Biomedical Engineering and Bioengineering Commons^™

Design And Validation Of A Novel Patterned Microfluidic Culture Platform For Hipsc-Cm Maturation, Anisia Gabriela Țiplea

Dartmouth College Master’s Theses

Adult cardiomyocytes (CMs) are among the most challenging cells to culture in vitro, given their poor adherence to plastic culture wells and poor maturation outside the native extracellular matrix (Narkar et al., 2022). Human induced pluripotent stem cell-derived CMs (hiPSC-CMs) offer a viable alternative to study heart development and disease progression. While not comparable to adult CMs in their maturity (Narkar et al., 2022), they mimic the clinical phenotypes of heart failure and are more feasible to culture. Nevertheless, hiPSC-CMs require specialized culture conditions that cannot be achieved with 2D static culturing, which fail to replicate native tissue environments (X. …

Flexible Cu Nanostructured Laser-Induced Graphene Electrodes For Highly Sensitive And Non-Invasive Lactate Detection In Saliva, Anju Joshi, Gymama Slaughter

Center for Bioelectronics Publications

A scalable and facile fabrication strategy is presented for developing a flexible, nanostructured, non-enzymatic electrochemical sensor for lactate detection based on copper-modified laser-induced graphene (CuNPs/LIG). A one-step electrodeposition process was employed to uniformly decorate the porous LIG framework with copper nanostructures, offering a cost-effective and reproducible approach for constructing enzyme-free sensing platforms. Scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed dense Cu nanostructure loading and efficient interfacial integration across the conductive LIG surface. The resulting CuNPs/LIG electrode exhibited excellent electrocatalytic performance, achieving a sensitivity of 8.56 μA µM⁻¹ cm⁻² with a low detection limit of 42.65 …

Recent Advances In Triboelectric Nanogenerators For Biomedical And Cardiovascular Monitoring, Amit Sarode, Jegan Rajendran, Gymama Slaughter

Center for Bioelectronics Publications

Triboelectric nanogenerators (TENGs) have emerged as versatile self-powered platforms for wearable and implantable biomedical sensing, offering an alternative to battery-dependent electronic devices. By converting biomechanical energy from physiological motion into electrical signals, TENGs enable simultaneous energy harvesting and active sensing within flexible, lightweight, and biocompatible architectures. This review summarizes recent advances from 2020 to 2025 in triboelectric nanogenerator (TENG)-based cardiovascular monitoring. The discussion focuses on material systems, device configurations, sensing mechanisms, and applications including pulse detection and cuffless blood pressure estimation. Representative studies are compared to highlight emerging trends in wearable and self-powered sensing technologies. However, differences in experimental conditions, …

Mxene-Enabled Wearable Biosensors: A Design Framework For Autonomous Biosensing, Jegan Rajendran, Gymama Slaughter

Center for Bioelectronics Publications

MXenes, a rapidly expanding family of two-dimensional transition metal carbides and nitrides, have emerged as leading materials for wearable bioelectronics due to their metallic conductivity, termination-rich surfaces, mechanical compliance, and tunable interlayer structures. However, wearable biosensor performance does not arise from conductivity alone, but from coupled interactions among surface termination chemistry, heterointerface engineering, hierarchical architecture, and device integration under dynamic physiological conditions. This review establishes a predictive structure-interface-device framework linking MXene chemistry to system-level performance across electrochemical, mechanical, gas, optical, and energy-storage modalities. We analyze how termination-controlled adsorption governs charge transfer and selectivity, how heterojunction formation modulates carrier density and …

Advances And Challenges In Digitally Connected Point-Of-Care Biosensing, Abdellatif Ait Lahcen, Jegan Rajendran, Gymama Slaughter

Center for Bioelectronics Publications

Point-of-care (POC) biosensors are undergoing a paradigm shift from isolated diagnostic tools to digitally connected, intelligent platforms that enable continuous and decentralized healthcare delivery. This review critically examines recent advances in wearable, implantable, and portable biosensors, highlighting how integration with wireless communication, the Internet of Medical Things (IoMT), and artificial intelligence is transforming their functionality and clinical utility. Particular attention is given to innovations such as smartphone-enabled interfaces, cloud-based analytics, and machine learning-assisted analysis, which collectively enhance sensitivity, specificity, and user accessibility across diverse healthcare settings, from personalized home monitoring and bedside diagnostics to deployment in resource-limited regions. The review …

Linker-Free Gold-Sputtered Tapered Optical Fiber Plasmonic Sensors For High-Sensitivity Refractive Index Detection In Microfluidic Platforms, Erem Ujah, Gymama Slaughter

