Materials Chemistry Commons^™

Cvd Preparation And Application Of 3d Graphene In Electrochemical Energy Storage, Yong-Kang Xia, Ming-Yuan Gu, Hong-Guan Yang, Xin-Zhi Yu, Bing-An Lu

Journal of Electrochemistry

Three-dimensional (3D) graphene combinations with the excellent intrinsic properties of graphene and the 3D micro/nano porous structures provide a graphene foam with high specific surface area, excellent mechanical strength and fast electron and mass transports. The 3D graphene foam and its composite nanomaterials are widely used in the fields of nano-electronics, energy storage, chemical and biological sensing. The 3D graphene foam prepared by chemical vapor deposition (CVD) method is of high purity and crystallinity.  In this review, a brief overview in the CVD preparations of 3D graphene and properties of CVD prepared 3D graphene based nanomaterials in electrochemical energy storage …

Applications Of Advanced Imaging Technologies For Critical Issues Of All-Solid-State Lithium Battery Studies, Yi-Bo Zhao, Hui-Hui Liu, Song-Liang Chen, Shou-Hang Bo

Journal of Electrochemistry

All-solid-state lithium batteries have attracted much attention for their high energy density and good safety. To increase their efficiency and prolong their service life, it is necessary to achieve high ion conductivity at the electrode/electrolyte interface and in the electrolyte, as well as to eliminate dendrites growth in the battery. Based on the critical requirements outlined above, this paper discusses the applications of advanced imaging technologies in relevant studies. Recent progresses in investigations of all-solid-state lithium batteries by imaging techniques including electron microscopy, scanning probe microscopy, X-ray tomography, magnetic resonance imaging and optical microscopy are summarized.

Ni/Mn3O4/Nimn2O4 Double-Shelled Hollow Spheres Embedded Into Reduced Graphene Oxide As Advanced Anodes For Sodium-Ion Batteries, Chong Yan, Hua-Ri Kou, Bo Yan, Xiao-Jing Liu, De-Jun Li, Xi-Fei Li

Journal of Electrochemistry

Delicately building the unique nanocomposite with the combination of hollow structure and reduced graphene oxide (rGO) is highly desirable and still remains a great challenge in the field of energy conversion and storage. In this work, Ni/Mn₃O₄/NiMn₂O₄ double-shelled hollow spheres coated by rGO (denoted as R-NMN) have been successfully synthetized via one-step rapid solvothermal treatment followed by subsequent annealing for the first time. Served as anodes for sodium ion batteries (SIBs), the R-NMN composite containing 25wt% rGO exhibits a high discharge capacity of 187.8 mAh·g^-1 after 100 cycles at 50 mA·g^{-1 …}

Preface On Special Issue Of Next-Generation Secondary Batteries, Zhen Zhou, Quan-Feng Dong

Journal of Electrochemistry

No abstract provided.

Recent Progress On Tio2-Based Anode Materials For Sodium-Ion Batteries, Si-Tian Lian, Jian-Shuai Lv, Qiang Yu, Guang-Wu Hu, Zhuo Chen, Liang Zhou, Li-Qiang Mai

Journal of Electrochemistry

Titanium dioxide (TiO₂) represents a stable, low-cost, and nontoxic anode material for sodium-ion batteries (SIBs). However, the low electrical conductivity limits its electrochemical activity (specific capacity) and rate capability, hindering its widespread applications. In this article, we show that different crystal forms of TiO₂ have different pore structures, resulting in the distinct sodium storage capacities. Accordingly, the article introduces how TiO₂ microstructures influence sodium storage. The nanoparticle structure can improve the rate performance of the material due to its short ion diffusion distance, and the internal cavity of the hollow structure is beneficial to cycle stability. …

Recent Progress In Vanadium-Based Electrode Materials, Meng-Lei Sun, Da-Qi Zhang, Jin-Kui Feng, Jiang-Feng Ni

Journal of Electrochemistry

It is an important solution to solve energy storage problems by developing inexpensive and safe lithium-ion and sodium-ion batteries with superior performance. Vanadium-based electrode materials are promising electrode materials because of diversified chemical valences, open structures and high theoretical capacities. In the past few years, vanadium-based electrode materials such as oxides, sulfides, and phosphates have achieved a considerable development in the battery field, It is,  therefore, necessary to summarize their recent research progress. In this review, we particularly highlight the key challenges that are facing in the application of vanadium materials, such as low ion diffusion coefficient and poor structural …

