Materials Chemistry Commons^™

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Immobilization Of Ni(Ii) On Amine-Functionalized Mesoporous Silica As Catalyst For Benzyl Alcohol Acetylation Reaction, Wardah Nabilah, Eko Sri Kunarti, Fajar Inggit Pambudi

Makara Journal of Science

In this study, amine-functionalized and Ni(II)-immobilized mesoporous silica materials were synthesized. This research aimed to synthesize mesoporous silica based on rice husk ash functionalized with amine and immobilized with Ni(II). The activity of amine-functionalized and Ni(II)-immobilized mesoporous silica materials was studied for the acetylation of benzyl alcohol with acetic anhydride as the acetylating agent. First, mesoporous silica was synthesized using rice husk ash using the sol–gel method, followed by amine functionalization using (3-aminopropyl)triethoxysilane (APTES) and Ni(II) immobilization through ultrasonic treatment. The results obtained showed that amine-functionalized and Ni(II)-immobilized mesoporous silica (SiO₂/APTES/Ni(II)) were successfully synthesized, confirmed by Fourier transform …

Research On Development Status And Strategy Of Advanced Materials In Guangdong-Hong Kong-Macao Greater Bay Area, Ziwei Zhao, Can Wang, Weihua Wang, Qingli Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Advanced materials are an important source of new quality productivity. Guangdong-Hong Kong-Macao Greater Bay Area is now facing the internal and external pressure of manufacturing upgrading, and there is an urgent need to play the leading and supporting role of advanced materials in the construction of modernized industrial system. This study combs through the basic situation of the development of materials science and industry in Guangdong-Hong Kong-Macao Greater Bay Area, analyzes its advantages, characteristics and problems in depth, and puts forward a number of suggestions around how to develop materials science, technology, and industry in the Greater Bay Area.

The Reveal: A Technical Study And Conservation Treatment Of An Overpaint Portrait, Camille Ferrer

Art Conservation Master's Projects

A severely damaged 19th-century oil painting depicting a portrait of a woman was treated at Patricia H. and E. Garman Art Conservation Department. A typed letter provided by the owner mentioned that it has been previously restored yet returned with unsatisfactory results. After further examination, the painting appeared to have been previously treated multiple times by different people. There was overpaint distinctly present on the face and later discovered to be present overall. The full state of condition of the painting was initially unknown due to the sum of the surface being overpainted. However, there were evidence of paint loss …

Asphalt-Binder Mixtures Evaluated By T1 Nmr Relaxometry, Rebecca M. Herndon, Jay Balasubramanian, Magdy Abdelrahman, Klaus Woelk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt pavements make up a majority of the essential transportation systems in the US. Asphalt mixtures age and degrade over time, reducing the pavement performance. Pavement performance critically depends on the aging of asphalt binder. the aging of asphalt binder during construction is traditionally modeled by rolling thin film oven (RTFO) testing, while aging during service life is modeled by pressure aging vessel (PAV) testing. Comparing these models to the aging of binders in actual pavements is limited because, to be used for current testing, binders must be separated from the pavement's aggregate by solvent extraction. Solvent extraction will, at …

Structural, Electronic And Magnetic Properties Of Vanadium Doped Transition Metal Dichalcogenides (Tmds), Qudsia Ashraf

Dissertations, Theses, and Capstone Projects

Magnetic semiconductors are a prerequisite for spintronic devices but their ferromagnetism disappears at room-temperature hindering application in room temperature electronic devices. Enormous research has been conducted on the room-temperature ferromagnetic order in monolayer form of bulk van der Waals materials but the few layer system has not been extensively explored.