Center for Bioelectronics Publications

Gold-sputtered tapered optical fiber (Au-TOF) sensors were developed for high-sensitivity refractive-index (RI) detection using aqueous glucose standards spanning 1.33–1.41 RIU (0–50% w/v). The sensors were fabricated using a reproducible workflow combining flame-brushing tapering, plasma surface preparation, and rotational magnetron sputtering, enabling azimuthally uniform gold coatings without the use of thiol or sulfur linker chemistries. Two sputtering durations (24 s and 30 s) were investigated to examine thickness-dependent plasmonic coupling and sensing performance. Optical measurements were conducted using a broadband supercontinuum source and compact spectrometer within a 20 µL microfluidic sensing chamber. Increasing glucose concentration produced a monotonic decrease in transmission …

Electrochemical Hemoglobin Biosensors For Point-Of-Care Diagnostics, Ashwini Dantanarayana, Gymama Slaughter

Center for Bioelectronics Publications

Hemoglobin (Hb) and its glycated variant (HbA1c) are essential clinical biomarkers for diagnosing anemia, acute hemorrhage, and long-term glycemic control. The growing demand for decentralized point-of-care (POC) testing has accelerated the development of rapid, inexpensive, and portable electrochemical sensing platforms. These technologies exploit the intrinsic redox activity of the heme prosthetic group, yet achieving efficient direct electron transfer (DET) remains a fundamental challenge because the electroactive iron center is deeply embedded within the globin structure. This review critically examines recent advances in electrochemical Hb sensing, tracing the evolution of electrode architectures from conventional carbon substrates to nanostructured materials, including graphene, …

Engineering Electrospun Pvdf Nanofibers For Next-Generation Wearable Bioelectronics, Reshmi Banerjee, Gymama Slaughter

Center for Bioelectronics Publications

Electrospun poly(vinylidene fluoride) (PVDF) and P(VDF-TrFE) nanofibers offer a mechanically flexible, high-surface-area platform for wearable bioelectronics, including piezoelectric sensing and self-powered operation. This review establishes a process–structure–property–performance framework for engineering electrospun PVDF- and P(VDF-TrFE)-based wearable systems. Relationships amongst precursor composition, electrospinning parameters, fiber morphology and alignment, crystalline phase formation, dipole orientation, and device-level piezoelectric performance are examined. Electrospinning is compared with other established fabrication methods including solution casting, spin coating, melt processing, phase inversion, and printing in terms of electroactive β-phase fraction, flexibility, scalability, manufacturing complexity, cost, and wearable-device suitability. Device architectures and performance are evaluated across pressure and strain …

Preventing G-J Tube Dislodgement - A Device And Communication Innovation, Sarah Clark

2026

Abstract

The Problem: G/J tube dislodgement is a frequent complication in pediatric patients.

Leads to:

• Emergency department visits
• Hospital admissions
• Delays in nutrition/medication

Impact on Patients & Families:

• IV placement (traumatic)
• Radiation exposure
• Overnight hospital stays

Impact on Nurses & System:

• Increased workload (admissions, coordination)
• Occupied inpatient beds for stable patients
• Inefficient care processes

Aims/Objectives Aim: Reduce unplanned G/J tube dislodgements and related hospital utilization.

Objectives: Develop a breakaway connector prototype

Implementation and Evaluation:
Setting: Pediatric inpatient & outpatient system
Participants: Nurses (bedside, GI, IR), caregiver, innovation team
Process: Roundtable discussions → identified workflow gaps Communication/workflow audit Developed …

A Scalable Paper-Based Electrochemical Sensor Employing Mwcnts For Isoniazid Detection, Sri Ramulu Torati, Gymama Slaughter

Center for Bioelectronics Publications

Isoniazid (INZ) is an antimicrobial agent that treats tuberculosis by inhibiting the InhA enzyme in Mycobacterium tuberculosis, making sensitive and reliable methods for routine monitoring essential to ensure safe and effective therapy. We report the development of a novel paper-based electrochemical sensor for the sensitive and selective detection of isoniazid. The sensor is constructed using a gold inkjet-printed electrode (GIPE) modified with gold nanoparticles (AuNPs), chitosan (CH), and multi-walled carbon nanotubes (MWCNTs), forming a GIPE/AuNPs/CH/MWCNTs sensor. Electrochemical deposition of AuNPs effectively addressed insulating gaps generated during the sintering of the gold ink, enhancing electrical conductivity and surface uniformity. The …

Preventing G/J Tube Dislodgement: A Device And Communication Innovation, Sarah Clark

2026

The Problem
G/J tube dislodgement is a frequent complication in pediatric patients
Leads to:

