Materials Chemistry Commons^™

Synthesis Of Polyurethane Incorporated By Calcium Oxide And Magnesium Oxide For Heavy Metal Removal From Water, Fard Mohsen Vafaei

Student Works (2020-2029)

Water contaminated by heavy metals such as copper, lead, nickel, and cadmium has significant adverse impacts on receiving water. In recent years, various methods, such as adsorption, chemical precipitation, and ion exchange, have been extensively studied for the elimination of heavy metals. Adsorption is one of the numerously and diversely reported mechanisms of removing heavy metals due to its simplicity and costeffectiveness. In this study, highly permeable rigid polyurethanes (PU) incorporating calcium oxide (CaO) (PU/CaO) composite materials were prepared via a facile and economic one-pot synthesis method and characterized for remediation of heavy metal from water. To investigate the effect …

Elucidating Collagen Degradation Synergy Between Col G And Col H From Hathewaya (Clostridium) Histolytica And Identifying Novel Structural Features In Hpt And Rec Domains From Vars Histidine Kinase In V. Alginolyticus, Perry Caviness

Graduate Theses and Dissertations

In this research the mechanisms by which Hathewaya (Clostridia) histolytica collagenases are secreted and work together to degrade collagens are investigated. While H. histolytica collagenases Col G and Col H have similar multi-domain structures the difference in number of and orientation of the domains hint that the two target different regions in collagen. Study small angle x-ray scattering (SAXS) was used to give a low-resolution envelope of full-length Col G and Col H and Col G/Col H non-catalytic domains bound to a collagen-like peptide (mini-collagen). SAXS derived envelopes along with structural information was used to tease out the mechanisms by …

Understanding The Interfacial Reactions Initiating On Lithium Metal Surfaces In Next-Generation Battery Technologies, Joshua A. Lochala

Graduate Theses and Dissertations

Li-ion batteries have started to reach the theoretical maximum energy. Next-generation batteries represent the future of portable energy sources for vehicle electrification and grid energy storage. Li metal battery is one of the most promising next-generation battery technologies that could potentially double the cell-level energy of conventional Li-ion batteries. However, Li metal has multiple drawbacks that require addressing before realization. These drawbacks include dendrite formation leading to internal short and increasing internal resistance due to the breakdown of electrolyte, leading to rapid cell death. These problems stem from the interfacial reactions occurring during the plating and stripping of Li metal. …

Investigation Of The Structural, Electronic, And Thermoelectric Properties Of Mono- Chalcogenides, Aida Sheibani

Graduate Theses and Dissertations

The structural, electronic, and thermoelectric properties of GeTe are studied using density functional theory and Boltzmann transport equations. This material has a rhombohedral crystal structure in ambient temperature with a ferroelectric behavior due to lack of inversion symmetry. This study suggests that the presence of asymmetry in GeTe can lead to an improvement in the thermoelectric properties of this material. In addition, studies on introducing Group III, IV, and V dopants to GeSe show that while these impurities can improve the power factor and decrease the lattice thermal conductivity, they cannot enhance the figure of merit.

Ensemble And Single Particle Studies Of Cation Exchange In Cuins2/Zns Qds And Their Application In Super-Resolution Imaging, Anh Tue Nguyen

Graduate Theses and Dissertations

Colloidal quantum dots (QDs) have great potential in many applications such as bioimaging, light emitting diodes, solar cells and lasers. However, a great number of studies have been focused on Cd based (II-VI) and Pb (IV-VI) based materials which are not suitable for mass production. Therefore, alternative types of QD containing less toxic materials have been introduced, including CuInS2 QDs. This I-III-VI semiconductor nanocrystals also attract lots of attention due to their large Stock shift, long fluorescence lifetime and high defect tolerance, making them attractive emitters for applications in bioimaging, photovoltaics and light emitting diodes.

