Biological Engineering Commons^™

Aconitic Acid, Glycerol And Cinnamic Acid Polyester Characterization For Bone Tissue Engineering, Katie Joanna Hogan

Honors Capstones

No abstract provided.

Use Of Lidar In The Design Of Grassed Waterways: Case Study In Agricultural Management In Oklahoma, Annette Sparks

Dissertations, Master's Theses and Master's Reports

Before the advent of Light Detection and Ranging (LiDAR) technology, farm-level infrastructure for sustainable agriculture was designed using topographic maps. LiDAR is a remote sensing method whereby reflected laser pulses are measured to generate high-resolution 3D images of the terrain. This report compares these two methods in the design of grassed waterways for flood drainage and evaluates how the quantitative difference between the two methods can affect the overall hydrologic design. The benefits of LiDAR are expected to be higher accuracy and precision in design, as well as greater reproducibility or consistency, regardless of the designer. To carry out this …

Automated Solid-Substrate Cultivation Of The Anaerobic Bacterium Clostridium Thermocellum, Mathew J. Ruwaya

Theses and Dissertations--Biosystems and Agricultural Engineering

The organism Clostridium thermocellum grows on cellulosic substrates and produces ethanol, acetate, lactate, formic acid, and CO₂. The organic acids produced alter the growth environment in which the bacteria grows and ultimately inhibit bacterial growth. One method which has been used successfully to maintain the system at acceptable growth conditions is to intermittently flush out the spent media and metabolic products and replace with new fermentation media. Our goal was to design and build an automated system that will automatically flush the spent media from the growing culture and resupply new media without manual intervention. An automated control …

The Role Of E-Cadherin Force In The Maintenance Of Homeostasis In Epithelial Acini, Fnu Vani Narayanan

Theses and Dissertations

Numerous three-dimensional model systems have emerged for emulating the biochemical and physiological states of native tissue. Yet little is known about the effects of mechanical forces on cell behavior in the context of an organized tissue structure in three-dimensional cell-culture. Epithelial cells cultured in a three-dimensional environment comprised of extracellular matrix proteins form spheroids of polarized cells. Cellular responses to mechanical cues, generated from dynamic interactions with the extracellular matrix and neighboring cells, are known to influence cellular behavior to a great extent. Previous studies have shown that tumorigenic progression has been frequently linked to the down regulation of E-cadherin, …

Microbubble Assisted Polyhydroxybutyrate Production In Escherichia Coli, Kadriye Innan, Fulya Ay Sal, Asif Rahman, Ryan J. Putman, Foster A. Agblevor, Charles D. Miller

Biological Engineering Faculty Publications

Background

One of the potential limitations of large scale aerobic Escherichia coli fermentation is the need for increased dissolved oxygen for culture growth and bioproduct generation. As culture density increases the poor solubility of oxygen in water becomes one of the limiting factors for cell growth and product formation. A potential solution is to use a microbubble dispersion (MBD) generating device to reduce the diameter and increase the surface area of sparged bubbles in the fermentor. In this study, a recombinantE. coli strain was used to produce polyhydroxybutyrate (PHB) under conventional and MBD aerobic fermentation conditions.

Results

In conventional …

Rational Design Of Rama-Labeled Nanoparticles For A Dual-Modaility, Light Scattering Immunoassay On A Polystyrene Substrate, Nathan D. Israelsen, Donald Wooley, Cynthia Hanson, Elizabeth Vargis

Biological Engineering Faculty Publications

Background: Surface-enhanced Raman scattering (SERS) is a powerful light scattering technique that can be used for sensitive immunoassay development and cell labeling. A major obstacle to using SERS is the complexity of fabricating SERS probes since they require nanoscale characterization and optical uniformity. The light scattering response of SERS probes may also be modulated by the substrate used for SERS analysis. A typical SERS substrate such as quartz can be expensive. Polystyrene is a cheaper substrate option but can decrease the SERS response due to interfering Raman emission peaks and high background fluorescence. The goal of this research is to …

Accessible Bioprinting: Adaptation Of A Low-Cost 3d-Printer For Precise Cell Placement And Stem Cell Differentiation, John A. Reid, Peter A. Mollica, Garett D. Johnson, Roy C. Ogle, Robert D. Bruno, Patrick C. Sachs

School of Medical Diagnostics & Translational Sciences Publications

The precision and repeatability offered by computer-aided design and computer-numerically controlled techniques in biofabrication processes is quickly becoming an industry standard. However, many hurdles still exist before these techniques can be used in research laboratories for cellular and molecular biology applications. Extrusion-based bioprinting systems have been characterized by high development costs, injector clogging, difficulty achieving small cell number deposits, decreased cell viability, and altered cell function post-printing. To circumvent the high-price barrier to entry of conventional bioprinters, we designed and 3D printed components for the adaptation of an inexpensive 'off-the-shelf' commercially available 3D printer. We also demonstrate via goal based …