Doping is an effective approach to modulate the structural, electronic and magnetic properties of two-dimensional (2D) Transition metal dichalcogenides (TMDs) and expand their application. The effect of vanadium dopant on structural, electronic and magnetic properties of Tungsten Diselenide (WSe₂) was studied by X-ray Photoelectron Spectroscopy (XPS), Atomic Force …

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

A Coarse-Grained Molecular Dynamics Study Of Gas Hydrate Formation And Dissociation, Meisam Adibifard

LSU Doctoral Dissertations

The study of gas hydrates has increased significantly over the last two decades because of their potential application in energy storage, production and transportation, water desalination, refrigeration, gas separation, etc. There is a significant interest in commercially developing natural gas hydrates because the energy content of methane hydrate reservoirs (MHRs) is at least twice that of all conventional fossil fuels combined. Additionally, due to the higher storage capacity of hydrates, it is proposed to sequester CO₂ in the form of CO₂ hydrate, thereby reducing the amount of greenhouse gases. Hence, hydrates offer a dual solution to two of …

Syntheses, Characterizations And Reactions Of Acene-2,3-Dicarbaldehydes, Glen Miller, Qian Liu

Faculty Publications

Here, we report improved syntheses, detailed characterizations and reactions of a series of acene-2,3- dicarbaldehydes including tetracene-2,3-dicarbaldehyde. DFT calculations corroborate and complement the experimental results. Tetracene-2,3-dicarbaldehyde and the benchmark organic semiconductor pentacene have isoelectronic p-systems and similar HOMO–LUMO gaps. Tetracene-2,3-dicarbaldehyde is soluble in a host of organic solvents (e.g., DMF, toluene, THF, chloroform, dichloromethane) and shows excellent photooxidative resistance in solution phases exposed to light and air. Further, it is readily sublimed from the solid-state without decomposition, and can be functionalized using different chemistries. We have demonstrated the utility of acene-2,3-dicarbaldehydes as reactants in the syntheses of novel diaryl-2,3-acenedimethanols and …

Feasibility Study Of Using Energy Extracted From The Process Of Electrochemically Consumed Of Al 2024 For Powering Daily Used Electric Car, Yanuar Mohamad Marda, Rini Riastuti, Muhammad Hamka Ibrahim

Journal of Materials Exploration and Findings

Usage of green energy for transportation has become important due to the contribution of transportation activity to climate change. Electrochemical energy has been used as a source of green energy. The objective of this work is to evaluate sufficiency of energy provided by electrochemically consumed Al 2024 for supplying energy to daily used PHEV electric car. Study of previous articles, observation of typical amount of energy required, electrochemical galvanic cell experiments, and simple calculations have been conducted to determine produced energy feasibility. Electrical energy produced by consuming 340 gr of Al 2024 in galvanic cells has the total lifetime of …

Functional Electrolytes Designing And Studying For Lithium Metal And Non-Aqueous Zinc Metal Batteries, Liping Zhang

All Graduate Theses and Dissertations, Fall 2023 to Present

Our current energy policy relies heavily on burning fossil fuels, raising serious concerns due to CO₂-related global warming. Consequently, significant progress is being made in pursuing renewable and green energy sources, such as solar, wind, and geothermal energy. These renewable energies require rechargeable batteries as energy storage systems to compensate for their intermittent nature.

Over the decades, lithium-ion batteries (LIBs) have become the dominant power sources for portable electronic devices. Current LIBs rely on graphite anodes with a limited theoretical capacity (372 mAh g^-1), which restricts their advanced applications. Li metal (Li⁰) anodes, with …

Enhanced Rate Capability And Capacity Of Lib Full Cells Achieved Through Aerosol Jet Printing, Rodrigo Rodriguez, L. Jay Deiner, Bang-Hung S. Tsao, Joseph P. Fellner

Publications and Research

Thick lithium-iron phosphate (LFP) cathodes (31 mg cm−2) with rationally engineered pore structure and tortuosity were manufactured with an aerosol jet (AJ) printer. Cathode pore structuring was tuned by controlling the rate at which the printed ink dried. Slow-drying prints yielded smoother cathodes while fast-drying prints resulted in mesoscale structuring with substantial surface roughness. X-ray tomography further revealed that the rapid drying of AJ printed LFP cathodes produced low-tortuosity pore channels which were preserved after calendering. Full cells comprised of AJ print optimized LFP cathodes, with 30 mg cm−2 active material loadings, and capacity-matched, AJ printed lithium titanate anodes were …