Materials Chemistry Commons^™

Unveiling Cuo-Doped Mwcnts Incorporated Polycaprolactone As Effective Photocatalytic Nanomembranes For Sequestrating Toxic Dyes From Industrial Wastewater And Antibacterial Applications, Hesham Moustafa, Mohamed Mousa, Mohamed Morsy, Gotdon Price, Mohamed H. Hemida, Samah A. Mohamed, Ahmed Helal

Nanotechnology Research Centre

Organic dyes, such as methylene blue (MB), are widely used in the textile and dyestuff industries, which can be released into the environment as major dye pollutants in wastewater, thereby causing serious environmental hazards. The present research aimed to synthesize effective CuO-doped multi-walled carbon nanotubes (MWCNTs) and incorporated into a renewable polycaprolactone (PCL) polymer at varied dosages (i.e., 3, 7, and 10 wt%) to fabricate photocatalytic nanomembranes for toxic dye sequestration. XRD, SEM and FTIR analysis were employed to characterize the structure, morphology and composition of prepared nanoparticles and PCL nanomembranes. The mechanical properties and antibacterial performance of prepared nanomembranes …

Synthesis, Thermal Stability, And Ionic Conductivity Of Phenyl-Extended Viologen Ditriflate Salts: Tailoring Properties Via Oxyethylene Chain Length, Seonghyeok L. Cox, Emily Moon, Si L. Chen, David King, Haesook Han, Pradip K. Bhowmik, Calvin Ng Yi Bin, Thamil Selvi Velayutham, Alfonso Martinez-Felipe

Chemistry and Biochemistry Faculty Research

Six new phenyl-extended viologen salts with oxyethylene groups paired with triflate anions (OTF) have been synthesized using anionic ring-opening and ring-closing reactions (ANRORC) and metathesis reactions with LiOTf salts. The salts, which contain terminal oxyethylene chains of varying lengths ((CH₂CH₂O)_n, n = 1, 2, 3, 4, 5, and 7), are named PEOn-OTF. These materials exhibit a fluorescence response and possess high thermal stability, with processing windows up to approximately 300 °C, as confirmed by thermogravimetric analysis. While samples with short chain lengths (n = 1, 2, and 3) undergo crystallization observed …

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Rheological Protocol To Assess And Optimize Latex Coagulation Dynamics For The Thin Glove Coagulant Dipping Process, Monday U. Okoronkwo, Kok Kong Ng, Wolfram Franke, Gaurav Sant

Chemical and Biochemical Engineering Faculty Research & Creative Works

Many products that directly impact the quality of human life today — gloves, catheters, condoms, and baby bottle teats — are made through the latex-dipping technology. While a variety of methods have been developed – e.g., particle counting, turbidimetry, microscopy, and light scattering – which are suitable for studying the coagulation of latex at very low concentrations, much less work has focused on methods suitable for in-situ characterization of latex coagulation in concentrated solutions (e.g., as relevant to the dipping process). This paper presents a process-relevant rheological protocol for assessing and optimizing latex coagulation dynamics for the thin glove coagulant …

Investigation Of Portland Limestone Cement Blended With Biochar From Downdraft Gasification: Hydration Kinetics, Microstructure, Rheology, And Performance Mechanisms, Ugochukwu Ewuzie, Paul C. Ani, Abdulkareem O. Yusuf, Joseph D. Smith, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

The widespread adoption of Portland Limestone Cement (PLC) in U.S. concrete production has necessitated research into commercially available supplementary cementitious materials (SCMs) for formulating high-performance, low-carbon blended binders with PLC. This study investigated the influence of biochar (BC) in biochar-PLC composites (CBCs), focusing on hydration kinetics, microstructure, rheology, pore-solution chemistry, compressive strength, and the underlying mechanisms. Biochar was produced via downdraft gasification at 850 °C and incorporated into PLC at 5, 7, and 10% substitution by mass. Isothermal calorimetry and hydration data modeled using the Knudsen equation revealed that BC retarded early hydration but improved hydration degree and later-age heat …

Intramolecular Nonbonding Interactions And Geared Phenyl Twisting In Para-Disubstituted 1,4-Diphenylazines: Electron Correlation Effects On Molecular Conformations And Enantiomerization, Kaidi Yang, Harmeet Bhoday, Rainer Glaser

