Electronic Structure Characterization Of Nanocrystalline Surfaces And Interfaces With Photoemission Spectroscopy,
2011
University of South Florida
Electronic Structure Characterization Of Nanocrystalline Surfaces And Interfaces With Photoemission Spectroscopy, Sebastian Gutmann
USF Tampa Graduate Theses and Dissertations
In this study, photoemission spectroscopy (PES) was used to investigate the electronic properties of nanocrystalline titanium dioxide (TiO2), zinc oxide (ZnO), and cadmium selenide (CdSe). Electrospray deposition technique enabled the preparation of thin films in vacuum from a dispersion prepared outside the vacuum chamber. This method also allowed the step-wise formation of interfaces and the monitoring of the evolution of the electronic structure with intermittent PES characterization.
The work function of nanocrystalline TiO2 and ZnO was measured with ultraviolet photoemission spectroscopy (UPS) and low-intensity x-ray photoemission spectroscopy (LIXPS). Measurements on environmentally contaminated surfaces revealed an instantaneous and …
Synthesis And Catalytic Activity Of Nanostructured Cerium Oxide,
2010
University of Nebraska-Lincoln
Synthesis And Catalytic Activity Of Nanostructured Cerium Oxide, Neil J. Lawrence
Department of Chemistry: Dissertations, Theses, and Student Research
Cerium oxide (ceria, CeO2-x where x is 0 to 0.5) has been one of the most widely used heterogeneous catalysts particularly in three way catalytic converters. Most of the catalytic traits can be attributed to two properties of ceria: first, the high mobility and storage capacity of oxygen within the lattice; second, the ease with which cerium changes between Ce3+ and Ce4+ states. These properties, combined with the abundance of cerium on earth, make ceria a low-cost highly effective alternative to noble metal catalysts. Recent research has been focused on the nanoscale properties of ceria.
The effect …
Characteristics And Stability Of Oxide Films On Plutonium Surfaces,
2010
University of Nebraska-Lincoln
Characteristics And Stability Of Oxide Films On Plutonium Surfaces, Harry Guillermo García Flores
Department of Chemistry: Dissertations, Theses, and Student Research
The oxidation of plutonium (Pu) metal continues to be an area of considerable activity. The reaction characteristics have significant implications for production use, storage, and disposition of this radiological material. Developing an accurate physical model of the structures, oxidation states, and oxygen concentration gradients present during oxidation are essential to understanding this process. Traditionally, the stable oxides of Pu have been thought to be plutonium sesquioxide (Pu2O3, O/Pu = 1.5, Pu3+) and plutonium dioxide (PuO2, O/Pu = 2.0, Pu4+), existing in a layered structure on Pu metal. Many of the …
Chemical And Electronic Structure Of Surfaces And Interfaces In Compound Semiconductors,
2010
University of Nevada, Las Vegas
Chemical And Electronic Structure Of Surfaces And Interfaces In Compound Semiconductors, Sujitra Pookpanratana
UNLV Theses, Dissertations, Professional Papers, and Capstones
The interface formation between two different materials is important in applications for optoelectronic devices. Often, the success or performance of these devices is dependent on the formation of these heterojunctions. In this work, the surface and interfaces in such materials for optoelectronic devices are investigated by a suite of X-ray analytical techniques including X-ray photoelectron (XPS), X-ray excited Auger electron (XAES), and X-ray emission (XES) spectroscopies to provide novel insight.
