Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1021 - 1050 of 3619

Full-Text Articles in Materials Chemistry

The Synthesis Of Urethane Acrylate Resin From Palm Fatty Acid Distillate And Some Mechanical Properties, Kim Teck Teo May 2020

The Synthesis Of Urethane Acrylate Resin From Palm Fatty Acid Distillate And Some Mechanical Properties, Kim Teck Teo

Student Works (2020-2029)

Depletion of petroleum reserves and increasing environmental concerns have stimulated the efforts to explore materials from readily available, renewable natural resources, such as carbohydrates, oils, fats and proteins. Plant oil and its fatty acids are promising renewable resources to produce environmentally friendly polymeric materials. Palm oil is a major crop in Malaysia and consequently palm fatty acid distillate (PFAD) has been an abundant by-product during the refinery process. PFAD could be a renewable raw material for industrial application. Thus, we develop new PFAD-based acrylate resins UV curable for coatings applications. The resins could be produced by two approaches. Firstly, mixtures …

Go to article

Immobilization Of Phosphotungstic Acid On Silica Surface For Catalytic Alkylation Of Aromatic Compounds, Anastasia Kuvayskaya May 2020

Immobilization Of Phosphotungstic Acid On Silica Surface For Catalytic Alkylation Of Aromatic Compounds, Anastasia Kuvayskaya

Electronic Theses and Dissertations

Superacidic mesoporous materials containing covalently embedded PTA were synthesized by sol-gel method. Tetraethyl orthosilicate (TEOS) and phosphotungstic acid (PTA) were used as precursors in the synthesis, ionic and nonionic surfactants were used as pore-forming agents, the reaction proceeded in acidic media. TEM images revealed mesoporous structure with embedded PTA clusters. FT-IR spectra of obtained materials contained characteristic bands of PTA at 957 cm-1. Synthesized catalysts had high BET surface area and high concentration of acidic sites. Alkylation of 1,3,5-trimethylbenzene by 1-decene demonstrated high catalytic activity. The catalyst obtained with Pluronic P123 as a template was the most effective and resulted …

Go to article

Surface Chemistry And Surface Properties Of Energetic Nitrocellulose (Nc), Henry Grau Apr 2020

Surface Chemistry And Surface Properties Of Energetic Nitrocellulose (Nc), Henry Grau

Seton Hall University Dissertations and Theses (ETDs)

This research describes an investigation into the wettability of nitrocellulose (NC), most importantly to nitroglycerin (NG), which are key components of formulations used to propel military ammunition. NG demonstrates complete wetting of NC and, overtime, NG sweats on the NC surface and leaks out. The leaking out of NG from the solid formulation is a known cause of fires and explosions resulting from storage. The origin of this research is inspired by the need to engineer a solution to leakage problems of energetic plasticizer in NC based propellant. While searching for a viable material for a specific application, we journeyed …

Go to article

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng Apr 2020

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng

Journal of Electrochemistry

The tantalum ion (Ta 5+) doped garnet-type inorganic solid electrolyte Ta-LLZO was prepared by solid state reaction, and the effect of doping amount on the properties of the materials was investigated. The materials were characterized by X-ray diffraction (XRD), field emission electron scanning microscopy (FESEM) and electrochemical impedance spectroscopy (EIS). And the cycle stability was tested by assembly of LiFePO4//LLZTO//Li all solid lithium battery. The results show that with the increase of Ta 5+ doping amount, the material appeared to form a single cubic phase structure. When the Ta 5+ doping content became 14.09wt.%, x=0.3, the …

Go to article

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang Apr 2020

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang

Journal of Electrochemistry

A site deficient (La0.8Sr0.2)0.95MnO3 (LSM95) powder was synthesized by solid state reaction as a cathode material. The commercial Zr0.9Sc0.1SO1.95 (SSZ) was selected as an electrolyte material and La0.8Sr0.2Cr0.5Mn0.5O3- (LSCrM) was synthesized by sol-gel method as an anode material. Accordingly, single cells of LSCrM-CeO2|SSZ|3YSZ-LSM95 were prepared by tape casting, sintering and impregnation. The single cell test results for LSCrM-CeO2|SSZ|3YSZ-LSM95 with 0.11 g·cm -2 CeO2 and using CH4 as a fuel showed the power …

