Materials Chemistry Commons^™

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Development Of Methods For Predicting Second Harmonic Generation (Shg) Responses Of New Infrared Nonlinear Optical (Ir-Nlo) Materials, Katherine Colbaugh

Electronic Theses and Dissertations

Dissertation supervised by Dr. Jennifer A. Aitken.

In this work, calculations-based methods were evaluated for use in prediction of second harmonic generation (SHG), specifically χ⁽²⁾ values, of infrared nonlinear optical (IR-NLO) materials. Net dipole moment and dipole moment per volume were calculated by the bond valence sum method. Average F-index, proposed in this research, and group F-index, both representing induced dipole moment were also calculated. Each calculation was evaluated by comparing the results to single crystal and powder χ⁽²⁾ measurements of IR-NLO materials. The selected dataset consisted of ninety-six compounds including polar and nonpolar structures, newly discovered and …

Understanding Defect Dynamics In Black Phosphorene Under Noble Gas Ion Irradiation., Saransh Gupta

Electronic Theses and Dissertations

Controlled introduction of defects in phosphorene using high-energy ion beams offers a promising route to design novel high-performance materials for energy technologies. However, this potential remains underexplored due to a lack of fundamental understanding of the atomic-scale mechanisms governing the production, accumulation, and temporal evolution of defects during ion irradiation. Here, we employ a combination of classical and ab initio molecular dynamics simulations to elucidate the effects of ion energy, angle of incidence, noble gas ion size/mass, and fluence on (a) defect generation (i.e., point defects, topological imperfections, voids), (b) atomic-scale mechanisms of defect formation and re-arrangement, and (c) defect …

Nickel Electrocatalysts On Carbon Supports For The Hydrogen Evolution Reaction., Mohan Paudel

Electronic Theses and Dissertations

Hydrogen is an important energy storage alternative to fossil fuels due to its high energy density. Currently, most hydrogen is produced through petroleum feedstocks, which produce large amounts of carbon dioxide. However, a more eco-friendly method is the electrocatalytic splitting of water into hydrogen and oxygen. Efficient catalysts for the hydrogen evolution reaction (HER) are typically platinum group metals, which are rare and expensive. There is growing interest in developing HER electrocatalysts with earth-abundant metals for water electrolysis. Nickel, which lies in the same group in the periodic table as Pt and has similar chemical properties, is explored extensively for …

Magnetic Properties Of Zgnrs With Nitrogen And Fluorine Adsorbates, A Computational Study, Justin Petit

Electronic Theses and Dissertations

Imposing dimensional restrictions on graphene sheets and adding impurities can give rise to carbon nanostructures with magnetic properties. In this work, zigzag graphene nanoribbons, zGNRs, with nitrogen and fluorine adatoms are investigated for magnetic properties of interest for spin devices. Geometry optimizations were done determining which position along a zGNR electrode that N and F would favorably attach to. Edge positions were determined as the most stable attachment site. M-cell zGNR electrodes (M = 1-3) edge-functionalized by N and F adatoms were investigated with respect to their band structures and spin densities in antiferromagnetic and ferromagnetic, AFM and FM, configurations. …

Conversion Of Microcrystalline Cellulose To Hexane Using Hydrogenated Metal Oxides At Low Temperature And Pressure, Mubarak Osman

Electronic Theses and Dissertations

Increasing global energy demand and environmental concerns have fueled the exploration of sustainable and efficient methods for renewable fuel production. The conversion of cellulosic waste to hydrocarbon fuels using hydrogenated metal oxides presents a novel and eco-friendly approach to sustainably address energy demand. In this study, hydrogenated metal oxides were used as catalysts in a relatively low-temperature and atmospheric-pressure environment to facilitate the conversion of cellulosic waste into hydrocarbon fuels. Hydrogenated metal oxides have been introduced as potential hydrogen transfer catalysts. The expected result is the selective conversion of cellulose to hexane at relatively low temperatures, which significantly reduces energy …

Synthesis, Electrical Conductivity, Electrocatalytic Activity For Water Splitting, And Pseudocapacitive Properties Of Perovskite Oxide Derivatives., Kinithi Meththa Kumari Wickramaratne

