Catalysis and Reaction Engineering Commons^™

Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman

Chemical Engineering

In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …

Tuning The Metal/Acid Functionalities In Hzsm-5 For Efficient Dehydroaromatization, Genwei Chen

Theses and Dissertations

The increasing production of natural gas liquids attracts both academia and industry to develop on-purpose techniques converting those light alkanes to value-added chemicals. Dehydroaromatization is an alternative path for light alkane conversion to produce aromatics but still lacks active and stable catalysts. This work aims at the development of efficient dehydroaromatization catalysts by tuning the metal/acid bifunctionality of the Pt/HZSM-5 catalyst. Additionally, through co-processing light alkane with ammonia during the dehydroaromatization process, this study also proposes a new reaction system that could directly link the C-N bond for nitrile synthesis.

The results suggested that the activity, selectivity, and stability of …

Activation Of The Renin–Angiotensin–Aldosterone System Is Attenuated In Hypertensive Compared With Normotensive Pregnancy, Robin C. Shoemaker, Marko Poglitsch, Hong Huang, Katherine Vignes, Aarthi Srinivasan, Cynthia Cockerham-Morris, Aric Schadler, John Anthony Bauer, John O'Brien

UK CARES Faculty Publications

Hypertension during pregnancy increases the risk of adverse maternal and fetal outcomes, but the mechanisms of pregnancy hypertension are not precisely understood. Elevated plasma renin activity and aldosterone concentrations play an important role in the normal physiologic adaptation to pregnancy. These effectors are reduced in patients with pregnancy hypertension, creating an opportunity to define the features of the renin–angiotensin–aldosterone system (RAAS) that are characteristic of this disorder. In the current study, we used a novel LC-MS/MS-based methodology to develop comprehensive profiles of RAAS peptides and effectors over gestation in a cohort of 74 pregnant women followed prospectively for the development …

Structures Of The Insecticidal Toxin Complex Subunit Xpta2 Highlight Roles For Flexible Domains, Cole L. Martin, David W. Chester, Christopher D. Radka, Lurong Pan, Zhengrong Yang, Rachel C. Hart, Elad M. Binshtein, Zhao Wang, Lisa Nagy, Lawrence J. Delucas, Stephen G. Aller

Markey Cancer Center Faculty Publications

The Toxin Complex (Tc) superfamily consists of toxin translocases that contribute to the targeting, delivery, and cytotoxicity of certain pathogenic Gram-negative bacteria. Membrane receptor targeting is driven by the A-subunit (TcA), which comprises IgG-like receptor binding domains (RBDs) at the surface. To better understand XptA2, an insect specific TcA secreted by the symbiont X. nematophilus from the intestine of entomopathogenic nematodes, we determined structures by X-ray crystallography and cryo-EM. Contrary to a previous report, XptA2 is pentameric. RBD-B exhibits an indentation from crystal packing that indicates loose association with the shell and a hotspot for possible receptor binding or a …

Recent Progress Of Bifunctional Electrocatalysts For Oxygen Electrodes In Unitized Regenerative Fuel Cells, Tian-Long Zheng, Ming-Yu Ou, Song Xu, Xin-Biao Mao, Shi-Yi Wang, Qing-Gang He

Journal of Electrochemistry

Unitized regenerative fuel cells (URFCs), which oxidize hydrogen to water to generate electrical power under thefuel cells (FCs) mode and electrolyze water to hydrogen under the water electrolysis (WE) mode for recycling, areknown as clean and sustainable energy conversion devices. In contrast to the hydrogen oxidation reaction (HOR) andhydrogen evolution reaction (HER) on the hydrogen electrode side, the sluggish kinetics of oxygen reduction reaction(ORR) and oxygen evolution reaction (OER) on the oxygen electrode side requires highly efficient bifunctional oxygencatalysts. Conventional precious metal oxygen catalysts combine Pt and IrO₂ with excellent ORR and OER activities toachieve bifunctional electrocatalysis performance, but …

Band Alignments Of Metal/Oxides-Water Interfaces Using Ab Initio Molecular Dynamics, Yong-Bin Zhuang, Jun Cheng

Journal of Electrochemistry

Band alignments of electrode-water interfaces are of crucial importance for understanding electrochemical interfaces. In the scenario of electrocatalysis, applied potentials are equivalent to the Fermi levels of metals in the electrochemical cells; in the scenario of photo(electro)catalysis, semiconducting oxides under illumination have chemical reactivities toward redox reactions if the redox potentials of the reactions straddle the conduction band minimums (CBMs) or valence band maximums (VBMs) of the oxides. Computational band alignments allow us to obtain the Fermi level of metals, as well as the CBM and VBM of semiconducting oxides with respect to reference electrodes. In this tutorial, we describe …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Computational Design Of Electro-Organocatalysts And Transition Metal Sulfides For The Electrochemical Reduction Of Co2, Foroogh Khezeli

LSU Doctoral Dissertations

Abstract

Electrochemical CO₂ reduction (ECO₂RR) has emerged as a promising approach for generating carbon-neutral liquid fuels by utilizing excess renewable electricity to convert CO₂. This thesis aims to employ atomistic simulations by using Density Functional Theory (DFT) to investigate the mechanistic details of how transition metal sulfides and electro-organocatalysts can enhance the activity and selectivity towards desired products, including those containing C-H bonds and molecules with C-C bonds. For this project, three different electrocatalysts were designed computationally.

