Biochemical and Biomolecular Engineering Commons^™

Microfracture And Surfactant Impact On Linear Cocurrent Brine Imbibition In Gas-Saturated Shale, Yongpeng Sun, Baojun Bai, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During and after hydraulic fracturing, fluid-shale interaction has a prominent impact on liquid retention and thus on gas phase permeability and gas productivity. By providing a low surface tension or wettability alteration, surfactants are widely used to decrease liquid retention after fracturing. To evaluate the liquid intake of a rock sample, an imbibition experiment is commonly used, especially when it is treated by a surfactant. However, conventional imbibition experiments with gas shale could not quantitate the imbibition behaviors as it does with conventional rocks because of the low porosity and extremely low permeability of gas shale. In this paper, a …

Fabrication And Characterization Of Poly(Octanediol Citrate)/Gallium-Containing Bioglass Microcomposite Scaffolds, Ehsan Zeimaran, Sara Pourshahrestani, Belinda Pingguan-Murphy, Nahrizul Adib Kadri, Hussin A. Rothan, Rohana Yusof, Mark R. Towler, Ivan Djordjevic

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone can be affected by osteosarcomae requiring surgical excision of the tumor as part of the treatment regime. Complete removal of cancerous cells is difficult and conventionally requires the removal of a margin of safety around the tumor to offer improved patient prognosis. This work considers a novel series of composite scaffolds based on poly (octanediol citrate) (POC) impregnated with gallium-based bioglass microparticles for possible incorporation into bone following tumor removal. The objective of this research was to fabricate and characterize these scaffolds and subsequently report on their mechanical and biological properties. The porous micro composite scaffolds with various concentrations …

A Glass Polyalkenoate Cement Carrier For Bone Morphogenetic Proteins, Adel M.F. Alhalawani, Omar Rodriguez, Declan J. Curran, Russell Co, Sean Kieran, Saad Arshad, Timothy J. Keenan, Anthony W. Wren, Gazelle Crasto, Sean A.F. Peel, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work considers a glass polyalkenoate cement (GPC)-based carrier for the effective delivery of bone morphogenetic proteins (BMPs) at an implantation site. A 0.12 CaO–0.04 SrO–0.36 ZnO–0.48 SiO₂ based glass and poly(acrylic acid) (PAA, Mw 213,000) were employed for the fabrication of the GPC. The media used for the water source in the GPC reaction was altered to produce a series of GPCs. The GPC liquid media was either 100 % distilled water with additions of albumin at 0, 2, 5 and 8 wt% of the glass content, 100 % formulation buffer (IFB), and 100 % BMP (150 µg …

Highly Porous Titania Films Coated On Sub-Micron Particles With Tunable Thickness By Molecular Layer Deposition In A Fluidized Bed Reactor, Rajankumar L. Patel, Ying Bing Jiang, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Titanium alkoxide (titanicone) thin films were coated on large quantities of sub-micron sized silica particles at 100 °C using molecular layer deposition (MLD) in a fluidized bed reactor. Titanium tetrachloride and ethylene glycol were used as precursors. The content of titanium on the particles increased linearly as the number of MLD coating cycles increased. The conformity of the films, with a thickness of ~12 nm, was verified using TEM for silica particles coated with 50 cycles of titanicone. The composition of the titan cone films was confirmed using energy dispersive X-ray spectrometry. Porous titanium oxide films were formed for the …

Identification And Quantification Of Gaseous Organic Compounds Emitted From Biomass Burning Using Two-Dimensional Gas Chromatography–Time-Of-Flight Mass Spectrometry, Lindsay E. Hatch, Wentai Luo, James F. Pankow, Robert J. Yokelson, Chelsea E. Stockwell, Kelley Barsanti

