Polymer Chemistry Commons^™

Electrospun Nylon 6,6 Nanofibers Functionalized With Β-Cyclodextrin As Solid Phase Extraction Sorbent For Determination Of Parabens, Tassanee Kuakul

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this study, electrospun nanofibers of nylon 6,6 functionalized with β-cyclodextrin (nylon 6,6/β-CD) were fabricated and applied as a sorbent in solid-phase extraction (SPE) for determination of parabens in water. The electrospinning parameters such as polymer concentration, nylon 6,6/β-CD ratio, and electric field strength were investigated in order to obtain uniform nanofibers. The morphology and physical properties of obtained fibers were characterized by scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), and BET surface area analysis. The electrospun nylon 6,6/β-CD nanofibers were achieved with diameter in the range of 120 - 150 nm. The additional of β-CD slightly increased …

High Magnification Polymeric Lens For Smartphone Microscope, Wisansaya Jaikeandee

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this work, we present a facile method for fabrication of plano-convex lenses, using high reflective optical polymer (Polydimethylsiloxane, Sylgard 184 by Dow Corning, n ~1.42 and Norland Optical adhesive 61, NOA61 by Norland Products, ~1.56) under the confined sessile drop technique. The confined sessile drop technique is a facile method and an adjustable lens geometry through controlled the weight of liquid polymer on the lens substrate, as PMMA circular disk and Sylgard circular disk, with different diameter (2.5-6.0 mm). The liquid polymer was gradually spread and radially over the surface of the lens substrate, and resistance to spreading of …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Nanomorphology Dependent Optical And Mechanical Properties Of Aerogels, Chandana Mandal

Doctoral Dissertations

"Aerogels are very low density, light weight open pore materials. A hypothesis that is under intense current investigation by the scientific community states that the mechanical properties of nanostructured polymers depend on their nanomorphology. Aerogels are nanostructured ultra-lightweight nanoporous materials with skeletal frameworks that can display a wide range of nanomorphologies. Thereby aerogels comprise a suitable platform for testing not only that hypothesis but also a wide range of other properties such as light scattering for applications, for example, in thermally insulating windows.

To study the mechanical properties of nanostructured matter as a function of nanomorphology, various shape-memory polyurethane aerogels …

Synthesis And Applications Of Ceramic (Silicon Carbide And Silicon Nitride), Metallic (Cobalt(0)) And Polymeric (Polyurethane) Aerogels, Parwani M. Rewatkar

Doctoral Dissertations

"A new method has been demonstrated for the synthesis of monolithic ceramic and purely metallic aerogels from xerogel powder compacts, and the use of polyurethane aerogels based on cyclodextrins as efficient desiccants.

I. Highly porous ( > 80%) monolithic SiC and Si₃N₄, aerogels were prepared from compressed compacts of polyurea-crosslinked silica xerogel powders. The process is time efficient as solvent-exchange through powders is fast, and energy efficient as it bypasses drying with supercritical fluids. The final ceramic objects were chemically pure, sturdy, with compressive moduli at 37 ±7 MPa and 59 ± 7 MPa, and thermal conductivities …

Polyurea Aerogels: From Nanoscopic To Macroscopic Properties, Tahereh Taghvaee

Doctoral Dissertations

"The morphology of a material is intrinsically a qualitative property and in order to relate nanomorphology to synthetic conditions, it is necessary to express nano/micro-structure quantitatively. In this context, polyurea aerogels were chosen as a model system with demonstrated potential for rich nanomorphology and being guided by a statistical Design-of-Experiments model, a large array of materials (208) with identical chemical composition, but quite different nanostructures were prepared. By reflecting upon the SEM images, it was realized that our first pre-verbal impression about a nanostructure is related to its openness and texture; the former is quantified by porosity (Π), and the …

Ionic Liquid Based Polymer Gel Electrolytes For Use With Germanium Thin Film Anodes In Lithium Ion Batteries, Louise M. Mcgrath, John Jones, Edwin Carey, James F. Rohan

Articles

Thermally stable, flexible polymer gel electrolytes with high ionic conductivity are prepared by mixing the ionic liquid 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (C₄mpyrTFSI), LiTFSI and poly(vinylidene difluoride‐co‐hexafluoropropylene (PVDF‐HFP). FT‐IR and Raman spectroscopy show that an amorphous film is obtained for high (60 %) C₄mpyrTFSI contents. Thermogravimetric analysis (TGA) confirms that the polymer gels are stable below ∼300 °C in both nitrogen and air environments. Ionic conductivity of 1.9×10⁻³ S cm⁻² at room temperature is achieved for the 60 % ionic liquid loaded gel. Germanium (Ge) anodes maintain a coulombic efficiency above 95 % after 90 cycles in …

Properties And Applications Of Tetraalkylphosphonium Alkylsulfate Ionic Liquids And 3d Printed Polymerized Ionic Liquids, Mustafa Mohammed Alhussain