For the group III-nitrides (e.g., AlxGa1-xN) used in many light emitting devices, a significant challenge exists to form an Ohmic contact. The electron affinities and band gaps of GaN and …
Ab Initio Search For Novel Bxhy Building Blocks With Potential For Hydrogen Storage,
2010
Utah State University
Ab Initio Search For Novel Bxhy Building Blocks With Potential For Hydrogen Storage, Jared K. Olson
All Graduate Theses and Dissertations, Spring 1920 to Summer 2023
On-board hydrogen storage presents a challenging barrier to the use of hydrogen as an energy source because the performance of current storage materials falls short of platform requirements. Because boron is one of the lightest chemical elements that can form strong covalent bonds with hydrogen, it provides an excellent opportunity to design new lightweight materials on the basis of novel boron hydride building blocks. Realizing this potential requires an understanding of the electronic structure, chemical bonding, and stability of neutral and anionic BxHy clusters with variable stoichiometry. While a large number of boron hydride compounds are known, …
Electrochemical Detection For The Corrosion Of Reinforcing Steel In Concrete During Immersion And Drying Cycles,
2010
Department of Chemistry,Zhejiang University,Hangzhou 310027,China;
Electrochemical Detection For The Corrosion Of Reinforcing Steel In Concrete During Immersion And Drying Cycles, Bing-Li Jia, Fa-He Cao, An-Na Chen, Jian-Qing Zhang
Journal of Electrochemistry
The corrosion behavior of reinforcing steel in concrete under dry-wet cycle condition has been studied by electrochemical noise(EN) compared with the electrochemical impedance spectroscopy(EIS),SEM micrographs and EDS.The statistical method has been employed to analyze the EN data of reinforcing steel in concrete,which revealed three different corrosion stages of reinforcing steel in concrete,including the dissolution of the passive film,the active corrosion and the cumulation of corrosion product.The wavelet transform has also been employed,which indicated that steel in concrete with pH 1 is associated with uniform corrosion,while steel in concrete with pH 3 and pH 7 are associated with localized corrosion,such as …
Study On Preparing Technology And Corrosion Resistance Of Ti/Zr Based Chromium-Free Chemical Conversion Coating On Zinc Electroplating Layer,
2010
State Key Laboratory for Corrosion and Protection,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;
Study On Preparing Technology And Corrosion Resistance Of Ti/Zr Based Chromium-Free Chemical Conversion Coating On Zinc Electroplating Layer, Yong Guan, Jian-Guo Liu, Chuan-Wei Yan
Journal of Electrochemistry
In this paper,we obtained environmental-friendly chromium-free chemical conversion coating on the non-cyanide alkaline zinc electroplating layer by employing the optimized Ti/Zr based conversion technique.At the same time,the performances of the Ti/Zr based conversion coating were compared with chromate colour passivation coating.The corrosion resistances of the conversion coatings were investigated by using neutral salt spray(NSS) test,potentiodynamic polarization and electrochemical impedance spectroscopy(EIS).The results showed that the white rust appeared after 96 hours when the NSS test was performed on the Ti/Zr based conversion coating,which was close to the corrosion resistance rating of chromate colour passivation coating.Compared with the chromate passivation coating,the Ti/Zr …
The Sol-Gel Synthesis And Electrochemical Performance Of Li3V2(Po4)3/C Cathode Material For Lithium Ion Battery,
2010
Faculty of Material and Energy,Guangdong University of Technology,Guangzhou 518006,China;McNair Technology Co.Ltd,Dongguan 523800,Guangdong,China;
The Sol-Gel Synthesis And Electrochemical Performance Of Li3V2(Po4)3/C Cathode Material For Lithium Ion Battery, Li-Ying Liu, Lian Chen, Hai-Yan Zhang, Yu-Chun Zhai
Journal of Electrochemistry
Li3V2(PO4)3/C was synthesized by sol-gel method with citric acid as chelate and C sources. Physical and electrochemical performances of as-prepared materials were characterized through XRD, SEM and galvanostatic charge-discharge tests,etc. The results showed that products produced by calcining at 800 ℃ for 12 h had a single phase crystal structure and relatively small particle sizes with uniform distribution. At 0.1 C, 0.5 C and 1 C, the initial specific discharge capacities were 153.0, 143.1 and 130.6 mAh·g-1, respectively, and capacity efficiencies were 93.1%, 85.4% and 77.3% after 50 cycles, respectively. …
Eis Study On The Change Of Resistance And Water Absorption During The Failure Graduation Of Inorganic Zinc-Rich/Epoxy/Aliphatic Polyurethane Composite Coatings,
2010
Faculty of Materials Seience and Engineering , Beijing University of Chemical Technology, Beijing 100029,China
Eis Study On The Change Of Resistance And Water Absorption During The Failure Graduation Of Inorganic Zinc-Rich/Epoxy/Aliphatic Polyurethane Composite Coatings, Shao-Ping He, Jin-Ping Xiong, Yu-Ming Tang, Yu Zuo
Journal of Electrochemistry
