Polymer Chemistry Commons^™

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, Datu Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings (JMEF)

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings (JMEF)

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Synthesis Of Poly(Styrene-Co-Butyl Acrylate) Pickering Emulsion With Montmorillonite Nanoparticles And Its Comparison With Sodium Dodecyl Sulfate Surfactant On Affecting The Water Barrier Properties Of Coated Paper, Chidubem H. Uchefuna

Electronic Theses and Dissertations

Water-borne barrier dispersion coatings on paper have emerged as an alternative to extrusion coatings on paper due to improved recycling, high application speed, and other end of life attributes. Pigments are often added to improve the performance of dispersion coatings. The use of pigments to form a Pickering emulsion during the polymerization step for the production of a barrier coating on paper has not been discussed in the literature.

In this study, montmorillonite (MMT) pigment varied from 0-6 % pigment volume concentration (PVC) was used to synthesize dispersion coatings consisting of poly(styrene-co-butylacrylate) latex and compared with sodium dodecyl …

Enhanced Mechanical Strength Of Soybean Oil-Based Non-Isocyanate Polyurethane Adhesive For Wood Application By Introducing Nanofillers, Vatsal Chaudhari

Electronic Theses & Dissertations

Polyurethane (PU) is a versatile material that finds extensive use in various industries including bedding, construction, automotive, and packaging. Historically, this particular polymer relied significantly on petrochemical resources, a practice that was considered to have negative environmental impacts. The conventional method for preparing PU involves the use of isocyanate, which is a disadvantage due to its negative impact on the environment and human health. The resolution of this problem entails identifying an appropriate substitute for petroleum-derived products that minimize their impact on both the environment and human health. The researchers earlier utilized soybean oil, for the formulation of PUs in …

Optimization Of Transition-Metal Inclusive Carbon Aerogels For Electrochemical Energy Applications, Allen Dalton Davis

Electronic Theses & Dissertations

The ever-growing need for energy alongside rising concerns for climate change demands the development of renewable energy technologies. Hydrogen fuel cells are a promising technology that can serve to either supplement energy generation or act as a lone power source. Yet for these devices to be truly green, the hydrogen that serves as fuel must be procured from a renewable resource. Electrolytic water splitting is a process that allows for the dissociation of water into H₂ and O₂. For this process to be practical, the electrolyzer needs to demonstrate high efficiency and stability, as well as a …

Exploring Soybean Oil-Based Polyol And Effect Of Non-Halogenated Flame Retardants In Rigid Polyurethane Foam, Sahithi Kondaveeti

Electronic Theses & Dissertations

To address the increasing demand for sustainable biomaterials due to the depletion of fossil fuel resources and growing environmental concerns, a new type of biodegradable and environmentally friendly rigid polyurethane foam (RPUF) has been synthesized. These foams are derived from chemically modified soybean oil-based polyol obtained from soybean oil by epoxidation followed by a ring-opening reaction. Polyurethane foam is generally used in construction, furniture, and automobile industries but is highly flammable and releases toxic gases and smoke during combustion. In this study, a highly efficient synergistic effect halogen-free flame-retardant (FR) melamine salt, 2-carboxyethyl(phenyl)phosphinic acid melamine salt (CMA) was synthesized from …

Material Formulation And Process Optimization Towards Fabricating Robust 3d Printed Structures, Austin Riggins

Doctoral Dissertations

This dissertation focuses on understanding and addressing the fundamental physicochemical phenomena that lead to weak interfaces and structural warpage in material extrusion 3D printing. Polymeric feedstocks used for this manufacturing technique were manipulated through the incorporation of additives that alter the dynamics of the matrix during and after printing. In Chapter II, adhesion between layers of structures printed from PEEK was strengthened through a combination of low-molecular weight additive incorporation and post-printing thermal annealing. Chapter III reports a method for decreasing the irreversible thermal strain of structures printed from poly(lactic acid) by introducing nanographene and photoinitiator additives into the feedstock …

Upcyclying Of Polyethylene Terephtalate By Addition Of Thermoplastic Elastomer, Diego Francisco Bermudez