Go to article

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie Apr 2020

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie

Journal of Electrochemistry

Solid oxide electrolysers are now attracting much more attentions because they can efficiently produce fuels by electrolyzing H2O/CO2. In this paper, a comprehensive introduction to the recent progress in the development of fuel electrode (cathode) materials is provided. The advantages, disadvantages and development trend towards various cathode materials are pointed out. The key scientific and technological problems in this field are emphasized.

Go to article

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu Apr 2020

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a generating device by electrochemical reaction to transfer the chemical energy of fossil fuels (coal, oil and gas, etc.), the biomass fuel or other hydrocarbon fuels directly into electricity with higher energy conversion efficiency and lower pollution, which is recognized to be efficient green energy technology in the 21st century. However, when hydrocarbons are directly used as fuel, carbon deposition is easy to occur in nickel-based anode, thus, losing electrochemical catalytic activity. Fuel pre-reforming on the outside of the anode is an effective solution, which strongly relies on highly efficient and stable reforming catalysts. …

Go to article

Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang Apr 2020

Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang

Journal of Electrochemistry

Garnet-type solid electrolyte is a newly developed Li ion conductor and promising in the application of all-solid-state batteries. However, Garnet is incompatible with Li anode, which restricts the application of Garnet-type solid batteries. In order to improve the contact between Garnet-type solid electrolyte and Li electrode, a composite anode which contains Al-Li alloy (Al4Li9) was prepared as an electrode. Al-Li alloy has many advantages such as easy preparation, low cost, simple post-treatment and high capacity. Garnet-type Li6.5La3Zr1.75W0.25O12 (LLZWO) was synthesized via solid-state reaction. Garnet solid electrolyte has …

Go to article

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan Apr 2020

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan

Journal of Electrochemistry

Carbon is richly reserved in coal, biomasses, and many other nature resources. It is usually used as an energy source through oxygen oxidation reaction. The oxidation is generally realized through combustion which causes serious air pollution. Besides, the conversion efficiency of generating electricity through the combustion process is limited by Carnot efficiency. A direct carbon solid oxide fuel cell (DC-SOFC) is a solid oxide fuel cell (SOFC) directly operated with solid carbon as the fuel. It can convert the chemical energy of carbon into electricity with high efficiency. The concentration of produced CO2 from a DC-SOFC is so high …

Go to article

Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu Apr 2020

Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu

Journal of Electrochemistry

Increasing supplies of methane/shale gas have promoted global development of higher value chemicals such as ethylene production by ethane, which dramatically changes the markets of petrochemical industry. Clean and efficient transformation of ethane into higher value chemicals has far-reaching significance. Ethylene production through ethane steam cracking is a relatively matured technology for industrial production. However, the process consumes large amounts of energy and the presence of carbon deposition becomes a serious problem which is difficult to be solved. The cogenerated energy-chemicals solid oxide fuel cells have been widely studied because fuel gas can be converted into high-value chemicals via spontaneous …

Go to article

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu Apr 2020

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu

Journal of Electrochemistry

Solid oxide electrolysis cell is an advanced energy conversion device with high efficiency, simplicity, flexibility, and environmental friendliness. It is currently a research hotspot in the international energy field. This paper introduces and analyzes the basic principles, key materials, system components and developments of solid oxidation electrolysis cells. Furthermore, the recent research progresses, challenges and future development directions in solid oxidation electrolysis cells in the field of high-efficiency hydrogen production are summarized and outlined.