Electronic Theses and Dissertations

Developing green and sustainable energy solutions is crucial to addressing the energy and environmental challenges. Hydrogen is an attractive candidate given its high energy density and low carbon emission compared to gasoline and coal. Electrochemical water splitting through a water electrolyzer is recognized as a green method for generating hydrogen and oxygen gases. Developing cost-effective electrocatalysts to reduce overpotential in hydrogen and oxygen generation is essential for the overall process. The growing interest in perovskite oxides as versatile and sustainable catalysts is driven by their compositional flexibility, tunable electronic structure, earth abundance, and inherent catalytic performance. In our research, we …

Scalable Solution Processing Of Niox Nanoparticles., Peter James Armstrong

Electronic Theses and Dissertations

Perovskite solar cells (PSCs) are a promising alternative to silicon-based photovoltaics. However, PSCs face several challenges due to shortcomings in their stability, module efficiency, and scaled production. Although PSCs is still a young field of research, significant attention has been given to demonstrating power conversion efficiencies that are on par with traditional silicon. With that target reached, converting the laboratory demonstration into practical materials to increase access and abundance of solar energy are among the next large targets for the field. This comes with material challenges for perovskite and their companion charge transport layers (CTLs). Among the charge transport materials …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Structural, Magnetic, Electrical, Pseudocapacitive, And Electrocatalytic Properties Of Bilayered Ruddlesden-Popper Oxides., Chandana Kananke-Gamage

Electronic Theses and Dissertations

Ruddlesden Popper (RP) oxides are perovskite-derived functional materials with the general formula An-1Aʹ2BnO3n+1, where A/Aʹ is often a lanthanide or alkaline earth metal, and B is usually a transition metal. These materials contain perovskite-like connectivity, where BO6 units share apexes to form layers that are stacked above each other. The number of layers in each stack is represented by n in the above formula. The spaces between stacks are often occupied by lanthanide or alkaline-earth metals (Aʹ-site metals), which also reside in intra-stack spaces (A-site) between the octahedra. Oxide materials derived from perovskites have been studied for a wide range …

Synthesis And Physicochemical Characterization Of Noncentrosymmetric Quaternary Sulfides With Potential Nonlinear Optical Applications, Andrew J. Craig

Electronic Theses and Dissertations

In this work, several new quaternary sulfides were synthesized and investigated for their potential applications in optics. Chapter 1 provides an overview of nonlinear optical (NLO) materials in general, including their applications, ideal characteristics, current deficiencies, and strategies for the discovery of new candidate NLO materials, particularly those for use in the infrared (IR). Two families of compounds are investigated in this work, including Ln₃LiTS₇ (3-1-1-7) compounds and I₄-II-IV₂-VI₇ (4-1-2-7) diamond-like semiconductors (DLSs). All products were synthesized via traditional high-temperature, solid-state synthesis and their structures were solved and refined through single crystal …

Biomaterials: From Scaffold Design To Implant Optimization, Jennifer Marie Armen

Electronic Theses and Dissertations

This work encompasses three individual projects concerning biomaterials and their modifications. Chemically-Induced Cross-Linking of Peptidic Fibrils for Scaffolding Polymeric Particles and Macrophages EAK16-II (EAK) is a self-assembling peptide (SAP) that forms β-sheets and βfibrils through ionic-complementary interactions at physiological ionic strengths. The soft materials can be injected in vivo, creating depots of drugs and cells for rendering pharmacological and biological actions. The scope of the applications of EAK is sought to extend to tissues through which the flow of extracellular fluid tends to be limited. In such anatomical locales the rate and extent of the fibrilization are limited insofar as …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

The Immobilization Of Ticagrelor On Implant Materials And Corrosion And Biofouling Inhibition By Novel Layered Polymer Thin Films For Marine Application, Tell Lovelace

Electronic Theses and Dissertations

Percutaneous coronary interventions are a widely used cardiovascular surgery which is typically accompanied by the insertion of a vascular stent. After the procedure patients are put on dual anti-platelet therapy (DAPT) to prevent stent thrombosis, a common complication to this procedure in which platelets aggregate in the blood vessel on the inserted stent. Systemic deactivation of platelets in patients via oral DAPT results in patients becoming bleeding risks in future medical procedures, necessitating the development of a localized delivery system for anti-platelet medications from the surface of the stent. A novel anti-thrombogenic vascular stent coating has been prepared by covalent …