The failure process of inorganic zinc-rich/micaceous iron oxide epoxy/aliphatic polyurethane composite coatings in 3.5% NaCl solution under ultraviolet radiation(UV) was studied with Electrochemical Impedance Spectroscopy(EIS).The result shows that the protective property of the coating was enhanced with the increase of total coating thickness,but the degree of improvement reduced gradully as the coating thickness increased.The shielding effect of the micaceous iron oxide epoxy was mainly reflected in the initial period of the service process,while in later period the coating performance largely depended on the zinc-rich primer.The change of the water uptake in the composite coating presented a 'three-stage' characteristic.The thinner the …
Study Of The 11-Ferrocenylalkanethiol Redox-Induced Structure Changes By Flow-Injection Electrochemical Surface Plasmon Resonance,
2010
School of Chemistry and Chemical Engineering,Central South University,Changsha 410083,Hunan,China;
Study Of The 11-Ferrocenylalkanethiol Redox-Induced Structure Changes By Flow-Injection Electrochemical Surface Plasmon Resonance, Xiu-Juan Xiao, Yong-Hui He, Juan Xiang, Bin Ren
Journal of Electrochemistry
Redox-induced orientation changes of self-assembled monolayers(SAMs) of 11-ferrocenylundecanethiol(FcC11SH) were studied by the flow-injection electrochemical surface plasmon resonance(FI-EC-SPR).Results indicated that there existed two mechanisms concerning the redox-induced structure change of the self-assembled monolayer of ferrocenylalkanethiols:the electrostatic repulsion between the positively charged surface and the ferricenium cation and that among the cations led to a decrease in the tilt angle of the alkanethiol chain;upon Fc oxidation,the Fc group rotated from a tilted conformation to a position where the cyclpentyldiene plane became perpendicular to the electrode.
Electroless Deposition And Characterization Of Nickel Coating In Lead-And Cadmium-Free Bath,
2010
State Key Laboratory of the Physical Chemistry of the Solid Surfaces,College of Chemistry and Chemical Engineering,Xiamen University,Xiamen 361005;
Electroless Deposition And Characterization Of Nickel Coating In Lead-And Cadmium-Free Bath, Fang-Zu Yang, Ming-Hui Chen, Xia-Jing Huang, Zhong-Qun Tian, Shao-Min Zhou
Journal of Electrochemistry
Technology of electroless nickel deposition in lead-and cadmium-free bath was developed.Coating′s morphology,composition,structure and electrochemical activity were characterized by SEM,EDS,XRD and electrochemical methods.The results showed that,the deposition rate of nickel in self-catalysing was 22.4 μm·h-1,which was increased by the increase of bath temperature and pH value.The effect of sodium hypophosphite on deposition rate was much more remarkable compared with nickel sulfate.The obtained nickel coating was 7.8% in phosphor weight content,having compact and neat surface morphology,amorphous structure,and good electrochemical corrosion resistance in sodium chloride solution.
Preparation And Characterization Of The Silane-Phosphonic Acid Composite Passivation Coating For Electrogalvanized Steel,
2010
State Key Laboratory for Corrosion and Protection,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;
Preparation And Characterization Of The Silane-Phosphonic Acid Composite Passivation Coating For Electrogalvanized Steel, Yong Guan, Jian-Guo Liu, Chuan-Wei Yan
Journal of Electrochemistry
A new silane-phosphonic acid composite passivation coating process has been developed for the protection of electrogalvanized steel based on N-(β-aminoethyl)-γ-aminopropyltrimethoxysilane(AAPTMS),γ-(2,3-epoxypropoxy)propyltrimethoxy-silane(GPTMS) and 1-hydroxy ethylidene-1,1-diphosphonic acid(HEDP).The results of X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FTIR),potentiodynamic polarization scan,electrochemical impedance spectroscopy(EIS) and neutral salt spray(NSS) tests indicated that the major structure of the prepared silane-phosphonic acid composite passivation coating consisted mainly of Si—O—Si and Si—O—P bonds.The area of white rust was not more than 5% of the total panal after 120 h NSS test,which could be compared favourably with the chromate colour passivation coating.However,the corrosion reaction on the anode of the silane-phosphonic acid composite passivation …
The Roles Of The Width Of Gas/Liquid/Solid Three-Phase Boundary Zone Of Dispersion Water Films In Atmospheric Corrosion Of Metals,
2010
College of Chemistry and Chemical Engineering,Ocean University of China,Qingdao 266100,Shandong,China;State Key Laboratory for Corrosion and Protection of Metals,Shenyang 110016,China;
The Roles Of The Width Of Gas/Liquid/Solid Three-Phase Boundary Zone Of Dispersion Water Films In Atmospheric Corrosion Of Metals, Jia Wang, Jing Jiang
Journal of Electrochemistry
The roles of TPB(Three-Phase Boundary) width in the corrosion processes of metals under dispersed water films were investigated by electrochemical techniques combined with contact angle measurement.It is found that both cathodic limiting current density and corrosion current density linearly increases with increasing the TPB width,confirming the important role of TPB width in gas/liquid/solid multiphase corrosion systems.Based on above results,the effect of water film thickness on atmospheric corrosion rate was quantitatively evaluated by the TPB width.
