Other Operations Research, Systems Engineering and Industrial Engineering Commons^™

Integrating Gis With Interim Payment Valuation In Road Construction Projects: A Conceptual Framework, Abdulrahman I. Iro, Juma M. Matindana, Julian Ijumulana

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Interim Payment Valuation is a critical process in road construction contract administration, yet conventional valuation practices remain heavily dependent on manual measurements, fragmented documentation, spreadsheets, and professional judgement. These limitations can affect measurement accuracy, transparency, traceability, and the timeliness of payment certification. Although Geographic Information Systems have increasingly been applied to construction planning, quantity measurement, progress monitoring, infrastructure management, and decision support, their integration with contractual and financial processes for interim payment valuation remains insufficiently explored. This study therefore develops a conceptual framework for integrating GIS with Interim Payment Valuation in road construction projects. A PRISMA-guided structured literature review …

Voltage-Related Power Quality Issues And Impacts On Distribution Networks With Sensitive Loads - A Review, Godwin Elinazi Mnkeni, Jackson Justo, Aviti Thadei Mushi, Bakari M. M. Mwinyiwiwa

Tanzania Journal of Engineering and Technology (TJET)

Voltage disturbances are the most important power quality (PQ) complications that customers and power utilities face in this smart era. The growing adoption of sophisticated electronic equipment and integration of renewable energy sources (RES) into power grids has increased the susceptibility of power distribution networks (PDNs) to voltage sags, swells, interruptions, flicker, and voltage imbalance. These disturbances, mainly caused by upstream faults, switching operations, and RES integration, compromise voltage PQ and system reliability. Consequently, they accelerate equipment degradation, increase electronic waste (e-waste), raise reactive power demand and maintenance costs, increase power losses, and impose substantial economic losses on customers and …

Urban Spatial Development Control In Tanzania: Analysis Of Factors Influencing Gis Application Using Structural Equation Modelling (Sem)., Happiness Protas Mmanda, Nestory Yamungu

Tanzania Journal of Engineering and Technology (TJET)

Rapid urbanization in developing countries has intensified urban expansion, creating challenges for sustainable development. Geographic Information Systems (GIS) enhance spatial planning, but empirical evidence on factors influencing their effectiveness remains limited. This study examines determinants of GIS application in Urban Spatial Development Control (USDC). The objectives are to (1) identify and categorize factors affecting GIS use, (2) assess relative strength, and (3) develop a validated structural model explaining GIS adoption in USDC. Data were collected from 103 LGAs by a mixed sampling method. Exploratory and Confirmatory Factor Analysis classified influencing factors into technology-related (α = 0.869, CR = 0.881), process-related …

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi

Tanzania Journal of Engineering and Technology (TJET)

The Kilombero Basin in southeastern Tanzania faces significant challenges due to rapid land use and land cover (LULC) changes driven by climate change, population growth, and unsustainable farming practices. This study assessed the role of community engagement and digital reporting through the 'NITUNZE KILOMBERO', mobile application in supporting water resources management in the basin. The App facilitates real-time reporting of environmental issues, provides educational resources, and enables collaboration between local communities and authorities. A mixed-methods approach, including household surveys and key informant interviews, was employed to assess the app's effectiveness. Results indicate high community awareness of LULC impacts, with 85% …

Cnn-Based Hybrid Model For Detecting Blight Diseases In Potato Crops With Advanced Image Processing Techniques, Farian S. Ishengoma

Tanzania Journal of Engineering and Technology (TJET)

Potato production plays a vital role in global agriculture as a major food source for large populations. However, potato crops are highly susceptible to diseases, particularly Early Blight and Late Blight, which result in substantial yield losses. Timely detection and effective control of these diseases are essential for maintaining stable crop output. This study explores the integration of Convolutional Neural Networks (CNNs) and advanced image processing techniques to differentiate between diseased and healthy potato plants accurately. Two datasets comprising original and enhanced images were used to train four CNN models: InceptionV3, Xception, Densenet201, and Resnet152V2. The original images underwent background …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Assessment Of Digital Solutions For Conformity Assessment Of Legally Controlled Measuring Instruments In Tanzania, Faraja Nyoni

Tanzania Journal of Engineering and Technology (TJET)

