Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Process Reengineering And Optimization In Healthcare For Treating The Uninsured, Farnaz Nourbakhsh

Operations Research and Engineering Management Theses and Dissertations

Uninsured patients suffering from chronic diseases may have access to medical treatment under federal law, EMTALA, only after being evaluated as in'emergent, life-threatening condition' in the emergency room (ER). These patients seek regular treatment typically at the ER of county hospitals throughout the nation. In the case of End Stage Renal Disease (ESRD), uninsured patients needing recurring dialysis receive the treatment conditional on a screening assessment in the ER. Unfortunately, depending on the screening outcome, some of these patients may not qualify for immediate treatment, and hence, may be rejected service under the existing treatment protocol. This practice is known …

Application Of Acquisition Theory, Elizabeth Rose Cavin, Hillary Palmer, Paul Collopy

Von Braun Symposium Student Posters

No abstract provided.

Minimodal: Dimensional Domain Of Miniature Shipping Containers For Intermodal Freight Transportation, Lee Stapley

Ursidae: The Undergraduate Research Journal at the University of Northern Colorado

This study explores the feasibility of miniature shipping container usage within existing intermodal transportation (IT) supply chains. Smaller intermodal container shipments may help realign freight shipments with the most efficient transportation mode, rail. These containers embolden the dimensional domain (DD) of shipping. The shipping container dimensional domain (container size variation and modal fluidity) is widespread and results in shipments that are often larger or more infrequent than needed. The DD impacts transport mode, shipping frequency, shipment velocity, intermodal supply chain accessibility, and regional shipping networks. This study suggests that container size impacts the DD and, therefore, mode choice. As miniature …

Application Of Big Data Analytics In Agriculture Supply Chain Management, Sankara Narayanan Mangalam Ananthapadmanabhan

Master's Theses

The increasing trend in frequency of natural disasters in tandem with globalization of business makes the agricultural supply chain significantly vulnerable to disruption. This thesis presents a pragmatic approach for creating a Business Continuity Model that can notify supply chain planners when there is an increase in risk of agriculture supply chain disruption due to natural disasters. The methodology presented in this thesis applied big data analytics and machine learning algorithms along with agriculture product related exponential decay function to create a regionalized composite risk score, that incorporated both direct and indirect risk associated with the Agriculture Fresh Supply Chain. …

Bmap/G/C Queueing Model With Group Clearance Useful In Telecommunications Systems – A Simulation Approach, Srinivas Chakravarthy, Alexander Rumyantsev

Industrial & Manufacturing Engineering Publications

Queueing models in which customers or messages arrive in batches with inter-arrival times of batches possibly correlated and services rendered in batches of varying sizes play an important role in telecommunication systems. Recently queueing models of BMAP/G/1-type in which a new type of group clearance was studied using embedded Markov renewal process as well as continuous time Markov chain whose generator has a very special structure. In this paper, we generalize these models to multi-server systems through simulation approach. After validating the simulation model for the single server case, we report our simulated results for much more general situations.

Data Visualization Of Treatment Outcomes For Tuberculosis Patients, Joy Jenkins

Industrial Engineering Undergraduate Honors Theses

Tuberculosis is an infectious disease, and different treatments have been discovered over the years. However, patients may develop various drug resistance levels that affect the likelihood of becoming cured or dying. In this study, we sought to employ data visualization to explore the relationship between treatment trajectory, as indicated by smear and culture results in the follow-up tests and patient outcomes. A large sample of patients have been broken down by demographics including age, gender, and drug resistance status. Sankey diagrams were used to visualize the pathway progression of the patients over time split between two time periods- months 0-6 …

Smart Flow Facility Analysis, Chantal Ann George, Pete Suktankar, Eric Wilson, Matthew Geiger

Senior Design Project For Engineers

The SMART Flow Design Team has been tasked in providing a physical layout for a single building facility used to consolidate three separate business units. The objective for the new facility will be to manufacture, receive, ship, and store the company's finished products. When designing the physical layout, the team must take into consideration stable and seasonal business volumes, current and future volume demand growth, designated inbound, outbound, and storage areas, and product turn rates. All specifications must be met while determining an efficient flow of goods. The team has designed indoor and outdoor layouts using Microsoft Visio, performed various …

Foster Care Support Foundation Volunteer And Capital Outreach Analysis, Abeer Bhatti, Alexandro Martinez, Sunny Patel, Desmond Vail

Senior Design Project For Engineers

Care Support Foundation (FCSF) provides free goods to children in Georgia. Annually, 11,000 volunteers are needed to deal with the massive influx of donations and fundraising events. Through our analyses, we aim to make recommendations to the FCSF, which can help raise funds and implement mitigating strategies that would increase funds and improve the foundation.