In the first project, we …

Preparations Of Nano-MnoX/Ti Electrocatalytic Membrane Electrode For Catalytic Oxidation Of Cyclohexane Using Intermittent Electrodeposition, Xue Zhou, Hong Wang, Zhen Yin, Yu-Jun Zhang, Jian-Xin Li

Journal of Electrochemistry

Cyclohexanone and cyclohexanol (KA oil) obtained from highly selective oxidation of cyclohexane (CHA) show important industrial value and application prospects. In this work, the intermittent electrodeposition was developed to prepare nano-MnO_x catalyst loading porous tubular titanium membrane electrode (MnO_x/Ti), which was employed to constitute an electro-catalytic membrane reactor (ECMR) for the oxidation of cyclohexane to produce cyclohexanol and cyclohexanone. The surface morphology, crystal structure and electrochemical property of the catalysts were characterized by FESEM, XRD and electrochemical workstation, respectively. The results show that the catalyst prepared by the intermittent electrodeposition displayed nano-flower-like γ-MnO₂. Compared with …

Preparation Of Α-Hydroxylated Acetal From 2-Butanone By Indirect Electrooxidation, Hai-Qing Huang, Ye Miao, Xin-Sheng Zhang

Journal of Electrochemistry

Acetoin (3-hydroxy-2-butanone) is an important food spice. As a platform compound, it is widely used in medicine, tobacco, cosmetics, chemical material and other industries. In this paper, α-hydroxylated acetal, an intermediate of acetoin, was prepared from 2-butanone by indirect electrooxidation in the plate and frame electrolytic cell, in which graphite plates were used as both an anode and a cathode, while KOH as an electrolyte and KI as a catalyst. Acetoin could be prepared by hydrolysis in acidic aqueous solution from acetoin intermediate. The effects of current density, electrolyte flow rate between the plates, 2-butanone concentration and electrolysis temperature …

Electrochemical Response Of A Single Wire-Electrode Ac Probe In 3.5wt.% Nacl, Zhen-Wen Zou, Da-Jiang Zheng, Zi-Ming Wang, Guang-Ling Song

Journal of Electrochemistry

In this paper, a recently developed single wire-electrode AC probe technology which does not need a reference or counter electrode was employed to investigate the electrochemical corrosion and sacrificial anode protection behaviors of steel and zinc in 3.5wt.% NaCl. With this simple, fast, reliable and stable probe, the instantaneous corrosion rate and accumulated corrosion loss of carbon steel in 3.5wt.% NaCl were measured, and the results revealed that both were greater than those of zinc. Furthermore, the observed different corrosion behaviors between carbon steel and zinc during the immersion could be caused by their different surface films. With the galvanic …

The Interaction Of Ternary Components Of Ionic Liquid Gel Polymer Electrolytes For Lithium Metal Batteries, Xiao-Na Pan, Li-Lai Liu, Zhi-Pu Wang, Dan Wang, Yun Li, Pei-Xia Yang, Jin-Qiu Zhang, Mao-Zhong An

Journal of Electrochemistry

Ionically conductive gel polymer electrolyte is an excellent candidate due to its inflammable, nonvolatile and high thermal stability as compared to commercial liquid electrolytes which are usually flammable, volatile, and containing toxic organic solution as solvent, The synthesis and application of ionic gel polymer electrolytes in lithium ion/metal batteries have been previously reported. However, the interaction effects of N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13TFSI) ionic liquid (as plasticizer) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) on PVDF-HFP polymer remain unclear. In this work, the molecular structure of ionic liquid gel polymer electrolyte (ILGPE) composed of PP13TFSI, LiTFSI and PVDF-HFP was studied by Raman spectroscopy and Fourier-transform …

Antimicrobial Strategies For Topical Applications, Kelsey Marie Lopez

LSU Doctoral Dissertations

Bacteria can thrive in diverse environments and are often harmless or beneficial. Bacteria in digestive tracts is one example of beneficial bacteria; however, bacteria can be harmful and when this type proliferates, it can cause infections within hosts. Bacterial infections are easily treated with antibiotics in most cases. However, bacteria are also capable of developing mutations which could cause them to become multi-drug resistant and eventually, “superbugs.” Therefore, the development of novel antimicrobial agents and materials capable of combating drug-resistant bacteria is necessary. Research presented in this dissertation focuses on different strategies for minimizing and preventing topical bacterial infections using …

