and energy efficient alternative to the internal combustion engine for transportation and small-scale stationary power applications. The current state of fuel cell technology has already achieved two of these three lofty goals. The remaining barrier to wide-scale deployment is the high cost, which is primarily caused by dependence on large amounts of platinum to catalyze the energy conversion reactions. To overcome this barrier and facilitate the integration of fuel cells into mainstream applications, research into a new class of catalyst materials that do not require platinum is needed.

There has …

The Problem Of The Anode Electrolyte In H-Type Electrolytic Cell For Electrochemical Reduction Of Carbon Dioxide, Rui Zhang, Wei-Xin Lv, Li-Xu Lei

Journal of Electrochemistry

Electrochemical reduction of carbon dioxide (CO₂) was studied in the H-type electrolytic cell. It was found that the voltage between the cathode and the anode would increase during the long time electrolysis process, for this reason the electrolytic process would be unsustainable. After the experimental investigations carried out by constant potential electrolysis, constant current electrolysis, pH test and KHCO₃ concentration analysis of anode electrolyte before and after the electrolysis, the increase in cell voltage might be caused by the following process: H⁺, that was generated from the anodic oxygen evolution reaction, reacted with HCO_{3 …}

Application Of Composite Ionic Liquid In Electro-Oxidation Activation Of A C-H Bond, Zi-Ying Chen, Qian-Qian Wu, Jian-Qing Zhang, Ying-Hong Zhu, Chun-An Ma

Journal of Electrochemistry

In this paper, the ionic liquid/carbon nanotube composite material was prepared through modifying the ionic liquid 1-ethyl-3-methylimidazolium acetate to multi-walled carbon nanotubes. The electro-oxidation properties of p-methoxy toluene (p-MT) were studied using the composite as an electrolyte. The effects of scanning speed, temperature and substrate concentration were studied by cyclic voltammetry and chronoamperometry. The electrochemical kinetics of p-MT in this system was also studied. The results showed that the electrochemical oxidation of p-MT in the composite electrolyte solution was irreversible. The process was mainly controlled by diffusion, and the diffusion coefficient (D) was 7.69×10-10 cm²·s^-1. Increasing …

Electrochemical Synthesis Of Porous Polyaniline Electrodes Using Hkust-1 As A Template And Their Electrochemical Supercapacitor Property, Qiong Luan, Chun-Feng Xue, Hong-Ye Zhu, Fu-Juan Yang, Xu-Li Ma, Xiao-Gang Hao

Journal of Electrochemistry

Excellent electrode plays vital important role in the performance of supercapacitors. Polyaniline (PANI) with good conductivity is often used to prepare electrode. However, its available surface is limited and results in a poor supercapacitance in many cases. It is desirable to fabricate an electrode containing electroactive PANI with high surface area deriving from its porous structure. Here, the metal-organic framework (MOF) material with high surface area was selected as a hard template for synthesizing porous PANI. Microporous PANI composite electrodes (Micro-PANI/CC) were fabricated by depositing aniline on to carbon cloth (CC) pre-coated with MOF material of HKUST-1 using a unipolar …

Sn-Doped Α-Fe2O3 Photocatalyst Containing Oxygen Vacancy For Water-Splitting, Zu-Hua Wang, Dong-Fang Niu, Hui-Cheng Li, Rong-Bin Du, Heng Xu, Xin-Sheng Zhang

Journal of Electrochemistry

The α-Fe₂O₃ nanoparticles containing oxygen vacancies were synthesized in atmospheric N₂ by dip-dropping method without a high vacuum employed before annealing. The influences of annealing atmosphere and Sn-doping on the photocatalytic performance of α-Fe₂O₃ nanoparticles were studied by annealing the photocatalyst in N₂ or air and adding SnCl₄ to the precursor directly. The results showed that the current density of Sn-doping α-Fe₂O₃ annealed in N₂ at 550 °C and 1.23 V (vs. RHE) was 35 times greater than that of pristine α-Fe₂O₃ annealed in …

Direct Electrochemistry Of Glucose Oxidase Based On Ws2 Quantum Dots And Its Biosensing Application, Chen-Lu Li, Hua-Ping Peng, Zhong-Nan Huang, Yi-Lun Sheng, Pei-Wen Wu, Xin-Hua Lin

Journal of Electrochemistry

In this study, a novel electrochemical glucose biosensor has been developed by immobilizing glucose oxidase (GOx) on tungsten disulfide quantum dots (WS₂ QDs) on the surface of glassy carbon electrode (GCE). Transmission electron microscopy, UV-vis spectroscopy and cyclic voltammetry were employed to characterize the morphology, structure, and electrochemical behaviors of the as-prepared WS₂ QDs and the biofilm modified electrode. The results suggested that the WS₂ QDs could accelerate the electron transfer between the electrode and the immobilized enzyme, which enabled the direct electrochemistry of GOx without any electron mediator. Besides, the immobilized GOx in WS₂ QDsfilm …

Application Of Adamantane Schiff Base Nickel Complexes/Graphene Oxide/Glassy Carbon Modified Electrode In Detection Of Carmine, Peng Guo, Zheng Liu, Hai-Ying Li, Li-Ming Ma

Journal of Electrochemistry

The Schiff base nickel complexes/graphene oxide/glassy carbon electrodes were prepared by embedded method and electrodeposition on which were used to quantitatively detect the contents of carmine. Cyclic voltammetry, chronoamperometry, scanning electron microscopy (SEM) and other methods were employed to characterize properties and morphologies of the modified electrodes. The results show that the adamantane double Schiff base nickel complexes/graphene oxide/glassy carbon electrode had high electric catalytic activity toward carmine oxidation reaction, and might provide an easy and quick way to detect carmine content with good reproducibility.