Chemistry Faculty Research & Creative Works

The results are reported of potential energy surface (PES) analyses of six symmetrical azines Y_p − Ph − RC=N − N=CR − Ph − Y_p, namely, the benzaldehyde azines 1H, 2H, and 8H with R = H and the acetophenone azines 1M, 2M, and 8M with R = Me. The Y substituents Cl (1), Br (2), and Me (8) were studied because sets of polymorphs I (C2-symmetry, azine twist τ ≈ 135 ± 10°, disrotatory phenyl twists ϕi ≠ 0°) and II (Ci-symmetry, τ = 180°, conrotatory ϕi ≠ 0°) were crystallized for these three azines. The …

Hybrid Data-Driven Cement-Stabilized Soil Design: An Integration Of Machine Learning, Multi-Objective Optimization, And Life Cycle Assessment, Chikezie Chimere Onyekwena, Yunli Li, Ikenna J. Okeke, Ubani Obinna Uzodimma, Monday Uchenna Okoronkwo, Wenping Wu

Chemical and Biochemical Engineering Faculty Research & Creative Works

Soil stabilization is crucial in geotechnical engineering, yet conventional methods are often time-consuming, resource-intensive, and environmentally unsustainable. Despite growing interest in Machine Learning (ML) and optimization tools for mix design, few studies integrate these methods with decision-making techniques and environmental assessment to support practical implementation. This study proposes a hybrid data-driven framework for predicting strength, optimizing mix compositions, and evaluating environmental impacts via life cycle assessment of cement-stabilized soft soils. Six ML models were evaluated, and the top-performing eXtreme Gradient Boosting (XGB) model was further improved using the Grey Wolf Optimizer (GWO). The optimized XGB-GWO model, integrated with a polynomial …

Performance And Mechanistic Insights Into Cement Systems Modified With Wastewater-Recovered Struvite, Ugochukwu Ewuzie, Rupack R. Halder, Abdulkareem O. Yusuf, Abiodun A. Saka, Godwin I. Ogbuehi, Titus C. Egbosiuba, Damilola A. Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite, the stable hydration product and primary strength phase in magnesium ammonium phosphate cement (MAPC), derived from wastewater treatment, has recently been utilized as a sustainable additive to Portland cement (PC). However, its impacts on cement hydration kinetics, pore refinement, rheology, and the mechanisms underlying these processes have not been comprehensively studied. This study developed Portland cement-struvite (PCS) systems by replacing PC with 3–20 % struvite (ST wt.%: PCS3–PCS20) and evaluated these processes using isothermal calorimetry, 3D micro-computed tomography (μXCT), time-dependent rheometry, X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), and the Krstulović-Dabić (K-D) model. The FTIR/XRD confirmed the coexistence …

Synergistic V2ctₓ Mxene–Pani Hybrid With Expanded Interlayers For Ultrastable And High-Rate Pseudocapacitive Energy Storage, Amideddin Nouralishahi, Maryam Sharifi Paroushi, Mansour Razavi, Amarachi Clare Nnachor, Harish Singh, Manashi Nath

Chemistry Faculty Research & Creative Works

Recently, MXene-conducting polymer hybrids have emerged as promising electrode materials for sustainable energy storage applications, owing to their impressive electrochemical properties. Herein, we report the synthesis of vanadium carbide MXene nanoparticles (V2CT_x-MXene) using innovative Spark Plasma Sintering (SPS) technology followed by exfoliation steps. The V2CT_x nanoparticles were incorporated with PANI (MXene-PANI) by electrochemical polymerization of aniline monomers in the presence of V2CT_x nanolayers, to be used as a highly efficient material for charge storage application. PANI nanofibers form a conductive and porous architecture, which intercalates the V2CT_x nanoflakes. The resulting structure increases the interlayer spacing …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Raw Data For The Manuscript "Silicon-Stabilized Three-Dimensional Covalent Networks In High Entropy Diborides", Michael Yeung, Reza Mohammadi

Chemistry Department Faculty Scholarship

Abstract for data:

Raw data for the journal publication, Silicon-stabilized three-dimensional covalent networks in high entropy diborides. ReadMe file provided.