Electrochemical Oxidation Of Metal Chromium In Odium Hydroxide Aqueous Solution, Ping Han, Hai-Tao Feng, Ya-Ping Dong, Sen Tian, Bo Zhang, Wu Li

Journal of Electrochemistry

Ferrochrome electrolysis technology is a novel method for preparing sodium chromate (Na₂CrO₄). Although the method performs well at soft reaction conditions, controllable process, environmentally friendly production process, etc., the electrochemical oxidation process of metal chromium in NaOH aqueous electrolyte is still unclear. At present, there are few research articles about specific electrochemical oxidation of metal chromium in NaOH aqueous electrolyte. It is, therefore, meaningful to carry out the research in electrochemical oxidation mechanism of chromium. The electrochemical oxidation of metal chromium in 0.01 mol·L^-1 ~ 10 mol·L^-1 NaOH aqueous electrolytes at 20 °C was …

Ordered Mesoporous Carbon/Graphene/Nickel Foam For Flexible Dopamine Detection With Ultrahigh Sensitivity And Selectivity, Lai-Yu Wang, Xin Xi, Dong-Qing Wu, Xiong-Yu Liu, Wei Ji, Rui-Li Liu

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO₂, which is one of the important techniques to solve the global environmental problems originated from excessive CO₂ emission. In this study, a membrane electrode assembly(MEA) type CO₂ electro-reduction electrolytic cell was constucted, which enables CO₂ feeding and real-time KHCO₃ aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO₃ concentration and updating inside the liquid electrolytic chamber on CO₂ electro-reduction activity, production distribution and stability were investigated. The experimental …

Poly(Ethylene Oxide) Based Polymer Electrolytes For All-Solid-State Li-S Batteries, Xue Li, Zheng-Liang Gong

Journal of Electrochemistry

In recent years, research on lithium-sulfur (Li-S) batteries has received much attention because the sulfur positive electrode and the lithium metal negative electrode produce a high theoretical specific capacity (lithium metal ~ 3800 mAh·g^-1, sulfur ~ 1675 mAh·g^-1). In addition, sulfur is considered to be the most promising cathode material for secondary lithium batteries, due to its advantages of low price and environmental friendly. However, the practical application of conventional liquid Li-S batteries is still obstructed by several critical issues, such as lithium ploysulfides shuttle effect, long-term stability of lithium metal anode with organic liquid electrolytes, …

Synthesis And Raman Study Of Hollow Core-Shell Ni1.2Co0.8P@N-C As An Anode Material For Sodium-Ion Batteries, Jia-Hui Chen, Xiao-Bin Zhong, Chao He, Xiao-Xiao Wang, Qing-Chi Xu, Jian-Feng Li

Journal of Electrochemistry

With the increasing demand for large-scale energy storage, great progress has been made in discovering new advanced energy storage materials. Sodium-ion batteries (SIBs) have attracted much attention in recent years due to their use of abundant sodium resources and their comparable electrochemical capacity to lithium-ion batteries (LIBs). In this paper, we developed novel hollow core-shell Ni-Co bimetallic phosphide nanocubes with N-doped carbon coatings (Ni_1.2Co_0.8P@N-C) as the anode material for SIBs. The material was synthesized through a low-temperature phosphorization method using resorcinol formaldehyde (RF) resin coating with a Ni-Co Prussian blue analogue (PBA) as a template and …

Stability Studies For A Membrane Electrode Assembly Type Co2 Electro-Reduction Electrolytic Cell, Qing Mao, Bing-Yu Li, Wei-Yun Jing, Jian Zhao, Song Liu, Yan-Qiang Huang, Zhao-Long Du

Journal of Electrochemistry

Electro-catalytic reduction is an efficient way to achieve resourcable transformation of CO₂, which is one of the important techniques to solve the global environmental problems originated from excessive CO₂ emission. In this study, a membrane electrode assembly(MEA) type CO₂ electro-reduction electrolytic cell was constucted, which enables CO₂ feeding and real-time KHCO₃ aqueous updating on both sides of the cathode gas diffusion electrode (GDE). By means of the electrolytic cell, effects of KHCO₃ concentration and updating inside the liquid electrolytic chamber on CO₂ electro-reduction activity, production distribution and stability were investigated. The experimental …