Murray State Theses and Dissertations

Ionic liquids (ILs) are defined as pure salts with a melting temperature below 100 °C with a subset called room-temperature ILs (RTILs) with melting temperatures at or below room temperature. The sizes of the cation and anion play a critical role in determining the properties, with smaller ions forming stronger ionic forces and packing better, raising viscosity and lowering conductivity of the IL. At the same time, intermolecular forces such as van der Waals and hydrogen bonding can play a role in IL properties as well. Our research described herein is focused on three tetraalkylphosphonium-based cations coupled with three alkylsulfate …

Stabilized, Hybrid Solid-State Photocatalysts For Water Purification: Preparation, Properties And Performance Under Visible Light Irradiation, Karpagavalli Ramji

Seton Hall University Dissertations and Theses (ETDs)

Stabilized heterogeneous photocatalysts that use only solar light and air have been prepared and successfully employed to decontaminate water from organic pollutants. Organic dye pollutants present, for example in textile effluents, are one of the major sources of water pollution owing to their limited biodegradability, toxicity and potential carcinogenic risks. Before certifying water for public consumption, reuse in industries or for discharge in surface water the organic pollutants must be degraded, an effort that is energy intensive and currently requires complex methodologies. We report solid-state photocatalysts that use only visible light and air to treat wastewater. Perfluoroalkyl perfluoro-substituted zinc phthalocyanine …

Combination Therapy: Parp Inhibitor Synergizes The Therapeutic Efficacy Of Doxorubicin In The Treatment Of Prostate Cancer, Momin Ansare

Electronic Theses & Dissertations

Men are most susceptible to prostate cancer in the United States. The general treatment options include surgery, hormone therapy, chemotherapy, and radiation therapy. But in recent days, the nanoformulation have shown promising applications in overcoming the drawbacks of the currently available treatment options. To complement, we tried to enhance the capability of the nanoparticle formulation by loading them with a novel drug combination for the treatment of prostate cancer. Herein, we synthesized folate conjugated iron oxide nanoparticles encapsulated with doxorubicin and olaparib for imaging and targeted treatment of prostate cancer. Both drugs are approved by FDA for clinical cancer treatment. …

Synthesis Of Doxorubicin-Based Prodrug And Activatable Mr Nanoprobe For The Imaging And Treatment Of Cancer, Bayan Dous

Electronic Theses & Dissertations

Magnetic Resonance Imaging (MRI) is increasingly being used as a diagnostic tool for cancer. We propose a novel molecular probe, Gadolinium-DTPA disulfide-bonded Doxorubicin (Gd-DTPA-SS-Doxo) encapsulated in iron oxide which could provide a dual modality for detecting malignant growth while simultaneously targeting treatment options. We first synthesized Gd-DTPA-SS-Doxo followed by encapsulation within the poly (acrylic acid) (PAA) coating of iron oxide nanoparticle (IONP), producing a nanoprobe (IO-Gd-DTPA-SS-Doxo) with quenched longitudinal spin lattice magnetic relaxation (T1). After receptor-mediated internalization, Gd-DTPA-SS-Doxo is released from the nanoprobe’s polymeric coating due to the acidic microenvironment of the tumor. When the molecular probe is subjected to …

Electropolymerization Of Polyaniline In The Presence Of Ferricyanide: Electrochemical, Spectroscopic And Gravimetric Studies, Lucas Marinelli

Master's Theses

In this work, ferricyanide-doped polyaniline (PANI) is electropolymerized by constant current and cyclic voltammetry (CV) measurements with simultaneous monitoring of mass changes using electrochemical quartz crystal microbalance (eQCM). Raman spectroscopy, Fourier transform infrared spectroscopy and CV measurements confirm the incorporation of the ferricyanide into the film and indicate modified electrical conductivity. UV-Vis absorbance spectroscopy and Raman spectroscopy confirm the conducting ‘emeraldine-salt’ state and confirm the presence of polarons, i.e. charge carriers.

The addition of ferricyanide during electropolymerization of the PANI film results in an increase of polymerization rate as confirmed using eQCM. A decrease in counter ion ingress/egress and an …

A New Generation Of Functional Polyisobutylenes For Advanced Applications, Corey M. Parada

Dissertations

Polyisobutylene (PIB) is a fully saturated, aliphatic polymer of high commercial importance due to its superior gas barrier properties and high chemical/oxidative stability. One commercial end-use for PIB is in insulated glass windows (IGU), where it acts as a gas/moisture barrier and sealant. Under certain adverse conditions, catastrophic failure of the PIB sealant may result in aesthetic and functional failure of the IGU, which necessitates replacement of the unit. Thus, there exists a need to improve current generations of thermoplastic PIB sealants to be able to withstand the harsh environments found in current real-world applications.

