Materials Chemistry Commons^™

Explorations Of Dna-Single-Walled Carbon Nanotube Interactions To Develop Multiplexed Molecularly Specific Biosensors For Inflammation, Amelia K. Ryan

Dissertations and Theses

Inflammatory cytokines such as interleukin-6 (IL-6) and interleukin-12 (IL-12) are central regulators of immune signaling and key biomarkers of disease, yet existing assays for their detection remain slow, invasive, and lack multiplexing ability. This dissertation advances the development of single-walled carbon nanotube (SWCNT) optical nanosensors capable of real-time, multiplexed, and molecularly specific cytokine detection through innovative use of single-stranded DNA (ssDNA) interfaces.

First, an IL-6-specific DNA aptamer was employed as both a dispersing agent and recognition probe for SWCNT fluorescence sensing. Sequence modifications, including anchor domains, truncations, and thermally induced refolding, were systematically tested to optimize sensitivity and selectivity. The …

Change Of Metal Oxidation State At High Temperature, Impact Of Temperature And Reactive Gases, Yegor Nikitin

Dissertations and Theses

The fundamental understanding of gas-solid reactions enables a wide range of applications to be developed and improved. Specifically, the use of metal-based materials is critical to ensuring robust, safe, and long-term operations. For example, in power systems where boilers are used to generate steam for heat or electricity generation the use of stainless metal alloys is critical to allow high quality steam to be produced in a very harsh environment. Alternatively, in catalysis, the use of metal doped heterogeneous catalysts are essential in achieving selectivity and conversion performance for chemical synthesis to emissions abatement. Typically, these metal alloys must withstand …

Phosphorescent Carbon Dots Doped Silica Nanomaterials Via Microwave-Assisted And Modified Stöber Methods For Anti-Counterfeiting And Biosensing, Weichao Liu

Dissertations and Theses

Phosphorescent materials are essential in bioimaging, anti-counterfeiting, and other applications due to their prolonged light emission. However, current phosphorescent materials face challenges such as complex synthesis, high costs, and instability. Carbon dots (CDs), with size less than 10 nm, are a promising alternative due to their biocompatibility, tunable optical properties, and simple synthesis. This thesis explores the synthesis of CDs using ethylenediamine (EDA) and phosphoric acid via a microwave-assisted method, followed by silica encapsulation using a modified Stöber process to form CDs@SiO2, aiming to enhance their stability and optical properties. Optical characterization showed a slight blue shift in the excitation …

Designing Fluorescent Moscs For Potential Applications In Illicit Drugs Detection, Robyn Nicole Cook

Dissertations and Theses

Illicit and hazardous substances pose a serious effect on the human body which can create longer-term issues on the mental and physical health which potentially lead to fatalities. Current methods for detecting illicit substances include analytical techniques like mass spectrometry (MS) and gas/liquid chromatography (GC/LC) which are known for accuracy and sensitivity. However, these instruments are bulky, costly, time-consuming, and require highly trained personnel. An alternative approach to overcoming these limitations is to employ nanostructured molecule-based chemical sensing technologies that are user-friendly, portable, and cost-effective with the sensitivity for detecting illicit substances. One such candidate is metal-organic super-containers (MOSCs), which …

Molecular Elucidation Of Reaction Mechanisms In Aluminum & Lithium Metal Batteries By Solid-State Nmr Spectroscopy And Electrochemical Methods, Leo W. Gordon

Dissertations and Theses

As society wrestles with the ever-growing climate consequences of burning fossil fuels, the increased demand for electric vehicles and renewable power generation mandates safe, sustainable, earth-abundant, low cost, and energy dense batteries. Different use cases will necessitate different types of batteries; for example, stationary storage systems prioritize minimal expense, whereas mobile applications like electric vehicles emphasize high energy densities. Aluminum and lithium metal batteries hold great promise for next-generation energy storage due to their large specific capacities (2980 mA h g^-1, and 3860 mA h g^-1, respectively). In particular, aluminum metal is low cost, has high …

Functionalizing Metal-Organic Super-Containers (Moscs) For Selective Anion Recognition, Hanying Li