A Simple And Sensitive Aptamer-Based Electrochmical Sensor For Determination Of Aflatoxin B1, Bing Liu, Yao-Shuai Zhao, Yue Qin, Yi Wang, Yan-Jie Zhu, Shuo Wang

Journal of Electrochemistry

Aflatoxin B1 has attracted much attention because of its high toxicity and carcinogenicity, which has become a great concern in food safety. Based on the principle of specific binding between Aflatoxin B1 and its aptamer, an aptamer-based electrochemical sensor had been designed and developed for the determination of minor Aflatoxin B1 contained in grain. The mesoporous carbons were first modified on the surface of the working electrode, and then the gold nanoparticles were on-site electrodeposited at a constant potential. Each modified electrode was characteritised by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). As a result, the surface area …

Degradation Mechanism Of Lini0.83Co0.12Mn0.05O2 Cycled At 45 ℃, Hong-Yun Ma, Xiao-Hui Yao, Meng-Yao Miao, Yang Yi, Shao-Zhong Wu, Jiang Zhou

Journal of Electrochemistry

Nickel-rich layered material has been considered as the most promising one for lithium ion batteries due to its high specific capacity. To further improve the lifetime performance, it is significant to investigate the degradation mechanisms deeply. In this study, the degradation mechanism of NCM811 (LiNi_0.83Co_0.12Mn_0.05O₂) being cycled at 45^oC was systematically researched. Electrochemical impedance spectrum (EIS) results showed that the SEI resistance (R_SEI) and charge transfer resistance (R_ct) went up to 83.41% and 211.34% before and after the NCM811 material being cycled at 45^oC, …

Investigating Geochemical Processes Of Fluid-Rock Interactions On Materials Related To Energy And Environment, Zelong Zhang

LSU Doctoral Dissertations

Understanding the potential processes of radionuclides released from nuclear waste forms is essential to the safe disposal and containment of nuclear waste. Iodoapatite, a potential waste form for radioiodine, was chosen as a model system to examine the impact by common aqueous anions on iodine release processes. Four semi-dynamic leaching tests were performed using 0.1 mol/L NaCl, Na₂CO₃, Na₃PO₄, and Na₂SO₄ solutions respectively under 90 °C, 1 bar, fixed S/V ratio 5/m (sample surface area to solution volume), and with 24-hour replacement of the leaching solutions. Solution analysis and …

Benzosiloles With Crystallization-Induced Emission Enhancement Of Electrochemiluminescence: Synthesis, Electrochemistry, And Crystallography, Liuqing Yang, Donghyun Koo, Jackie Wu, Jonathan M. Wong, Tyler Day, Ruizhong Zhang, Harshana Kolongoda, Kehan Liu, Jian Wang, Zhifeng Ding, Brian Pagenkopf

Chemistry Publications

Crystallization-induced emission enhancement (CIEE) was demonstrated for the first time for electrochemilunimescence (ECL) with two new benzosiloles. Compared with their solution, the films of the two benzosiloles gave CIEE of 24 times and 16 times. The mechanism of the CIEE-ECL was examined by spooling ECL spectroscopy, X-ray crystal structure analysis, photoluminescence, and DFT calculation. This CIEE-ECL system is a complement to the well-established aggregation-induced emission enhancement (AIEE) systems. Unique intermolecular interactions are noted in the crystalline chromophore. The first heterogeneous ECL system is established for organic compounds with highly hydrophobic properties.

