Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Optimization Of Human Interactions In The College Campus Model Via Simio Integration, Benjamin E. Chaback

Doctoral Dissertations and Master's Theses

College campuses are a significant part of life in some cities. Many students each year attend university, pursuing additional knowledge from faculty members. Both staff and faculty members rely on these students to have successful jobs and to ensure the university functions. Yet recently, more and more students are attending, leading to overcrowding, lower admission rates, and difficulty getting into good programs. Previous work exists on qualitative student affairs and quantitative retention data, yet little on using simulations to model this problem. This work aimed to (a) Determine the ability to successfully model human interactions/people flow on a college campus, …

Development Of Dynamic Mass-Energy-Thermodynamics Constrained Hybrid Neural Network Models For Process Systems Applications, Angan Mukherjee

Graduate Theses, Dissertations, and Problem Reports (ETD)

First-principles models can provide very good predictions even for cases when there are no data at all, or data are limited in certain range of operating conditions, or for cases where data collection is infeasible. However, the development of accurate first-principles models for complex nonlinear dynamic systems can be time consuming, computationally expensive, and may be infeasible for certain systems due to lack of sufficient knowledge (information). It is also challenging to adapt first-principles models for time-varying systems. Furthermore, it can be difficult, if not impossible, to develop accurate models for some complex phenomena that are poorly understood. On the …

Imerys: Tube Mill Optimization Project, Ryan Waltman, Dalton Beasley, Dyson Beasley, Tristan Mcmichael

Senior Design Project For Engineers

The Tube Mill Optimization Project is in partnership with Imerys for Tube Mill 81 at their Marble Hill site in Georgia. Tube Mill 81 is a dry ball mill that operates 24/7 and makes an intermediary product for Plant 3. Tube Mill 81 needs quality improvement and a production rate increase to meet demand. Imerys’s quality specification is between a particle size of 12-18 microns and an acceptable production rate of 5 tons per hour. This project focuses on the development and implementation of three solutions: increase the amps on the separator to increase production, replace missing classifier blades in …

Team And Skill Matching For Disaster Recovery Operations, Emily B. Frahm

Theses and Dissertations

United States Air Force (USAF) bases are key power projection platforms that ensure mission readiness and help bring humanitarian aid to locations in need. Recovering airfields after attack or natural disaster is a key mission of USAF civil engineers, and accomplishing this repair as swiftly as possible is key to maintaining our position in the global order. Accomplishing a disaster recovery project is a set of teams, each assigned to a specific task, and made up of a series of personnel. The question answered within this paper is: how do we match the right person with the appropriate skills to …

Cooperative Wide Area Search Algorithm Analysis Using Sub-Region Techniques, Shawn Whitney

Theses and Dissertations

Recent advances in small Unmmaned Aerial Vehicle (UAV) technology reinvigorates the need for additional research into Wide Area Search (WAS) algorithms for civilian and military applications. But due to the extremely large variability in UAV environments and design, Digital Engineering (DE) is utilized to reduce the time, cost, and energy required to advance this technology. DE also allows rapid design and evaluation of autonomous systems which utilize and support WAS algorithms. Modern WAS algorithms can be broadly classified into decision-based algorithms, statistical algorithms, and Artificial Intelligence (AI)/Machine Learning (ML) algorithms. This research continues on the work by Hatzinger and Gertsman …

Essays On Perioperative Services Problems In Healthcare, Amogh S. Bhosekar

All Dissertations

One of the critical challenges in healthcare operations management is to efficiently utilize the expensive resources needed while maintaining the quality of care provided. Simulation and optimization methods can be effectively used to provide better healthcare services. This can be achieved by developing models to minimize patient waiting times, minimize healthcare supply chain and logistics costs, and maximize access. In this proposal, we study some of the important problems in healthcare operations management. More specifically, we focus on perioperative services and study scheduling of operating rooms (ORs) and management of necessary resources such as staff, equipment, and surgical instruments. We …

Interdiction Models To Disrupt The Operations Of Sex Trafficking And Other Forced Illicit Labor Networks, Michael T. Clark

All Theses

Sex traffickers often force their victims to work in both commercial sex markets and perform other illicit activities (e.g., drug dealing, theft, and fraud). Current literature has failed to address interdiction models that aim to disrupt all components of a sex traffickers’ operation, including these other illicit activities. In this thesis, we present a interdiction problem, and its single-level linear optimization reformulation, to reduce the profit of a human trafficking network concurrently operating in the commercial sex market and other illicit activity markets. Our novel formulation aims to investigate the practical implications of interdiction decisions made to disrupt a human …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Cost Analysis Of Optimized Islanded Energy Systems In A Dispersed Air Base Conflict, Jay F. Pearson, Torrey J. Wagner, Justin D. Delorit

Faculty Publications

The United States Air Force has implemented a dispersed air base strategy to enhance mission effectiveness for near-peer conflicts. Asset dispersal places many smaller bases across a wide geographic area, which increases resupply requirements and logistical complexity. Hybrid energy systems reduce resupply requirements through sustainable, off-grid energy production. This paper presents a novel hybrid energy renewable delivery system (HERDS) model capable of (1) selecting the optimal hybrid energy system design that meets demand at the lowest net present cost and (2) optimizing the delivery of the selected system using existing Air Force cargo aircraft. The novelty of the model’s capabilities …