Dissertations and Theses

Anions are ubiquitous in Nature and play critical roles in both chemistry and biology. Biologically important molecules like enzymes, DNA, and ATP (adenosine triphosphate) are either anionic or contain negatively charged regions. Inorganic anions such as Cl- and HCO3- play essential roles in various physiological, environmental, and technological processes. Compared to cations, anions have larger ionic radii and more diffuse charge distribution, resulting in weaker electrostatic interactions. Developing synthetic receptors for controlled anion recognition is vital but poses significant challenges. Recent decades have shown remarkable progress in anion recognition, yielding diverse synthetic receptors with promising binding abilities. However, traditional approaches …

Structural And Functional Modulation Of Metal-Organic Supercontainers (Moscs) And Their Applications In Supramolecular Catalysis, Shrijana Dc

Dissertations and Theses

Metal-organic supercontainers (MOSCs), a breakthrough development in our laboratory since 2012, have emerged as promising enzyme mimics, showcasing their prowess in encapsulating guest molecules and catalyzing confined chemical reactions. The intrigue surrounding MOSCs stems from their extraordinary traits, encompassing multiple binding domains, high stability, large surface area, tunable pore size, and structural modularity. Primarily comprising sulfonylcalix[4]arenes, divalent metal ions, and carboxylate linkers, MOSCs' quintessential architecture comprises both endo- and exo- nano-cavities, amenable to guest interaction, with geometry and functionality manipulation achievable through precise precursor selection. Nonetheless, early MOSC models exhibit limited reactivity, often necessitating more potent nucleophiles or electrophiles. This …

Chemistry Of Fluorinated Functional Groups: Impact On Molecular Packing, Optoelectronic Properties, Electrochemical Polymerization, Photochemistry, And Reagent Development, Shankar Gairhe

Dissertations and Theses

Fluorinated functional groups have attracted great interest in various aspects of chemistry applications including pharmaceuticals, organic electronics, and polymers. The aim of this study is to explore the impact of fluorinated functional groups on 1) optimization of crystal structures and electronic properties of organic semiconductor molecules, 2) electrochemical polymerization of fluorinated aromatics, 3) photochemical reactivity of carbonyl compounds, and 4) generating new nucleophilic fluorination reagents. Our initial work demonstrates that long fluoroalkyl side chains on planar aromatic systems give rise to fluorine-fluorine (F---F) attractive interactions, assisting formation of lamellar packing motif in the solid state. Surprisingly, introducing shorter perfluoroalkyl side …

Photophysical, Electrochemical, And Catalytic Studies Of Anthraquinone And Pyridoxyl-Based Sensors And Development Of Ruthenium Photosensitizers, Anwar Hussain

Dissertations and Theses

In the past, we have demonstrated the photophysical properties of several anthraquinone derivatives that act as a luminescent host for various environmental and biological cations. Here we extend our expertise in photochemistry to the class of chemicals containing the pyridoxal moiety. Several ligands were synthesized using eco-friendly, simple, one-step reactions via Schiff base and condensation reactions. The optical properties of these ligands were examined with a series of cations. We demonstrated the ability to detect the biologically important zinc ion in living cells such as RAW 264.7 and HEK 293 via fluorescence signaling. In addition, we extend our explorations to …

The Development And Application Of Instrumental Methods For The Identification Of Materials And Processes Used In The Manufacture Of Orotone, Hand-Colored Orotone, And Silvertone Photographs, Ivanny Jeannette Jácome-Valladares

Dissertations and Theses

Orotone photographs are positive photographic images on glass with a gold-colored metallic coating or backing. Although the materials and process used in the production of orotones have been previously documented, there is limited published scientific research on the subject. This study focused on expanding those published works by analyzing a greater number of photographs, including eleven orotones, four hand-colored orotones, two silvertones, and one uncoated orotone. The photographs, dating from the early to mid-20^th century, were from the University of Washington (UW) Libraries' collection, except for one orotone that was from the Portland Art Museum.