Altering An Epoxy-Amine Thermoset's Performance Through Varying Mix Ratios, Kiersten M. Smith

Master's Theses

Epoxy resins are used in a number of different industries and therefore have application-specific material requirements, from satellites that require materials that operate in space, to paints and coatings that require high scratch resistance and mechanical durability, to medical devices, designed to be in continuous contact with biological fluids. Commercial epoxy products come with manufacturer’s information explaining the epoxy properties and recommended preparation processing conditions, which may include epoxy resin to curing agent mix ratio (Part A : Part B), cure time, and cure temperature, for example. Due to proprietary reasons, it can be difficult to understand why these values …

Pitting Corrosion Of Oerlikon’S Abrasion Resistant Ferritic Stainless Steels, Matthew P. Nalty, Emma Wagstaff

Materials Engineering

Existing hardfacing coatings for hydraulic cylinders and brake disc applications crack during use leaving the components susceptible to corrosion. To address this problem, Oerlikon has designed three new alloys to be abrasion and corrosion resistant. This paper reviews the literature necessary to understand and quantify pitting resistance of stainless-steel alloys. It documents one round of testing ASTM G48 method A: Ferric Chloride Pitting Test of Stainless Steels on the new alloys P72-X9, P72-X13, P129-X9, as well as samples of 431, 316, and 2205 stainless steels. This paper also discusses improvements to the G48 testing method and industry use of the …

Synthesis And Characterization Of Porous Carbon Composite Derived From Biomass Waste For Supercapacitor Application, Cheng Kim Sim

Student Works (2020-2029)

Energy storage devices have gradually dominated human daily activities and indispensable to economy development such as supercapacitor and battery. There are few factors determining the performance of supercapacitor and active material is one of the crucial. Therefore, biomass such as pineapple peel (PP) and green waste (GW) were preferred and prior mixed with manganese and tin carbonate to synthesize carbon composite (PP/GW-ZMO and PP/GW-ZTO) via combustion. Brunauer–Emmett–Teller (BET) was employed to study the textural properties with the highest specific surface area obtained in PP-C (1765.92 m2g-1) and GW-C (1613.92 m2g-1). The existence of composite materials was examined using x-ray diffraction …

The Reduction, Sequestration, And/Or Coordination Of Technetium-99 Utilizing Polyoxometalates And Nanomaterials, Colleen Mb Gallagher

Dissertations, Theses, and Capstone Projects

Research into the sequestration of radionuclides from aqueous media is being conducted due to the contamination of aqueous waste effluents and groundwater with highly toxic long-lived radionuclides. These contaminants are introduced into water and streams from legacy nuclear sites, nuclear reactor operations, nuclear fuel reprocessing, nuclear weapons testing, and plutonium production. A major contributor (~6%) to the waste from thermal neutron fission of uranium-235 is the radionuclide technetium-99 (⁹⁹Tc). It is considered a long-lived radioisotope with a half-life of 2.1x10⁵ years. It is a weak beta emitter with a max energy of 0.29 MeV and is most …

I. Non-Degradable Polysiloxane Networks For Controlled Release Applications, And Ii. Additive Free, Degradable Silyl-Ether Furyl-Maleimide Networks, Caleb M. Bunton

Chemistry Theses and Dissertations

I. Two different series of non–degradable polysiloxane networks were prepared for the encapsulation and controlled release of a small molecule agent. For the first series, hydrosilylation was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and silylhydride functional poly(dimethyl)siloxanes. For the second series, the thiol-ene reaction was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and mercaptopropyl functional poly(dimethyl)siloxanes. Nile red dye was used as an encapsulated agent and dye release from each series of networks was measured using UV–vis spectroscopy to determine controllability …

Effect Of Post-Consumer Content And Bioplastic Incorporation On Polymeric Resin In Consumer Applications, Shelby Bicknell

Electronic Theses & Dissertations

Controversy surrounds the use of plastic products, primarily due to their potentially negative impact on the environment at the end of their lifecycle. The most widely used plastics are manufactured from petrochemicals such as petroleum, coal or natural gas. Petrochemical plastics are not able to readily breakdown in the environment, which aggravates the existing pollution problems. Fortunately, there are eco-friendly alternatives to petrochemical-based plastics. Bioplastics may be derived from renewable sources, biodegradable, or both. Bio-based plastics are plastics that may be derived from renewable biomass sources including, but not limited to, vegetable oils, cornstarch, straw, woodchips, and food waste. They …

