Electrochemical And Surface Enhanced Raman Spectroscopic Studies Of Benzimidazole On Nickel Electrode,
2014
College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, Jiangsu, China;
Electrochemical And Surface Enhanced Raman Spectroscopic Studies Of Benzimidazole On Nickel Electrode, Ping-Jie Wei, Ya-Xian Yuan, Min-Min Xu, Jian-Lin Yao, Ren-Ao Gu
Journal of Electrochemistry
By measuring cyclic voltammograms and polarization curves, the inhibition effects of benzimidazole (BMIH) concentration in acetonitrile system on a nickel electrode were investigated. It was found that the oxidation and the corrosion potentials shifted positively, and the oxidation current decreased with the increase in the concentration of BIMH. Potential dependent adsorption and film formation behavior of BMIH on the nickel electrode were investigated by in situ SERS spectroscopy. With the potential moving from negative direction to positive direction, the complexes made of BIMH and nickel were formed, preventing the nickel electrode from corrosion. In addition, the 0.001 mol·L-1 of …
Synthesis Of Silver Nanoparticles Supported On Graphene Quantum Dots For Oxygen Reduction Reaction,
2014
State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China;
Synthesis Of Silver Nanoparticles Supported On Graphene Quantum Dots For Oxygen Reduction Reaction, Jian Ju, Wei Chen
Journal of Electrochemistry
Silver-based catalysts have been extensively investigated as the platinum substituted catalysts due to their high catalytic efficiency, low cost and long-term durability. In this study, the surfactant-free silver nanoparticles supported on graphene quantum dots were synthesized through a facile approach without addition of any other protecting ligands and reducing agents. The “surface-clean” silver nanoparticles had remarkable electrocatalytic performance towards oxygen reduction reaction (ORR) with the most efficient four-electron transfer process. Compared with commercial Pt/C catalyst, the hybrid nanoparticles showed comparable catalytic performance for ORR but much higher tolerance to methanol. Such silver nanoparticles supported on graphene quantum dots may have …
Electrochemical Fabrication Of Two-Dimensional Flower-Like Pt Nanostructures For Methanol Electrocatalytic Oxidation,
2014
College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, China;
Electrochemical Fabrication Of Two-Dimensional Flower-Like Pt Nanostructures For Methanol Electrocatalytic Oxidation, Xia Wang, Jun Hu, Yong-Jun Li
Journal of Electrochemistry
Two-dimensional flower-like Pt nanostructures (2D FPNs) were fabricated on glassy carbon substrates by galvanostatical electrochemical technique. The electrolyte was the HAuCl4 + HClO4 aqueous solution without addition of any structure-directing organic reagent, which made as-prepared Pt nanostructures cleaner, exhibiting much higher reactivity. Scanning electron microscopic images revealed that 2D FPNs were spherical Pt nano-flowers constructed by the smallest building blocks, nano-leaves. The number density of spherical Pt nano-flowers can be tuned by controlling the electrodeposition time. High resolution transmission electron microscopic images indicated that each nano-leaf was formed by growing along Pt(111) direction. Electrocatalytic activities of as-prepared 2D …
Effecting Of Dissolved Oxygen On Microbial Fuel Cells Based On Pseudomonas Aeruginosa,
2014
Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021, Fujian, China;
Effecting Of Dissolved Oxygen On Microbial Fuel Cells Based On Pseudomonas Aeruginosa, Chang-Li Cao, Li-Xiang Chen, Ran-Ran Wu, Ken-Lin Chang, Feng Zhao
Journal of Electrochemistry
In this work, the reaction between the electron shuttle secreted by Pseudomonas aeruginosa and anode was studied by measuring cyclic voltammogram and open circuit potential. The effect of dissolved oxygen on the oxidation reaction of anode was explored. It was demonstrated that the reaction was a diffusion-controlled and reversible process. The anode was a little affected when the dissolved oxygen of inocula was low (0 ~ 1.6 mg·L-1). The polarization curves showed that the current output of microbial fuel cells decreased 7% with the impact of dissolved oxygen.