Recent Progress In Key Materials For Room-Temperature Sodium-Ion Batteries, Fan-Fan Wang, Xiao-Bin Liu, Long Chen, Cheng-Cheng Chen, Yong-Chang Liu, Li-Zhen Fan

Journal of Electrochemistry

Sodium-ion batteries (SIBs) have attracted tremendous attention in large-scale energy storage applications due to their resource advantages. However, Na+ is larger and heavier than Li+, which will limit its reversible reaction with the electrode materials and result in poor electrochemical performance. Thus, developing stable and high-efficiency electrode materials is the key to promoting the practical application of SIBs. Furthermore, the optimization of electrolyte is essential for the construction of high-safety and long-lifespan SIBs. In this review, we mainly summarize the recent advancements of electrode materials and electrolytes for room-temperature SIBs and discuss their challenges and possible resolution strategies. We hope …

Recent Developments In Surface/Interface Modulation And Structure-Performance Relationship Of Cathode Catalysts For Li-Air Batteries, Rui Gao, Jun-Kai Wang, Zhong-Bo Hu, Xiang-Feng Liu

Journal of Electrochemistry

Lithium-air battery has been considered to be one of the most promising secondary battery systems because of its high energy density. However, the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) on the cathode, and the high overpotential, poor cycle stability and low rate capacity have severely blocked the development and application of Li-air battery. One of the effective strategies to alleviate these issues is to develop cathode catalysts for Li-air batteries. The design and development of bifunctional cathode catalysts with high activity and efficiency on both ORR and OER is highly desired for Li-air …

Synthesis Of Flower-Like Vanadium Disulfide For Lithium Storage Application, Pan Li, Jian Liu, Wei-Yi Sun, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

In order to improve the electrochemical properties of vanadium disulfide (VS₂) as an electrode material in Li-ion battery, the flower-like VS₂ was prepared by a one-step hydrothermal method with the addition of polyethylene glycol 400. The phase and morphology of the product were characterized by using X-ray diffraction and field emission scanning electron microscopy. During the growth process, it was observed that the flower-like VS₂ was interspersed with several hexagonal vanadium disulfide nanosheets, which had a high specific surface area and excellent structural stability. The flower-like VS₂ was used for the cathode material test in …

Slips-Teng: Robust Triboelectric Nanogenerator With Optical And Charge Transparency Using A Slippery Interface, Wanghuai Xu, Xiaofeng Zhou, Chonglei Hao, Huanxi Zheng, Yuan Liu, Xiantong Yan, Zhengbao Yang, Michael Leung, Xiao Cheng Zeng, Ronald X. Xu, Zuankai Wang

Xiao Cheng Zeng Publications

Energy harvesting devices that prosper in harsh environments are highly demanded in a wide range of applications ranging from wearable and biomedical devices to self-powered and intelligent systems. Particularly, over the past several years, the innovation of triboelectric nanogenerators (TENGs) that efficiently convert ambient kinetic energy of water droplets or wave power to electricity has received growing attention. One of the main bottlenecks for the practical implications of such devices originates from the fast degradation of the physiochemical properties of interfacial materials under harsh environments. To overcome these challenges, here we report the design of a novel slippery lubricant-impregnated porous …

Toward Unraveling The Mechanisms Of “Green” Mechanochemical Reactions, Richard Chen, Mehmet Kerem Gokus

Undergraduate Research Symposium

The mechanical processing of solids, such as milling or grinding powders, often leads to mechanochemical reactions. Mechanochemistry affords “green” synthetic routes avoiding or reducing the use of solvents, thus providing environmentally friendly and cost-effective synthetic alternatives for many materials. The solid-state reactants are usually ground together with small quantities of organic solvents, called “liquid assisted grinding” (LAG). LAG increases the reaction rates, it can yield products from otherwise unreactive mixtures, it increases the products crystallinity, and it selectively leads to crystal structures (polymorphs) of the products, depending on the quantities and physicochemical properties of the liquids used in LAG.

