Biomedical Engineering and Bioengineering Commons^™

Cryoprotectant Loading In A Microchannel, Shelby Pursley

Honors Capstones

No abstract provided.

Feedback Regulation Of Limb Position Characterized Using Fmri, Aaron J. Suminski, Robert A. Scheidt

Biomedical Engineering Faculty Research and Publications

No abstract provided.

Mechanical And Physical Properties Of Spider Silk Films Made From Organic And Water-Based Dopes, Chauncey Lewis Tucker

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silk has become a popular material due to its exceptional mechanical and biocompatibility properties. The project team has developed methods of producing and improving the properties of synthetic spider silk films. Other groups have been able to produce similar films having less than impressive mechanical properties using a toxic solvent. The spider silk team here at Utah State University has developed a new way of processing these films to more than triple their mechanical properties and has created a novel form of spider silk films produced from a water-based liquid, making it less expensive, more environmentally friendly, and more …

Faculty Internships For Capstone Design Instructors: Maintaining An Up-To-Date Capstone Design Course, Jay R. Goldberg

Biomedical Engineering Faculty Research and Publications

No abstract provided.

Effect Of Poultry Litter Biochar On Saccharomyces Cerevisiae Growth And Ethanol Production From Steam-Exploded Poplar And Corn Stover, Oumou Diallo

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The use of ethanol produced from lignocellulosic biomass for transportation fuel offers solutions in reducing environmental emission and the use of non-renewable fuels. However, lignocellulosic ethanol production is still hampered by economic and technical obstacles. For instance, the inhibitory effect of toxic compounds produced during biomass pretreatment was reported to inhibit the fermenting microorganisms, hence there was a decrease in ethanol yield and productivity. Thus, there is a need to improve the bioconversion of lignocellulosic biomass to ethanol in order to promote its commercialization. The research reported here investigated the use of poultry litter biochar to improve the ethanol production …

Metabolic Modeling Of Spider Silk Production In E. Coli, Sarah Allred

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silk has the potential to be a useful biomaterial due to its high tensile strength and elasticity. It is also biocompatible and biodegradable, making it useful for wound dressings and sutures, tissue and bone scaffolds, vessels for drug delivery, and ligament and tendon replacements. In some studies where spider silk has been used to grow cells, the silk has promoted more cell growth than the control. However, it is difficult to obtain the high volume of silk needed for these undertakings on a large scale. Spiders are territorial and cannibalistic, so they cannot be easily farmed. Therefore, spider silk …

Distribution Of Heavy Metals From Flue Gas In Algal Bioreactor, Katerine Napan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Algae are microscopic organisms with a great potential to produce biomass and lipids at productivities several times higher than terrestrial crops. To grow, these organisms consume carbon dioxide (CO₂), a greenhouse gas. This gas, emitted primarily by power plants after coal burning, can be effectively used for algae production, thus resulting in CO₂ remediation and biomass beneficial utilization as feedstuff, industrial filler and biodiesel feedstock. However, since coal is a fuel mined from the earth’s crust, it contains heavy metals that are released during coal burning and inevitably enter the algal cultivation system, contaminating the water were …

Excimer-Monomer Switching Molecular Beacon: The Study On Synthetic Cryptosporidium Dna Detection, Thermodynamics, And Magnesium Effects, Michael L. Davis

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study is to quantify and determine the binding of a molecular DNA probe or molecular beacon used in the detection of a known waterborne pathogen Cryptosporidium parvum. The objectives of this study are to determine the stability, sensitivity, and selectivity of the molecular beacon in detecting synthesized Cryptosporidium DNA sequences. The designed probe is based on a two-fluorophore system that is different than similar molecular beacons that utilize a fluorophore and quencher detection method. A comparative study between the two probes was also performed to demonstrate enhanced selectivity of the fluorophore based molecular beacon. Magnesium …

Nanodiamond Based Composite Structures For Biosensing Applications, Pedro Javier Villalba

USF Tampa Graduate Theses and Dissertations

This dissertation presents the synthesis and application of nanodiamond based materials for electrochemical biosensors. In this research work, nanodiamond particles have been used to prepare doped and undoped nanocrystalline diamond films, and conducting polymer composites for enhanced biosensing. The performance of the synthetized materials towards sensing applications was evaluated against glucose amperometric biosensing. Besides, cholesterol biosensing was attempted to prove the capabilities of the platform as a generic biosensing substrate.

Biosensors have been proved to provide reliable detection and quantification of biological compounds. The detection of biological markers plays a key factor in the diagnosis of many diseases and, even …

Robotic Resistance/Assistance Training Improves Locomotor Function In Individuals Poststroke: A Randomized Controlled Study, Ming Wu, Jill M. Landry, Janis Kim, Brian D. Schmit, Sheng-Che Yen, Jillian Macdonald

Biomedical Engineering Faculty Research and Publications

Objective

To determine whether providing a controlled resistance versus assistance to the paretic leg at the ankle during treadmill training will improve walking function in individuals poststroke.

Design

Repeated assessment of the same patients with parallel design and randomized controlled study between 2 groups.

Setting

Research units of rehabilitation hospitals.

Participants

Patients (N=30) with chronic stroke.