X-ray Fluorescence (XRF) spectroscopy, …

Sugar-Derived Oleogels In Cosmetics And Food Applications: A Case Study Of Trehalose- And Mannitol-Based Gelators, Polina Tsupko

Dissertations and Theses

Gels represent an indispensable part of our everyday lives with direct applications in food, medicine, cosmetics and other industries. Amphiphilic molecules have been shown to act as low molecular weight gelators (LMWGs) and are becoming the main focus of several research groups. Their ability to self-assemble into various morphologies from micelles to bilayer sheets, and remain stable due to noncovalent forces responsible for the formation of the 3D network—Self-Assembled Fibrillar Network (SAFiNs)—is in the core of their ability to produce molecular gels. Those amphiphilic molecules capable of adsorbing at the interface and behaving as surface active agents are known as …

Supercharging: An Investigation Into The Effects Of External Amino Acid Residue Charge On The Solubility And Internal Electric Character Of Bound Ligands In A Heme-Binding De Novo-Designed Protein, Cooper French

Dissertations and Theses

De novo protein design offers many interesting prospects both as a means to better understand natural protein dynamics and as a potential resource in biomedical and industrial applications. In this work I describe the modification of a simple, well-characterized heme-binding protein by altering side chain residue identities on the hydrophilic surface of the protein to produce variants with a range of net external charges. These charge modifications had a significant impact on nearly every measurable character of the protein. This work establishes the hard limits of supercharging within our experimental protein scaffold system, demonstrating that excessive positive charge increased the …

Sol-Gel Ph Sensors And Sol-Gel Metal-Removing Sorbents, Dong Liu

Dissertations and Theses

Sol-gel silica is a porous glasslike material that can be prepared at room temperature. In this work, sol-gel method was employed to develop sol-gel sensors for pH measurement and sol-gel silica sorbents for removal of heavy metals.

Sol-gel pH sensors were prepared by entrapping pH indicators in porous solgel silica films. The feasibility of developing optical pH sensors with linear response over a wide pH range by using mixtures of multiple indicators was demonstrated. Theoretical criteria and experimental procedures for selecting indicators and determining optimum ratios of indicators were discussed. A linear response over 4.5 pH units was obtained for …

On The Mechanism Of The Diels-Alder Reaction--Dimerization Of Trans-Phenylbutadiene, Michael Ward Mcnicholas

Dissertations and Theses

The Diels-Alder dimerization of trans-1-substituted butadienes is expected to yield a cyclohexene adduct with the substituents in the 3 and 4 positions cis to one another. This prediction is based on past observations of other Diels-Alder additions. The cis-isomer is the only one consistent with a two-stage mechanism proposed by Woodward and Katz.

In the case of trans-phenylbutadiene, the expected adduct is cis-3-phenyl 1-4-(trans-styry1) cyclohexene. Alder, Haydn and Vogt, however, reported that the corresponding trans-isomer is the dimerization product. There is reason to believe that the observation of the trans-isomer may have been the result of product isomerization during purification. …

Evidence For The Existence Of Two Stable Sites For Cobalt Impurity Atoms In Aluminum, Arun Venkatachar

Dissertations and Theses

Using Fe⁵⁷Mössbauer spectroscopy, two alternative sites occupied by cobalt (10^-4 at. % ) impurity atoms in aluminum have been isolated. The substitutional site A is the stable position after annealing the sample above 840 K, followed by a rapid quench. The impurity atoms in site A are characterized by a single line Mössbauer spectrum (indicative of a cubic environment), a room-temperature f = 0.502 (r. m. s. displ. 0.071 A) and an I. S. (reI. to Fe) = -0.421 mm/sec. For anneals below 770 K the cobalt atoms migrate to site B, which is characterized by a …

Investigation Of The Alpha-Sub-Gamma Phase In Alnico 6, Cortez Samuel

Dissertations and Theses

The purpose of this research project was to study the αᵧ phase in Alnico 6. Other phases were studies for comparison. Also the effect of an applied magnetic field on the formation of the αᵧ phase was investigated.

Three single crystals of Alnico 6 were heat treated for one hour--one at 1250°C, one at 1000°C, and one at 800°C--and water-quenched. The microstructure of each sample was observed with the optical microscope, and X-ray diffraction patterns were taken to determine the crystal structure of the phases present.

Several single crystal samples of Alnico 6 were heat treated at 1000°C and furnace-cooled. …