Mechanochemistry …

Effect Of Dissolved Salts On The Physiochemical Properties Of Deep Eutectic Solvents, Eleanor Haeska, Megan Radtke

The Journal of Undergraduate Research

Green chemistry seeks to make chemical procedures safer, improve reaction efficiency, and utilize environmentally safe reagents. Deep eutectic solvents (DES) have recently become of great interest due to their eco-friendly nature and functionality as solvent for various chemical processes. One key characteristic of DES is their conductive nature and depressed melting point. This project sought to determine the effect of the addition of aqueous solutions of halides on the conductivity of two selected types of DES. Also assessed were the polarity and viscosity of the DES. It can be concluded that aqueous halides had no measureable effect on the conductivity …

Facile Synthesis Of A Tailored-Designed Au/Pt Nanoanode For Enhanced Formic Acid, Methanol, And Ethylene Glycol Electrooxidation, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof

Chemical Engineering

The recent revolution in nanoscience and global energy demand have motivated research in liquid fuel cells (LFCs) due to their enhanced efficiency, moving flexibility, and reduced contamination. In line with this advancement, a glassy carbon (GC) electrode was modified with platinum (PtNPs) and gold (AuNPs) nanoparticles to fabricate a nanosized anode for formic acid, methanol, and ethylene glycol electrooxidation (abbreviated, respectively, to FAO, MO, and EGO), of the key anodic reactions of LFCs. The deposition sequence of the catalyst’s layers was important where the Au/Pt/GC electrode (in which PtNPs were directly deposited onto the GC surface followed by AuNPs—surface coverage …

Reaction Mechanism Between Small-Sized Ce Clusters And Water Molecules: An Ab Initio Investigation On CeN+H2O, Rulong Zhou, Yang Yang, Seema Pande, Bingyan Qu, Dongdong Li, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Reactions of small-sized cerium clusters Ce_n (n = 1–3) with a single water molecule are systematically investigated theoretically. The ground state structures of the Ce_n/H₂O complex and the reaction pathways between Ce_n + H₂O are predicted. Our results show the size-dependent reactivity of small-sized Ce clusters. The calculated reaction energies and reaction barriers indicate that the reactivity between Ce_n and water becomes higher with increasing cluster size. The predicted reaction pathways show that the single Ce atom and the Ce₂ and Ce₃ clusters can all easily react with H …

Organizing 6, 5-Carbon Nanotubes On Dna Origami Arrays, Kathryn A. Pitton

Theses, Dissertations and Capstones

Carbon nanotubes¹ are cylindrical carbon molecules and can be considered to be composed of one atom thick sheets of carbon called graphene. They have been at the forefront of nanochemistry due to their strength and multiple properties such as absorption, fluorescence, semiconduction, and light scattering capability. DNA Origami (DO)² has emerged as a novel domain for molecular design, resulting in the generation of numerous one, two, and three-dimensional structures that have provided platforms for the organization of organic species and inorganic nanoparticles through simple modifications. The use of DNA Origami to control the placement of single walled carbon …

Au60–: The Smallest Gold Cluster With The High-Symmetry Icosahedral Core Au13, Seema Pande, Xingao Gong, Lai-Sheng Wang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Among coinage metal nanoclusters with 55 atoms, only Ag₅₅^– and Cu₅₅^– are the geometric magic-number clusters, as both exhibit icosahedral symmetry. Au₅₅^–, however, exhibits much lower symmetry due largely to the strong relativistic bonding effect. In this study, we collect a much larger population (>10,000 isomers) of low-energy isomers of Au₅₅^– to Au₆₀^– by using the combined density-functional theory and basin-hopping global optimization method. We also include the spin−orbit effect in the density-functional theory computation to achieve simulated photoelectron spectra in quantitative fashion. Remarkably, we uncover that the …

Microstructure Evolution And Electrochemical Properties Of Tio 2 /Ti-35nb-2ta-3zr Micro/Nano-Composites Fabricated By Friction Stir Processing, Hao Gu, Zihao Ding, Zhi Yang, Weiqiang Yu, Wenjie Zhang, Weijie Lu, Lai-Chang Zhang, Kuaishe Wang, Liqiang Wang, Yuan-Fei Fu

Research outputs 2014 to 2021

Forming stable anti-corrosion surface layer and homogenized microstructure on the surface of material has become a major challenge in developing biomedical β titanium alloy. In the study, TiO 2 /Ti-35Nb-2Ta-3Zr anti-corrosion micro/nano-composites with different amount of TiO 2 particles were successfully fabricated by one-pass friction stir processing (FSP). The composition, microstructure and electrochemical properties of the material are characterized systematically. In particular, compact passive oxide films formed on surface of the material after electrochemical corrosion are elaborated from constituent, thickness and structural characteristics. Furthermore, the relationship between various FSP parameters, microstructure presented and corresponding corrosion resistance has been discussed in …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …