Physical Chemistry Commons^™

Theoretical Study On Electrical Properties Of Molecular Junctions Of Viologen Derivatives, Zhuan-Yun Cai, Jia Liu, Si-Yuan Guan, De-Yin Wu, Zhong-Qun Tian

Journal of Electrochemistry

In this paper, the electrical properties of molecular junctions formed N,N′-bis(4-thioalkyl)-4,4′-bipyridinium (viologen) moiety between two gold (Au) electrodes have been investigated by combining density functional theory and non-equilibrium Green’s functional approach. To modulate the viologen molecule to be a cation with one and two positive charges (V⁺ and V²⁺), we introduce one and two trifluoroacetic acid ions (TFA^-) around the molecule, respectively. The valence states of V⁺ and V²⁺ are confirmed by checking Mulliken and NBO charges. Then the relationship between molecular conductance and electronic structures of the neutral state …

Preparation Of Pdcoir Tetrahedron Nanocatalysts And Its Performance Toward Ethanol Oxidation Reaction, Zhi-Yuan Yu, Rui Huang, Jie Liu, Guang Li, Qian-Tong Song, Shi-Gang Sun

Journal of Electrochemistry

As a new energy conversion device, direct ethanol fuel cells (DEFCs) are widely concerned because of their remarkable advantages such as high theoretical energy density and wide fuel sources. However, the rapid development of DEFCs has been severely impeded due to the sluggish kinetic process and toxic intermediates especially in their anodic reactions. Palladium (Pd)-based materials are considered to be excellent anode catalysts for DEFCs, especially under alkaline conditions. And further improving their performance is an important direction to promote the development of DEFCs. Surface structure and composition are the key factors affecting the performance of catalysts which can be …

Research Progress On Transition State Of Organic Electrode Materials, Xue-Qian Zhang, Zhou-Guang Lu, Wei-Wei Huang

Journal of Electrochemistry

With the increasing requirements for high energy density, long lifetime, high safety, environmentally friendly fabrication, and sustainable development of large energy storage devices, the society calls for new electrode materials in rechargeable batteries beyond traditional inorganic materials which are limited by specific capacity. Organic electrode materials have been widely used in rechargeable batteries due to their advantages of large theoretical capacity, designable structures and environmentally friendly fabrications. In this review, the radical intermediates of organic electrode materials produced in the charging-discharging process (redox reaction) and their types are systematically reviewed. The stability of radical intermediates controlled by changing the structure …

Preparation And Performance Investigation Of Li-Sgo Doped Semi-Ipns Porous Single Ion Conducting Polymer Electrolyte, Yun-Feng Zhang, Jia-Ming Dong, Chang Tan, Shi-Kang Huo, Jia-Ying Wang, Yang He, Ya-Ying Wang

Journal of Electrochemistry

Herein, the lithiated sulfonated graphene oxide (Li-SGO) was successfully prepared via three steps by sulfonation of graphene oxide with 3-merraptnpropylt rimethnxysilane, oxidation of thiol into sulfonate with hydrogen peroxide and lithiation of sulfonate with aqueous lithium hydroxide. The as-prepared Li-SGO was then introduced into the semi-interpenetrating networks of single ion conducting polymer electrolyte (Li-SGO-FPAS) and poly vinylidenefluoride-hexafluoro propylene (PVDF-HFP) binder by in-situ polymerization to fabricate the porous single ion conducting polymer electrolyte membrane (Li-SGO-po-FPAS) generated from the poor compatibility between aromatic Li-SGO-FPAS and aliphatic PVDF-HFP binder. The key properties such as morphology, porosity, solvent uptake, mechanical …

Combined Applications Of Photocurrent Spectroscopy, Photoluminescence Spectroscopy And Uv-Vis Spectroscopy For Nano-Semiconductor Based Photoelectric Devices, Si-Da Bian, Jian-Zhang Zhou, Zhong-Hua Lin