Intervention

Subjects were stratified based on self-selected walking speed and were randomly assigned to the resistance or assistance training group. For the resistance group, a controlled resistance load was applied to the paretic leg at the ankle to resist leg swing during treadmill walking. …

Synthesis And Characterization Of Clickable Dendrimer Hydrogels For Ocular Drug Delivery, Jingfei Tian

Theses and Dissertations

Topical medication is a standard treatment for glaucoma. However, frequent dosing makes the therapy inconvenient and patient unfriendly. There is a great need to develop new topical formulations that provide long lasting noninvasive drug release. In this thesis, novel clickable dendrimer hydrogels for anti-glaucoma drug delivery were synthesized and characterized. Polyamidoamine (PAMAM) dendrimers have been widely applied for drug delivery. The physical characteristics they possess include monodispersity, water solubility, encapsulation ability, and a large number of surface groups. Polycationic PAMAM dendrimer G3 was surface modified with alkyne-PEG5-acid and then reacted with polyethylene glycol bisazide (PEG-BA, 1100 gmol-1) through click chemistry …

Progress Of Mesenchymal Stem Cell Therapy For Neural And Retinal Diseases, Tsz Kin Ng, Veronica R. Fortino, Daniel Pelaez, Herman S. Cheung

Biology Faculty Articles

Complex circuitry and limited regenerative power make central nervous system (CNS) disorders the most challenging and difficult for functional repair. With elusive disease mechanisms, traditional surgical and medical interventions merely slow down the progression of the neurodegenerative diseases. However, the number of neurons still diminishes in many patients. Recently, stem cell therapy has been proposed as a viable option. Mesenchymal stem cells (MSCs), a widely-studied human adult stem cell population, have been discovered for more than 20 years. MSCs have been found all over the body and can be conveniently obtained from different accessible tissues: bone marrow, blood, and adipose …

Application Of Limited Mixing In The Hele–Shaw Geometry In Fabrication Of Janus Hydrogels, Md Mahmudur Rahman

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

It is widely accepted that cells behave differently responding to the stiffness of their extracellular matrix (ECM). Such observations were made by culturing cells on hydrogel substrates of tunable stiffness. However, it was recently proposed that cells may sense how strongly they are tethered to ECM, not the local stiffness of ECM. To investigate both hypotheses, we developed a method to fabricate Janus polyacrylamide (PAAM) gels. We squeeze two drops of different concentrations in the Hele-Shaw geometry to generate radial Stokes flow. When the drops coalesce, limited mixing occurs at the interface due to the narrow confinement, and diffusion normal …

Characterization Of Extraction Methods To Recover Phenolic-Rich Antioxidants From Blue Green Algae (Spirulina) Using Response Surface Approaches, Ahmad Salamatullah

Department of Food Science and Technology: Dissertations, Theses, and Student Research

Blue green algae (spirulina) is a dietary system that is widely consumed as a whole food or as a supplement in many Asian countries where populations are mostly unaffected by many of the diseases currently afflicting western societies, such as cancer, heart disease and arthiritis. Indeed, spirulina is a rich source of antioxidants with the phenolic compounds playing a significant role. As components of a complex dietary system, phenolic compounds can act alone or through synergistic mechanisms to impart a greater biologic effect than can be elicited by a sum of the individual parts. Therefore, an understanding of the antioxidative …

Connect With Bioengineering Researchers And Entrepreneurs, Clemson University

Bioengineering

2014 Program for Connect with Bioengineering Researchers and Entrepreneurs at Madren Conference Center.

Subtalar Fusion Fixture Design And Test, Nathan Ortiz

Honors Theses

Subtalar arthrodesis is performed when cartilage in the talo-calcaneal (the ankle) joint is degraded in a patient and there are multiple approaches to this surgery. Using synthetic bone material, fixtures were cast from aluminum, using the process of evaporation pattern casting, and epoxy. This casting was used to grip the calcaneus bone of the foot in order to load it mechanically, simulating different scenarios that would be encountered during walking. The relative displacement of the ankle joint was measured using a digital image correlation (DIC) program that was modified to work in both two- and three-dimensional space. This program can …

Mammary Epithelial Cells Cultured Onto Non-Woven Nanofiber Electrospun Silk-Based Biomaterials To Engineer Breast Tissue Models, Yas Maghdouri-White

Theses and Dissertations

Breast cancer is one of the most common types of cancer affecting women in the world today. To better understand breast cancer initiation and progression modeling biological tissue under physiological conditions is essential. Indeed, breast cancer involves complex interactions between mammary epithelial cells and the stroma, both extracellular matrix (ECM) and cells including adipocytes (fat tissue) and fibroblasts (connective tissue). Therefore, the engineering of in vitro three-dimensional (3D) systems of breast tissues allows a deeper understanding of the complex cell-cell and cell-ECM interactions involved during breast tissue development and cancer initiation and progression. Furthermore, such 3D systems may provide a …

Summer 2014 Biomedical Engineering Newsletter, Department Of Biomedical Engineering, Michigan Technological University

Department of Biomedical Engineering Newsletters

Table of Contents

• New IEEE, AIMBE and SPIE fellows
• Arteries on aisle 9
• Implants with sensors that shake off infection
• Mitch Kirby wins Whitaker International Fellowship
• Skin patch warns when it’s time to get out of the sun

Hand Prosthesis, Tru Nguyen, Aaron Delano, Kyle M. Green, Jorge Maderal, Cody Poland

Thinking Matters Symposium Archive

This project deals with engineering students’ prosthetic hand design, submitted to the University of Southern Maine’s engineering department. The primary goal of the prosthetic hand design is to allow an impaired individual to grasp and hold everyday objects ranging from a toothbrush to a jug of milk. The project consists of three teams each designing their respective portion of the prosthetic device. The teams will deal with three specific design areas; computer aided design of the mechanism, electronic integration, and manufacturing implementation. The design team turns notebook doodles into virtual models in SolidWorks. The electronics team will control a battery …

Department Of Biological Systems Engineering Newsletter, April 2014

BSE Department Magazine

No abstract provided.