Room Temperature Ionic Liquid Templated Meso-Macroporous Material By Self-Assembled Giant Gold Nanoparticles And Its Enhancement On The Direct Electrochemistry Of Cytochrome C,
2014
State Key Laboratory for Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;
Room Temperature Ionic Liquid Templated Meso-Macroporous Material By Self-Assembled Giant Gold Nanoparticles And Its Enhancement On The Direct Electrochemistry Of Cytochrome C, Pei Li, Dong-Ping Zhan, Yuan-Hua Shao
Journal of Electrochemistry
Room temperature ionic liquid (RTIL) is used as a soft-template to organize a meso-macroporous material constructed by self-assembled giant gold nanoparticles which are capped by L-cysteine. First, L-cysteine capped gold nanoparticles can self-assembly to form nanowires and sub-micrometer spherical giant particles due to the static interaction and/or the condensation reaction between the carboxyl and amino groups at the outer terminal of the ligand. Second, the spherical assembled particles can form a quasi-solid gel when grinding with a hydrophobic RTIL, 1-octyl-3-metyllimidazolium hexafluorophosphate. Finally, when the composite gel is coated on a glassy carbon electrode and then polarized by using cyclic voltammetry …
Preparation Of Pt-Tio2/Graphene Composites With High Catalytic Activity Towards Methanol Oxidation And Oxygen Reduction Reaction,
2014
Eco-materials and Renewable Energy Research Center, Nanjing University, Nanjing 210093, China;College of Engineering and Applied sciences, Nanjing University, Nanjing 210093, China;Jiangsu Key Laboratory for Nano Technology, Nanjing University, Nanjing 210093, China;
Preparation Of Pt-Tio2/Graphene Composites With High Catalytic Activity Towards Methanol Oxidation And Oxygen Reduction Reaction, Li Qi, Ying Yin, Wen-Guang Tu, Bing-Bing Wu, Zhao-Sheng Wang, Jian-Guo Liu, Jun Gu, Zhi-Gang Zou
Journal of Electrochemistry
A series of graphene-supported TiO2 nanoparticles (TiO2/G) with different TiO2 contents were prepared by a facile hydrothermal method, and then the Pt-TiO2/G catalysts were successfully prepared by reducing Pt-precursor with microwave technique. Compared with Pt-G catalysts, the catalytic performance toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) of Pt-TiO2/G catalysts was improved due to the addition of TiO2. However, the excessive TiO2 would lead to a poor catalytic performance of Pt-TiO2/G catalysts because of the low electrical conductivity of TiO2.
In-Situ Afm Force Curve Investigations On Layered Structures Of Au(111)-Ionic Liquid Interfaces And Temperature Dependence,
2014
State Key Laboratory of Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;
In-Situ Afm Force Curve Investigations On Layered Structures Of Au(111)-Ionic Liquid Interfaces And Temperature Dependence, Xiao Zhang, Yun-Xin Zhong, Jia-Wei Yan, Bing-Wei Mao
Journal of Electrochemistry
By utilizing in-situ AFM force curve measurements systematic investigations have been carried out on Au(111)-ionic liquid interface in BMIPF6 and OMIPF6 of imidazolium-based ionic liquids with different lengths of alkyl side chains. The temperature dependence of the number, thickness and stability of the layered structures of each system are studied by performing AFM force curve measurements at potentials far negative of the PZC. The layered structures at Au (111)/BMIPF6 interface are composed of two charged interior layers and two neutral exterior layers at -1.0 V, while those at Au (111)/OMIPF6 interface only one charged interior layer …
Cyclic Voltammetric Studies In Adsorption Of Cetyltrimethylammonium Bromide (Ctab) On Au(111) Electrode,
2014
State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian, 361005,China;