Platinum Nanoparticles-Cobalt Oxide Nanostructures As Efficient Binary Catalyst For Ethylene Glycol Electro-Oxidation, Ghada El-Nowihy

Chemical Engineering

An enhanced electrocatalytic activity towards ethylene glycol oxidation reaction (EGO) in alkaline medium is observed at a glassy carbon (GC) electrode modified with a nanoparticle-based binary catalyst composed of Pt (nano-Pt) and cobalt oxide (nano-CoOx). The electrocatalytic activity of the modified electrodes towards EGO depends on the loading level as well as the composition of the catalyst layer atop the GC electrode surface. Several techniques including cyclic voltammetry (CV), field-emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDS) are used to address the catalytic activity of the proposed catalyst and to reveal their surface morphology and composition, respectively. …

Investigating A Sequentially Assembled Mnox/Pt Nanocatalyst As A Potential Anode For Ethylene Glycol Fuel Cells, Ghada El-Nowihy

Chemical Engineering

Aiming at a better electrocatalytic enhancement of ethylene glycol (EG) electrooxidation (EGO) in an alkaline medium for EG fuel cells (EGFCs), a MnOx/Pt anode was developed. A sequential layer-by-layer electrodeposition technique was employed to assemble first platinum nanoparticles (nano-Pt) directly onto the surface of a glassy carbon (GC) electrode then manganese oxide nanoparticles (nano-MnOx) were next immobilized. Field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDS) were employed to evaluate the surface morphology and the bulk composition of the proposed catalyst in addition to the relative ratio of the catalyst’s ingredients. On the other hand, the catalyst …

Estimation And Utilization Of Landfill Gas From Egyptian Municipal Wastes, A Case Study, Ali Habib, Ahmed A. Abdel-Rehim

Mechanical Engineering

Purpose

As the first Author had the chance to invest in landfill gas plant (EL Hammam plant) that flare approximately 1000 m3/hr. to generate electricity. Two critical question must be answered in order to proceed with the feasibility study. The three questions are:

1. 1- How many years this landfill gas emission will last?

2. 2- How much energy can be generated from one million ton if landfilled?

3. 3- How much CO2 in tons will be saved during the project life time?

Methods: Experimental method is used to determine BMP (Biochemical methane potential) ton CH4/ton waste. With

results we can know the …

Tunable Nanocomposite Membranes For Water Remediation And Separations, Sebastián Hernández Sierra

Theses and Dissertations--Chemical and Materials Engineering

Nano-structured material fabrication using functionalized membranes with polyelectrolytes is a promising research field for water pollution, catalytic and mining applications. These responsive polymers react to external stimuli like temperature, pH, radiation, ionic strength or chemical composition. Such nanomaterials provide novel hybrid properties and can also be self-supported in addition to the membranes.

Polyelectrolytes (as hydrogels) have pH responsiveness. The hydrogel moieties gain or lose protons based on the pH, displaying swelling properties. These responsive materials can be exploited to synthesize metal nanoparticles in situ using their functional groups, or to immobilize other polyelectrolytes and biomolecules. Due to their properties, these …

Fractionation And Characterization Of Lignin Streams From Genetically Engineered Switchgrass, Enshi Liu

Theses and Dissertations--Biosystems and Agricultural Engineering

Development of biomass feedstocks with desirable traits for cost-effective conversion is one of the main focus areas in biofuels research. As suggested by techno-economic analyses, the success of a lignocellulose-based biorefinery largely relies on the utilization of lignin to generate value-added products, i.e. fuels and chemicals. The fate of lignin and its structural/compositional changes during pretreatment have received increasing attention; however, the effect of genetic modification on the fractionation, depolymerization and catalytic upgrading of lignin from genetically engineered plants is not well understood. This study aims to fractionate and characterize the lignin streams from a wild-type and two genetically engineered …

Platinum-Rhodium Alloy Electrocatalyst Activities In The Methanol Oxidation Reaction, William R. Sandorf

Williams Honors College, Honors Research Projects

This study evaluates the electrochemical activity of several compositions of platinum-rhodium alloys on carbon support to identify potential replacements for the expensive platinum electrocatalysts currently used in direct methanol fuel cells (DMFCs). The electrochemical active surface areas (ECSAs) of each sample were determined using cyclic voltammetry (CV) in a 0.5 M H₂SO₄ solution to normalize CV currents generated in the methanol oxidation reaction (MOR). The activity of five compositions was tested; Pt₃Rh, Pt₂Rh, PtRh, Pt₂Rh, and Pt₃Rh. 100 mg of each catalyst was synthesized at 10% by weight platinum …

Improving Performance Of Au/Ts-1 Catalyst For Propylene Epoxidation, Jacob Kunisch, Zheng Lu

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

A New Thin Layered Structural Coating On A Metal Substrate For Enhanced Hydrogen Production From Steam Methane Reforming, Michael A. Lugo-Pimentel

Dissertations and Theses

In the past decade the use of hydrogen has become more ubiquitous. Its applications range from the upgrading of fossil fuels, to the production of ammonia, to the hydrogenation of fats, to the production of muriatic acid and methanol, all without including the efforts being taken to move towards a hydrogen economy. Its widespread use and its increasing demand lays pressure to find more efficient techniques of hydrogen production. Because the overwhelming majority of hydrogen produced nowadays comes from the steam reforming of natural gas (SMR), it appears that the most adept way to improve yields is by improving the …