Nuclear Engineering Commons^™

Investigating The Corrosion Behavior Of Stainless Steel 316 In Static Lead Lithium Eutectic Under Applied Stressed Conditions, Daniel E. Levario

Nuclear Engineering ETDs

As fusion power moves closer to feasibility, identifying structural materials compatible with breeding blanket environments remains a critical challenge. Lead-lithium eutectic (LLE) is a leading candidate breeder and coolant material due to its low melting point and combined tritium breeding and neutron multiplication capability. However, the corrosive nature of LLE toward structural steels at elevated temperatures must be characterized before these systems can be reliably deployed. This study investigates the corrosion behavior of Type 316 stainless steel in static LLE under applied stress conditions at 550°C using C-ring stress corrosion specimens. Post exposure analysis via optical microscopy, SEM, EDS, and …

Microstructural Evolution Of Zirconium Diboride Irradiated With 5–10 Mev Au Ions At Room Temperature And 570 °C, Narrie Loftus, José Olivares, Miguel Crespillo, Esther Enríquez Pérez, Jeremy Watts, Eric W. Bohannan, Gregory Hilmas, William Fahrenholtz, Joseph Graham

Materials Science and Engineering Faculty Research & Creative Works

Zirconium diboride was irradiated with 5 MeV Au^2 + , 7 MeV Au⁴⁺ and 10 MeV Au³⁺ ions at room temperature and 570 °C to doses from 1 to 8 displacements per atom (dpa). Grazing incidence X-ray diffraction (GIXRD) analysis revealed no secondary phase formation. Rietveld analysis of the GIXRD data indicated an accumulation of microstrain at low dpa and room temperature. Dislocations observed in transmission electron microscopy (TEM) cross-sections are likely the main contributor to the microstrain. High dpa and high-temperature samples exhibit lower lattice distortion than lower dpa samples, suggesting the presence of enhanced defect …

Modeling Of Laser-Produced Plasma Plumes: Expansion, Chemistry, And Thin-Film Deposition, Edmund Tsiri Semaha, Edmund Tsiri Semaha

Theses and Dissertations

Abstract

Laser-assisted material processing involves coupled plasma expansion, chemical reactions, and particle transport that govern the quality of thin-film deposition. This dissertation presents a comprehensive computational investigation of these processes using the OpenFOAM framework. First, the performance of the twoPhaseEulerFoam (tPEF), rhoCentralFoam (rCF), and sonicFoam (sF) solvers is evaluated for modeling laser-produced plasma plume expansion under atmospheric conditions, demonstrating that tPEF accurately captures shock-wave propagation, hydrodynamic behavior, and multispecies interactions. Building on this validation, the reactingFoam (rF) solver is employed to investigate the chemistry of aluminum plasma expanding into an air environment (Al–N₂–O₂). The model incorporates appropriate thermodynamic, transport, and …

Improving Modeling Of Corrosion Products In The Primary Circuit Of Light Water Reactors Through The Experimental Determination Of Crud Characteristics, Sri Saravana Konganapuram Narasimma Bharathi

Electronic Theses & Dissertations (2024 - present)

High-temperature water flowing through the coolant circuits in pressurized water reactors (PWRs) creates a harsh environment, deteriorating these materials. This corrosion results in the formation of oxide layer(s) primarily composed of nickel ferrites, iron oxides, nickel oxides, and other nickel-iron-chrome spinel oxides. Being exposed to fluid with high flow rates and pressure, these oxide layers can be eroded, resulting in particulate fouling due to the release of corrosion products (Chalk River Unidentified Deposits, CRUD) into the coolant circuit. When CRUD subsequently deposits on fuel surfaces, it negatively affects the fuel performance (heat transfer and fuel failure); in addition, the particles …

Hafnium Oxide-Based Nanoheterostructures For Catalytic Radiosensitization And Enhanced X-Ray Radiotherapy, Marlen Dariela Calix Quezada

Theses and Dissertations

Orthovoltage X-ray beams are attractive for surface and intra-operative radiotherapy. Yet, their clinical utility is constrained by rapid attenuation and the limited dose that can be delivered without harming healthy tissue. High-Z hafnium oxide (HfO₂) nanoparticles can boost local energy deposition through the photoelectric effect, while catalytic surface defects accelerate water radiolysis. Harnessing both mechanisms in a single nano-heterostructure could enable potent radiosensitization at diagnostic-range energies.

This thesis develops and evaluates HfO₂-based nanoheterostructures, both bare and Au-decorated, as catalytic radiosensitizers.

Two types of HfO₂ were evaluated, one was synthesized following a specific route and the …

Advanced Air Preheater Sealing Systems For Enhanced Efficiency And Reliability In Thermal Power Plants, Pavan Kumar Ravulaparthy

Theses and Dissertations

Global electricity generation still relies heavily on thermal power plants, which consume vast amounts of fuel and emit significant amounts of carbon dioxide. A major but often overlooked source of inefficiency in these plants lies within the rotary regenerative air preheater (RAPH), a critical heat-exchange component where air leakage can exceed 20% in aging units. This leakage increases fuel consumption, parasitic fan power, and CO₂ emissions, while degrading boiler reliability.

This research introduces advanced adaptive sealing systems designed to mitigate these losses by dynamically compensating for rotor eccentricity, thermal distortion, and wear under harsh operating conditions. Brush seals, composed of …

Laser Ablation-Induced Corrosion Resistance For Molten Salt Equipment Materials Evaluated Utilizing Electrochemical And Spectroscopic Analysis, Peggy Milota

Theses and Dissertations

Advanced reactors and used nuclear fuel separation (i.e. pyroprocessing technology) utilize high temperature salt as a thermal storage medium as well as an ionic solution for electrochemical processes. The use of these aggressive molten chloride and fluoride mediums requires specific materials or additional system alterations to extend the lifetime and structural integrity of equipment due to corrosion. Some materials, in the presence of inherently impure salt, will corrode and form oxide films in a specific formation that decreases corrosion rate by electrochemically and physically preventing elemental movement to the material surface. This is referred to as a passivation layer. However, …

Development Of Group Iii-V Quantum Confinement-Enabled Detectors: Bias-Tunable Quantum Well Infrared Photodetector (Qwip) And Quantum Dot Scintillation Detector (Qdsd), Gyana R. Biswal

Electronic Theses & Dissertations (2024 - present)

This dissertation discloses the physics, fabrication, characterization, and analysis of two novel types of group III-V semiconductor detectors relying on quantum confinement of carriers, namely voltage-tunable quantum well infrared photodetectors (QWIP) and a high-yield ultrafast quantum dot scintillation detector (QDSD). Both QWIP and QDSD heterostructures presented here were grown on 3” GaAs (001) substrates using molecular beam epitaxy (MBE).

A major part of the dissertation focuses on development of the voltage-tunable QWIPs targeting detection in the mid-wave infrared region (MWIR) (3μm -5μm) and long-wave infrared region (LWIR) (8μm -12μm) with control of sensitivity by the applied bias. The QWIPs utilize …

Removal Capabilities Of Zeolite And Zero Valent Iron With High-Level Waste Tank Radionuclides And Metals: Cesium, Strontium And Chromium, Colette R. Towles

UNLV Theses, Dissertations, Professional Papers, and Capstones

High level nuclear waste (HLW) has been disposed for temporary storage in underground steel tanks at the Department of Energy Nuclear sites. For example, at the Hanford Site, WA, and Savannah River Site (SRS), SC, HLW account for eighty-eight million gallons (Mgal) and 450 million Curies (MCi) of radioactivity. In the early nuclear activity at Hanford, the waste was discharged to single-shell steel tanks, and the lack of secondary containment allowed leaks, contaminating soil and groundwater. Despite tremendous efforts to stabilize the liquid waste at nuclear sites, treatment is complex, costly, and time-consuming; therefore, HLW may have to be stored …

Laser Deposition Additive Manufacturing Of Multi-Material And Metal-Ceramic Composite Structures, Manikanta Grandhi

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing performance requirements of modern industrial systems, coupled with the imperative for decarbonization, necessitate a fundamental rethinking of metallic component design and manufacturing. Traditional materials, with their inherent limitations in property optimization, susceptibility to degradation, and weight constraints, are proving insufficient. Multi-material joining offers a potential solution, enabling designers to strategically integrate diverse materials with specific, tailored properties into single component. Functionally graded materials (FGMs) and oxide dispersion strengthened (ODS) materials are prime examples of this approach, delivering substantial improvements in wear resistance, thermal regulation, high-temperature resilience, and overall weight efficiency. However, conventional manufacturing approaches further exacerbate the limitations …

Physical Properties Of Copper Niobium Nanolamellar Composites Fabricated By Accumulative Roll Bonding, Jared Justice

Nuclear Engineering ETDs

Nanolamellar composites with high interface density have increased strength due to interfaces serving as barriers to dislocation movement and high radiation damage resistance. However, these interfaces also serve as barriers to electron motion, reducing the electrical resistivity and thermal conductivity. This work seeks to understand the inherent tradeoff between strength and physical properties of nanolamellar composites produced by accumulative roll bonding with layer thickness ranging from 25 nm to 193 nm. The electrical resistivity was investigated over temperatures ranging from 2 K to 300 K. The effect of longitudinal rolling and cross rolling was also investigated. Electrical resistivity results were …

Radiation Exposure Calibration Of The Al2o3:C With Radium-226 And Cesium-137 Using The Osl Method, Selma Tepeli Aydin

All Theses

Optically stimulated luminescence (OSL) dosimetry was utilized to calibrate Al₂O₃:C powder dosimeters, available commercially as the nanoDot® from Landauer Inc., and compare the dosimeter response to radium-226 (²²⁶Ra) and cesium-137 (¹³⁷Cs). The signal from the OSL was quantified using a microSTARii^® OSL reader also produced by Landauer Inc. Dose-response curves were developed for ²²⁶Ra and ¹³⁷Cs experiments (5 dosimeters each) at thirteen absorbed doses. Individual dosimeter response was tracked by serial number. Linear regression analysis was performed to determine if there were significant differences between the intercepts of the …

Corrosion Related To The Nuclear Waste Containers, Ali Ebrahimzadeh Pilehrood

Corrosion Research

The disposal of nuclear waste is a demanding topic, and the existing methods, whether it is temporary storage in spent fuel pools or storage in geological repositories, both face the risk of corrosion-related problems. Any failure in these storage methods can potentially lead to the release of radioactive materials into the environment. To avert such catastrophic scenarios, people in the nuclear industry consistently monitor and maintain these storage facilities endlessly and attempt to improve the plans designed to store nuclear waste. Here, I will examine the nuclear waste management organization (NWMO) plan in Canada. Choosing an appropriate location for the …

Preparation Of High Entropy Titanite Pyrochlore And Radiation Stability Study, Adam Gootgeld

All Theses

Pyrochlore has been studied as a host phase for safe storage of radionuclides and exists naturally with long-term stability with good long-range order [1]. High entropy oxides show promising tunable properties that could demonstrate favorable bulk deposit of radioactive materials such as spent nuclear fuel (Uranium and other actinides). It is proposed that using high entropy oxides (HEOs) as the cation in this framework will shift the gibbs free energy so that radioactive nuclear waste will be stabilized for safe, long-term, eco-friendly storage. We have established a consistent method to fabricate high entropy titanite pyrochlores. In this study, ion beam …

Oh, My Darling Clementine: A Detailed History And Data Repository Of The Los Alamos Plutonium Fast Reactor, Hannah K. Patenaude, Franz J. Freibert

College of Sciences Graduate Student Research

The Los Alamos Plutonium Fast Reactor, Clementine, provided the first fast neutron spectrum using a metallic plutonium fuel system and liquid mercury coolant. Clementine is often mentioned in the history of fast, metal-fueled, or metal-cooled designs, with little public information regarding the specifications or timeline. This paper contains a synopsis of each report regarding the development, operation, experimental results, failures, and subsequent disassembly of Clementine to explore this unique reactor within the context of modern advanced reactor development.

Fast-, Light-Cured Scintillating Plastic For 3d-Printing Applications, Brian G. Frandsen, Michael Febbraro, Thomas Ruland, Theodore W. Stephens, Paul A. Hausladen, Juan J. Manfredi, James E. Bevins

Faculty Publications

Additive manufacturing techniques enable a wide range of possibilities for novel radiation detectors spanning simple to highly complex geometries, multi-material composites, and metamaterials that are either impossible or cost prohibitive to produce using conventional methods. The present work identifies a set of promising formulations of photocurable scintillator resins capable of neutron-gamma pulse shape discrimination (PSD) to support the additive manufacturing of fast neutron detectors. The development of these resins utilizes a step-by-step, trial-and-error approach to identify different monomer and cross-linker combinations that meet the requirements for 3D printing followed by a 2-level factorial parameter study to optimize the radiation detection …

Angle Resolved Photoelectron Spectroscopy Study Of Germanium Tin: Experimentally Determined Electronic Band Gap And Surface Analysis, Jeremy M. Hunter

Theses and Dissertations

The germanium tin band gap is responsive to wavelengths in the mid to near infrared spectrum; this shows promise in meeting the detection demands of the next generation infrared detectors. Recent developments in germanium tin (GeSn) alloy growth techniques have peaked the scientific community’s interest in GeSn based optoelectrical and detection devices. Detection materials made entirely of group IV elements are compatible with complementary metal-oxide semiconductor manufacturing techniques. Understanding the surface chemistry of this alloy is fundamental for solid state device design and must be analyzed to optimize device performance. Studies have shown that with the addition of tin, the …

Radiation Shielding Effectiveness Of Hafnium Diboride (Hfb2) Reinforced Epoxy Composites For Enhanced Radiation Protection And Safety, Furkan Erdogan

Theses and Dissertations

This thesis investigates the radiation shielding effectiveness of hafnium diboride (HfB2) reinforced epoxy composites, with the aim of enhancing radiation protection and safety in various applications. The study focuses on the development and characterization of HfB2-epoxy composites with varying weight percentages of HfB2 nanoparticles, as well as on the evaluation of their shielding effectiveness against gamma rays and thermal neutrons. The radiation shielding performance of the composites is assessed using gamma-ray spectroscopy and neutron counting, and the neutron attenuation efficacy is compared with that of 5% borated high-dense polyethylene. The results indicate that the HfB2-epoxy composites exhibit promising radiation shielding …

First-Principles Study Of The Thermal Properties Of Zr2c And Zr2co, Yue Zhou, William Fahrenholtz, Joseph T. Graham, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

First-principles calculations of lattice thermal conductivities and thermodynamic properties of Zr2C and Zr2CO were performed using the quasi-harmonic approximation. Oxygen in the lattice gives Zr2CO higher bonding strength than Zr2C. Thus, the mechanical properties of Zr2C are enhanced when the vacancies in its crystal structure are filled with oxygen. Among the critical parameters that determine the lattice thermal conductivity, Zr2C has significantly higher Grüneisen parameters, thus Zr2C has lower lattice thermal conductivity than Zr2CO. In addition, Zr2CO has a higher heat capacity and thermal expansion coefficient than Zr2C at most temperatures. These results indicate that the addition of oxygen has …

Nuclear Fuel Cycle: Safe Management Of Spent Nuclear Fuel, Robert L. Sindelar

Journal of the South Carolina Academy of Science

The aim for storage of spent nuclear fuel (SNF) either in wet or in dry storage systems is to ensure general safety objectives are met throughout a desired storage period. Staff at the Savannah River National Laboratory (SRNL), in collaborations with partners at other national laboratories, industry research organizations, and the University of South Carolina (UofSC), have performed materials aging testing and analyses, and have established nuclear materials aging management programs to support extended periods of safe storage of research reactor (RR) SNF and of commercial power reactor (PR) SNF pending ultimate disposal. Several example challenges include susceptibility of aluminum …

Reactive Thin Film Polymers And Thin Film Composite Membranes For The Rapid Screening Of Uranium Isotopes, Abenazer W. Darge

All Dissertations

Traditional radiochemistry approaches for the detection of trace-level alpha-emitting radioisotopes in water require lengthy offsite sample preparations and do not lend themselves to rapid quantification. Therefore, a novel platform is needed that combines onsite purification, concentration, and isotopic screening with a fieldable detection system. My dissertation research objective was to develop novel reactive thin polymer films and thin film composite membranes for the selective separation of uranium from environmental water followed by direct isotopic analysis by alpha spectroscopy. Chapter 1 reviews progress made on uranium separation from aqueous matrices and discusses methods used for the determination of isotopic composition.

Chapter …

Electrochemical Impedance Spectroscopy Of Zirconium Oxidation For In-Situ Nuclear Sensing Applications, Michael Andrew Reynolds

Boise State University Theses and Dissertations

To meet the ever-growing energy demands of the modern world, alternative forms of producing power are necessary, and the field of nuclear engineering holds promise to answer this call. Nuclear fuel cladding in light water reactors (LWRs) currently draws a large amount of attention from scientists and researchers, as it provides many challenges to design around. Since the 1950s, zirconium and its protective oxide layer have been utilized as an effective material for the task, possessing good mechanical strengths, high corrosion resistance, and a low neutron absorption cross section. Despite these beneficial properties, however, fuel cladding remains vulnerable to several …

Towards Improving The Properties And Furthering Acceptance Of Advanced Technology Nuclear Fuels, Jennifer K. Watkins

Boise State University Theses and Dissertations

To avoid detrimental environmental impacts from climate change, the world community needs to push for the use of clean energy technologies. Development of proposed advanced technology nuclear fuels supports efforts to ensure nuclear energy is included as a non-carbon emitting source of electricity generation. Advanced technology nuclear fuels, also referred to as accident tolerant fuels (ATFs), have received renewed interest for use in the current nuclear reactor fleet as well as in advanced reactor technologies due to their high uranium loading, desirable thermophysical properties, and performance under irradiation as compared to the benchmark oxide fuel. A limiting consideration for the …

Analysis Of Microscopic Carbon Fiber Fragments, Zachary R. Scott

Theses and Dissertations

Carbon Fiber (CF) has different tensile strengths and transverse moduli depending on how they are fabricated. Some CF is export controlled as it can be used for weapons, spacecraft, or gas centrifuges for enriching nuclear fuel. This research project explored a new way to prepare micron sized single CF threads to measure their transverse modulus and compare the moduli of non-export controlled CF to that of an export controlled CF. Five total polyacrylonitrile (PAN) fibers were used in this project, one of which was an export controlled fiber.