Cyclic Voltammetric Studies In Adsorption Of Cetyltrimethylammonium Bromide (Ctab) On Au(111) Electrode, Ling Chen, Chang-Deng Xu, Jin-Yu Ye, Chun-Hua Zhen, Shi-Gang Sun
Journal of Electrochemistry
Adsorption of cetyltrimethylammonium bromide (CTAB) on Au(111) electrode was investigated by cyclic voltammetry (CV). The results demonstrate that the adsorption of CTAB on Au(111) yields particular CV features. Both the adsorption of CTA+ and the phase change of the surfactant film are surface structure selective. Two pairs of stable sharp peaks that depend on halide species appear upon the adsorption of cationic surfactant on Au(111) electrode. The relationship between the peak current density and the scan rate indicates that the electron transfer reaction was controlled by diffusion process. These CV features are observed for the first time, and reflect …
Electrochemical Catalysis: A Dft Study,
2014
School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China;
Electrochemical Catalysis: A Dft Study, Li Li, Zi-Dong Wei
Journal of Electrochemistry
In this review, we focus on achievements in electro-catalysis based on the density function theory study. The relationships among the electrode potential, electronic structure of catalysts and electro-catalytic activity are summarized in three parts: the adsorption and desorption of species, electron transfer, and stability of catalysts. The electrode potential and the electronic structure (d-band center or Fermi (HOMO) energy) of catalysts significantly influence the formation, adsorption and desorption of surface species on electrode. The electro-catalytic activity can be improved by modulating the electrode potential and electronic structure of catalysts.
Investigation Of The Dynamics Of Photocarriers During Photoelectrochemical Water Splitting By Combination Of Photoelectrochemistry And Transient Absorption Spectroscopy,
2014
Department of Chemistry, Zhejiang University, Hangzhou 310027, China;
Investigation Of The Dynamics Of Photocarriers During Photoelectrochemical Water Splitting By Combination Of Photoelectrochemistry And Transient Absorption Spectroscopy, Wen-Hua Leng
Journal of Electrochemistry
Semiconductor photoelectrochemical hydrogen production is an important and promising technology for utilizing solar energy. The efficiency of hydrogen production depends on the efficiencies of separation and transport of photo-generated carriers. A deep understanding of the behavior of these processes has guiding significance for designing efficient solar hydrogen device. photoelectrochemical and transient absorption spectroscopy methods are powerful tool for studying the microscopic dynamics and mechanism of photocatalytic reaction. This review describes the part of the latest results of the author regarding the semiconductor photoelectrochemical hydrogen production obtained by these methods,and the problems and future research priorities in this field are proposed.
Recent Progress In The Mechanistic Understanding Of Formic Acid Oxidation On Pt Electrode,
2014
Hefei National Laboratory for Physical Science at Microscale and Department of Chemical Physics, University of Science and Technology of China, Hefei, 230026, China;
Recent Progress In The Mechanistic Understanding Of Formic Acid Oxidation On Pt Electrode, Jie Xu, Dao-Chuan Jiang, Dong Mei, Zheng-Da He, Yan-Xia Chen
Journal of Electrochemistry