Journal of Electrochemistry

The electronic structures and properties of nano-semiconductors are quite different from those of bulk semiconductors due to the nano-size effect (such as quantum size effect). Moreover, when the nano-semiconductor materials are deposited onto the substrate to construct a device, their electronic properties are also affected by the substrate or other components, which may lead to different performances of nano-semiconductors based photoelectric devices, and consequently, different corresponding characterization methods are needed. The combination of photocurrent spectroscopy, photoluminescence spectroscopy with UV-Vis absorption spectroscopy can provide a more comprehensive characterization for the electronic properties and photoelectrochemical performances of nano-semiconductors in photoelectric devices. Our …

Influence Of Resveratrol On Performance Of Long-Term Storage’S Lithium-Ion Battery Electrolyte, Lei Zhang, Xu-Ping Zhang, Si-Wei Zhang, Quan-Chao Zhuang

Journal of Electrochemistry

Electrolyte of lithium-ion battery usually goes through processes of filling, transportation and storage from the completion of manufacture to the use. Understanding the influence of long-term storage process on performance of lithium-ion battery electrolyte is of theoretical significance for production of lithium-ion battery. Scanning electron microscope (SEM) images showed that the solid electrolyte interface (SEI) film formed on the surface of the graphite electrode was thicker in the base electrolyte after 6 months of storage. The charge/discharge test results showed that the reversible cycle capacity and cycle stability (capacity retention rate) of graphite electrode decreased significantly after 6 months of …

Research Progress In Electrodeposition Technology Of Titanium-Based Iridium Oxide Electrode, Dan-Dan Wu, Xu Wu

Journal of Electrochemistry

Titanium-based iridium oxide electrode has been widely used in various fields, such as electrocatalytic oxidation, biomedical applications, hydrometallurgical metal recovery, electro-osmotic dewatering, etc. At present, it is mainly prepared by traditional thermal decomposition method, however, which has high cost, cumbersome process, mainly relying on manual labor and cannot be mass-produced yet. It is, therefore, urgently necessary to explore new preparation technologies by focusing on electrodeposition technology, with technological characteristics such as eco-friendly and sustainable development. This article systematically discusses the research progress in iridium oxide electrodeposition preparation technology from the aspects of deposition solution formulation, base material selection and treatment, …

Preparations And Electrochemical Properties Of Bc/Coni2S4@Ppy Flexible Composites For Supercapacitors, Si-Yuan Peng, Shi-Run Yang, Jing-Hong Zhou, Zhi-Jun Sui, Tao Zhang, Yi Shi, Xing-Gui Zhou

Journal of Electrochemistry

Flexible supercapacitor is one of the most promising energy storage devices for portable and wearable electronic products due to its advantages of high power density, fast charging and long cycle life. Therefore, self-supporting flexible electrode materials with high performance have attained more and more attention both in academia and in industry recently. In this work, using bacterial cellulose (BC) as a flexible substrate, the bacterial cellulose/nickel-cobalt sulfide@polypyrrole (BC/CoNi₂S₄@PPy) flexible composites with three-dimensional porous network and good conductivity were prepared by a combined solvothermal-in-situ polymerization-vacuum filtration method. The samples were characterized by X-ray diffraction, …

Syntheses Of Na3V2(Po4)2O2F As A Cathode For Sodium Ion Battery Application, Kai Wu

Journal of Electrochemistry

High-temperature solid-state method, hydro-thermal method and solvo-thermal method have been mainly employed to synthesize Na₃V₂(PO₄)₂O₂F (NVPF) cathode materials. However, these methods are energy consuming and complicated, which is not applicable for a large scale industrial production. In this study, a rather low-temperature (70℃) co-precipitation strategy was proposed to synthesize NVPF cathode materials. The as-prepared NVPF cathode materials showed a spherical shape with a diameter of 400 ~ 500 nm, and exhibited a sodium storage of 105.6 mAh·g^-1 and an efficiency of 90.06%. After a simple thermal process, the specific …

Research Progress Of Sio2 Regrowth During Selective Etching Process In 3d Nand Manufacture Procedure, Zi-Han Zhou, Yun-Wen Wu, Ming Li, Su Wang