Abstract for Journal publication: 

High entropy ceramics offer a pathway to stabilize unconventional chemistries beyond traditional alloying rules. We report the incorporation of silicon into an AlB₂-type high entropy diboride, Cr_0.2Nb_0.2Si_0.2Ta_0.2Ti_0.2B₂, despite silicon violating classical Hume-Rothery rules for alloying. Arc melting produced a phase-pure, chemically homogeneous structure, as confirmed by powder X-ray diffraction (pXRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM–EDS). Silicon occupies …

Multidentate Surfactant-Dependent Synthesis Of Giant Iridium Superstructures, Ramjee Balasubramanian, Maeren E. Hill

Chemistry & Biochemistry Faculty Publications

Giant superstructures of iridium, comprised of smaller spherical and slightly larger anisotropic nanoparticles, were synthesized by reducing iridium chloride in the presence of resorcinarene, a class of tetrameric macrocyclic polyphenols, with sodium borohydride in ethanol in 30 min under mild conditions. These superstructures were characterized by a range of techniques including TEM, HRTEM, EDS and other spectroscopic methods. The impact of the macrocyclic surfactant, its features and reaction conditions in dictating the formation of giant iridium superstructures was evaluated. The packing density of nanoparticles in these giant iridium superstructures could be altered qualitatively by varying the duration of the reaction, …

Synergistic Doping And Coating Strategy For Boosting Na0.7mno2 Cathode Performance In Sodium-Ion Batteries, Ahmad Helaley, Han Yu, Manashi Nath, Xinhua Liang

Chemistry Faculty Research & Creative Works

Advancing sodium-ion battery (SIB) technology requires novel approaches to optimize cathode materials for improved electrochemical performance. In this study, we employ atomic layer deposition (ALD) to precisely modify the surface of P2-type Na_0.7MnO₂ cathodes with different coating materials including ZnO, NiO, and Al₂O₃, followed by post-annealing at 750°C for 10 hours. The strategic combination of ALD and thermal treatment can achieve thin film coating on particle surface and promote element doping into the near-surface lattice, as confirmed by electron energy loss spectroscopy (EELS) analysis. The incorporation of Zn, Al, and Ni results in …

Elucidating The Effects Of Water Activity On The Hydration Kinetics And Thermodynamics Of Ye’Elimite–Calcium Sulfate Hydrate Systems, Godwin I. Ogbuehi, Rupack R. Halder, Aditya Kumar, Gaurav Sant, Monday U. Okoronkwo

Materials Science and Engineering Faculty Research & Creative Works

Relative humidity and water activity (aH) reductions have been known to suppress the hydration of anhydrous cement clinker phases. However, the relationship between ye'elimite (C4A3$) hydration kinetics and water activity remain unclear. This study employs experimental and thermodynamic modeling approaches to investigate the influence of water activity on ye'elimite hydration in the "C4A3$ + water", and "C4A3$ + gypsum + water" systems. Experimental findings indicate that as water activity decreases, C4A3$ hydration diminishes until the reaction is brought to a halt at a threshold aH. The critical aHand corresponding solubility constant of C4A3$ (KC4A3S¯) estimated from thermodynamic analysis are 0.46 …

Revisiting The Spin–Lattice Relaxation Of Homonuclear In-Phase And Antiphase Nmr Magnetization, Lauren M. Kehoe, Zachary G. Mayes, Kelsey E. Brakensiek, Emma L. Ellis, Adam J. Alderfer, Lingyu Chi, Klaus Woelk

Chemistry Faculty Research & Creative Works

Hyperpolarization techniques such as dynamic nuclear polarization (DNP), chemically induced dynamic nuclear polarization (CIDNP), and parahydrogen-induced polarization (PHIP) enhance the sensitivity of NMR spectroscopy and MRI, but the associated antiphase magnetization patterns often relax faster than those of conventional in-phase signals. This study analyzes the spin–lattice relaxation matrix for single-quantum transitions in an isolated, weakly coupled two-spin AX system to identify eigenvectors and eigenvalues that govern the time evolution of in-phase and antiphase longitudinal magnetization. The analysis predicts that AX antiphase magnetization, such as that generated by PHIP hydrogenations in high magnetic field, can relax up to twice as fast …

Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

To understand the applicability of high-temperature preformed particle gel (HT-PPG) for control of short-circuiting in enhanced geothermal systems (EGSs), core flooding experiments were conducted on fractured granite cores under varying fracture widths, gel particle sizes and swelling ratios. Key parameters such as injection pressure, water breakthrough pressure, and residual resistance factor were measured to evaluate HT-PPG performance. The gel exhibited strong injectability, entering granite fractures at pressure gradients as low as 0.656 MPa/m; HT-PPG yields a superior sealing performance by significantly reducing the permeability; and dehydration occurs during HT-PPG propagation, with a dehydration ratio ranging from 4.71% to 11.36%. This …