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

Emergency Department Triage Process Improvement, Tessa Williams

Honors Theses

This senior design project was completed at Ascension Borgess Hospital located in Kalamazoo, Michigan. The mission of Ascension Borgess Hospital is to provide patient centered care. In 2018, 562 patients left the Emergency Department (ED) without being seen, which is a large safety risk for the patients and hospital. Based on this, as well as other obstacles, this project focused on meeting the mission of Ascension Borgess by improving key ED metrics that impact patient centered care. In order to meet that mission, this study aims to improve patient experience, safety and quality of the care provided, profitability for the …

Integrated: A Student's Guide To Systems Engineering, Hannah Smith

Research Horizons Day Posters

No abstract provided.

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Data

Corresponding data set for Tran-SET Project No. 17ITSOKS02. Abstract of the final report is stated below for reference:

"The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared …

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Publications

The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared towards identifying effective freight consolidation opportunities. A branch-and-cut algorithm to solve the model was also developed. The model …

36% Reduction In Fuel Resupply Using A Hybrid Generator & Battery System For An Austere Location, David J. Chester, Torrey J. Wagner, Douglas S. Dudis

Faculty Publications

The DOD energy policy is to increase energy security resiliency, and mitigate costs in the use and management of energy^[1] Forward operating bases (FOBs) are remote, austere base camps that support an operationally defined mission with a limited or no ability to draw from an energy grid and have historically relied on diesel-powered generators for the primary production of energy.^[2] Generators are sized to meet a theoretical peak demand, but steady state loads are far below this peak, resulting in under-loaded generators.^[3] Under-loaded diesel generators decrease efficiency and increase the need for maintenance, affecting the lifespan of …

Analogies And Comparisons For Stm Data Bodies, Phillip M. Cunio, Brien Flewelling

Space Traffic Management Conference

Space Traffic Management (STM) has already demonstrated its potential to be extremely data-intensive. The large number of objects on orbit today, if observed constantly throughout their lifetimes, could produce a staggeringly large number of observations that might in turn generate large numbers of orbits. Orbit data with a lengthy time history can be used to produce estimates of maneuver frequency, susceptibility to natural forces such as drag, and (if combined with photometric data) assessments of behavioral patterns of life.

A future of mega-constellations and a growing number of nations and organizations with assets on orbit would make it likely that …

Biologically Inspired Design Of Context-Aware Smart Products, Ang Liu, Ivan Teo, Diandi Chen, Stephen Lu, Thorsten Wuest, Zhinan Zhang, Fei Tao

Faculty & Staff Scholarship

The rapid development of information and communication technologies (ICTs) and cyber–physical sys-tems (CPSs) has paved the way for the increasing popularity of smart products. Context-awareness isan important facet of product smartness. Unlike artifacts, various bio-systems are naturally characterizedby their extraordinary context-awareness. Biologically inspired design (BID) is one of the most commonlyemployed design strategies. However, few studies have examined the BID of context-aware smart prod-ucts to date. This paper presents a structured design framework to support the BID of context-awaresmart products. The meaning of context-awareness is defined from the perspective of product design.The framework is developed based on the theoretical foundations …

Autonomous Airliners Anytime Soon?, Samuel M. Vance, Evan C. Bird, Daniel J. Tiffin

International Journal of Aviation, Aeronautics, and Aerospace

This research seeks to extend the body of knowledge on factors influential in the decision to fly on an autonomous airliner as a passenger. Only a handful of studies have probed this direct question in the last 16 years, but the data is showing a growing public acceptance of this type of travel. Pivotal in this consideration is the basic element of trust – trust in automated airliners and trust in the airline and Air Traffic Control systems which are responsible for autonomous airliners. Human trust has many forms and manifestations, but in the end, it is a dichotomous or …

Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).

FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …

Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav, Thomas Wheeler, Zachary Williams, Joseph Stack

Williams Honors College, Honors Research Projects

The following report has been completed over the course of the Fall 2018 and Spring 2019 semesters at The University of Akron by Joseph P. Stack (Aerospace Systems Engineering), Thomas J. Wheeler (Mechanical Engineering) and Zachary M. Williams (Mechanical Engineering). The purpose of this project was to create a payload system for the Akronauts Rocket Design Team to use at the Intercollegiate Rocket Engineering Competition (IREC) Spaceport America Cup. The Competition as a challenge that is sponsored by Space Dynamics Laboratory specifically regarding payload systems. The challenge in very open-ended and allows student to identify their own scientific experiment and …

A Case For Open Mission Systems In Dod Aircraft Avionics, Michael J. Brown, R. David Fass, Jonathan D. Ritschel

Faculty Publications

The DOD is adopting open mission systems (OMS) as the future in the military aviation environment. OMS proponents promise reduced costs and truncated schedules through increased competition in the marketplace and reduced coding efforts. To the best of our knowledge, no studies have examined the success of these open architectures in the DOD. Therefore, we investigate costs and schedule for a recent DOD avionics OMS demonstration platform in comparison to 13 historically analogous programs.