Curriculum Optimization Via Activity-On-Node Network Modeling, Caroline Rhomberg

Industrial Engineering Undergraduate Honors Theses

University degree plans must be carefully planned so that they allow students the best chance of succeeding. Although for the better, with the advancement of technology and its incorporation into the classroom, it can be argued that the complexity and difficulty of some long-established engineering core classes has changed. With this trend certain combinations of engineering courses have become unfavorable in terms of course withdrawal and fail rates stemming from the interaction of course challenges. A wealth of data has been collected on this topic and will be utilized in this project. As one can imagine, the probability of success …

Efficiency Analysis Of A Congested Brazilian Airport Applying Slots Optimization Control: Congonhas Airport Case, Mariana Franco B. Mendes, Rafael Roco De Araujo, Ana Paula Beck Da Silva Etges, Massoud Bazargan

International Journal of Aviation, Aeronautics, and Aerospace

The current slot allocation mechanism in Brazil, based on the International Air Transport Association (IATA) rules, and its supplementary local regulation The National Civil Aviation Agency (ANAC), displays a few issues and limitations (e.g. slot misuse, allocation inefficiencies). Such issues are particularly present in the case of busy airports that works near their maximum capacity for major parts of the day. This inefficiency problem is generated because of the complexity of slot allocation added to the limited decision support available for the Brazilian system. This study focuses on the implementation of an optimal slot model, based on IATA regulations with …

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

The Context Of Tool Control In An Aircraft Assembly Environment Related To Productivity, Taylor Jay Sisson

KSU Journey Honors College Capstones and Theses

The aircraft industry focuses a large portion of its resources on tool control during the assembly of aircraft. Tool control is a strict process that demands time from the assembly process. This time is removed from the value-added time spent actually assembling the aircraft. A study at Lockheed Martin conducted in the Spring of 2016 is discussed that examines the time spent on tool control. Tool control is necessary in aircraft assembly to prevent tools from entering compartments of the aircraft. If such an event occurs, the tool may damage the aircraft. All aircraft assembly processes must be tool controlled, …

Optimization Of Rfid System Coverage In A Manufacturing Environment, Scott D. Malatesta

Master's Theses

This paper compiles existing ideas, theories, and experiments across multiple disciplines to provide guidance for a company looking to implement an optimal RFID system in their production facility. The desire is to maximize the information received by the system while minimizing the cost. Four potential layouts of RFID antennas, two with overlapping antenna coverage and two with non-overlapping layouts, are first analyzed to understand the special coverage and the number of antennas required. The value of information is then quantified to determine whether higher coverage layouts are worth the additional costs associated with the higher number of antennas required. It …

Mathematical Modeling For Platform-Based Product Configuration Considering Total Life-Cycle Sustainability, Tian Lan

Theses and Dissertations--Mechanical and Aerospace Engineering

Many companies are using platform-based product designs to fulfill the requirements of customers while maintaining low cost. However, research that integrates sustainability into platform-based product design is still limited. Considering sustainability during platform-based design process is a challenge because the total life-cycle from pre-manufacturing, manufacturing and use to post-use stages as well as economic, environmental and societal performance in these stages must be considered. In this research, an approach for quantifying sustainability is introduced and a mathematical model is developed for identifying a more sustainable platform. Data from life-cycle assessment is used to quantify environmental factors; criteria from the Product …

A Study Of Queuing Theory In Low To High Rework Environments With Process Availability, Adam J. Brown

Theses and Dissertations--Manufacturing Systems Engineering

In manufacturing systems subject to machine and operator resource constraints the effects of rework can be profound. High levels of rework burden the resources unnecessarily and as the utilization of these resources increases the expected queuing time of work in process increases exponentially. Queuing models can help managers to understand and control the effects of rework, but often this tool is overlooked in part because of concerns over accuracy in complex environments and/or the need for limiting assumptions. One aim of this work is to increase understanding of system variables on the accuracy of simple queuing models. A queuing model …

Energy Audit And Optimization For "Arches Etc.", James Ross Dixon

Industrial and Manufacturing Engineering

Arches etc. is a San Diego business, which specializes in the manufacture, distribution, and installation of custom designed doors, windows, mouldings, and hardware. Due to the recent economic downturn, which has hindered the construction industry, Arches etc. believed that an analysis and optimization of their energy usage would provide additional assistance towards their goal to lower overhead and maintain current operations.

To begin this task, a comprehensive energy audit was conducted to establish an initial state from which to base improvements. Arches etc.’s current monthly utility bill averages $996, which solidifies the accuracy of this project’s performed energy audit, estimating …

A Game-Theoretic Improvement Model For Stochastic Networks: Reliability Vs. Throughput, Jeffrey A. Schavland

Theses and Dissertations

Prescriptive models used to allocate resources for network improvement traditionally have used reliability or flow as Measures of Effectiveness (MOEs). Such metrics do not give value to efforts which make a component more difficult to exploit. This study developed an entirely new MOE for stochastic network improvement, flow damage utility, which uses a two person, zero-sum, non-cooperative game to optimize a probabilistic network for an estimate of expected flow minus performance degradation after a worst case component loss. A multiple criteria optimization problem that uses flow damage utility and an analogous, previously developed metric for the reliability problem is used …