Journal of Electrochemistry

As one of the most significant memory chips in semiconductor market, NAND has been developed from two-dimension (2D) to three-dimension (3D). Due to the three-dimensional memory structure of 3D NAND, the capacity density, read-write speed and reliability of memory chips have been greatly improved, as well as the reduction of power dissipation. It is by nitride-oxide selective etching process in the alternate stacked structure of 3D NAND that the inter-dielectric layers can be obtained. The more stack layers, the better performance of chips will be. Meanwhile, however, silicon dioxide (SiO₂) would regrow on the corner of oxide layers, …

Study On Li3Bo3 Interface Modification Of Garnet Solid Electrolyte, Gui-Wei Chen, Zheng-Liang Gong

Journal of Electrochemistry

Garnet solid-state electrolytes have become the research hotspot due to their high ionic conductivity, wide electrochemical stability window and good air stability. However, there are still a series of problems to be solved. The poor contact between the lithium (Li) metal and garnet pellet make it difficult to build stable ion diffusion channels, resulting in large interfacial resistance. The continuous growth of lithium dendrites can penetrate the electrolyte pellet and cause a short circuit in the solid-state battery. Herein, a novel strategy is proposed to improve the wettability of LLZTO electrolyte with Li metal, via interfacial modification of LLZTO electrolyte …

Investigation Of The Structure And Dynamics Of Novel Battery Electrolytes By Utilizing Multidimensional Infrared Spectroscopic Techniques, Susith Rajitha Abeythunga Galle Kankanamge

LSU Doctoral Dissertations

Novel battery technologies are being developed due to the high global demand for energy in many fields where different specifications are required. The battery electrolyte provides a medium for ions to diffuse between electrodes and its composition determines the compatibility with the electrode pair. While many works focus on characterizing novel electrolyte systems to advance new batteries, the understanding of the microscopic structure and dynamics of speciations present in these electrolytes is limited. Many experiment methods have obtained incomplete time-averaged structure information due to lack of instrumental time resolution compared to the molecular intrinsic time sales of electrolytes that range …

Determination Of The Rydberg Constant From The Emission Spectra Of H And He+, Kyle D. Shaffer

Ramifications

Abstract

In this experiment, the Rydberg constants for the hydrogen atom and He⁺ were determined by analysis of the emission spectra of Hand He, respectively, in comparison to the principal quantum numbers of each transition. Using both a hydrogen and then a helium atomic lamp attached to a 0.5 m grating spectrometer and a photomultiplier detector (PMT), a change in voltage detected by the PMT can be paired with a corresponding wavelength passing through the spectrometer from each emission peak in the visible to ultraviolet range. The peaks acquired from this change in voltage were analyzed to find their …

Coexistence Of Metamagnetism And Slow Relaxation Of Magnetization In Ammonium Hexafluoridorhenate, James Louis-Jean, Samundeeswari M. Balasekaran, Keith V. Lawler, Adrián Sanchis-Perucho, José Martínez-Lillo, Dean Smith, Paul M. Forster, Ashkan Salamat, Frederic Poineau

Chemistry and Biochemistry Faculty Research

© The Royal Society of Chemistry 2021. The (NH4)2[ReF6] (1) salt was studied by X-ray diffraction, Raman spectroscopy, theoretical calculations, and magnetic measurements.1crystallizes in the trigonal space groupP3̄m1 (Re-F = 1.958(5) Å). In the Raman spectrum of1, splitting of the observed peaks was observed and correlated to the valence frequencies of vibration of the [ReF6]2−anion. The study of the magnetic properties of1, through DC and AC magnetic susceptibility measurements, reveals the coexistence of metamagnetism and slow relaxation of magnetization at low temperature, which is unusual in the molecular systems based on the paramagnetic 5d metal ions reported so far.