This article reviews the recent progress in understanding of the mechanisms for formic acid oxidation on Pt electrode. There are two pathways for formic acid oxidation on Pt electrode: (1) Indirect Pathway through which HCOOH is oxidized to CO2 through COad intermediate. This pathway contributes only 1% of the total current; (2) Direct Pathway where HCOOH is oxidized directly to CO2. The results from IR Spectroscopy, single-crystal electrochemistry and DFT calculation all support that the bridge-bonded formate is neither the intermediate of direct pathway nor the precursor for COad formation in indirect pathway. Possible mechanism …
Preparation And Lithium Storage Performance Of Sn-Snsb Nanoparticles,
2014
Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005;
Preparation And Lithium Storage Performance Of Sn-Snsb Nanoparticles, Yao Xiao, Jiao-Hong Wu, Qi Wang, Ling Huang, Jun-Tao Li, Shi-Gang Sun
Journal of Electrochemistry
Tin was widely studied as alternative anode material to carbon for lithium-ion batteries thanks to its much higher theoretical capacity. However, a pure tin electrode suffers severely from its poor cycleability due to mechanical fatigue caused by volume change during lithium insertion and extraction processes. Tin-based alloy may improve the cycleability property of tin electrode. In this article, we report facile synthesis of spherical Sn-SnSb nanopartciles using a simple solvent-thermal approach. It is amazing to find that the spherical Sn-SnSb nanoparticles can circumvent volume changes effectively during charge-discharge process. Electrochemical discharge/charge results show that the spherical Sn-SnSb nanoparticles electrode exhibits …
High Sensitive Detection Of Cd(Ii) And Pb(Ii) Based On Antimony-Film Covered Pencil Core Electrodes,
2014
Key Laboratory of Analysis and Detection Technology for Food Safety, Ministry of Education, Fujian Provincial Key Laboratory of Analysis and Detection for Food Safety, College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350002, China;
High Sensitive Detection Of Cd(Ii) And Pb(Ii) Based On Antimony-Film Covered Pencil Core Electrodes, Shan Chen, Zhao-Yan Zheng, Yi-Min Fang, Li-Qing Zheng, Jian-Jun Sun
Journal of Electrochemistry
In this paper, a pencil core was used as the substrate for an antimony-film electrode for simultaneous detection of Cd(II) and Pb(II) by square-wave anodic stripping voltammetry (SWASV). With the deposition time of 180 s, the low limit of detection (LOD) for the electrode was determined to be 0.075·g?L-1 for Cd(II), while 0.13·g·L-1 for Pb(II) with good reproducibility in low pH solutions (pH = 2). The results show a much lower LOD than that of bismuth-film pencil core electrode. Finally, this antimony-film electrode was successfully applied to determine Cd(II) and Pb(II) in tap water.
A Sensitive And Label-Free Electrochemical Aptasensor Based On Signal Amplification Of Carbon Nanotubes,
2014
College of Pharmacy, Central South University, Changsha 410083, China;College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China;
A Sensitive And Label-Free Electrochemical Aptasensor Based On Signal Amplification Of Carbon Nanotubes, Chun-Yan Deng, Hui-Min Fan, Juan Xiang, Yuan-Jian Li
Journal of Electrochemistry
A label-free electrochemical sensing electrode for highly sensitive detection of adenosine was constructed based on the signal amplification of carbon nanotubes (CNTs). The change in the interfacial feature of the modified electrode was characterized by electrochemical impedance spectroscopy. Using [Ru(NH3)6]3+ as the signaling moiety, adenosine with concentrations as low as 0.027 nmol·L-1 can be selectively detected. Additionally, the fabrication of this present aptasensor was simple, time-saving and cost-effective. Compared with other reported aptasensors, the proposed aptasensor had advantages of excellent sensitivity, selectivity and simplicity, which plays a potential role in development of aptasensor.