Synthesis Of The Diazonium Zwitterionic Polymer/Monomer For Use As The Electrolyte In Polymer Electrolyte Membrane (Pem) Fuel Cells, Josiah Marshall

Electronic Theses and Dissertations

My research goals are to synthesize new zwitterionic perfluorosulfonimide (PFSI) monomer/polymers. They are expected to replace traditionally used perfluorosulfonic acid (PFSA) polymers as the electrolyte in PEM fuel cells. For the PFSI monomer preparation, we designed a nine-step synthesis route. Thus far, I have successfully completed the synthesis of 4- (2-bromotetrafluoroethoxy)-benzenesulfonyl amide, 4-acetoxybenzenesulfonic acid sodium salt, and 4-chlorosulfonyl phenyl acetate. The coupling reaction of 4-(2-bromotetrafluoroethoxy)- benzenesulfonyl amide with 4-chlorosulfonyl phenyl acetate, was troublesome due to slow reaction kinetics and byproducts. Additionally, I did a methodology study for the homopolymerziation of the perfluoro 3(oxapent-4-ene) sulfonyl fluoride monomer. We compared the weight …

Atom Transfer Radical Processes: From Catalyst Design To Polymer Synthesis, Characterization, And Application, Michael Novak

Electronic Theses and Dissertations

Due to the toxicity of heavy metals and their prevalence in the environment there exists a need to develop highly active transition metal catalysts ultimately reducing the amount needed for chemical transformations. Additionally, there is interest in the scientific community for creating new materials that can remove these pollutants from industrial wastewater prior to its release into the environment. The work presented here focuses on the reduction and removal of heavy metals from industrial hazardous waste by designing novel highly active catalysts and developing polymeric adsorbents.

Highly active catalyst complexes consisting of novel hybrid ligands, 2-(dimethylamino)ethyl-bis-[2-(pyridylmethyl)amine] (M1-T2), and bis[2-(dimethylamino)ethyl]-2-(pyridylmethyl)amine (M2-T1), …

Control Of Corrosion On Ss316l Using Surface Initiated Polymers, Alexander Rupprecht

Electronic Theses and Dissertations

Pitting corrosion is arguably one of the most destructive and dangerous forms of corrosion, resulting in damage to structures, the environment, and public health. In addition, damage caused to structures such as bridges, pipelines, and boats, corrosion also has a profound effect on the biomedical community. Implanted metallic devices (i.e., vascular stents and artificial joints) are prone to pitting corrosion caused by aggressive ions present in extracellular fluid. To provide a corrosion-resistant surface on SS316L, films of poly(styrene), poly(methyl acrylate), and poly(methyl methacrylate) were formed using surface-initiated atom transfer radical polymerization (SI-ATRP). The resulting hydrophobic polymer films had a fractional …

Design, Synthesis And Application Of Janus Gold Nanoprisms For Directed Self-Assembly., Md. Emtias Chowdhury

Electronic Theses and Dissertations

Colloidal Janus particles that possess more than one type of surface chemistry or functionalities have drawn significant interest due to their enormous potential in bottom-up synthetic strategies for complex superstructures. Moreover, the property of molecular recognition, tunability, and predictability of the DNA-mediated interactions enable a high degree of control over particle assembly to generate highly ordered nanostructures with emergent applications. In this dissertation, we present our works on the synthesis of Janus particles from anisotropic gold nanoprisms, and DNA- mediated assembly of nanoprisms and polymer beads in four major areas: 1) Facet selective asymmetric functionalization of gold nanoprisms for Janus …

Mesoporous Adsorbents For Perfluorinated Compounds, Bertha Lotsi

Electronic Theses and Dissertations

Effective adsorbents for polyfluorinated compounds (PFCs) were successfully prepared. And they were tested in the adsorption of perfluorooctanoic and perfluorooctanesulfonic acids. Bridged silsesquioxanes containing secondary and tertiary amino groups were synthesized by sol-gel condensation of bis[3-(trimethoxysilyl)propyl]amine and bis[3-(methylamino)propyl]-trimethoxysilane in acidic media with surfactants. Obtained materials are mesoporous with a high BET surface area. They combine high structural stability with a high concentration of surface amino groups serving as adsorption sites. Batch adsorption tests demonstrated their extremely high adsorption capacity on PFCs: in some experiments, it reached up to 88% of the adsorbent weight. Adsorption of PFCs changed the surfaces of …