Civil and Environmental Engineering Faculty Publications and Presentations

The current understanding of secondary organic aerosol (SOA) formation within biomass burning (BB) plumes is limited by the incomplete identification and quantification of the non-methane organic compounds (NMOCs) emitted from such fires. Gaseous organic compounds were collected on sorbent cartridges during laboratory burns as part of the fourth Fire Lab at Missoula Experiment (FLAME- 4) and analyzed by two-dimensional gas chromatography– time-of-flight mass spectrometry (GC × GC–ToFMS). The sensitivity and resolving power of GC × GC–ToFMS allowed the acquisition of the most extensive data set of BB NMOCs to date, with measurements for 708 positively or tentatively identified compounds. Estimated …

Superheated Liquid And Supercritical Denatured Ethanol Extraction Of Antioxidants From Crimson Red Grape Stems, Johnathon Wenzel, Lihua Wang, Cheryl Samaniego, La'shyla Nelson, Korrine Ketchum, Michelle Ammerman, Ali Zand

Chemical Engineering Publications

Grapes are widely known for health benefits due to their antioxidant content. In wine production, grape stems are often discarded, though they has a higher content of antioxidants than the juice. The effectiveness of using an environmentally friendly solvent, ethanol, as a superheated liquid and supercritical fluid to extract antioxidant compounds from grape stems of organically grown Crimson Seedless grapes was evaluated. The Ferric Reducing Ability of Plasma (FRAP) assay and the Total Phenolic Content (TPC), or Folin-Ciocalteu assay, were used to quantify the antioxidant power of grape stem extracts. The extractions were performed at temperatures between 160°C and 300°C …

A Versatile Microparticle-Based Immunoaggregation Assay For Macromolecular Biomarker Detection And Quantification, Haiyan Wu, Yu Han, George G. Chase, Qiong Tang, Chen-Jung Lee, Bin Cao, Jiang Zhe, Gang Cheng

Mechanical Engineering Faculty Research

The rapid, sensitive and low-cost detection of macromolecular biomarkers is critical in clinical diagnostics, environmental monitoring, research, etc. Conventional assay methods usually require bulky, expensive and designated instruments and relative long assay time. For hospitals and laboratories that lack immediate access to analytical instruments, fast and low-cost assay methods for the detection of macromolecular biomarkers are urgently needed. In this work, we developed a versatile microparticle (MP)-based immunoaggregation method for the detection and quantification of macromolecular biomarkers. Antibodies (Abs) were firstly conjugated to MP through streptavidin-biotin interaction; the addition of macromolecular biomarkers caused the aggregation of Ab-MPs, which were subsequently …

Impact Of Internals Size And Configuration On Bubble Dynamics In Bubble Columns For Alternative Clean Fuels Production, Moses Kagumba, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bubble Columns Have Been Used in a Wide Range of Applications in Industry Including the Production of Alternative Clean Fuels Via Fischer-Tropsch Synthesis and Liquid Phase Methanol Synthesis, among Others. the Effects of Dense Internals Encountered in Fischer-Tropsch Synthesis with Different Diameters and Covering the Same Cross-Sectional Area and Hence Configuration on Bubble Properties Are Lacking in the Open Literature. Therefore, the Focus of This Study is to Investigate the Effects of Dense Internals with Different Diameters and Covering the Same Cross-Sectional Area and Hence Configuration on the Bubble Dynamics Such as Local and overall Gas Holdup, Specific Interfacial Area, …

Process For The Preparation Of Sufentanil Base And Related Components, Brian Orr, Joseph P. Haar Jr., George H. Klemm, Keith Tomazi

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present disclosure generally related to an improved process for the preparation of various piperidine derivatives. More particularly, the present disclosure related to an improved process for preparing sufentanil base (1) and related compounds, which advantageously utilizes more cost effective and/or less hazardous reagents, including a dispersion comprising between about 50% and about 70% by weight (based on the total weight of the dispersion) of an alkali metal hydride, such as sodium hydride, as well as eliminates the need for expensive and/or time consuming purification techniques.

Investigating The Solubility And Cytocompatibility Of Cao-Na2o-Sio2/Tio2 Bioactive Glasses, Anthony W. Wren, Aisling Coughlan, Courtney M. Smith, Sarah P. Hudson, Fathima R. Laffir, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study aims to investigate the solubility of a series of titanium (TiO₂)-containing bioactive glasses and their subsequent effect on cell viability. Five glasses were synthesized in the composition range SiO₂-Na₂O-CaO with 5 mol % of increments TiO₂ substituted for SiO₂. Glass solubility was investigated with respect to (1) exposed surface area, (2) particle size, (3) incubation time, and (4) compositional effects. Ion release profiles showed that sodium (Na⁺) presented high release rates after 1 day and were unchanged between 7 and 14 days. Calcium (Ca²⁺) release …

Biomimetic Oral Mucin From Polymer Micelle Networks, Sundar Prasanth Authimoolam

Theses and Dissertations--Chemical and Materials Engineering

Mucin networks are formed by the complexation of bottlebrush-like mucin glycoprotein with other small molecule glycoproteins. These glycoproteins create nanoscale strands that then arrange into a nanoporous mesh. These networks play an important role in ensuring surface hydration, lubricity and barrier protection. In order to understand the functional behavior in mucin networks, it is important to decouple their chemical and physical effects responsible for generating the fundamental property-function relationship. To achieve this goal, we propose to develop a synthetic biomimetic mucin using a layer-by-layer (LBL) deposition approach. In this work, a hierarchical 3-dimensional structures resembling natural mucin networks was generated …

Effects Of De-Polymerization Of Cellulose In Producing Sugar From Cellulosic Biomass At Low-Temperature, Lin Ling Wu

Online Theses and Dissertations

Lignocellulosic biomass is an abundant, renewable and environmentally friendly raw materials that can be converted into biofuels as an efficient alternative energy source. Sugar production is one of the key steps in converting biomass to fuels and chemicals. In order to enhance the accessibility of lignocellulosic biomass to catalytic enzyme, microorganism, and other types of catalysis during bioprocessing, the pre-treatment of lignocellulosic biomass is needed. To depolymerize the lignocellulosic materials, a 7% NaOH/12% urea solution was used. Selection of enzyme from Novozyme was performed, as a result, NS22074, a Cellulase complex was used throughout the research. Under the same reaction …

Deuterium Enrichment And The Kinetic Isotope Effect During Ruthenium Catalyzed Fischer-Tropsch Synthesis, Jennifer Naumovitz

Online Theses and Dissertations

Fischer Tropsch Synthesis is a highly researched field that is still widely debated today. Research in this field could lead to many different advances, such as alternative fuel sources, explanations of abiogenic hydrocarbons and the formation of organic matter in the solar nebula. Analysis of this synthesis was carried out with a ruthenium catalyst at controlled temperatures and pressures. Two types of experiments were performed: H2/D2 switching and competitive methods. The products showed that the hydrocarbon production rate was slightly increased when syngas was switched to D2/CO. Also, the H/D ratios of the hydrocarbons produced by the FT reaction using …

Effect Of Nitrogen On Properties Of Na2o-Cao-Sro-Zno-Sio2 Glasses, Ahmed Bachar, Cyrille Mercier, Arnaud Tricoteaux, Jean Christophe Hornez, Anne Leriche, Claudine Follet, Bertrand Revel, Stuart Hampshire, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glasses in the Na₂O-CaO-SrO-ZnO-SiO₂ system have previously been investigated for suitability as a reagent in Al-free glass polyalkenoate cements (GPCs). These materials have many properties that offer potential in orthopedics. However, their applicability has been limited, to date, because of their poor strength. This study was undertaken with the aim of increasing the mechanical properties of a series of these Zn-based GPC glasses by doping with nitrogen to give overall compositions of: 10Na₂O-10CaO-20SrO-20ZnO-(40-3x)SiO₂-xSi₃N₄ (x is the no. of moles of Si₃N₄). The density, glass-transition temperature, hardness, …

Inhalable Nanocomposites And Anticancer Agents For Cancer Therapy, Nathanael A. Stocke

Theses and Dissertations--Chemical and Materials Engineering

Cancer is designated as the leading cause of mortality worldwide and lung cancer is responsible for nearly 30% of all cancer related deaths. Over the last few decades mortality rates have only marginally increased and rates of recurrence remain high. These factors, among others, suggest the need for more innovative treatment modalities in lung cancer therapy. Targeted pulmonary delivery is well established for treating pulmonary diseases such as asthma and provides a promising platform for lung cancer therapy. Increasing local deposition of anticancer agents (ACAs) and reducing systemic exposure of these toxic moieties could lead to better therapeutic outcomes and …

Targeting G-Quadruplexes Within The Adam-15 Promoter: A Novel Therapeutic Approach For Breast Cancer, Rachel L. Jenkins

Honors Theses

ADAM-15 is a protein that is up-regulated in many diseases, particularly breast cancer; its over-expression is correlated with more aggressive and invasive phenotypes. The critical core promoter region of ADAM-15 is capable of forming a secondary DNA structure known as a G-quadruplex. The stabilization of this G-quadruplex has the potential to decrease the transcription of the over-expressed ADAM-15 protein. Six hundred forty compounds were screened for their ability to cause a shift in the melting temperature of an ADAM-15 oligonucleotide using FRET melt. Two compounds, NSC 146771 and NSC 260594, produced a significant shift in the melting temperature; further experimentation, …

Effect Of Resin Thickness, And Curing Time On The Micro-Hardness Of Bulk-Fill Resin Composites, Shaymaa M. Nagi, Lamiaa M. Moharam, Mohamed H. Zaazou

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: Bulk-fill resin composite has been introduced, their manufacturers claimed that they can be applied in bulks of 4mm, without necessitating a prolonged curing time, or a light curing unit with increased irradiance. Thus, this study was conducted to evaluate the effect of resin thickness and curing time on the micro-hardness of two bulk -fill resin composites: Tetric Evo-Ceram [TE], and X-trafil [XF]. Material and Methods: 120 cylindrical specimens were prepared and divided into 24 groups (n=5/group), representing the two bulk-fill resin composites, three different material thicknesses (2, 3 and 4 mm) and the four curing times used in the …

Predicting Key Residues Relevant To Hiapp Fibril Stability Using Permuted Residue Minimal Distance Pairs Of Riapp And Hiapp Dimers, Zak Kohler

Williams Honors College, Honors Research Projects

In order to discover the most significant residues involved in hIAPP fibril formation, Replica Exchange Molecular Dynamics (REMD) trajectories of both fibril forming hIAPP dimers and non-fibril-forming rIAPP dimers were analyzed. An import heuristic for this is the minimum distance between the peptides. To gain a greater resolution than the standard center of mass distance or 1-1, 2-2, etc.\ residue distances, every permutation of residue distance between molecules of the dimer was measured ranked. It was found that while the rIAPP had a single favored contact, (26 10), hIAPP appeared to have a network of at least three significant contacts: …

Formation Of Polymer Micro-Tubes, Daniel Peters

Williams Honors College, Honors Research Projects

Abstract

Current demand for organs is greater than the supply of donated organs, which means that a new method of obtaining replacement organs needs to be found. The objective of the research is to evaluate the use of thermo-triggered self-rolling polymer tubes that can be used for scaffolds in tissue engineering. Additionally, the research also includes a method for forming polymer tubes through the removal of a sugar fiber, coated with a thin film of polymer, by dissolving it in deionized water. For the first approach, the effect of the aqueous environment and temperature on a polymer bilayer was observed …

Determining The Critical Micelle Concentration Of Polymer Matrix For Drug Delivery Purposes, Katie Emmert

Williams Honors College, Honors Research Projects

Targeted oral release systems have been a large topic within drug delivery systems. There are several benefits to an oral delivery including patient convenience and lower chance of infection. The colon specifically has been researched as the release media. The colon is an ideal location for a release because the pH is stable with high levels of microorganisms. Like any type of drug delivery research, there are several hurdles to overcome. In order for a drug to be released in the colon, the drug must survive the stomach and be biocompatible. This biocompatibility and pH sensitivity was created using a …