• Emergency department visits
• Hospital admissions
• Delays in nutrition/medication

Impact on Patients & Families:

• IV placement (traumatic)
• Radiation exposure
• Overnight hospital stays

Impact on Nurses & System:

• Increased workload (admissions, coordination)
• Occupied inpatient beds for stable patients
• Inefficient care processes

Aims/Objectives
Aim: Reduce unplanned G/J tube dislodgements and related hospital utilization.
Objectives: Develop a breakaway connector prototype

Implementation and Evaluation
Setting: Pediatric inpatient & outpatient system
Participants: Nurses (bedside, GI, IR), caregiver, innovation team
Process:
Roundtable discussions → identified workflow gaps
Communication/workflow audit
Developed device …

Circulating Biomarker Results From A Phase 2 Study Of Seralutinib In Pulmonary Arterial Hypertension, Robin Osterhout, Athénaïs Boucly, Raymond L. Benza, Richard N. Channick, Kelly M. Chin, Robert P. Frantz, Anna R. Hemnes, Luke S. Howard, Vallerie V. Mclaughlin, Olivier Sitbon, Jean-Luc Vachiéry, Rotham T. Zamanian, Richard Aranda, Matt Cravets, Zhaoqing Ding, Thao Duong-Verlé, David Mattola, Robert F. Roscigno, Ravikumar Sitapara, Lawrence S. Zisman, Jean-Marie Bruey, Hossein-Ardeschir Ghofrani

Department of Medicine Faculty Publications

[Introduction] To the Editor: Pulmonary arterial hypertension (PAH) is a progressive disease characterized by obstructive pulmonary arterial remodeling (1). Seralutinib, an investigational inhaled tyrosine kinase inhibitor, potently and selectively targets kinases relevant to PAH pathobiology including platelet-derived growth factor receptors (PDGFR) α and β, colony stimulating factor 1 receptor (CSF1R), and mast/stem cell growth factor receptor kit (c-KIT) (2). In preclinical models, seralutinib improved cardiopulmonary hemodynamics, reversed pulmonary vascular pathology and decreased right ventricular hypertrophy (3). In TORREY, a phase 2, multicenter, double-blind, randomized, placebo-controlled trial in PAH, seralutinib significantly reduced pulmonary vascular resistance (PVR) after 24 weeks with good …

Fill The Void - An Introductory Guide For Learning Medical Imaging, Reid Faith, Peter Gahan, Adam Trusty, Aleksandr Zyskin, Chukwuka Ukekwe, Denise Nchinda, Amanda K. Burbage, Alberto E. Musto

EVMS School of Health Professions Faculty Publications

No standardized, comprehensive approach for radiological image interpretation exists among medical schools in the United States of America. In order to rectify this, we outline a model aimed to help improve how medical imaging can be taught in medical schools. The VOID (Visualization, Orientation/Observation, Identification, Description) guide is a proposed universal, stepwise approach to medical image identification, interpretation, and communication. This structured guideline is aimed at building a foundation for students in early medical education. The VOID was applied to CT (Computed Tomography), MRI (Magnetic Resonance Imaging), and x-ray modalities as integrated sessions for medical students during human anatomy laboratory. …

Implementation And Clinical Utility Of Ultra-Low-Field Portable Magnetic Resonance Imaging For Postprocedural Neurological Evaluation In Ambulatory Neurosurgery: Illustrative Cases, Devan Patel, Vinay Jaikumar, Taysia P. T. Morioka, Laz Rifkin, Kenneth S. Jacoby, Jaims Lim, Anais Andrade, Aimee C. Degaetano, Pui Man Rosalind Lai, Elad I. Levy

EVMS School of Health Professions Faculty Publications

BACKGROUND

Elective endovascular neurosurgical procedures are increasingly performed in ambulatory neurosurgery centers, enabled by advances in catheter technology, safety of conscious sedation, and refined patient selection. Although complication rates are low, rapid evaluation of postprocedural neurological deficits remains critical. Conventional MRI is often impractical in outpatient or procedural settings, whereas ultra-low-field portable MRI (ULF-pMRI) systems (such as Swoop) allow bedside imaging with favorable diagnostic performance.