Go to article

Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian Apr 2020

Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian

Journal of Electrochemistry

Single-chamber solid oxide fuel cell (SC-SOFC) is a special type of fuel cells, in which both an anode and a cathode are placed in one chamber. Its working principle relies on the selective catalytic activity of the electrodes towards fuel and oxidant in a gas mixture, leading to the generation of an electromotive force. Because of its unique principle and structure, SC-SOFC has many advantages such as sealing-free, easy stacking, quick start-up and no carbon deposition, thus, it possesses large potential in application. Herein, the principles and characteristics of SC-SOFC are introduced. Furthermore, the SC-SOFC materials, micro-stack design, degeneration mechanisms …

Go to article

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia Apr 2020

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia

Journal of Electrochemistry

Solid oxide electrolysis cells (SOECs) have stimulated wide interests for their promising application in the reduction of CO2 emissions and the storage of renewable energy. Here, the advances made in the development of cathode materials including cermets and perovskite oxides in our research group, are summarized, along with the design of cell configurations. The electrochemical kinetics and performances of cathodes and cells are discussed and analyzed. It is expected that this brief review offers critical insights and useful guidelines for developing superior electrodes and SOECs in the future.

Go to article

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen Apr 2020

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen

Journal of Electrochemistry

Cathode material Li2MnO3 has received more and more attention owing to its high theoretical capacity (459 mAh·g -1). However, the low initial coulombic efficiency and the poor cycle stability hamper its practical application in lithium-ion batteries. Herein, we investigated the crystal structure and electrochemical performance of Li2MnO3 by introducing MgF2 coating layer. The results indicated that the conversion of partial layer Li2MnO3 to spinel phase induced by MgF2 coating could reduce the initial irreversible capacity and improve the first cycle efficiency. The initial coulombic efficiencies of the 0.5wt.%, …

Go to article

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan Apr 2020

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan

Journal of Electrochemistry

For pervasive applications of fuel cells, highly efficient and economical materials are required to replace Pt-based catalysts for oxygen reduction reaction (ORR). In this study, the NiO@rGO, Pd-NiO@rGO and Ag-NiO@rGO nanoparticles were synthesized, and their catalytic performances toward ORR were investigated. The results revealed that all the three materials were capable of catalyzing ORR, but both the Pd-NiO@rGO and Ag-NiO@rGO showed the better performances compared with the NiO@rGO in terms of the reaction pathway being 4-electron process, the increases of the onset potential and the intermediate yielding rate, as well as the extended stability. Moreover, the effect of Pd modification …

Go to article

Battery Application Of Silver Molybdate Materials, Brendan Michael Godsel Apr 2020

Battery Application Of Silver Molybdate Materials, Brendan Michael Godsel

Undergraduate Honors Papers

As the demand for renewable energy grows, the investigation of potential battery materials continues to progress hastily. Many devices and machines of present day are operated by battery technology, and their energy requirements warrant which kinds of batteries will power them. The battery in a phone requires hundreds, possibly thousands, of uses and needs to be able to recharge quickly. The battery in the implantable cardiac defibrillator (ICD), the battery by which this product was inspired, is only used once, but it must last years before it is replaced. The cathode of the ICD battery is comprised of a silver …

Go to article

Crystallization At Droplet Interfaces For The Fabrication Of Geometrically Programmed Synthetic Magnetosomes, Matthew Gromowsky, Michael Stoller, Maddee Rauhauser, Marcus Judah, Abhiteja Konda, Christopher Jurich, Stephen Morin Apr 2020

Crystallization At Droplet Interfaces For The Fabrication Of Geometrically Programmed Synthetic Magnetosomes, Matthew Gromowsky, Michael Stoller, Maddee Rauhauser, Marcus Judah, Abhiteja Konda, Christopher Jurich, Stephen Morin

UCARE: Research Products

Many organisms rely on the precise growth, assembly, and/or organization of inorganic crystals to achieve vital functions, for example, three-dimensional structural support (i.e., skeletal systems based on calcite) or environmental sensing (i.e., magnetosomes based on magnetite). Mimicking the production of the complex products observed in these biomineralization processes, synthetically, remains challenging. Herein, a method for the synthesis of artificial magnetosomes with programmable magnetic domains was developed. Specifically, precursors were compartmentalized inside different surfactant-stabilized aqueous-phase droplets suspended in oil and microfluidic technologies were implemented to control their interactions precisely. When reactive droplets were brought into contact with one another, a lipid …

