Colossal Negative Magnetoresistance In Dilute Fluorinated Graphene,
2011
University of Nebraska–Lincoln
Colossal Negative Magnetoresistance In Dilute Fluorinated Graphene, X. Hong, S.-H. Cheng, C. Herding, J. Zhu
Xia Hong Publications
Adatoms offer an effective route to modify and engineer the properties of graphene. In this work, we create dilute fluorinated graphene using a clean, controlled, and reversible approach. At low carrier densities, the system is strongly localized and exhibits an unexpected, colossal negative magnetoresistance. The zero-field resistance is reduced by a factor of 40 at the highest field of 9 T and shows no sign of saturation. Unusual staircaselike field dependence is observed below 5 K. The magnetoresistance is highly anisotropic. These observations cannot be explained by existing theories, but likely require adatom-induced magnetism and/or a metal-insulator transition driven by …
Resonant Photoemission Of Rare Earth Doped Gan Thin Films,
2011
Air Force Institute of Technology
Resonant Photoemission Of Rare Earth Doped Gan Thin Films, S. R. Mchale, J. W. Mcclory, J. C. Petrosky, J. Wu, R. Palai, Yaroslav B. Losovyj, Peter A. Dowben
Peter Dowben Publications
The 4d → 4f Fano resonances for various rare earth doped GaN thin films (RE = Gd, Er, Yb) were investigated using synchrotron photoemission spectroscopy. The resonant photoemission Fano profiles show that the major Gd and Er rare earth 4f weight is at about 5–6 eV below the valence band maximum, similar to the 4f weights in the valence band of many other rare earth doped semiconductors. For Yb, there is very little resonant enhancement of the valence band of Yb doped GaN, consistent with a largely 4f14 occupancy.
Magnetism Of Cluster-Deposited Y–Co Nanoparticles,
2011
University of Nebraska-Lincoln
Magnetism Of Cluster-Deposited Y–Co Nanoparticles, Balamuruga Balamurugan, Ralph Skomski, Xingzhong Li, V. R. Shah, George C. Hadjipanayis, Jeffrey E. Shield, David J. Sellmyer
Nebraska Center for Materials and Nanoscience: Faculty Publications
Nanoparticles of YCo2, YCo3, and YCo5 are produced by cluster-deposition and investigated both structurally and magnetically. The nanoparticles have sizes of less than 10 nm and are superparamagnetic at 300 K, irrespective of stoichiometry. As-produced nanoparticles exhibit disordered structures with magnetic properties differing from those of the bulk particles. The temperature-dependent magnetization curves of the nanoparticles reveal blocking temperatures from 110 to 250 K, depending on stoichiometry. The magnetic anisotropy constant K1 of disordered YCo5 nanoparticles of 7.8 nm in size is 3.5×106ergs/cm3, higher than those of the disordered YCo …
Optical Cell For Combinatorial In Situ Raman Spectroscopic Measurements Of Hydrogen Storage Materials At High Pressures And Temperatures,
2011
University of South Carolina - Columbia
Optical Cell For Combinatorial In Situ Raman Spectroscopic Measurements Of Hydrogen Storage Materials At High Pressures And Temperatures, Jason R. Hattrick-Simpers, Wilbur S. Hurst, Sesha S. Srinivasan, James E. Maslar
Faculty Publications
An optical cell is described for high-throughput backscattering Raman spectroscopic measurements of hydrogen storagematerials at pressures up to 10 MPa and temperatures up to 823 K. High throughput is obtained by employing a 60 mm diameter × 9 mm thick sapphire window, with a corresponding 50 mm diameter unobstructed optical aperture. To reproducibly seal this relatively large window to the cell body at elevated temperatures and pressures, a gold o-ring is employed. The sample holder-to-window distance is adjustable, making this cell design compatible with optical measurement systems incorporating lenses of significantly different focal lengths, e.g., microscope objectives and single element …
Density Functional Theory Study On The Electronic Structure Of N- And P-Type Doped Srtio3 At Anodic Solid Oxide Fuel Cell Conditions,
2011
University of South Carolina - Columbia
Density Functional Theory Study On The Electronic Structure Of N- And P-Type Doped Srtio3 At Anodic Solid Oxide Fuel Cell Conditions, S. Suthirakun, Salai Cheettu Ammal, G. Xiao, Fanglin Chen, Hans-Conrad Zur Loye, Andreas Heyden
Faculty Publications
The electronic conductivity and thermodynamic stability of mixed n-type and p-type doped SrTiO3 have been investigated at anodic solid oxide fuel cell (SOFC) conditions using density functional theory (DFT) calculations. In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability and reducibility of various Nb- and Ga-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to study the effects of n- and p-doping on the electronic conductivity. In agreement with experimental observations, we find that the transformation from 20% Nb-doped Sr-deficient SrTiO3 to a non-Sr-deficient phase …
Design Of Superconducting Spoke Cavities For High-Velocity Applications,
2011
Old Dominion University
Design Of Superconducting Spoke Cavities For High-Velocity Applications, Jean R. Delayen, Subashini De Silva, C. S. Hopper
Physics Faculty Publications
Superconducting single- and multi-spoke cavities have been designed to-date for particle velocities from β0 ~ 0.15 to β0 ~ 0.65. Superconducting spoke cavities may also be of interest for higher-velocity, low-frequency applications, either for hadrons or electrons. We present the design of spoke cavities optimized for β0 = 0.8 and β0 = 1.