Synergetic Adsorptive Mechanisms, Reusability And Cost Evaluations Of Green Fabricated Hybrid Barium Cobalt Nanocomposites For Methylene Blue And Lead Removal From Wastewater, Titus Chinedu Egbosiuba, Chibuike Christogonus Njoku, Ijeoma Jacinta Ani, Godwin Ifeanyi Ogbuehi, Abdulkareem Omeiza Yusuf, Abiodun Azeez Saka, Ugochukwu Ewuzie, Ebuka Emmanuel Ezennajiego, Blessing Onyinye Okafor, Walter Chibuike Anene, Cecilia Chika Unegbu, Florence Acha, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Barium nanoparticles (BaNPs), cobalt nanoparticles (CoNPs), and hybrid barium-cobalt nanocomposites (BaCoNCs) were synthesized using an eco-friendly green technique with Anacardium occidentale leaf extract for sequestration of methylene blue (MB) dye and lead (Pb (II)) ions from industrial wastewater. The nanoparticles and nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), and Brunauer-Emmett-Teller (BET) analysis to assess their functional groups, crystalline structure, morphology, and surface properties, confirming successful synthesis. Batch adsorption studies showed that optimal pollutant removal occurred at pH values of 8 for MB and 5 for Pb(II), with a contact time …

Mechanochemical Investigation Of The Solid-State Reduction Of Metal Oxide Species, Trevor Webster

Masters Theses & Specialist Projects

Redox reactions are commonly performed in aqueous solutions. Mechanochemistry offers an alternative route to conduct these reactions in the absence of a solvent. The current research project investigates the feasibility of performing solid-state redox reactions using mechanochemistry as a means to initiate. Utilizing a Wig-L-Bug, sodium metavanadate and vanadium(V) oxide are milled with various inorganic and organic reducing agents. Zn, Mg, Na₂SO₃, ascorbic acid, and benzoic acid were selected due to the agents’ high reduction potential and ability to reduce vanadium(V) species in acidic or basic solutions. The use of X-ray powder diffraction (XRD) and scanning …

Deposition Of Nickel/Iron Oxide Co-Catalysts Onto Titanium Dioxide Towards Water Photolysis, Md Towhidul Islam Tareqe

Masters Theses & Specialist Projects

Photocatalytic water splitting is one potential approach for sustainable hydrogen production, offering an environmentally friendly alternative to fossil fuels. This process typically employs metal–semiconductor hybrid systems, where the semiconductor absorbs sunlight to generate charge carriers, and the metal cocatalyst facilitates charge separation and surface redox reactions. Titanium dioxide (TiO₂) is a widely studied semiconductor due to its stability and abundance, but its limited absorption of the solar spectrum requires the incorporation of efficient cocatalysts. Platinum is regarded as the benchmark cocatalyst due to strong proton binding energy that easily facilitates the reduction of water to produce hydrogen gas. …

Investigating The Thixotropy Of Fresh Struvite Cement-Based Composite: Insights On Mechanisms Of The Pastes’ Thixotropic Behavior, Ugochukwu Ewuzie, Abdulkareem O. Yusuf, Damilola Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite (ST) recovered during wastewater treatment has been sparsely applied in cement-based composites. This study systematically evaluated the thixotropic behavior of cement-struvite (CST) pastes, a mix of 5–20 % ST by mass of cement, and proposed the interaction mechanisms leading to the pastes' thixotropy. The hysteresis loop area was used to establish the pastes' thixotropy and investigate its relationship with increased ST content, temperature, and yield stress. In the thixotropic behavior model used, the equilibrium shear stress was employed to examine the CST pastes' irreversible change; the characteristic time of deflocculation was used to study the flocs destruction process; and …

Colloidal Hot-Injection Synthesis Of Cubse2 Nanocrystals: Tetragonal Chalcogenide Templates For Superionic Lithiation Pathways, Yunhao Xu, Niket Powar, Kelly Zervos, Isabella Campbell, Simran Choudhary, Layan Al-Khaled, Progna Banerjee