The advent of state-of-the-art digital technologies since 2011 has led to the digital transformation of legal metrology practices to ensure the trustworthiness of software-controlled measuring instruments globally. Despite the digital transformation in legal metrological practices, the conformity assessment of legally controlled measuring instruments is manually done (i.e., paper-based) in Tanzania. The paper-based conformity assessment of legally controlled measuring instruments is prone to error and lacks efficiency and effectiveness. This study aimed to assess digital solutions for improving conformity assessment through a comprehensive survey conducted across various regions in Tanzania, targeting a stratified sample of 51 respondents from organizations involved in …

A Critical Realist Erp Implementation In Zimbabwean Mining Industry Organisations, Jairos Mukwenha

Tanzania Journal of Engineering and Technology (TJET)

This research uses a critical realist framework to examine the factors influencing the success of enterprise resource planning (ERP) system implementation in Zimbabwean mining industry organisations. From the perspective of critical realism, the mining industry in Zimbabwe faces a complex interplay of opportunities and obstacles while implementing ERP systems. The deployment of ERP in mining firms is critically examined in this paper, emphasising how these systems might improve operational efficiency while considering Zimbabwe's particular socioeconomic circumstances. By exploring underlying structures, mechanisms, and outcomes, the research aims to identify critical challenges and opportunities and develop practical recommendations for improving ERP adoption …

Design And Performance Analysis Of Fiber Bragg Grating Temperature Sensor For Industrial Processes Sensing Applications, Paul Stone Stone Brown Macheso S.B.

Tanzania Journal of Engineering and Technology (TJET)

The Fiber Bragg Grating (FBG) sensor has become a widespread sensing device because of its small size, passive design, immunity to electromagnetic interference, and direct ability to measure physical properties like temperature and strain. Recently, femtosecond infrared laser processing and regeneration techniques have resulted in the development of stable high-temperature gratings, which are a powerful tool in smart factories, an aspect of the fourth Industrial Revolution (4IR), and show promise for application in harsh environments like high pressure, high temperature, or ionizing radiation. The development of stable high-temperature gratings that can withstand harsh environmental factors like high temperatures, pressures, and …

Digital Thread: Bridging Macro–Micro Services In System-Of-Systems, Joshit Mohanty

Graduate Student Government Association Research Conference

Organizations and industries increasingly rely on distributed services in decentralized environments—ranging from large-scale, system-of-system architectures to fine-grained, agent-based microservices. While this distributed paradigm offers flexibility and innovation, it presents critical challenges such as interoperability gaps, inconsistent data formats, and a lack of holistic oversight. Traditional integration approaches, including ad-hoc middleware or enterprise service buses, tend to solve these issues reactively. As a result, technical debt accumulates, stakeholder misalignments persist, and scaling to new demands becomes complex.

This research proposes digital thread (DT) as the unifying framework to create an authoritative source of truth: a continuous flow of information across the …

Performance Evaluation Of Free Space Optical Communication In Dar Es Salaam: Impact Of Scintillation And Modulation Schemes, Mustafa H. Mohsini

Tanzania Journal of Engineering and Technology (TJET)

Free space optical communication (FSO) holds significant relevance in the modern communication system as it offers high and unlimited data rates, enhanced security, rapid deployment, and low cost for installation. However, the performance of FSO transmission is greatly affected by harsh atmospheric conditions such as wind, temperature, and humidity, which induce scintillation. With the rapid growth of internet users and Dar es Salaam being a business city in Tanzania, higher and unlimited bandwidth for communication is highly demanded. This study primarily aims to evaluate the performance of FSO transmission in Dar es Salaam, Tanzania, by investigating the impact of atmospheric …

Improved Minimum Variance Channel Estimation Techniques For Ofdm Systems, Kwame S. Ibwe

Tanzania Journal of Engineering and Technology (TJET)

Orthogonal frequency division multiplexing (OFDM) systems face challenges in channel estimation due to noise, variability, and the doubly dispersive nature of wireless channels, which degrade performance. To address these challenges, a multichannel minimum variance double dispersive channel estimator is proposed. The method employs a hybrid approach that combines subspace and minimum variance techniques, optimizing the filter bank output power under a signal-to-noise ratio (SNR) constraint. This design preserves the desired signal while effectively suppressing disturbances, achieving robust performance with reduced computational complexity compared to existing methods. Simulation results demonstrate that the proposed estimator outperforms subspace and asymptotic methods in terms …