Open Access Theses & Dissertations

Continual overconsumption of single-use plastics has generated challenges of solid waste management across the United States. Common plastic waste management solutions, such as landfill, have caused the migration of contaminants into the environment consequently affecting not only the health of wildlife, but also that of human beings. Alternative strategies for the handling of single-use plastic such as polyethylene terephthalate (PET), used in the food packaging industry, can ultimately help mitigate the noxious consequences of single-use plastics affecting entire ecosystems. This study demonstrates a potential avenue of materials upcycling by studying the effects of coupling PET with the thermoplastic elastomer styrene-ethylene-butylene-styrene …

Synthesis Of Block Copolymer Additives For Examining Phase Morphology And Improving Mechanical Properties Of Thermoplastics Elastomers., Bishal Upadhyay

Masters Theses

Polystyrene-block-poly(1,4-butaidene)-block-polystyrene (PS-PB-PS) triblock copolymers are one of the most widely studied thermoplastic elastomers (TPEs) due to their ease of synthesis, non-polar nature, and commercial applicability. Like many block copolymers, incompatibility between PS and PB causes these TPEs to undergo microphase segregation. Many studies have examined the mechanical properties of blends of TPEs and PS homopolymer additives. However, there have been few studies focused on understanding the morphology and mechanical properties of blends of TPEs and copolymer additives with different architectures. Herein, I describe the synthesis of linear and graft copolymer additives based on the random copolymers poly(methyl methacrylate-random-cyclohexyl methacrylate) (PrC). …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

The Influence Of Ion-Ion Correlations On Conductivity In Concentrated Ionic Systems, Md Dipu Ahmed

Masters Theses

This study delves into the fascinating realm of concentrated ionic systems, such as ionic liquids, superionic materials, organic ionic plastic crystals, and polyelectrolytes, which hold immense potential for energy storage applications. The focus is on understanding the intricate role of ionic correlations in shaping their ionic conductivity behavior. These correlations can either boost or impede conductivity, yet their underlying mechanisms remain elusive. Through extensive investigation of various materials, including ionic liquids with differing anionic masses, pure organic ionic plastic crystals, and doped systems, this research employs advanced techniques like dielectric spectroscopy and innovative momentum conservation models to quantify these correlations. …

Nanoparticles And The Environment: Biopolymer Grafted Cellulose And Screen-Printed Carbon Nanotube Composites, Dominique Henry Porcincula

Master's Theses

A host of environmental issues will define the state of the environment in the 21^st century, with plastic pollution and water shortages among them. While solutions to these problems require large-scale, multipronged solutions, one way we can address them is through material innovation and the use of nanoparticles.

In the first project, we address the issue of plastic pollution by creating nanocomposites of biodegradable polymers (PLA and PCL) with cellulose nanofibrils. Here, PLA and PCL are grafted from the surface of cellulose nanofibrils via ring-opening polymerization of cyclic ester monomers. Polymer-grafted cellulose (PGC) is characterized with structural analysis, solubility …

Polymer-Based Nanotherapeutics To Combat Difficult-To-Treat Bacterial Infections, Jessa Marie V. Makabenta

Doctoral Dissertations

The continuous emergence and spread of antibiotic-resistant bacteria are a global health emergency, debilitating the capability to prevent and cure various infectious diseases that were once treatable. Antibiotic therapy is further rendered ineffective due to biofilm formation and the ability of bacteria to thrive and colonize inside mammalian cells. Given the diminishing efficacy of available antibiotics combined with the scarcity of new therapeutics entering the antibiotic pipeline, innovative treatment strategies are urgently in demand. Nanomaterial-based strategies offer ‘outside of the box’ approach for the treatment of antibiotic-resistant bacterial infections. Nanomaterials feature tunable physicochemical properties that can be carefully modified to …

Reactive Chemistries For Protein Labeling, Degradation, And Stimuli Responsive Delivery, Myrat Kurbanov

Doctoral Dissertations

Reactive chemistries for protein chemical modification play an instrumental role in chemical biology, proteomics, and therapeutics. Depending on the application, the selectivity of these modifications can range from precise modification of an amino acid sequence by genetic manipulation of protein expression machinery to a stochastic modification of lysine residues on the protein surface. Ligand-Directed (LD) chemistry is one of the few methods for targeted modification of endogenous proteins without genetic engineering. However, current LD strategies are limited by stringent amino acid selectivity. To bridge this gap, this thesis focuses on the development of highly reactive LD Triggerable Michael Acceptors (LD-TMAcs) …