Retargeting The Clostridium Botulinum C2 Toxin To The Neuronal Cytosol, Benjamin J. Pavlik, Elizabeth J. Hruska, Kevin E. Van Cott, Paul H. Blum

Department of Chemical and Biomolecular Engineering: Faculty Publications

Many biological toxins are known to attack specific cell types, delivering their enzymatic payloads to the cytosol. This process can be manipulated by molecular engineering of chimeric toxins. Using toxins with naturally unlinked components as a starting point is advantageous because it allows for the development of payloads separately from the binding/translocation components. Here the Clostridium botulinum C2 binding/translocation domain was retargeted to neural cell populations by deleting its non-specific binding domain and replacing it with a C. botulinum neurotoxin binding domain. This fusion protein was used to deliver fluorescently labeled payloads to Neuro-2a cells. Intracellular delivery was quantified by …

Inhibition Of Bacterial Growth And Prevention Of Bacterial Adhesion With Localized Nitric Oxide Delivery, Julia Osborne

Dissertations, Master's Theses and Master's Reports

Bacterial infections continue to be a problem at the site of an indwelling medical device, and over the years, various bacterial strains have become more resistant to current antibiotic treatments. Bacterial infection at an indwelling medical device can be dangerous and affect the performance of the medical device which can ultimately lead to the failure of the device due to bacterial resistance to treatment.

Nitric Oxide (NO) has been shown to possess antibacterial properties to prevent and inhibit bacterial growth. NO releasing coatings on indwelling medical devices could provide a reduction in bacterial infections that occur at the device site …

A Collagen Based Tissue Engineered Heart Valve Shows Excellent Functionality And Remodelling After Dynamic Conditioning, Claire Brougham, Ricardo Moreira, Tanya J. Levingstone, Stefan Jockenhoevel, Petra Mela, Fergal J. O'Brien

Conference Papers

No abstract provided.

Midfield Rf Signal Detector, Dawei Zhang

Electrical Engineering

This project is part of a Master’s thesis which looks at alternative ways to measure blood glucose. The Master’s thesis uses mid-field signals in order to match impedance and therefore lose less power as they travel through flesh. The goal of this senior project is to build a receiver for those signals and give accurate RSSI (received signal strength indicator) measurements. Mid-fields were originally explored by Stanford professor Dr. Ada Poon [3] who used the signaling technique to recharge the batteries of deeply implanted devices. Devices implanted near the surface of the skin were able to have their batteries recharged …

Compounds Released From Biomass Deconstruction: Understanding Their Effect On Cellulose Enzyme Hydrolysis And Their Biological Activity, Angele Djioleu

Graduate Theses and Dissertations

The effect of compounds produced during biomass pretreatment on cellulolytic enzyme was investigated. Liquid prehydrolyzates were prepared by pretreating switchgrass using 24 combinations of temperature, time, and sulfuric acid concentration based on a full factorial design. Temperature was varied from 140°C to 180°C; time ranged from 10 to 40 min; and the sulfuric acid concentrations were 0.5% or 1% (v/v). Identified products in the prehydrolyzates included xylose, glucose, hydroxymethylfurfural (HMF), furfural, acetic acid, formic acid, and phenolic compounds at concentration ranging from 0 to 21.4 g/L. Pretreatment conditions significantly affected the concentrations of compounds detected in prehydrolyzates. When assayed in …

Storage Of Round And Square Switchgrass Bales: Effect Of Storage Time And Fungal Inoculation On Saccharification Efficiency, Noaa Frederick

Graduate Theses and Dissertations

To produce fermentable sugars from lignocellulosic biomass feedstock, severe pretreatment conditions are needed (either high acid concentration, temperature, or retention times). High severities can produce toxic byproducts which inhibit enzymatic hydrolysis or fermentation. In order to reduce pretreatment severities (and thus increase enzyme and fermentation efficiency), the white-rot fungus Pleurotus ostreastus was seeded into square and round bales of Kanlow switchgrass (Panicum virgastum L.) and left in the field over a period of 9 month. The laccase producing fungus is believed to selectively degrade lignin, a common plant structural polymer, which can function as an enzymatic inhibitor. Samples were taken …

Department Of Biological Systems Engineering Newsletter, Fall 2015

BSE Department Magazine

No abstract provided.