OBSERVATIONS

Two women in their 60s developed acute neurological deficits at an ambulatory neurosurgery center (ANSC) after diagnostic cerebral angiography in one case and elective internal carotid artery flow diversion in the other. In both …

Automation And Autonomy In The Ivf Laboratory: Concepts And Implications For Embryologists, Jacques Cohen, Gerardo Mendizabal-Ruiz, Giles Anthony Palmer, Giuseppe Silvestri, Mina Alikani

EVMS School of Health Professions Faculty Publications

Automation is regarded as the next phase in the evolution of laboratory IVF. Despite technological advances, most laboratory procedures remain operator-dependent, contributing to variability in performance and outcomes. While automation has improved reproducibility and efficiency in many areas of medicine, its adoption in IVF has been slow. This review examines how automation may be integrated into IVF laboratories through a set of conceptual distinctions. Automation refers to the execution of procedural steps by machine-controlled systems, whereas autonomy describes the degree to which such systems can operate without human intervention. This review distinguishes between static automation, which maintains or monitors the …

Injectable Borate/Borosilicate Bioactive Glass Systems For The Regeneration Of Hard Tissue – A Critical Review Of The Literature, S. Sina Mohammadi, Sunjeev S. Phull, Ryan J. Gilbert, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone defects caused by trauma, infection, or tumor resection remain difficult to treat because successful repair requires both structural restoration and control of the local pathological microenvironment. Osteolysis, defined as pathological bone resorption, is central to many of these conditions and is commonly driven by excessive osteoclast activity. Clinically translated injectable products such as NovaBone® Putty demonstrate the value of moldable bioactiveglass grafts for defect filling; however, conventional silicate bioactive glasses are permanent and provide limited therapeutic ion release. This limitation has motivated the development of injectable borate bioactive glass (B-BGs) and injectable borosilicate bioactive glass (BS-BG) systems as more …

Biomechanical Advancements In Hydroxyapatite, Magnesium-Substituted Hydroxyapatite, And Strontium-Substituted Hydroxyapatite In Clinical And Non-Clinical Studies For Maxillofacial Bone Tissue Engineering: A Review, Elham Zafarrazzaghnia, Stuart Hampshire, Aran Rafferty, Dermot Brabazon, Eamonn Debarra, Maura Kelleher

Articles

Hydroxyapatite (HA) is a bioceramic known for its bioactivity and osteoconductivity, which should make it an ideal candidate for maxillofacial bone regeneration. However, its brittleness limits its suitability for load-bearing applications. Over recent decades, substantial efforts have focused on enhancing its performance, particularly through ionic substitution, including magnesium-substituted HA (Mg-HA) and strontium-substituted HA (Sr-HA). This review summarises the available information on the structural, physical and mechanical properties of facial bones (maxilla, mandible, zygoma and frontal bone). The crystal structure, physical, and mechanical properties and in-vitro biological responses of dense and porous HA, Mg-HA and Sr-HA ceramics are described, with particular …

Generating Concentrated Ring Polymers Through Supercoiled And Open Circle Pdna Isoform Separation, Kelsey E. Hodsdon

Honors Theses and Capstones

DNA can serve as a model polymer due to its high uniformity compared to synthetic polymers. Plasmid DNA (pDNA) in particular offers a well-defined, low-dispersity model for studying topologically uniform systems of a cyclic nature. pDNA has unique isoforms known as open circle (OC) and supercoiled (SC). Using fast protein liquid chromatography (FPLC), specifically anion exchange chromatography (AEX), these OC and SC isoforms can be separated in order to access their unique material properties. Our lab was able to yield the pure SC isoform. However, OC isoform separation has been more challenging. Various difficulties arose during this process, including imaging …

Formulation Development Of Topical Inserts Containing Doxycycline And Doxycycline Combined With Tenofovir Alafenamide And Elvitegravir For The Prevention Of Sexually Transmitted Infections, Vivek Agrahari, M. Melissa Peet, Jasmin Monpara, Rijo John, Sriramakamal Jonnalagadda, Pardeep K. Gupta, Meredith R. Clark, Gustavo F. Doncel

CONRAD Publications

Despite advances in oral and injectable HIV prevention options and oral prophylaxis for sexually transmitted infections (STIs) of bacterial origin, there remains a critical need for effective on-demand topical (vaginal and rectal) products for pre- and post-exposure prophylaxis (PrEP and PEP). To fill this gap, we have developed single and first-in-kind multi-active topical inserts for bacterial STIs and HIV/STIs prevention. We have formulated two different inserts, one containing doxycycline (DOX) at 10, 50, and 100 mg doses for bacterial STI prevention, and a multipurpose prevention product (TED insert) that combines DOX (10 mg) with the antiretrovirals tenofovir alafenamide (TAF; 20 …

Development Of A 3d-Printed Hemodynamic Model To Characterize Doppler Signatures Of Obstructed Tapvr, Michael R. Turner, Maher R. Saadeh, Holly D. Bauser-Heaton, Vahid Serpooshan

Summer Research Program Abstracts

No abstract provided.