Immobilization Of Phosphotungstic Acid On Silica Surface For Catalytic Alkylation Of Aromatic Compounds, Anastasia Kuvayskaya

Electronic Theses and Dissertations

Superacidic mesoporous materials containing covalently embedded PTA were synthesized by sol-gel method. Tetraethyl orthosilicate (TEOS) and phosphotungstic acid (PTA) were used as precursors in the synthesis, ionic and nonionic surfactants were used as pore-forming agents, the reaction proceeded in acidic media. TEM images revealed mesoporous structure with embedded PTA clusters. FT-IR spectra of obtained materials contained characteristic bands of PTA at 957 cm-1. Synthesized catalysts had high BET surface area and high concentration of acidic sites. Alkylation of 1,3,5-trimethylbenzene by 1-decene demonstrated high catalytic activity. The catalyst obtained with Pluronic P123 as a template was the most effective and resulted …

Preparation Of Folic Acid-Carbon Dots-Doxorubicin Nanoparticles As Targeting Tumor Theranostics, Samson Dada

Electronic Theses and Dissertations

Carbon dots (CDs) have attracted much attention as an excellent gene/drug delivery and biological imaging agent for early cancer theranostics. In this study, we prepared two series of nanoparticles (NPs), which are composed of (CDs) with a targeting agent, folic acid (FA), and a chemotherapeutic agent Doxorubicin (Dox). All the NPs and their intermediates were characterized using ultraviolet-visible spectroscopy (UV-vis), fluorescence spectroscopy, and Fourier transform-infrared spectroscopy (FT-IR). The drug loading capacity (DLC) and drug loading efficiency (DLE) of two series of FA-CDs-Dox were assessed using UV-vis absorption spectroscopy at the wavelength of 485 nm. Both showed good DLE and DLC …

Triple Functionalization Of Titanium Aluminum Vanadium For Orthopedic Implant Applications, Ashley Blystone

Electronic Theses and Dissertations

Orthopedic implant surgeries are on the rise in the United States, with well over a million surgeries performed annually. Common materials used for these applications include titanium and its alloy, titanium aluminum vanadium (Ti-6Al-4V). Ti-6Al-4V is chosen for this application due to its mechanical strength and corrosion resistance. However, Ti-6Al-4V does not support osseointegration and is susceptible to bacterial colonization. Therefore, these implants suffer from aseptic loosening and infection, necessitating removal and replacement. Revision surgery and treatment is financially burdensome and taxing on the patient. Current approaches focus on modifying the surface of Ti-6Al-4V through a variety of means to …

Synthesis, Characterization And Crystal Growth Of I2-Ii-Iv-Vi4 And I4-Ii-Iv2-Vi7 Diamond-Like Semiconductors With Potential In Ir-Nlo Applications, Jennifer Glenn

Electronic Theses and Dissertations

In this dissertation, several new and existing diamond-like semiconductors (DLSs) were synthesized and investigated for their potential in infrared nonlinear optical (IR-NLO) applications. In Chapter 2 growth of large single crystals of Li₂MnGeS₄ was carried out using iodine vapor transport and a newly created graphite-tube containment system. This crystallization method produced sizable single crystals on the scale of 2x1x1 mm³, that were used to determine the material’s magnetic properties. Magnetization data indicate that the compound is antiferromagnetic with a Néel temperature of 10 K and an effective magnetic moment of 5.6 /f.u.. The specific heat …

Development Of Granulated Adsorbent For Clean-Up Of Water Contaminated By Cesium, Esther Alorkpa

Electronic Theses and Dissertations

A study was conducted on sol-gel synthesis of an adsorbent (phosphotungstic acid embedded in silica gel, H-PTA/SiO­₂) of radioactive cesium. A novelty of this work is covalent bonding of PTA to the surface of solid support that prevents leaching from the surface of the material. The sample was granulated with a binder, aluminium oxide (γ-Al₂O₃). Solid-state NMR and FT-IR spectroscopy were used to confirm the presence of Keggin units of PTA in the bound materials. Thermal analysis of H-PTA/SiO­₂ - γ-Al₂O₃ (50 %) showed that the water content in the …