In the first project, we …

Polyhedral Oligomeric Silsesquioxane-Phosphate Glass Matrix Nanocomposites With Additional Chapter On Phosphate Glass-Poly(Ethylene Terephthalate) Matrix Composites, Kyoungtae Kim

Dissertations

Preparation and characterization of tin fluorophosphate glass (Pglass) matrix nanocomposites incorporating polyhedral oligomeric silsesquioxane (POSS) were investigated on the structural, thermal, morphological, mechanical, and rheological properties. Various processes including synthesis, extrusion and sintering processes were applied to prepare the nanocomposite samples. Another application of POSS with hydrophobic functional groups on the well-structured nanoscale silicate cage with three silanol groups was investigated to present the feasibility to use POSS molecule as a coating material on the surface of the hydrophilic inorganic glass. In addition, Poly(ethylene terephthalate) polymer matrix composites incorporating Pglass was studied to present the benefits of the Pglass with …

Effect Of Network Structure On Free Volume And Gas Transport Properties Of Thiol-Ene And Epoxy-Amine Networks, Ramesh Krishnan Ramakrishnan

Dissertations

Network parameters such as cross-link density or intermolecular interactions were used as effective parameters to control polymer chain packing or free volume and thereby control the mass transport properties of networks.

A series of polyethylene glycol (PEG) based thiol-ene elastomeric networks having a broad range of molecular weight between cross-links, M_c, (inverse of cross-link density) was prepared. The specific volume of the networks was studied as a function of temperature and pressure using high pressure dilatometry, and the obtained PVT data was fit using Simha-Somcynsky equation of state (S-S eos) analysis. Fractional free volume, quantified through S-S eos …

Structure-Property Relationships Of Solvent-Cast Organic Thin Films For Model Corrosion Control Coatings, Austin Maples

Dissertations

This dissertation aimed at answering several fundamental questions, specifically: 1) What is the effect of scribing parameters on visual corrosion assessments? 2) What role do molecular weight, residual solvent, and polymer composition have on morphological changes in organic thin films? 3) What alternatives to visual assessments could be implemented to better understand and detect corrosion before macroscopic failure? This research definitively proved that scribes can vary in type and dimensions, and yet are still comparable if the scribe dimensions before exposure are known. Furthermore, it demonstrated that solvents common to a variety of coating industries could become trapped within the …

Influence Of High Aspect Ratio Nanoparticle Filler Addition On Piezoelectric Nanocomposites, Jeremy A. Armas

Master's Theses

Piezoelectric nanogenerators (PNGs) are a new class of energy harvesting materials that show potential as a direct energy source for low powered electronics. Recently, piezoelectric polymers have been utilized for PNG technology due to low toxicity, high flexibility, and facile solution processing which provide manufacturing opportunities such as screen printing. Throughout the last decade, countless projects have focused on how to enhance the energy harvesting capabilities of these PNGs through the incorporation of nanoparticle fillers, which have been reported to enhance the piezoelectric properties of the film either directly through their intrinsic piezoelectric properties or through acting as surfaces for …

High-Throughput Assessment Of A Novel, Thiol-Acrylate Hydrogel For Tumor Spheroid Synthesis In A Microfluidic Device, Nathan Daniel Kersker

LSU Master's Theses

The extracellular environment plays an important role in regulating cell behavior. The mechanical, structural, and compositional properties of the extracellular matrix can determine the fate of the growing cells. Standard two-dimensional culturing in a flask fails to represent a native cellular environment. To create the native environment suitable for cells, hydrogels were previously studied. One of the most extensively studied synthetic hydrogels was a poly(ethylene glycol diacrylate) (PEGDA) hydrogel. However, the need for UV polymerization may introduce unwanted changes in cell morphology and viability. The hydrogel being proposed was a form of a thiol-acrylate hydrogel that can eliminate this problem …

Unexpected Effects Of Inorganic Phosphate Glass On Crystallization And Thermo-Rheological Behavior Of Polyethylene Terephthalate, Kyoungtae Kim, Shahab Kashani Rahimi, Todd M. Alam, Eric G. Sorte, Joshua U. Otaigbe

Faculty Publications

The effects of ultra-low glass transition temperature (T_g) phosphate glass (Pglass) on the thermal, morphological, rheological, mechanical, and crystallization properties of hybrid Pglass/poly(eththylene terephthalate)(PET) were investigated. Nano- and micro-scale distribution of the Pglass in the PET polymer matrix was observed. The polydispersed Pglass in the PET matrix functioned as a nucleation agent, resulting in increasing crystallization temperature. The Pglass in the PET matrix decreased the T_g, indicating a plasticizing effect of the Pglass in the hybrids that was confirmed by the significantly decreased complex viscosity of the PET matrix. In addition, with increasing temperature, a non-terminal …

Isolation Of Rna From A Mixture And Its Detection By Utilizing A Microgel-Based Optical Device, Molla R. Islam, Shakiba Azimi, Faranak Teimoory, Glen Loppnow, Michael J. Serpe

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

In this investigation, we show that RNA can be separated from a solution containing DNA and RNA and the isolated RNA can be detected using poly (N-isopropylacrylamide-co-N-(3-aminopropyl) methacrylamide hydrochloride) microgel-based optical devices (etalons). The isolation of RNA was accomplished by using hairpin-functionalized magnetic beads (MMPDNA) and differential melting, based on the fact that the DNA–RNA hybrid duplex is stronger (i.e., high melting temperature) than the DNA–DNA duplex (i.e., low melting temperature). By performing concurrent etalon sensing and fluorescent studies, we found that the MMPDNA combined with differential melting was capable of selectively separating RNA from DNA. This selective separation and …