Firstly, MoS₂ was chosen as a transition metal sulfide catalyst with the objective of understanding the kinetics …

Isolation And Performance Test Of Green Low Dosage Hydrate Inhibitors From Local Materials For Improving Flow Assurance In Oil And Gas Industry, Makungu Madirisha

Tanzania Journal of Engineering and Technology (TJET)

The formation of gas hydrates in oil and gas industry can be minimized or prevented by the use of inhibitors. This paper reports on hemicellulose and modified lignin as low dosage gas hydrate inhibitors (LDGHIs). LDGHIs were isolated from sugarcane bagasse (SCB), plant gum exudates (PGE) of Acacia trees, and coconut coir, and further characterized by Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) spectrometer, porosimeter and thermogravimetric analyzer (TGA). The PGE and SCB yielded 77.75% and 12.38% of hemicellulose, respectively, while coconut coir yielded 35.59% of lignin which was modified to sodium lignosulfonate (SLS) to improve its solubility in …

Assessment Of A Multi-Stage Wet Scrubber Performance Based On Characteristics Of Scrubbing Solution, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

This paper presents the wet scrubber performance on acid gas absorption based on pH and conductivity measurements. The waste combustion system comprised of a CFB combustor in which mainly plastics waste was loaded into the riser (15 cm ID x 1.5 m long). The scrubbing experiments were conducted using a two-stage wet scrubber used as air pollution control device. The performance of the wet scrubber system was assessed by studying the changes in the pH and conductivity. The scrubbing solution was prepared using lime. The optimum lime concentration was obtained from bench experiments, giving an initial pH of up to …

Cu/Bnx Catalysts For Electrocatalytic Reduction Of Nitrogen And Nitrate Waste, Siming Huo

Dissertations

Ammonia (NH₃) is one of the most important chemicals to the whole human society. The invention of the Haber-Bosch process enabled the industrial production of NH₃. However, owing to the high capital costs of the centralized plant and the equipment and the negative environmental impact, it is no longer suitable for today's needs of human development. As a result, there is an urgent need to investigate sustainable approaches for ammonia production. Among those reported studies, nitrogen reduction (NRR) and nitrate reduction reaction (NO₃RR) are considered applicable in the future. However, after decades of studying …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Investigation Of Light Management Strategies And Photochemistry Of Si/Tio2 Tandem Microwire Slurries For Solar Hydrogen Generation., Saumya Gulati

Electronic Theses and Dissertations

The intermittent nature of the Sun makes it difficult to use it as a primary source of electricity and often needs to be supplemented by electricity from the grid which comes from fossil fuels. This motivates the need for solar energy storage. Photoelectrochemical (PEC) water-splitting has been explored as a means to convert solar energy into hydrogen (and oxygen), which can be stored as fuel. The current method of coupling PV and electrolyzer units has been widely commercialized, however, the cost of H₂ generated is far from the target of $1/kg set by the DOE under the Energy EarthShot …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

A Molecular Dynamics Study Of Structural Modifications Of Perarylphosphonium Based Ionic Liquids On The Melting Point, Johnathan Anderson

Graduate Theses and Dissertations (2019 - present)

Several perarylphosphonium based mesothermal ionic liquids (ILs) have been shown to be stable at high temperatures for prolonged periods of time and with high heat capacities making them good candidates for use in many processes such as usage as a heat transfer fluid, as an absorbent for separation of aromatics from aliphatics, and as a solvent for high temperature reactions. Many, however, have melting points above 100^o C, limiting their use. Recently, it was shown that the melting point of an IL can be lowered by simply increasing the dipole moment of the cation or by structurally rigidifying the …

Hydrothermal Liquefaction Of Saccharina Latissima For The Production Of Biofuel, Mayokun A. Oke

Mechanical Engineering Theses

We performed hydrothermal liquefaction of brown macroalga (Saccharina latissima) in the presence of homogenous and heterogenous catalysts such as KOH, Na₂CO₃, Pd/C, HZSM-5, Ce/HZSM-5, and Ni/SiO₂-Al₂O₃ in hot compressed water, to investigate their effects on product yield and composition in the biocrude. To investigate hydrocarbon production, we used methanol as co-solvent (methanol-to-water 1/4 vol.%) and as the only liquefaction solvent. We carried out the experiments in a batch reactor at 330^oC and 120-130 bar, and varying temperature, algae-to-water ratio, residence time, and pretreatment method. The biocrude yields …

Improved Selectivity And Stability In Methane Dry Reforming By Atomic Layer Deposition Onto Ni-Ceo2-Zro2/Al2o3 Catalysts, Jonathan Lucas

LSU Master's Theses

The use of Ni in the dry reforming of methane (DRM) has been widely studied as a replacement for noble metal catalysts (Pt, Pd, Rh) due to Ni’s low cost compared to noble metals, its abundance, and the fact that its DRM activity is near that of noble metal catalysts. However, Ni has been shown to deactivate quickly under DRM conditions. Rare earth oxides such as CeO₂, or as CeO₂-ZrO₂ (CZO) are supports that improve both the activity and stability of Ni DRM systems due to their redox activity. However, this same activity is thought …

Bimetallic Compound Catalysts With Multiple Active Centers For Accelerated Polysulfide Conversion In Li-S Batteries, Wu-Xing Hua, Jing-Yi Xia, Zhong-Hao Hu, Huan Li, Wei Lv, Quan-Hong Yang

Journal of Electrochemistry

Practical applications of lithium-sulfur (Li-S) batteries are hindered mainly by the low sulfur utilization and severe capacity fading derived from the polysulfide shuttling. Catalysis is an effective remedy to those problems by promoting the conversion of polysulfides to reduce their accumulation in the electrolyte, which needs the catalyst to have efficient adsorption ability to soluble polysulfides and high activity for their conversion. In this work, we have proposed a bimetallic compound of NiCo₂S₄ anchored onto sulfur-doped graphene (NCS@SG) to fabricate a catalytic interlayer for Li-S batteries. Compared to CoS, the NiCo₂S₄ demonstrated much higher …