Lewis Base Promoted Annulations Of Allenoates With 1,4-Naphthoquinones, Nicole Marie Shoup

Electronic Theses and Dissertations

Lewis base promoted cyclization of allenoates with electron deficient olefins open up the possibility to generate more complex organic structures. By generating more complex molecules, we are able to produce new compounds for biomedical and material applications. Both phosphine and amine Lewis bases offer interesting annulations with allenoates resulting in Lu or Morita–Baylis–Hillman type reactions. Once the Lewis base engages with the allenoate there can be several modes of nucleophilic reactivity that allows for the allenic ester to act as a two or three carbon synthon. The allenoate can then react with varying electron deficient olefins generating more complex molecules …

Electrochemical And Morphological Properties Of Chloride-Doped Lithium Argyrodite Solid Electrolytes., William Richard Arnold

Electronic Theses and Dissertations

Recently, much attention has been devoted to the development of solid electrolytes to be used in all-solid-state-batteries. One group of promising solid electrolyte (SE) materials are lithium argyrodites, a class of superconductors which are noted for their high ionic conductivities. In particular, halogen doping has been shown to increase both conductivity and stability. The majority of research has focused on material synthesis through solid state reactions, but a novel liquid synthesis method for the preparation of Cl-doped Li7PS6 solid electrolyte provides the advantages of a homogenous product and a rapid, economic synthesis. Here this thesis focuses on the liquid synthesis …

Long-Range Electrostatic Interactions In Gold Catalysis And Fluorinating Reagent Development., Zhichao Lu

Electronic Theses and Dissertations

Our research focus is on applying two long range electrostatic interactions--coulombic interaction between ion pairs and hydrogen bonding—to two tasks: exploring counterion effects in gold catalysis and utilizing hydrogen bonding for fluorinating reagent development. Cationic gold catalysis is considered one of the most important breakthroughs in organic synthesis over the past two decades. A wealth of empirical information on counterion effects is now available regarding homogeneous gold catalysis. However, the rational understanding of the counterion effect on reactivity is still elusive. We proposed a widely applicable model to rationalize the kinetic effect in gold catalyzed reaction. We first solved the …

Lignin Depolymerization: Mechanistic Analysis, Optimization And Application, Eric Michael Nagel

Electronic Theses and Dissertations

Lignin is the most abundant aromatic biopolymer and is a potential source for phenolic chemical feedstocks. Lignin is composed of phenolic units connected by more than eight different linkages, the most common being β-O-4 which constitutes 50-60%. The hydrothermal decomposition of a guaiacol based β-O-4 lignin dimer was studied under neutral and basic conditions to elucidate the mechanism of β-O-4 bond cleavage and the formation of downstream products. Phenol-carbonyl condensation and vinyl-ether formation were shown to be the primary causes for low monomer yields under the tested conditions. Three Ni catalyst systems, Ni/C + H₂, Ni/C-Zn, and Ni/Zn, …

Artificial Olfactory System For Multi-Component Analysis Of Gas Mixtures., Alexander Aleksandrovich Larin

Electronic Theses and Dissertations

Gas analysis is an important part of our world and gas sensing technology is becoming more essential for various aspects of our life. A novel approach for gas mixture analysis by using portable gas chromatography in combination with an array of highly integrated and selective metal oxide (MOX) sensors has been studied. We developed a system with small size (7 x 13 x 16 inches), low power consumption (~10 W) and absence of special carrier gases designed for portable field analysis (assuming apriori calibration). Low ppb and even sub-ppb level of detection for some VOCs was achieved during the analysis …

Transient Absorption Studies Of Cdse Nanocluster Passivated With Phenyldithiocarbamate Ligands., Yizhou Xie

Electronic Theses and Dissertations

Semiconductor nanocluster (SCNC) research is a rapidly growing field driven by the promising fact that properties of such materials can be tailored by modifying their size, shape, and structure. Combination of nanocluster and organic ligands provides even wider possibilities of design and development of effective and task-specific nanostructures. Understanding of and, eventually, control of energetics, interfacial interaction, and photoinduced processes in such highly heterogeneous structures is critical to invention of novel materials including those in photovoltaic devices. In the newly established Ultrafast Laser Facility (ULF), transient absorption pump-probe spectroscopy (TAPPS) has been employed to investigate the electron transfer (ET) and …