Fabrication Of Polymer Monoliths Within The Confines Of Non-Transparent 3d-Printed Polymer Housings, Noor Abdulhussain, Suhas H. Nawada, Sinéad Currivan, Marta Passamonti, Peter J. Schoenmakers

Articles

In the last decade, 3D-printing has emerged as a promising enabling technology in the field of analytical chemistry. Fused-deposition modelling (FDM) is a popular, low-cost and widely accessible technique. In this study, RPLC separations are achieved by in-situ fabrication of porous polymer monoliths, directly within the 3D-printed channels. Thermal polymerization was employed for the fabrication of monolithic columns in optically non-transparent column housings, 3D-printed using two different polypropylene materials. Both acrylate-based and polystyrene-based monoliths were created. Two approaches were used for monolith fabrication, viz. (i) in standard polypropylene (PP) a two-step process was developed, with a radical initiated wall-modification step …

An Atomistic Study Of The Effects On Mechanical Properties And Bonding Interactions Of Carbon Nanofillers In Nylon 6 Nanocomposites, Michael Roth

Dissertations

Polymers have potential for a wide range of applications. The effectiveness of polymers can be further enhanced through the addition of nanofillers that improve thermal, mechanical, and electrical properties of the polymer. Carbon based nanofillers such as carbon nanotube (CNT), graphene, and carbon nanofibre (CNF) are of particular interest due to their high properties and high aspect ratios. However, limited understanding of the governing interactions of these nanofillers with polymers limits the effectiveness of the final nanocomposite.

The first facet of this dissertation focuses on determining the dominating interactions between pristine CNT and graphene with nylon 6 monomer and the …

Enhancement Of Phase Change Material Sorbitol By Nanoparticle Inclusion For Improving Thermal Energy Storage Capabilities, Joshua Kasitz

Mechanical Engineering Undergraduate Honors Theses

Thermal management of electronic devices has become an increasingly vital field of study with the rapid miniaturization of many key electrical components. With the significant improvement of semiconductor manufacturing and intensified focus on interconnects, electronic devices have decreased in size at an incredible rate. Decreasing spatial requirements is essential to improving device capabilities as the electronic system is able to incorporate more components. Currently, electronic systems are drastically limited by the capabilities of their cooling mechanisms. Smaller devices lead to large increases in the energy density of the system and require more powerful cooling systems to maintain proper component operating …

Enhancing Upconversion Nanoparticle Performance Of Nayf4: Yb,Tm With Doping Optimization And Shell Addition And Of Nayf4: Yb,Er With Yb,Nd Shell Addition, Ashleigh M. Chov

Honors Thesis

Upconversion (UC), is a phenomenon that occurs when low-energy excitation (usually near-infrared (NIR)) results in higher-energy emission. Upconversion nanoparticles (UCNPs) are particles less than 100 nm in size that are synthesized using rare earth metals such as Yb, Er, Tm, and Y. UCNPs have important applications in a variety of fields, including bio-imaging, security printing, and latent fingerprint development. Traditional methods for latent fingerprint development such as fluorescent powder dusting have several drawbacks including low contrast, high background interference, and autofluorescence. NIR-to-NIR UCNPs are composed of NaYF₄: Yb, Tm and emit 800 nm light under 980 nm excitation …

Mesoporous Adsorbents For Perfluorinated Compounds, Bertha Lotsi

Electronic Theses and Dissertations

Effective adsorbents for polyfluorinated compounds (PFCs) were successfully prepared. And they were tested in the adsorption of perfluorooctanoic and perfluorooctanesulfonic acids. Bridged silsesquioxanes containing secondary and tertiary amino groups were synthesized by sol-gel condensation of bis[3-(trimethoxysilyl)propyl]amine and bis[3-(methylamino)propyl]-trimethoxysilane in acidic media with surfactants. Obtained materials are mesoporous with a high BET surface area. They combine high structural stability with a high concentration of surface amino groups serving as adsorption sites. Batch adsorption tests demonstrated their extremely high adsorption capacity on PFCs: in some experiments, it reached up to 88% of the adsorbent weight. Adsorption of PFCs changed the surfaces of …