Determining Force Field Parameters Involved With Metal Organic Framework Synthesis,
2014
CSULB
Determining Force Field Parameters Involved With Metal Organic Framework Synthesis, Marcus A. Tubbs, David Cantu, Vanda Glezakou
STAR Program Research Presentations
Metal organic frameworks (MOFs) are synthetic materials made of a cage-like lattice with consistently spaced pores. The size of these pores are the defining characteristic of a MOF, as it determines which gases are allowed to pass through and which can be trapped. Examples of their potential use can be greenhouse gas sequestration or storage. Currently, the synthesis of MOFs is based on trial-and-error, and the successes are not well understood. We are working on building the theoretical framework that describes how a particular MOF, MIL-101, comes together during synthesis. Our initial approach was to simulate the possible reactions with …
Does A Plastron Improve Heat Transfer?,
2014
The City College of New York
Does A Plastron Improve Heat Transfer?, Madani A. Khan, Jeffrey Alston, Andrew Guenthner
STAR Program Research Presentations
Superamphiphobic surfaces strongly repel both water and oils. In this work, aluminum coupons are processed by sanding with various grit of sand paper to impart microscale roughness. Subsequent submersion of the aluminum substrate in boiling water grows nanoscale grass-like structures. The oxide layer of Al is slightly soluble in water. During a fast diffusion/equilibrium, Al2O3 nanograss grows on the surface. A low energy coating is then deposited on the surface. The micro and nanoscale features create re-entrant structures that trap air enabling contact liquid to be in a Cassie-Baxter state. Superamphiphobicity of the samples were confirmed by …
Isotropic Oscillator Under A Magnetic And Spatially Varying Electric Field,
2014
East Tennessee State University
Isotropic Oscillator Under A Magnetic And Spatially Varying Electric Field, David L. Frost Mr., Frank Hagelberg
Undergraduate Honors Theses
We investigate the energy levels of a particle confined in the isotropic oscillator potential with a magnetic and spatially varying electric field. Here we are able to exactly solve the Schrodinger equation, using matrix methods, for the first excited states. To this end we find that the spatial gradient of the electric field acts as a magnetic field in certain circumstances. Here we present the changes in the energy levels as functions of the electric field, and other parameters.
Heat Release Of Polyurethanes Containing Potential Flame Retardants Based On Boron And Phosphorus Chemistries,
2014
University of Dayton
Heat Release Of Polyurethanes Containing Potential Flame Retardants Based On Boron And Phosphorus Chemistries, Vladimir Benin, Bastien Gardelle, Alexander Morgan
Chemistry Faculty Publications
Using a polyurethane of methylene diphenyl isocyanate and 1,3-propane diol, several new non-halogenated aromatic boron and phosphorus flame retardants were evaluated for heat release reduction potential using the pyrolysis combustion flow calorimeter (PCFC). The polyurethanes were prepared in the presence of the potential flame retardants via solvent mixing and copolymerization methods, and were then analyzed via spectroscopic methods to determine if the flame retardant was still present in the final product. PCFC testing on the resulting products showed that the flame retardant molecule can have different effects on heat release depending upon how it is mixed into the polyurethane. Some …
Fundamental Studies On Copper Zeolites For Catalytic No X Abatement,
2014
Purdue University
Fundamental Studies On Copper Zeolites For Catalytic No X Abatement, Anuj Arun Verma
Open Access Dissertations
Stringent regulations in mobile NOx emissions have resulted in the development of Standard Selective Catalytic Reduction (SCR) as the dominant NOx abatement technology in lean burn diesel engines. Standard SCR is a reaction of nitric oxide (NO) with ammonia (NH3), in the presence of oxygen (O 2) to form nitrogen (N2) and water (H2O). Copper containing zeolites show commercially viable SCR performance. Cu-SSZ-13 (CHA framework), a member of this family, is a preferred catalyst for SCR applications because it shows exceptional hydrothermal stability in addition to commercially viable SCR performance. Our work focuses …
Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry,
2014
University of Dayton
Determination Of Corrosion Inhibitor Lubricity Improver In Jet Fuel By Liquid Chromatography-Electrospray Ionization Mass Spectrometry, David W. Johnson, Milissa Flake, Ryan Adams
Chemistry Faculty Publications
Military jet fuel (JP-8) is very similar to commercial jet fuel (Jet A) except for the presence of three additives, fuel system icing inhibitor, corrosion inhibitor–lubricity improver (CI-LI), and antistatic additive, which are added to improve characteristics of JP-8. Of particular interest is the CI-LI additive; the most common active ingredient is a dimer of linoleic acid. This article focuses on quantification of the active ingredient in the CI-LI additive by liquid chromatography–mass spectrometry (LC–MS). This method will allow the determination of CI-LI content in military jet fuel samples.