Go to article

Using Surface-Enhanced Raman Scattering Of Gold Nanostars For Encoding Molecular Information, Samantha E. Curry Apr 2020

Using Surface-Enhanced Raman Scattering Of Gold Nanostars For Encoding Molecular Information, Samantha E. Curry

Honors Thesis

Increases in the selling of illicit goods warrant a subsequent need for even more sophisticated methods to prevent counterfeit products from being sold. Surface-enhanced Raman spectroscopy (SERS) has the potential to be a powerful tool to thwart counterfeiters because the unique security tags fabricated with this method are difficult to reproduce without knowing the “secret” recipes used in their preparation. In this work, gold nanostars are used as SERS active substrates since their branched structure allows for strong coupling between the light and plasmonic nanoparticles. As a result, Raman signals of trace amount of chemicals can be easily detected. The …

Go to article

Regenerative Electroless Etching (U.S. Patent), Kurt W. Kolasinski, Jarno Salonen, Ermei Makila Mar 2020

Regenerative Electroless Etching (U.S. Patent), Kurt W. Kolasinski, Jarno Salonen, Ermei Makila

Chemistry Faculty Publications

A regenerative electroless etching process produces nanostructured semiconductors in which an oxidant (Ox 1 ) is used as a catalytic agent to facilitate reaction between a semiconductor and a second oxidant (Ox2) that would be unreactive (or slowly reactive compared to Ox 1 ) in the primary reaction. Ox2 is used to regenerate Ox1 , which can initiate etching by injecting holes into the semiconductor valence band. The extent of reaction is controlled by the amount of Ox2 added; the reaction rate, by the injection rate of Ox2 . This general strategy is demonstrated specifically to produce highly luminescent nanocrystalline …

Go to article

Synthesis And Fabrication Of Trimetallic (Ru-Mn Co) Catalyst Supported On Tio2 And Ni(Oh)2 Thin Films For Photoelectrochemical Applications, Che Mat Ahmad Nazeer Mar 2020

Synthesis And Fabrication Of Trimetallic (Ru-Mn Co) Catalyst Supported On Tio2 And Ni(Oh)2 Thin Films For Photoelectrochemical Applications, Che Mat Ahmad Nazeer

Student Works (2020-2029)

Anatase supported heterogeneous photocatalyst consisting of RuO2, MnO2 and Co3O4 (1:13:13 ratio) was synthesized by precipitation method. The film of the prepared catalyst was fabricated by electrophoretic deposition technique in an aqueous solution of 0.1 mM ammonia and tested for photoelectrocatalytic (PEC) oxidation of methanol in 0.1M KOH under visible light irradiation. The as-prepared photocatalyst was characterized by FTIR, UV–Vis, XRD, Raman spectroscopy, FESEM/EDX, TEM, BET, XPS and TPR. The PEC study by cyclic voltammetry indicates that the oxidation of methanol to CO2 and H2O upon exposure to visible light occurs between 400 and 800 nm. The smaller value of …

Go to article

Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen Feb 2020

Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen

Journal of Electrochemistry

Positive material Li2MnO3 shows the highest ratio of lithium to manganese among lithium-rich materials and exhibites the theoretical capacity up to 458 mAh·g-1, making it one of the most promising cathode materials. However, this material has the intrinsic low electrical conductivity and poor cycle stability. In this paper, Li2MnO3, the lithium-rich positive material, was prepared by sol-gel method using acetate as raw material and citric acid as a complexing agent. By using SnC2O4 as a tin source, Sn4+ instead of Mn4+ was introduced to obtain the …

Go to article

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen Feb 2020

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen

Journal of Electrochemistry

In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO2 from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO2 reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …

Go to article

Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang Feb 2020

Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang

Journal of Electrochemistry

Carbon layers with different thicknesses were introduced into the surfaces of silicon (Si) nanoparticles by sol-gel method using poly (cyclotriphosphazene-co-4, 4'-sulfonyldiphenol) as the carbon source. Technologies of X-ray diffraction, thermo-gravimetric analysis, Brunauer-Emmett-Teller and transmission electron microscopy were employed to analyze the structures and components of the as-prepared Si@CPZS composites. Electrochemical performance of Si@CPZS with different carbon thicknesses was studied. The results showed that Si@CPZS with carbon thickness of 10 nm possessed the best performance. Its capacity remained 940 mAh·g-1 after 290 cycles under 500 mA·g-1. As the addictive, the graphite-based anode contained 30% of …

Go to article

In-Situ Raman Spectroscopic Study Of Electrochemical Reactions At Single Crystal Surfaces, Min Su, Jin-Chao Dong, Jian-Feng Li Feb 2020

In-Situ Raman Spectroscopic Study Of Electrochemical Reactions At Single Crystal Surfaces, Min Su, Jin-Chao Dong, Jian-Feng Li

Journal of Electrochemistry

Since the 1970s, in-situ spectroscopy (Raman, infrared, etc.) has been used to systematically study the electrochemical interfacial reactions which can provide more information about surface reactions and reveal the mechanisms from microscopic view due to its excellent surface sensitivity and energy resolution. With the development of nano-technology, surface-enhanced Raman scattering effect spectroscopy has made rapid progress. Recently, the emergence of SHINERS provides a good in-situ spectroscopic technique for the study of catalytic reactions on single crystal model electrodes with deterministic surface structure. In this paper, we have summarized the application of SHINERS in the study of …

Go to article

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li Feb 2020

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li

Journal of Electrochemistry

The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni2+ to Fe3+ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …

Go to article

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen Feb 2020

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen

Journal of Electrochemistry

In recent years, the rapid growing in the electric vehicle market has raised higher requirement on the lithium-ion batteries (LIBs) performance towards energy density and safety. However, considering the successful development of LIBs techniques in the past 30 years, there is little room left for improving the LIBs performance on the aspects related to the electrode materials, battery structure design and production processes. It is important to pursue more comprehensive fundamental understanding in the entire system and working principle of LIBs. Solid electrolyte interphase (SEI), existing between the electrode material and the electrolyte, has been proved to be an important …

Go to article

Electrochemical Impedance Spectroscopy For Electrocatalytic Interfaces And Reactions: Classics Never Die, Jun Huang Feb 2020

Electrochemical Impedance Spectroscopy For Electrocatalytic Interfaces And Reactions: Classics Never Die, Jun Huang

Journal of Electrochemistry

This review article recapitulates electrochemical impedance spectroscopy (EIS) studies in the field of electrocatalysis. The history of this specialized field, ranging from the beginning of the twentieth century to now, is outlined. We then chronicle milestones of the impedance theory. Special emphases are put on the Dolin-Ershler model, the prevailing model for analyzing adsorption impedance data. Afterwards, we narrow into a very specific and fundamental topic, the double-layer capacitance at platinum (Pt) single crystals. We discuss the challenges in experimentation and theoretical understanding thereof. We cast doubts into the validity of using the Dolin-Ershler model to obtain the double-layer capacitance …

Go to article

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun Feb 2020

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun

Journal of Electrochemistry

The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …

Go to article

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng Feb 2020

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng

Journal of Electrochemistry

Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …

Go to article

Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang Feb 2020

Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

Nickel-rich ternary materials with large reversible capacity as well as high operating voltage are considered as the most promising candidate for next generation lithium-ion batteries (LIBs). However, the inferior cycle stability and thermal stability have limited their widely commercial applications. Concentration gradient design of Ni-Co-Mn/Al ternary concentration gradient materials have been extensively studied in the past decade, which can ensure high cycle capacity while maintaining excellent cycle stability. In this paper, the latest research progresses in Ni-Co-Mn/Al ternary concentration gradient materials for LIBs are reviewed. Firstly, we summarize the different synthesis methods of ternary concentration-gradient materials, especially focusing on the …

Go to article

First Prev Next Last