Investigations Of Cell Tower Antennas Parameters On Reduction Of Radio Frequency Radiation Levels From Radio Base Stations, Florence U. Rashidi

Tanzania Journal of Engineering and Technology (TJET)

The widespread deployment of mobile cellular base stations in populated areas has raised public health concerns due to increased exposure to radio frequency (RF) radiation emissions. Exposure to high levels of RF radiation can have potential thermal and non-thermal biological effects. Optimizing the configuration of cell tower antenna parameters is crucial for mitigating these radiation levels. This study therefore aims at systematically investigating the influence of different cell tower antenna parameters on reducing the RF radiation levels from mobile base stations. Field measurements were conducted at two cell sites shared by multiple mobile operators. Electric field strengths were measured at …

Evaluation Of Business-Driven Reference Architecture For Big Data Analytics Implementation By Public Sector Organizations In Resource-Constrained Setting: A Case Study Of Uganda, Matendo Didas

Tanzania Journal of Engineering and Technology (TJET)

Big Data Analytics (BDA) is a new area at the nexus of agenda, public sector organizations, and government business. It may satisfy the growing need for trustworthy, cost-effective services in the public sector for better, more informed decision-making processes. BDA has been proposed on the planning schedules of several public sector organizations and the government. Therefore, from the previous work, using Uganda as a case study, specifically the Uganda Bureau of Statistics (UBOS), Ministry of Health (MoH), and Ministry of Education and Sports (MoES), this study aims to evaluate a designed Business-Driven Reference Architecture for Big Data Analytics Implementation (BRABDAI) …

Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett

Tanzania Journal of Engineering and Technology (TJET)

Despite the introduction of the perimeter blasting technique at the Tulawaka Gold Mine, the mine continued to suffer from an overbreak of mine development headings, with an average overbreak of 24% every 22 m, which is approximately twice the acceptable 10% overbreak. The causes of this problem include ineffective drilling practices and uneven and excessive charging of explosives, resulting in a slightly high powder factor of 3.94 kg/m3 instead of 3.8 kg/m3, as per the design. The problem of overbreak resulted in ore dilution, a longer mine development cycle time and additional costs of approximately US$ 45 per cut, especially …

An Optimization Tool For A Standalone Photovoltaic System, Johanes Kasilima

Tanzania Journal of Engineering and Technology (TJET)

Stand-alone photovoltaic systems (SAPV) are often used in remote areas where access to grid electricity is limited. This system depends on solar energy. However, Photovoltaic (PV) systems need a greater initial investment than conventional sources of energy, and their effectiveness is reliant on a number of environmental conditions such as the unpredictable solar radiation. One step in reducing the investment cost of a PV system is determining the optimal size of solar PV components that minimize costs. This paper presents a Particle Swarm based optimization tool for sizing Stand-alone PV systems. The optimization tool selects the optimal Levelized Cost of …

Evaluation Of Cybersecurity In Remote Working Settings For Mobile Network Operators, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

Cybersecurity has increasingly been a primary concern to people as technology advances and allows them to work remotely. This study thus evaluated the cybersecurity posture for organisations that have opted for remote working culture, whereas emerging cyber threats, practices to combat them, and appropriate guidelines for managing cyber threats were discussed. The study used a descriptive design with a quantitative approach from 118 information technology personnel working for Tanzania's three major mobile network operators (MNOs). SPSS analysed the collected data. The study revealed that predominant cyber-threats affecting MNOs in remote working include human errors, phishing attacks, malicious domains, denial of …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Migrating A C-Based Cad Tool To An Object-Oriented Database/C++ Environment: Conversion Costs And Performance Analysis, Mark A. Roth, Timothy M. Jacobs

AFIT Documents

his paper examines the potential of object-oriented databases to support complex design applications. To do this we migrated the Magic very large scale integrated (VLSI) circuit design tool written in the C language to a new environment in which Magic's existing file management code is replaced with a C++ language interface to the commercial object-oriented database management system (OODBMS) product Object Store. In our initial implementation we found the performance of this tool as implemented on the OODBMS to be marginally faster than the tool as currently implemented with a flat file system in several critical areas. Increased functionality, including …