Machine Learning Modeling Of Polymer Coating Formulations: Benchmark Of Feature Representation Schemes, Nelson I. Evbarunegbe

Masters Theses

Polymer coatings offer a wide range of benefits across various industries, playing a crucial role in product protection and extension of shelf life. However, formulating them can be a non-trivial task given the multitude of variables and factors involved in the production process, rendering it a complex, high-dimensional problem. To tackle this problem, machine learning (ML) has emerged as a promising tool, showing considerable potential in enhancing various polymer and chemistry-based applications, particularly those dealing with high dimensional complexities.

Our research aims to develop a physics-guided ML approach to facilitate the formulations of polymer coatings. As the first step, this …

Supramolecular And Covalent Crosslinking Of Organic Semiconductors, Audithya Narasimha Nyaychavadi

Electronic Theses and Dissertations

Organic semiconductors are a class of materials that are uniquely positioned to be the platform for next generation technologies that possess properties that transcend the limitations of silicon materials such as inherent biocompatibility, stretchability and degradability, all while being manufactured sustainably and at lower cost. These materials have good electronic properties that arise from their π-delocalized network, which when combined with rational chemical design allow for highly specialized materials for targeted applications and properties. Furthermore, their ability to be solution processed provides an avenue for low-cost, scalable mass production techniques, such as printing and roll-to-roll coating. Despite these advantages, however, …

Poly(Ionic Liquid)S For Magnetic, Ionic, And Electrical Stimuli-Responsive Applications, Kayla Ann Foley

Graduate Theses and Dissertations

Poly(ionic liquid)s (PILs) are a fascinating subclass of strong polyelectrolytes formed from polymerizable ionic liquids. As a result of their unique properties and counterion exchangeability, PILs can exhibit conformation structure or material property changes in response to external stimuli such as changes in pH/ionic environment, magnetic fields, and electric potentials. In Chapter 1, a comprehensive review of PILs design as well as their stimuli-responsive behavior is provided. Additional motivation for each dissertation chapter is also discussed. In Chapter 2, magnetically responsive PILs (MPILs) are developed from complexing paramagnetic salts with a random PIL copolymer containing a metal-coordinating co-monomer, acrylamide. A …

Redox-Active Polymerization Catalysts And Their Applications, Nicholas M. Shawver

Masters Theses

Traditional catalyst systems are reliable means to produce polymers with well-defined architectures and thermomechanical properties; however, they are often limited by a narrow monomer scope and their ability access few, if any, advanced polymer architectures. To address this limitation, a new class of catalysts have recently emerged that feature redox-active moieties that may access advanced architectures through catalyst electronic modulation that arises from redox events occurring on the ligand scaffold or at the active metal center itself. For example, researchers have explored the ability of redox-active catalysts to impart “on-off” kinetic control during ring-opening polymerizations and their ability to access …

Atom Economical Reactions Of Terpenoids And Post-Consumer Plastics With Sulfur, Charini Maladeniya

All Dissertations

The production of Ordinary Portland Cement (OPC) and its uses have a complicated environmental impact, which is influenced by infrastructure development and building operations as well as CO₂ emissions, which account for 7% of all worldwide CO₂ emissions. Due to the increasing population, production is still ongoing. The search for cement and construction materials produced with zero to low CO₂ emissions is therefore continuous. Finding recyclable, CO₂ gas-free biocomposites with high sulfur content that can rival the mechanical properties of popular building supplies like Portland cement is the primary objective of the research discussed in this …

Composite And Polymer Formulation Employing Sulfur And Bio-Olefin Feedstocks, Claudia V. Lopez

All Dissertations

Environmental sustainability represents a challenge for society since industrial growth has a direct impact on natural resources and waste production. New technologies that effectively incorporate waste into renewable resources are critical to the development of a sustainable and circular economy. The manufacturing of structural materials like Portland cement (OPC) is responsible for >8% of the global anthropogenic emissions of carbon dioxide, with ~ 1 kg of CO₂ released to the atmosphere for every kilogram of OPC produced. For instance, the development of sustainable structural materials is a key factor to reduce the greenhouse emissions and to attenuate the climate …