Comparative Studies On The Deterioration Process Of Organic Coatings Under Immersed And Cyclic Wet-Dry Conditions By Eis,
2010
College of Chemistry and Chemical Engineering,Ocean University of China,Qingdao 266100,Shandong,China;
Comparative Studies On The Deterioration Process Of Organic Coatings Under Immersed And Cyclic Wet-Dry Conditions By Eis, Yu-Nan Li, Jia Wang, Wei Zhang
Journal of Electrochemistry
Under the immersed and wet-dry cyclic conditions,the deterioration processes of the organic coatings on carbon steel surface have been comparatively studied by using electrochemical techniques.The wet-dry cycles were carried out in the alternating conditions of 12 h by immersing in a 3.5% sodium chloride solution and drying at 25 ℃ and 50% RH.Coating resistance,Rf,coating capacitance,Cf,and double layer capacitance,Cd,were monitored continuously and separately under above two conditions.The percentages of the intenfacial active area,Aw,were estimated from the obtained double layer capacitance,Cd.According to the EIS characteristics,the entire deterioration processes under above two mentioned conditions can be divided into three main stages,consisting of the …
Electrochemical Behaviors Of Organic Coating/Matal Substrate Under Simulated Deep Sea Environment Partⅰ.Effects Of Seawater Pressure On Transportation Behavior Of Water Through Coating And Coating′S Protective Performance,
2010
Naval Academy of Armament,Beijing 100161,China;
Electrochemical Behaviors Of Organic Coating/Matal Substrate Under Simulated Deep Sea Environment Partⅰ.Effects Of Seawater Pressure On Transportation Behavior Of Water Through Coating And Coating′S Protective Performance, Bin Liu, Zhi-Gang Fang, Tao Wang, Hong-Bin Wang
Journal of Electrochemistry
By means of electrochemical impedance spectroscopy(EIS),the electrochemical behaviors of organic coating/metal substrate were studied under simulated deep sea environment in the laboratory.Effects of seawater pressure on the transportation behavior of water through coating and the protective performance of coating were analyzed.The experimental results showed that,compared to normal pressured seawater,there were different impedance characteristics of coating in 3.5 MPa pressured seawater.The main observations were that high seawater pressure accelerated the process of water uptake and invalidation of coating,increased water absorption,and lowered the anti-corrosion property of coating.
Initial Stage Of Atmospheric Corrosion Of Ndfeb(M35) In A Simulated Marine Atmosphere,
2010
State Key Laboratory for Corrosion and Protection,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;
Initial Stage Of Atmospheric Corrosion Of Ndfeb(M35) In A Simulated Marine Atmosphere, Chun-Ling Li, Yuan-Tai Ma, Ying Li, Fu-Hui Wang
Journal of Electrochemistry
This study detailed the atmospheric corrosion behaviour of sintered NdFeB(M35) in a simulated marine atmosphere with 80% relative humidity(RH).The dissolution and subsequent reaction of NaCl particles cause the attack of NdFeB.The corrosion presented three representative types:if the electrolyte covered magnetic phase and Nd-rich phase,the Nd-rich phase was corroded firstly due to galvanic effect;if the electrolyte covered magnetic phase,magnetic phase was corroded along the grain boundary;if the electrolyte located near the position of defects,corrosion progressed along with the defect because of low concentration of oxygen inside the defect.With corrosion progressing,local corrosion areas were mutually connected,with Nd-rich phase and grain boundary being …
Photoelectrochemical Properties Of N, S, And Cl Modified Nano Tio2 Thin Films,
2010
Key Laboratory of Shanghai Colleges and Universities for Electric Power Corrosion Control and Applied Electrochemistry,Department of Energy Source and Environment Engineering,Shanghai University of Electric Power,Shanghai 200090,China;State Key Laboratory for Physical Chemistry of Solid Surface,College of Chemistry and Chemical Engineering,Xiamen University,Xiamen 361005,Fujian,China;
Photoelectrochemical Properties Of N, S, And Cl Modified Nano Tio2 Thin Films, Hong Yun, Chang-Jian Lin, Jing Li, Rong-Gui Du
Journal of Electrochemistry
The nitrogen(N),sulfur(S) and chlorine(Cl) modified nano TiO2 thin films were prepared by adding Ti(O-n-Bu)4 as the precursor into concentrated HNO3,H2SO4 and HCl Solutions,respectively,on different substrates in a sol-gel process.The photoelectrochemical performances of N,S and Cl modified nano TiO2 thin films have been studied by UV-vis(DRS),photocurrent curves,EIS and OCP-time curves.N-modified TiO2 nano films show better surface structure,which helps to improve the quantum efficiency of nano TiO2 thin films.