Chemistry: Faculty Publications and Other Works

Copper boron selenides represent a previously unexplored class of materials with tetragonal structural symmetries and bonding chemistries potentially relevant to lithium-ion conduction. In this work, the first colloidal synthesis of nanocrystalline copper boron selenides is reported, enabling access to nanocrystals with reaction times shown as the synthetic knob to control composition and morphology. Copper boron selenide nanocrystals are synthetically designed as precursors for lithiation reactions aimed at probing structural evolution and ionic mobility pathways toward superionic conductors applicable as solid electrolytes in lithium-ion batteries. Postsynthetic lithiation studies under ambient conditions reveal a series of phase transformations and morphological changes, which …

2d Cuo/Rgo Nanocomposite: A Novel Architecture For Enhanced Cr(Vi) Photo-Reduction, Islam Gomaa, Nasser M. Hosny, Medhat A. Ibrahim

Nanotechnology Research Centre

he urgent need for efficient detoxification of carcinogenic hexavalent chromium (Cr(VI)) in aquatic environments has driven the development of advanced photocatalytic materials. This study presents the synthesis of 2D CuO/reduced graphene oxide (rGO) nanocomposite via probe sonication, designed to synergistically enhance the photocatalytic reduction of Cr(VI) to less toxic Cr(III). The nanocomposite was meticulously characterized using XRD, HRTEM, FESEM, XPS, and UV-Vis diffuse reflectance spectroscopy. Structural analysis confirmed the formation of CuO nanosheets (average size: 396 nm, thickness: 6 nm) integrated with rGO, where the rGO acted as an electron acceptor, mitigating charge recombination. XPS revealed Cu²⁺ in CuO and …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Electrochemically-Assisted Low Power Density Laser Writing On Stainless Steel Via Enrichment Of Chromium Oxides, Zechariah J. Pfaffenberger, Lianlian Liu, Tae Kyong John Kim, Vignesh Venkataramani, Lydia Kisley

Faculty Scholarship

Laser color marking produces nearly permanent, environmentally friendly, vibrant colors on surfaces. However, previous work has used high-power-density pulsed lasers to induce the physicochemical reactions for marking. Here, laser color marking on stainless steel 304 (SS304) is performed with a less expensive continuous wave (CW) laser and a power density five orders of magnitude below that previously reported by combining an electrochemical cell with a fluorescence microscope. Using a combination of optical microscopy, x-ray photoelectron spectroscopy, and bulk electrochemistry, it is demonstrated that the laser-induced luminescence and colors are due to enrichment (32 ± 9% increase) of Cr₂O₃ in the …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Nuclear Magnetic Resonance Dynamics Of Pyrazole-Litfsi Eutectic Solvents As Promising Electrolytes, Emilia Pelegano-Titmuss, Giselle De Araujo Lima E Souza, Muhammad Zulqarnain, Ramez Elgammal, Thomas Zawodzinski, Steven Greenbaum

Undergraduate Research

Deep Eutectic Solvents (DESs) have emerged as promising candidates to replace conventional organic solvents in various technological applications due to their low vapor pressure, non-flammability, and ease of preparation at low costs. In particular, Type IV DESs, which are composed of metal salts and hydrogen bond donors, are possible replacements for lithium-ion battery electrolytes due to their potential of having high lithium transference numbers. In this study, we investigated solvents of Pyrazole and LiTFSI at varying molar ratios using Fast Field Cycling (FFC) NMR Relaxometry. Notably, the 1:2 LiTFSI: Pyrazole sample shows distinct behavior, exhibiting enhanced relaxation rates for ^{1 …}

Modeling Degradation In Li-Ion Batteries: Analyzing Single-Cell Degradation And Applying It To Customized Pack-Level, Mohannad Y. Alkhalil

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The rapid expansion of lithium-ion (Li-ion) battery applications in areas such as electric vehicles (EVs), renewable energy storage, and portable electronics has drawn attention to the need for improving their performance, safety, and longevity. As Li-ion batteries become essential across technologies, understanding degradation mechanisms is critical for optimizing design and ensuring reliable operation. This work provides a detailed overview of modeling degradation in Li-ion batteries, focusing on single-cell behavior and its implications for pack-level performance.

The PyBaMM (Python Battery Mathematical Modeling) package, an open-source battery simulation tool written in Python, is used for single-cell simulations. Liionpack, another Python-based library, is …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …