Nuclear Engineering Commons^™

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla

Undergraduate Research Conference at Missouri S&T

No abstract provided.

Afci Quarterly Input – Unlv January 1 Through March 31, 2006, Harry Reid Center For Environmental Studies. Nuclear Science And Technology Division

Transmutation Research Program Reports (TRP)

Quarterly report highlighting research projects, activities and objectives of the Transmutation Research Program at the Nuclear Science & Technology Division, Harry Reid Research Center.

The University of Nevada, Las Vegas supports the AFCI through research and development of technologies for economic and environmentally sound refinement of spent nuclear fuel. The UNLV program has four components: infrastructure, international collaboration, student-based research, and management and program support.

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead-Alloys Coolant Systems: Quarterly Progress Report (01/01/06- 03/31/06), Yitung Chen

Transmutation Sciences Materials (TRP)

Research highlights:

• A cellular automaton model using method of global restructuring on the growth and corrosion during the formation of the passive layer has been developed.

• A stochastic model, which combines the surface growth and internal oxidation, has been developed to explain the oxidation mechanism of steels in liquid lead alloys.

• Two conference papers have been accepted and will be presented in 2006 International Congress on the Advances in Nuclear Power Plants (ICAPP '06).

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Progress Report January 1-March 31, 2006, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The UNLV developed TRPSEMPro software package can access engineering modeling software, ASPEN Plus through its own interface. The new interface eliminates the user interaction with the complex ASPEN Plus package and also provides input and output results for analysis purpose. The current interface will keep improving on collecting multiple scenario runs and database population.

Two separation processes, acid and plutonium separations, are near completion. The unit operations were finished while some sensitive chemical data for certain species are unknown. Graduate student, Matthew Hodges, continues on finishing those processes using dummy values for those restricted variables. Once the processes complete, researchers …

Terrain And Spatial Effects On Hazard Prediction And Assessment Capability (Hpac) Software Dose-Rate Contour Plot Predictions As Compared To A Sample Of Local Fallout Data From Test Detonations In The Continental United States, 1945-1962, Kevin D. Pace

Theses and Dissertations

Hazard Prediction and Capability (HPAC) Software is validated by comparing modeled predictions to historical test data. Reanalysis weather data is acquired and reformatted for use in HPAC. Simulations are made using various amounts of weather data by use of a spatial domain. Simulations are also varied by levels of terrain resolution. The predicted output of the software is numerically compared to historical test data. The result of this research culminated in the knowledge that HPAC prediction accuracy is improved by using terrain resolutions beyond the flat earth assumption. Furthermore, this research establishes that domain size variation produces no significant advantage …

Neutron Multiplicity Measurements For The Afci Program Final Quarterly Progress Report January-March 2006, Denis Beller

Transmutation Sciences Physics (TRP)

This project was developed to test a Russian-built Neutron Multiplicity Detector System (NMDS) for measuring neutrons generated in a central target by a variety of accelerators. To assist in experiment design and evaluation, we use the most advanced high-energy radiation transport code, MCNPX, to model experiments. Experimental results are compared to computational predictions and discrepancies are investigated. Initial plans were to conduct experiments using a 70-MeV proton cyclotron at the Crocker Nuclear Laboratory at the University of California at Davis and/or a 20 to 40 MeV electron linac (linear accelerator) at the Idaho Accelerator Center (IAC) at Idaho State University …

Reactor Physics Studies For The Afci Race Project: Reactor-Accelerator Coupling Experiments Project: Quarterly Progress Report January-March 2006, Denis Beller

Transmutation Sciences Physics (TRP)

In the RACE Project of the U.S. Advanced Fuel Cycle Initiative (AFCI), a series of accelerator driven subcritical systems (ADSS) experiments is being conducted at the Idaho State University’s Idaho Accelerator Center (ISU-IAC) and at the University of Texas (UT) at Austin, and will be conducted at the Texas A&M University. In these experiments electron accelerators are used to induce bremsstrahlung photon-neutron reactions in heavy-metal targets; this source of 10¹⁰ to 10¹³ n/s initiates fission reactions in the subcritical systems. These systems include a compact, transportable assembly at ISU and TRIGA reactors at UT-Austin and Texas A&M. These …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix: Quarterly Report, January 2006 To March 2006, Kiel Steven Holliday, Thomas Hartmann, Kenneth Czerwinski

Fuels Campaign (TRP)

This project will examine inert matrix fuels containing ZrO₂ and MgO as the inert matrix, with the relative amount of MgO varied from 30% to 70% in ZrO₂. Reactor physics calculations will be used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf with reactor grade Pu providing the fissile component, with up to 10% of ²³⁹Pu. Ceramics will be synthesized and characterized based on the reactor physics results. The solubility of the fuel ceramics, in reactor conditions, reprocessing conditions, and repository conditions, will be investigated in a manner to …

Crystal Structure And Nano Structure Of Oxide-And Nitride Transmutation Fuel – Refinement Of Transmutation Fuel Processing For Surrogate And Radioactive Fuel Systems: Quarterly Report, January 2006 To March 2006, Chinthaka Silva

Fuels Campaign (TRP)

Transmutation-related research work at the National Laboratories, e.g. Los Alamos National Laboratory, is focused on mono-nitride ceramic fuel forms, and consists of closely coordinated “hot” actinide and “cold” inert and surrogate fuels work. Matrix and surrogate materials work involves three major components: (1) fuel matrix synthesis and fabrication, (2) fuel performance, and (3) fuel materials modeling. The synthesis and fabrication component supports basic material studies, as well as actinide fuel fabrication work through fuel fabrication process development.

This project, task 28, supports the TRP program by delivering structural data on surrogate and radioactive fuels. Crystal structure and nanostructures of the …

Nanometal Containing Nanocomposites And Photolithographic Polyaniline Nanofibers, Frank D. Blum, Sunil K. Pillalamarri, Lalani K. Werake, J. Greg Story, Massimo F. Bertino, Akira Tokuhiro

Chemistry Faculty Research & Creative Works

A report on recent progress from our laboratories on the nanostructures produced from novel synthesis techniques will be discussed. Using high-energy radiation (γ-rays) we have been able to produce conducting polymer nanofibers and nanorods of polyaniline and polypyrrole without the use of a separate template or capping agent. This technique has been extended, with the addition of metal ions, to a "one pot" synthesis, producing conducting nanocomposites. These nanocomposites contain metal nanoparticles which decorate the conducting nanofibers. We have also recently shown that these systems can be photopatterned to produce novel structures. We believe that these systems will be useful …

Synthesis And Properties Of Metallic Technetium And Technetium - Zirconium Alloys As A Radioactive Storage Waste Form To Stabilize The Technetium Waste Stream Of The Urex+1 Process, Frederic Poineau, Thomas Hartmann, Kenneth Czerwinski

Waste Forms Campaign (TRP)

In the AFCI program the UREX+1 process is proposed as one of the most promising technique to separate TRU (transuranic elements) form LWR spent nuclear fuel in the years to come. The application of UREX+1 results in good separation of the 5f-transuranics from the 4f-lanthanides, reduced waste volumes by eliminating the uranium content, and reduced waste package costs. Technetium-99 will be separated together with uranium and iodine within the first process steps. After the separation of uranium, technetium and iodine must be immobilized by their incorporation in a suitable waste storage form. Based on recent activities within the AFCI community, …

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2005 Through December 31, 2005, Anthony Hechanova

Publications (NSTD)

• Liquid Salt Technical Working Group Meeting. The first meeting of the Liquid Salt Technical Working Group was held on October 28, 2005 at the Pratt Whitney Rocketdyne facility in Canoga Park, CA. 20 experts from academia, industry, and national laboratories participated to discuss current state of knowledge and research needs for high temperature liquid salt applications.
• Nuclear Hydrogen Initiative Semi-annual Review. Several participants from the UNLVRF University Consortium gave technical presentations at the NHI Semi-annual Review meeting in Rockville, MD, November 9-10, 2005.
• Quarterly Collaboration Meeting. The University of Nevada, Las Vegas hosted a UNLVRF HTHX Project quarterly meeting December …

Hybrid Solar Cells From Water-Soluble Polymers, James T. Mcleskey Jr., Qiquan Qiao

Mechanical and Nuclear Engineering Publications

We report on the use of a water-soluble, light-absorbing polythiophene polymer to fabricate novel photovoltaic devices. The polymer is a water-soluble thiophene known as sodium poly[2-(3-thienyl)-ethoxy-4-butylsulfonate] or PTEBS. The intention is to take advantage of the properties of conjugated polymers (flexible, tunable, and easy to process) and incorporate the additional benefits of water solubility (easily controlled evaporation rates and environmentally friendly). The PTEBS polythiophene has shown significant photovoltaic response and has been found to be effective for making solar cells. To date, solar cells in three different configurations have been produced: titanium dioxide (TiO2) bilayer cells, TiO2 bulk heterojunction solar …

Why Renewables Need Nuclear?: A Brief Narrative, John Ratcliffe, Ruth Saurin

Articles

No abstract provided.

Cracking Of Martensitic Alloy Ep-823 Under Controlled Potential, Ajit K. Roy, M. K. Hossain

Mechanical Engineering Faculty Research

The susceptibility of martensitic Alloy EP-823 to stress corrosion cracking was evaluated with and without an applied cathodic potential using the slow-strain-rate (SSR) testing technique. The magnitude of the applied potential was based on the corrosion potential determined by cyclic polarization. The cracking susceptibility in an acidic environment at different temperatures was expressed in terms of the true failure stress (ơ_f), time to failure (TTF), and ductility parameters, including percent elongation (%El) and percent reduction in area (%RA). The data indicate that the magnitudes of ơ_r, TTF, %El, and %RA were reduced due to cathodic charging. …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix: Neutronic Evaluation Of Zro2-Mgo Inert Fuels, E. Fridman, A. Galperin, E. Shwageraus

Fuels Campaign (TRP)

Various fuel cycle concepts for plutonium incineration in existing PWR loaded with Inert Matrix Fuel (IMF), in which uranium is replaced by neutron-transparent inert matrix material, are currently under investigation at BGU. Some of the studied designs include ZrO₂-based IMF with annular fuel geometry and ZrO₂-MgO based IMF with the relative amount of MgO varied from 30v/o to 70v/o. These concepts are analyzed via detailed three-dimensional full core simulation of existing PWR including thermal-hydraulic feedback. The whole core simulations are carried out with the SILWER code. The SILWER code, which is a part of the ELCOS …

Decoupling And Disturbance Rejection Control For Target Circulation Loop, Xiuju Tan

Reactor Campaign (TRP)

The primary objective is to modify the existing control algorithm of the pilot target circuit (TC-1) loop to achieve precise temperature control. Safety concerns, the alarm system, and a user-friendly design are the secondary objectives.

The decoupling and active disturbance rejection controls are the effective control scheme in this special multivariable control process to TC-1 loop.

The research objectives are:

• To identify the interacting terms between heater inputs and target temperature outputs in each zone experimentally,

• To design of decoupling and active disturbance rejection control (ADRC),

• To monitor system through internet based remote monitoring, automatic alarming and …

Magnetohydrodynamic Simulation Of Electromagnetic Pump In Tc-1, Lillian J. Ratliff

Reactor Campaign (TRP)

The pilot molten lead-bismuth target circuit (TC-1) in university of Nevada Las Vegas (UNLV) was designed for beam power of 1 MW accelerator driven system (ADS). The TC-1 is a liquid lead-bismuth eutectic (LBE) circulation loop. Circulation of the liquid alloy is driven by an annular linear induction pump (ALIP). Experimental measurements of system parameters have yielded a surprisingly low pump efficiency of less than 1%. A numerical study of the pump efficiency is being conducted to determine which operational parameters are responsible for this low efficiency and to give insight into future EM pump design. The numerical study will …

University Of Nevada, Las Vegas Transmutation Research Program Annual Report Academic Year 2005-2006, Anthony Hechanova, Rebecca Arbour

Transmutation Research Program Reports (TRP)

It is my pleasure to present the UNLV Transmutation Research Program’s fifth annual report that highlights the academic year 2005 – 2006. Supporting this document are the many technical reports and scientific papers that have been generated over the past five years.

In the fifth year of our program, we saw amazing growth in the Radiochemistry Ph.D. program with a total of 12 students in the second year of the program (twice the number we anticipated in the program proposal). In the back of this issue, under Infrastructure Augmentation, you will find some news about the new academic programs sponsored …

Combined Radiation Detection Methods For Assay Of Higher Actinides In Separation Processes (Afci), Denis Beller, Warnick Kernan

Safeguards Campaign (TRP)

The ultimate objective of this project is to develop technology to detect and accurately measure quantities of higher actinides in processing systems without taking frequent samples. These systems include used fuel receipt, separations batches, and pipelines. A variety of measurements may be combined to calculate flow rates of actinide elements with a to-be-determined precision. Nuclear and decay characteristics of materials during processing will be acquired, conceptual designs of monitoring systems will be developed, radiation transport studies will be conducted to develop an understanding of operational regimes, and experiments will be performed to confirm performance. Radiation transport and scoping studies will …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Yingtao Jiang, Bingmei Fu

Transmutation Sciences Materials (TRP)

The research objectives of this project were as follows:

• To generate calibration curves of voltage versus oxygen concentration for the YSZ oxygen sensor system under various temperatures in liquid LBE.
• To determine the sensor characteristics of the YSZ sensor system.
• To determine oxygen dissolving rates in LBE under different temperatures in vitro.
• To study the effects of unwanted electrical conductivity, contributed by the mobility of the electrons at high temperatures, for more accurate oxygen measurement.
• To study alternative and promising oxygen measuring methods.

Corrosion Mechanisms And Kinetics Of Steels In Lead-Bismuth Eutectic: Quaterly Report, Allen L. Johnson, John Farley

Transmutation Sciences Materials (TRP)

A large number of studies of corroded samples were conducted using SEM, XPS, probe, and the TEM. Samples from the DELTA loop at LANL and from other sources were examined. Also, the investigation of 316 class stainless steel in LBE is continuing.

Corroded samples of D-9 steel have been in the process of being studies, which is a variant of 316 stainless steel that is optimized for resistance to swelling. The D-9 samples are notable for the process in which a localized failure of the protective oxide layer becomes widespread corrosion. The research group is examining the D-9 samples using …

Effect Of Silicon Content On The Corrosion Resistance And Radiation- Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

This task is primarily focused on the evaluation of the effect of Si content on the susceptibility of modified 9Cr-1Mo-0.24V steel to stress corrosion cracking (SCC) and localized cracking in both molten lead-bismuth eutectic (LBE) and an aqueous solution of acidic pH.

Further, significant efforts are in progress to characterize the deformation mechanism of modified T91 grade steel as a function of temperature and strain rate. Simultaneously, surface analyses of the tested materials are ongoing using state-of-the-art techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Corrosion Barrier Development For Lbe Corrosion Resistance: Quarterly Report (April 2006), Biswajit Das

Transmutation Sciences Materials (TRP)

As reported in the last quarterly report, synthesis of Cr nanowires was found to be problematic in terms of uniform coverage. Hence Ni was identified as the alternative metal to form the nanowires. The purpose of the metal nanowires is to provide structural integrity to the nanoporous alumina, as well as a second defense mechanism against corrosion by oxidizing in case the top alumina layer is compromised. Nickel was selected due to its established electrochemical synthesis procedure. While Ni can provide very good structural integrity to the porous alumina, one potential problem is its higher dissolution rate in LBE. However, …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive …

Neutron Multiplicity Measurements Of Target/Blanket Materials, Denis Beller

Transmutation Sciences Physics (TRP)

The U.S. Advanced Fuel Cycle Initiative (AFCI) is a program to develop economic and environmental methods to reduce the impact of waste from commercial nuclear fuel cycles. One concept for near-complete destruction of waste isotopes from used nuclear fuel is accelerator-driven transmutation. High-power accelerators would be used to produce high-energy charged particles, which then collide with heavy metal targets to create a cascade of neutrons. These neutrons then cause nuclear reactions in subcritical systems.

To design these systems, complex reactor physics computer codes and highly detailed data libraries are used to compute the reactivity of systems, reaction rates, destruction rates, …

Reactor Physics Studies For The Afci Reactor-Accelerator Coupling Experiments (Race) Project, Denis Beller

Transmutation Sciences Physics (TRP)

The specific research objective of this three-year project is to design and conduct an accelerator driven experiment. This experiment will help demonstrate in the U.S. the ability to design, compute, and conduct ADSS experiments; and to predict and measure source importance, coupling efficiency, sub-critical reactor kinetics and source-driven transients. In addition, databases will be created for both steady state and transient ADSS experiments for the nuclear community to develop and test new computational codes and methods, and the importance of a driving neutron source in various regions of different subcritical assemblies will be mapped. Experiments will be conducted and compared …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The overall goal of this project is the creation of a framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process packages, and TRPSEMPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the UNLV Nevada Center for Advanced Computational Methods.

The major objectives are the following:

• Develop a framework for simulating the Spent Fuel Treatment Facility (SFTF) process using AMUSE code, commercial process package, such as ASPEN-PLUS, and system engineering model.
• Develop a middleware package that can communicate between …

Second Generation Waste Package Design Study, Sam Armijo, Mano Misra

Publications (YM)

The design of waste packages currently proposed for YMP is highly conservative. The candidate materials of construction of the waste packages and drip shields while highly corrosion resistant are extremely expensive and components made from these materials will require complex and expensive fabrication methods to assure their integrity. A proposed, second generation operating concept and waste package design, is intended to permit more efficient and less costly operation of the repository while maintaining waste package integrity. Major reductions in waste package costs can be realized by increasing the number of fuel assemblies stored in each waste package, eliminating the reference …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 1st Quarterly Report, 2006, Clemens Heske

Fuels Campaign (TRP)

This project is devoted to an in-depth study of the chemical and electronic impact of metal fission products on the coating layers in TRISO nuclear fuel. In particular, there is a focus on the investigation of Pd, Cs, and Ag and their interface formation with SiC and carbon-based substrates. A variety of surface and near-surface bulk sensitive probes that investigate the occupied and unoccupied electronic states of the substrate and the metal overlayer have been utilized. By a controlled and stepwise deposition of the metal overlayer, it is possible to gain substantial insight into the formation of interfaces and their …