Crab Crossing Consideration For Meic,
2011
Old Dominion University
Crab Crossing Consideration For Meic, S. Ahmed, Y. Derbenev, Geoffrey A. Krafft, Y. Zhang, Subashini De Silva, Jean R. Delayen, A. Castilla
Physics Faculty Publications
Crab crossing of colliding electron and ion beams is essential for accommodating the high bunch repetition frequency in the conceptual design of MEIC – a high luminosity polarized electron-ion collider at Jefferson Lab. The scheme eliminates parasitic beam-beam interactions and avoids luminosity reduction by restoring head-on collisions at interaction points. In this paper, we report the possible crabbing schemes and requirements for both electron and proton beams.
Beam Dynamics Studies Of Parallel-Bar Deflecting Cavities,
2011
Old Dominion University
Beam Dynamics Studies Of Parallel-Bar Deflecting Cavities, S. Ahmed, G. A. Krafft, K. Deitrick, Subashini U. De Silva, Jean R. Delayen, M. Spata, M. Tiefenback, A. Hofler, K. Beard
Physics Faculty Publications
We have performed three-dimensional simulations of beam dynamics for parallel-bar transverse electromagnetic mode (TEM) type RF separators: normal- and superconducting. The compact size of these cavities as compared to conventional TM110 type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of eight 2-cell normal conducting cavities or a one- or two-cell superconducting structure are enough to produce the required vertical displacement at the Lambertson magnet. Both the normal and superconducting structures show very small emittance dilution due to the …
Fundamental And Hom Coupler Design Of The Superconducting Parallel-Bar Cavities,
2011
Old Dominion University
Fundamental And Hom Coupler Design Of The Superconducting Parallel-Bar Cavities, Subashini De Silva, Jean R. Delayen
Physics Faculty Publications
The superconducting parallel-bar cavity [1] is currently being considered as a deflecting system for the Jefferson Lab 12 GeV upgrade and as a crabbing cavity for a possible LHC luminosity upgrade. Currently the designs are optimized to achieve lower surface fields within the dimensional constraints for the above applications. A detailed analysis of the fundamental input power coupler design for the parallel-bar cavity is performed considering beam loading and the effects of microphonics. For higher beam loading the damping of the HOMs is vital to reduce beam instabilities generated due to the wake fields. An analysis of threshold impedances for …
Design Of Superconducting Parallel Bar Cavities For Deflecting/Crabbing Applications,
2011
Old Dominion University
Design Of Superconducting Parallel Bar Cavities For Deflecting/Crabbing Applications, Jean R. Delayen, Subashini De Silva
Physics Faculty Publications
The superconducting parallel-bar cavity is a deflecting/ crabbing cavity with attractive properties, compared to other conventional designs, that is currently being considered for a number of applications. The new parallel-bar design with curved loading elements and circular or elliptical outer conductors have improved properties compared to the designs with rectangular outer conductors. We present the designs proposed as the deflecting cavities for the Jefferson Lab 12 GeV upgrade and for Project-X and crabbing cavities for the proposed LHC luminosity upgrade and electron-ion collider at Jefferson Lab.
Crab Crossing Schemes And Studies For Electron Ion Collider,
2011
Old Dominion University
Crab Crossing Schemes And Studies For Electron Ion Collider, S. Ahmed, Y. Derbenev, V. Morozov, A. Castilla, Geoffrey A. Krafft, B. Yunn, Subashini U. De Silva, Jean R. Delayen
Physics Faculty Publications
This report shows our progress in crab crossing consideration for future electron-ion collider envisioned at JLab. In this design phase, we are evaluating two crabbing schemes viz., the deflecting and dispersive. The mathematical formulations and lattice design for these schemes are discussed in this paper. Numerical simulations involving particle tracking through a realistic deflecting RF cavity and optics illustrate the desired crab tilt of 25 mrad for 1.35 MV. Evolution of beam propagation are shown which provides the physical insight of the crabbing phenomenon.
Design Of Low-Frequency Superconducting Spoke Cavities For High-Velocity Applications,
2011
Old Dominion University
Design Of Low-Frequency Superconducting Spoke Cavities For High-Velocity Applications, Jean R. Delayen, C. S. Hopper, R. G. Olave
Physics Faculty Publications
Superconducting single- and multi-spoke cavities have been designed to-date for particle velocities from β~0.15 to β~0.65. Superconducting spoke cavities may also be of interest for higher-velocity, low-frequency applications, either for hadrons or electrons. We present the design of 325 and 352 MHz spoke cavities optimized for β=0.8 and β=1.