Hydrothermal Reduction Synthesis Of Lifepo4 And Its Electrochemical Performance,
2010
The State Key Laboratory of Optoelectronic Materials and Technologies,School of Physics and Engineering,Sun Yat-Sen University,Guangzhou 510275,China;
Hydrothermal Reduction Synthesis Of Lifepo4 And Its Electrochemical Performance, Hong-Li Zou, Guang-Hui Zhang, Pei-Kang Shen
Journal of Electrochemistry
The cathode materials of LiFePO4 were prepared via a hydrothermal reduction method using FeCl3 as Fe source and iron as a reducing agent.The results showed that ferric salt could be reduced to ferrous salt completely under the hydrothermal condition and pure-phase LiFePO4 was obtained based on the test results of XRD and FTIR.Carbon-coated LiFePO4 was synthesized by pyrolysisng glucose at high temperature.The morphologies of pure LiFePO4 displayed cluster-like while the LiFePO4/C displayed sphere-like particles.The electrochemical test showed that the LiFePO4/C had good rate performance,while LiFePO4 delivered much lower discharge capacity.
Effects Of Solvents And Electrolyte Salts On The Electrochemical Reduction Of Oxygen In Non-Aqueous Electrolytes,
2010
State Key Laboratory for Physical Chemistry of Solid Surfaces and Department of Chemistry,College of Chemistry and Chemical Engineering,Xiamen University,Xiamen 361005,Fujian,China;
Effects Of Solvents And Electrolyte Salts On The Electrochemical Reduction Of Oxygen In Non-Aqueous Electrolytes, Yan-Yan Tian, Wei Wu, Jun Gao, Yong Yang
Journal of Electrochemistry
The electrochemical reduction processes of oxygen in different non-aqueous solvents such as acetonitrile(MeCN),propylene carbonate(PC) and their mixtures were investigated by cyclic voltammetry method.The results indicated a one electron reduction of oxygen to O2-occured in these systems as a first step reduction,no matter whether in tetrabutylammonium hexafluorophosphate(TBAPF6)/MeCN or TBAPF6/PC electrolyte.However,the CV curves in 0.1 mol·L-1 TBAPF6/MeCN showed a couple of reversible redox peaks,indicating that the reduction process of oxygen was irreversible in the 0.1 mol·L-1 TBAPF6/PC electrolyte.In the PC-based electrolyte,the reduction current peak reduced largely and the oxidation peak …
Corrosion Electrochemical Behavior Of Am60 Magnesium Alloys In Automobile Engine Coolants,
2010
College of Chemistry and Chemical Engineering,Chongqing University,Chongqing 400044,China;
Corrosion Electrochemical Behavior Of Am60 Magnesium Alloys In Automobile Engine Coolants, Ling-Jie Li, Sha Wang, Yin Xiao, Jun Lan, Jing-Lei Lei, Sheng-Tao Zhang, Fu-Sheng Pan
Journal of Electrochemistry
The polarization measurements and electrochemical impedance spectroscopy(EIS) were used to study the corrosion electrochemical behavior of AM60 magnesium alloys in three kinds of commercial coolants for automobile engine.Results show that the tested commercial coolants are slightly corrosive to AM60 magnesium alloys and their corrosivity varies from coolant to coolant.The coolant C is the least corrosive among the studied commercial coolants and the coolant A is more corrosive than the coolant B and C.The coolant C appears to be the most promising coolant for automobile engine made by magnesium alloys.The coolant resistivity plays an important role in the corrosion of AM60 …