Molten Salt Technologies For Advanced Nuclear Fuel Cycles And Molten Salt Reactors, Dimitris Killinger

Theses and Dissertations

This dissertation provides five topics—an assessment of different monitoring and analytical techniques often cited in the literature for molten salt systems and designs for nuclear engineering applications. First, we explored commonly used materials for quasi-reference electrodes in molten chloride salts. Second, the limitations of the electrochemical analysis known as cyclic voltammetry due to the concentration of uranium(III) present were being investigated. Third, we provided an experimental assessment on the development of a spectroelectrochemical cell for interrogating various spectroelectrochemical techniques, namely chronoabsorptometry and chronofluorometry, and their limitations due to the presence of uranium(III) ions. Fourth, a study on the corrosion resistance …

Effects Of Vacancies And Electron Temperature On The Electron Phonon Coupling In Cubic Silicon Carbide And Their Connection To The Inelastic Thermal Spike, Salah Al-Smairat

Doctoral Dissertations

“The electron-phonon interaction is an important interaction in many solids as it influences transport phenomena and related quantities such as the electrical and thermal conductivities, especially in nuclear and space applications. The importance of the electron-phonon interaction in primary damage production in 3C-SiC is the subject of this research.

The electron-phonon coupling factor was calculated using a hybrid Density Functional Perturbation Theory - Classical Electron Gas model. The coupling factor was calculated as a function of electron temperature in pristine and defective 3C-SiC, and relaxed defective cells. The electron-phonon coupling is found to depend strongly on the electronic temperature and …

Characterization Of Cermet Fuel For Nuclear Thermal Propulsion (Ntp), James Floyd Mudd

Masters Theses

“A manned flight to Mars is met with many technical challenges, not the least of which is the development of propulsion technology capable of moving a transit vehicle from Earth orbit to Mars orbit. NASA is investigating Nuclear Thermal Propulsion (NTP) as a way of reducing flight time and providing the option for a mid-mission abort. NTP, which uses a high temperature nuclear reactor to heat a propellant, requires advanced fuel materials capable of withstanding temperatures well in excess of 2000 K. Among the fuel options are ceramic metal (cermet) composites composed of refractory metals and Ultra-High Temperature Ceramics (UHTCs). …

Solid State Synthesis And Characterization Of Apatite Based Ceramic Waste Form For The Immobilization Of Radioactive Iodine, Md Imdadul Islam

LSU Doctoral Dissertations

The growing demand for nuclear power in the United States and worldwide is accountable for addressing the major concern of radioactive waste, involving the technical challenges of maintaining the nuclear fuel cycle and immobilizing high-level wastes for safe disposal in geological storage. The appropriate selection of waste forms for spent nuclear fuel such as fission products and radionuclides can be effective means for a feasible and sustainable nuclear fuel cycle. But highly volatile radionuclides such as iodine (129) are of specific concern due to its extraordinary long half-life (15.7 million years). Due to its poor solubility and high volatility at …

Accident Tolerant Fuels Claddings And The Evolution Of Their Surface Characteristics Under Critical Heat Flux, Rajnikant V. Umretiya

Theses and Dissertations

Enhanced Accident Tolerant Fuels (ATFs) systems for light water reactors require higher temperature oxidation resistance in steam environments than the current UO₂ – zirconium fuel system. Investigating the ATF materials’ surface properties is needed as they have evidenced to affect the Critical Heat Flux (CHF), which is an important parameter of the thermal-hydraulic performance required to provide safety margins. In this dissertation, the surface properties of FeCrAl alloys (APMT and C26M), Zircaloy-2, Zircaloy-4, and Cr-coating on Zircaloy-4 substrates produced by Physical Vapor Deposition (PVD) and Cold Spray (CS) were investigated according to their chemistry, topography, and wettability. The static …

Equations Of State For Warm Dense Carbon From Quantum Espresso, Derek J. Schauss

Theses and Dissertations

Warm dense plasma is the matter that exists, roughly, in the range of 10,000 to 10,000,000 Kelvin and has solid-like densities, typically between 0.1 and 10 grams per centimeter. Warm dense fluids like hydrogen, helium, and carbon are believed to make up the interiors of many planets, white dwarfs, and other stars in our universe. The existence of warm dense matter (WDM) on Earth, however, is very rare, as it can only be created with high-energy sources like a nuclear explosion. In such an event, theoretical and computational models that accurately predict the response of certain materials are thus very …