Design Of Superconducting Multi-Spoke Cavities For High Velocity Applications,
2011
Old Dominion University
Design Of Superconducting Multi-Spoke Cavities For High Velocity Applications, C. S. Hopper, Jean R. Delayen
Physics Faculty Publications
Superconducting spoke cavities have been designed and tested for particle velocities up to β0 ~ 0.6 and are currently being designed for velocities up to β0 = 1. We present the electromagnetic designs for two-spoke cavities operating at 325 MHz for β0 = 0.82 and β0 = 1.
Higher Order Mode Properties Of Superconducting Two-Spoke Cavities,
2011
Old Dominion University
Higher Order Mode Properties Of Superconducting Two-Spoke Cavities, C. S. Hopper, Jean R. Delayen, R. G. Olave
Physics Faculty Publications
Multi-Spoke cavities lack the cylindrical symmetry that many other cavity types have, which leads to a more complex Higher Order Mode (HOM) spectrum. In addition, spoke cavities offer a large velocity acceptance which means we must perform a detailed analysis of the particle velocity dependence for each mode's R/Q. We present here a study of the HOM properties of two-spoke cavities designed for high-velocity applications. Frequencies, R/Q and field profiles of HOMs have been calculated and are reported.
Conceptual Design Of A Polarized Medium Energy Electron-Ion Collider At Jlab,
2011
Old Dominion University
Conceptual Design Of A Polarized Medium Energy Electron-Ion Collider At Jlab, S. Ahmed, A. Bogacz, Ya. Derbenev, A. Hutton, Geoffrey Krafft, R. Li, V. Morozov, F. Pilat, R. Rimmer, Y. Roblin, T. Satogata, M. Spata, B. Terzić, M. Tiefenback, H. Wang, B. Yunn, Y. Zhang, P. Chetsov, Jean R. Delayen, Subashini Desilva, Hisham Sayed, V. Dudnikov, R. Johnson, F. Marhauser, M. Sullivan, S. Manikonda, P. N. Ostroumov, S. Abeyratne, B. Erdelyi, Y. Kim, A. Kondratenko
Physics Faculty Publications
A medium energy electron-ion collider is envisioned as the primary future of the JLab nuclear science program beyond the 12 GeV upgraded CEBAF. The present conceptual design selects a ring-ring collider option, covers a CM energy range up to 65 GeV for collisions of polarized electrons with polarized light ions or unpolarized light to heavy ions, and reaches a luminosity at above 1034 cm-2s-1 per detector over multiple interaction points. This paper presents a brief description of the current conceptual design of the accelerator.
Design Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities With Improved Properties,
2011
Old Dominion University
Design Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities With Improved Properties, Jean R. Delayen, Subashini De Silva
Physics Faculty Publications
The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. All designs to-date have been based on straight loading elements and rectangular outer conductors. We present new designs of parallel-bar cavities using curved loading elements and circular or elliptical outer conductors, with significantly improved properties such as reduced surface fields and wider higher-order mode separation.
Design Of Superconducting Parallel Bar Deflecting/Crabbing Cavities,
2011
Old Dominion University
Design Of Superconducting Parallel Bar Deflecting/Crabbing Cavities, Jean R. Delayen, Subashini De Silva
Physics Faculty Publications
The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. We present an analysis of several designs of parallel-bar cavities and their electromagnetic properties.
Multipacting Analysis Of The Superconducting Parallel-Bar Cavity,
2011
Old Dominion University
Multipacting Analysis Of The Superconducting Parallel-Bar Cavity, Subashini De Silva, Jean R. Delayen
Physics Faculty Publications
The superconducting parallel-bar cavity [1] is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. Multipacting can be a limiting factor to the performance of in any superconducting structure. In the parallel-bar cavity the main contribution to the deflection is due to the transverse deflecting voltage, between the parallel bars, making the design potentially prone to multipacting. This paper presents the results of analytical calculations and numerical simulations of multipacting in the parallel-bar cavity with resonant voltage, impact energies and corresponding particle trajectories.
Analysis Of Hom Properties Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities,
2011
Old Dominion University
Analysis Of Hom Properties Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities, Subashini De Silva, Jean R. Delayen
Physics Faculty Publications
The superconducting parallel-bar cavity is currently being considered for a number of deflecting and crabbing applications due to improved properties and compact design geometries. The 499 MHz deflecting cavity proposed for the Jefferson Lab 12 GeV upgrade and the 400 MHz crab cavity for the proposed LHC luminosity upgrade are two of the major applications. For high current applications the higher order modes must be damped to acceptable levels to eliminate any beam instabilities. The frequencies and R/Q of the HOMs and mode separation are evaluated and compared for different parallel-bar cavity designs.
Mechanical Study Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities,
2011
Old Dominion University
Mechanical Study Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities, Hyekyoung Park, Jean R. Delayen, Subashini De Silva
Physics Faculty Publications
The superconducting parallel-bar deflecting/crabbing cavities have improved properties compared to conventional cavity structures. It is currently being considered for number of applications. The mechanical design analysis is performed on two designs of the 499 MHz parallel-bar deflecting cavity for the Jefferson Lab 12 GeV upgrade. The main purpose of the mechanical study is to examine the structural stability of the cavities under the operating conditions in the accelerators. The study results will suggest the need for additional structural strengthening. Also the study results will help to develop a concept of the tuning method. If the cavity is to be installed …