Computational Modelling Enables Robust Multidimensional Nanoscopy, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

The following sections are included:

• Present State of Computational Modelling in Fluorescence Nanoscopy

• Recent Contributions to Computational Modelling in Fluorescence Nanoscopy

• Outlook on Computational Modelling in Fluorescence Nanoscopy

• Acknowledgments

• References

Development And Validation Of A Dft-Based Force Field For A Hydrated Homoalanine Polypeptide, Ying Yuan, Zhonghua Ma, Feng Wang

Chemistry & Biochemistry Faculty Publications and Presentations

A new force field has been created for simulating hydrated alanine polypeptides using the adaptive force matching (AFM) method. Only density functional theory calculations using the Perdew–Burke–Ernzerhof exchange–correlation functional and the D3 dispersion correction were used to fit the force field. The new force field, AFM2020, predicts NMR scalar coupling constants for hydrated homopolymeric alanine in better agreements with experimental data than several other models including those fitted directly to such data. For Ala₇, the new force field shows about 15% helical conformations, 20% conformation in the β basin, and 65% polyproline II. The predicted helical population of …

Experimental And Computational Design Of Nanostructured Materials For High Performance Supercapacitor Devices, Basant A. Ali

Theses and Dissertations

Both energy conversion and storage technologies need to be developed hand-to-hand simultaneously to overcome the energy crises. To this end, supercapacitors (SCs) have the potential to be the energy storage platform due to their fast charging capability and long cycling stability. However, their low energy is the bottleneck towards their wide implementation compared to batteries. Also, current research is based on guess and check methods to modify electrode materials with limited properties prediction. In this thesis, density functional theory (DFT) has been employed as a tool to identify potential SC electrode materials. Then, the gained knowledge was used to develop …

Single-Beam Inscription Of Plasmon-Induced Surface Gratings, Denis Ab Therien, Nina M. Culum, Danielle M. Mcrae, Leila Mazaheri, Francois Lagugne-Labarthet

Chemistry Publications

The formation of gratings on gold nanoprisms arrays by plasmon-mediated reduction of a diazonium salt is investigated. Nanosphere lithography (NSL) is used to produce large surfaces of gold nanoprisms that are effective at reducing diazonium salts by producing hot electrons through excitation of localized surface plasmon resonances (LSPRs). Using single beam irradiation, we report here on the formation of periodic structures formed from the diazonium salts and that follow the NSL structures. On plasmonically active nanoprism substrates, the electric field enhancement promotes chemical reduction and hence modifies the grafting direction and grating properties of the ripples. The nanoprisms act as …

Epr Relaxation Of Modified Triphenylmethyl And Nitroxide Radicals, Whylder Moore

Electronic Theses and Dissertations

Trityl and nitroxide radicals are widely used as probes in chemical and biochemical systems. Understanding of factors that impact the electron spin relaxation for these radicals is important for selection of probes and experimental operating conditions. It has been previously reported that ¹³C isotope enrichment of the central carbon of the trityl yields a highly sensitive micro viscosity probe. It was important to characterize the impact of this substitution on the relaxation processes in fluid solution and immobilized samples.

Electron spin relaxation times for perdeuterated Finland trityl 99% enriched in ¹³C at the central carbon (¹³C …

Effects Of Resin Chemistries On The Selective Removal Of Industrially Relevant Metal Ions Using Wafer-Enhanced Electrodeionization, Humeyra B. Ulusoy Erol, Christa N. Hestekin, Jamie A. Hestekin

Chemical Engineering Faculty Publications and Presentations

Wafer-enhanced electrodeionization (WE-EDI) is an electrically driven separations technology that occurs under the influence of an applied electric field and heavily depends on ion exchange resin chemistry. Unlike filtration processes, WE-EDI can be used to selectively remove ions even from high concentration systems. Because every excess ion transported increases the operating costs, the selective separation offered by WE-EDI can provide a more energy-efficient and cost-effective process, especially for highly concentrated salt solutions. This work reports the performance comparison of four commonly used cation exchange resins (Amberlite IR120 Na⁺, Amberlite IRP 69, Dowex MAC 3 H⁺, and …