Material Interactions And Self-Assembly In Inkjet Printing, Karam Nashwan Al-Milaji

Theses and Dissertations

Inkjet printing has attracted much attention in recent years as a versatile manufacturing tool, suitable for printing functional materials. This facile, low-cost printing technique with high throughput and accuracy is considered promising for a wide range of applications including but not limited to optical and electronic devices, sensors, solar cells, biochips, and displays. The performance of such functional devices is significantly influenced by the deposit morphology and printing resolution. Therefore, fabrication functional devices with precise footprints by inkjet printing requires deep understanding of ink properties, material interactions, and material self-assembly.

In conventional inkjet printing process, where sessile droplets are directly …

L1 Month: Utilizing High Power Rocketry As A Training Tool For Student Organizations, Aaron Hunt, Oakley Copeland, Mckynzie Perry, Benjamin Thomas

Von Braun Symposium Student Posters

No abstract provided.

Understanding The Rocket Economy, Luke Smith, Christopher White, Victor Lopez

Von Braun Symposium Student Posters

No abstract provided.

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Modular Crates – A Holistic Design Approach For Optimizing Cube Size In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Global market is a field where all industries strive to provide personalized product for every customer demand in order to compete with their competitors in the business battlefield. Product personalization varies with customer to customer which increases the product variety. When the product size variability is vast, producing packages for every individual product is not only difficult but also increases the design time, production time, total manufacturing cost and inventory cost. For the present scenario, Industrial packages does not opt customizability for variable product sizes. Customized package for personalized product is achievable only by redesigning the existing distribution package with …

Origami-Based Deployable Ballistic Barrier, Kenny Seymour, Dakota Burrow, Alex Avila, Terri Bateman, David C. Morgan, Spencer P. Magleby, Larry L. Howell

Faculty Publications

This paper demonstrates how recent developments in origami crease pattern adaptation, surrogate folds, and thickness accommodation techniques enabled development of an origami-based deployable ballistic barrier. The barrier crease pattern was employed using the membrane-fold technique for surrogate folds and to assist in thickness accommodation. A proof-of-concept barrier was fabricated and tested, demonstrating ballistic resistance, a large deployment ratio, and rapid deployment times.

Throughput And Yield Improvement For A Continuous Discrete-Product Manufacturing System, Md Shahriar J. Hossain

LSU Doctoral Dissertations

A seam-welded steel pipe manufacturing process has mainly four distinct major design and/or operational problems dealing with buffer inventory, cutting tools, pipe sizing and inspection-rework facility. The general objective of this research is to optimally solve these four important problems to improve the throughput and yield of the system at a minimum cost.

The first problem of this research finds the optimal buffer capacity of steel strip coils to minimize the maintenance and downtime related costs. The total cost function for this coil feeding system is formulated as a constrained non-linear programming (NLP) problem which is solved with a search …

Effective Resource Utilization In Arkansas Public Schools, Ryan Sanders

Industrial Engineering Undergraduate Honors Theses

Teacher pay in Arkansas public schools varies widely from district to district across the state. This pay discrepancy is driven by both the funds available to a district and by how these funds are allocated. There is a standard per student budget given to districts across the state, but this budget can be supplemented by additional property taxes collected on property within a district. This leaves districts with more highly valued property at an advantage. Districts are free to allocate their budget for teacher pay as they see fit, with constraints on number of students per teacher and minimum teacher …

A Method For Robust Requirements Definition, Marc Gethers

Research Horizons Day Posters

No abstract provided.

Likelihood And Cost Impact Of Engineering Change Requirements For Dod Contracts, James C. Ellis, Edward D. White, Jonathan D. Ritschel, Shawn M. Valentine, Brandon Lucas, Ian S. Cordell

Faculty Publications

Purpose: There appears to be no empirical-based method in the literature for estimating if an engineering change proposal (ECP) will occur or the dollar amount incurred. This paper aims to present an empirically based approach to address this shortfall.
Design/Methodology/Approach: Using the cost assessment data enterprise database, 533 contracts were randomly selected via a stratified sampling plan to build two regression models: one to predict the likelihood of a contract experiencing an ECP and the other to determine the expected median per cent increase in baseline contract cost if an ECP was likely. Both models adopted a stepwise approach. A …