Bioengineered Cell Niche For Skeletal Muscle Regeneration, Nicole M. Whittern, Naagarajan Narayanan, Chunhui Jiang, Owen Jones, Jay Gilbert, Michael Whittern, Shihuan Kuang, Meng Deng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Skeletal muscles can self-repair minor strains, lacerations, and contusions; however, in cases of volumetric muscle lossand muscle degenerative diseases, tissue fails to regenerate. Current cell-based therapies, such as myoblast transplantation, have significant drawbacks of low survival rates and engraftment efficacy, mainly due to the absence of supportive cell microenvironment. Scaffolds that mimic the natural cell microenvironment provide a robust platform to support cell adhesion, migration, proliferation, and differentiation. Electrospinning is a versatile technology platform used for fabricating the fiber scaffold that mimics the extracellular matrix. Thus, we aim to reconstitute the cell microenvironment through development of aligned fiber scaffolds by …

A Novel Synthetic Yeast For Enzymatic Biodigester Pretreatment, Tianyu Tan, Mark S. Aronson, Arren Liu, Jill H. Osterhus, Melissa Robins, Suraj Mohan, Erich Leazer, Bowman Clark, Alexa Petrucciani, Katherine Lowery, James Welch, Casey Martin, Helena Lysandrou, Michael E. Scharf, Jenna Rickus

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lignin, a complex organic polymer, is a major roadblock to the efficiency of biofuel conversion as it both physically blocks carbohydrate substrates and poisons biomass degrading enzymes, even if broken down to monomer units. A pretreatment process is often applied to separate the lignin from biomass prior to biofuel conversion. However, contemporary methods of pretreatment require large amounts of energy, which may be economically uncompelling or unfeasible. Taking inspiration from several genes that have been isolated from termites and fungi which translate to enzymes that degrade lignin, we want to establish a novel “enzymatic pretreatment” system where microbes secrete these …

Proteoglycan Mimic Of The Glycocalyx To Treat Endothelial Dysfunction, Victoria Messerschmidt, Alyssa Panitch, James R. Wodicka

The Summer Undergraduate Research Fellowship (SURF) Symposium

Patients with kidney failure usually undergo hemodialysis, a process by which toxins produced by the body are filtered from the blood, in order to survive. The preferred form for vascular access is called an arteriovenousfistula (AVF), a surgically created connection between an artery and vein that is utilized to undergo dialysis. However, AVFs have a failure rate of 50-60%. One of the contributions to AVF failure is endothelial cell dysfunction and loss of glycocalyx, which allows neutrophils and other native cells into the media of the vessel, which causes an inflammatory response. Our lab addresses endothelial dysfunction by mimicking the …

Development Of A Novel Enzymatic Pre-Treatment For Lignocellulosic Biomass, Melissa Robins, Jenna Rickus

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biofuels, fuels derived directly from living matter, present a renewable and environmentally friendly alternative to petroleum based fuels. Bioethanol produced from low input energy crops or agricultural waste is a promising fuel source because it does not interfere with the human food supply chain and the ethanol produced can be blended with gasoline. These potential sources of bioethanol are not yet commercially viable due to a polymer called lignin present in the plant’s cell wall which impedes the conversion of cellulose to glucose and the eventual fermentation of glucose to ethanol. Developing new methods for the pretreatment of lignocellulosic biomass …

Harnessing Notch Signaling For Biomaterial Scaffold-Based Bone Regeneration, Helena P. Lysandrou, Chunhui Jiang, Naagarajan Narayanan, Shihuan Kuang, Meng Deng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bone fracture has recently become prevalent, especially with an increasingly aging population. Current bone grafts procedures, including autografts and allografts, are hindered by multiple factors, such as limited supplies and inconsistent bone healing. Scaffold-based bone tissue engineering emerges as a prospective strategy to aid in bone regeneration through delivery of growth factors such as bone morphogenic proteins (BMPs). However, the use of BMPs suffers from several drawbacks such as protein instability and immunogenicity. Therefore, there exists a great need for the development of novel therapies to promote bone healing. Notch signaling, a pathway critical for cell-fate determination has been shown …

Characterization And Performance Of Algal Biofilms For Wastewater Treatment And Industrial Applications, Maureen Kesaano

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study was carried out on algal biofilms grown using rotating algal biofilm reactors (RABRs) with the aim of: i) characterizing their growth in terms of photosynthetic activity and morphology ii) evaluating their performance as a wastewater treatment option and a feedstock for biofuels production, and iii) examining the algal-bacteria interactions.

A review of algal biofilm technologies currently employed in wastewater treatment processes was made to compare nutrient removal efficiencies, factors that influenced algal biofilm growth, and the different bioproducts generated from algal biomass. Consequently, research efforts were directed towards addressing pertinent issues identified in literature in order to optimize …