Forgoing Nuclear: Nuclear Power Plant Closures And Carbon Emissions In The United States, Luke Petach

Funded Scholarship

This paper examines the effect of nuclear power plant decommissioning on electricity generation and carbon emissions in the United States. Using data on nuclear reactor closures in the United States between 1993 and 2022 and data on state-level carbon emissions and electricity generation from the Energy Information Administration (EIA), this paper adopts a difference-in differences (DiD) approach to estimate the effect of nuclear decommissioning. Two-way fixed-effects (TWFE) DiD estimates suggest a nuclear plant closure increases annual state-level per capita carbon emissions between 6% and 8%. The increase in state-level carbon emissions is driven by a substitution toward fossil fuel electricity—particularly …

Assessing The Effectiveness Of Nuclear Security Training And Education In Ghana, Michael Nii Sanka Ansah, Boris Stepanov Pavlovich, Paul Atta Amoah, David Okoh Kpeglo, Simon Adu, Bright Kwame Afornu

International Journal of Nuclear Security

Growing attention is being given to nuclear power across several African countries, including in Ghana. The world is depending on nuclear energy as a reliable and efficient means of energy generation. Ghana as a country is developing nuclear energy; thus, equal attention must be directed toward nuclear safety and security. Ghana is gradually developing interest in and is devoting substantial required resources to educating and training on nuclear security to meet the standards required by international bodies. Institutions such as the Nuclear Safety and Security Centre and the School of Nuclear and Allied Sciences of the Ghana Atomic Energy Commission …

Helium-Air Mixing In Simulated Reactor Cavities Of Very High Temperature Reactors, Abdullah Abubakar

Dissertations and Theses

Abstract

Very High Temperature Reactors (VHTRs) and High Temperature Gas Reactors (HTGRs) are Generation IV gas reactors that promise to deliver high temperature process heat and efficient electricity for both industrial and commercial purposes. They have a high level of inherent passive safety making them a viable alternative to traditional water-cooled reactors. These helium gas-cooled reactors use graphite containing U-235 TRISO fuel particles in their core, as a moderator to slow down neutrons for fission chain reactions and for general core support. In the event of a primary circuit pipe break, the coolant gas escapes into the surrounding reactor cavity …

Diversifying Nuclear Technology: A Technical Analysis On Small Modular Reactors And Its Impact On Nuclear Energy Policy, Carolina Lugo Mejia, Marcos Lugo

Helm's School of Government Conference - 2021-2024

The energy policy debate in the United States has revolved around the diversification of energy sources while promoting advantageous economic profits. One drive for this has been the discussion of anthropogenic, environmental endangerment concerns (Vlassopoulous 2011, 104). However, despite the environmental concerns, the U.S. has for some time only relied on one type of energy source—fossil fuels. Fossil fuels are categorized as natural gas, coal, petroleum, and other gases responsible (U.S. Energy Administration 2019). Natural gas is responsible for 38.4%, coal for 23.4%, petroleum for 0.4%, and other gases for 0.3% of the U.S.’s electrical generation (U.S. Energy Administration 2019). …

Irradiation-Induced Nanocluster Evolution, Didier Ishimwe, Matthew J. Swenson, Janelle P. Wharry

The Summer Undergraduate Research Fellowship (SURF) Symposium

Oxide dispersion strengthened steel (ODS) and commercial ferritic-martensitic (F-M) alloys are widely accepted candidate structural materials for designing advanced nuclear reactors. Nanoclusters embedded in the steel matrix are key microstructural features of both alloy types. Irradiation from nuclear fusion and fission affects the morphology of these nanoparticles, altering the performance of the alloys and potentially decreasing their usable lifetime. Thus, it is important to understand the effect of irradiation on these nanoparticles in order to predict long-term nuclear reactor performance. It was found that the evolution of nanoclusters in each material is different depending on the experimental irradiation parameters. The …

Nuclear Insurance Subsidies Cost From Post-Fukushima Accounting Based On Media Sources, John Laureto, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Quantification of nuclear liability insurance is difficult without arbitrary liability caps; however, post-mortem calculations can be used to calculate insurance costs. This study analyzes the Fukushima (Daiichi) nuclear power plant disaster to quantify the cost per unit electricity ($/kWh) of nuclear energy from the lifetime of the plant after accounting for the true cost of the liability needed to cover the damages from the nuclear disaster determined from news reports. These costs are then compared to the cost of electricity currently paid by Japanese consumers, and then are aggregated to determine the indirect subsidy for nuclear power providers in both …

Safety Culture Monitoring: A Management Approach For Assessing Nuclear Safety Culture Health Performance Utilizing Multiple-Criteria Decision Analysis, James Harold Warren Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Nuclear power plants are among the most technologically complex of all energy facilities. This complexity reflects the precision needed in design, maintenance and operations to harness the energy of the atom safely, reliably and economically. Nuclear energy thus requires consistent, high levels of organizational performance by the highly skilled professionals who operate and maintain nuclear power plants (Nuclear Energy Institute [NEI], 2014, p. 1).

A key element for achieving consistent, high levels of performance in a nuclear organization is its safety culture. Nuclear safety culture is for an organization what character and personality is for an individual: a feature that …

The Challenges And Implications For Energy Education, Patrick A. Tebbe

Mechanical and Civil Engineering Department Publications

In March 2011, the Fukushima Daiichi Nuclear Power Station in Japan was hit by twin natural disasters of a 9.0 earthquake and a tsunami more than 10 meters high. The combination forced a shut down of the reactor and severed externally provided power. Backup generators and batteries, which at first functioned normally, were swamped and disabled by the tsunami waters. The subsequent loss of reactor core cooling led to rising temperatures that ultimately resulted in a partial melting of the fuel rods and several hydrogen explosions (produced by a steam-zirconium reaction). Eventually, the situation was brought under control, but not …

High Temperature Heat Exchanger Annual Report, Anthony Hechanova

Publications (NSTD)

Objectives

• Identify candidate materials for heat exchanger components.

• Test candidate materials for heat exchanger components.

• Design critical components in the interface between the reactor and hydrogen production plant and within the sulfur iodine thermochemical process.

• Fabricate prototypical components.

• Test prototypical components.

Nuclear Energy, Steve Kraft

Native American Forum on Nuclear Issues

Abstract:

-Why Nuclear Energy?

-The lesson of the last 20 years in U.S. electricity policy:

– Diversified fuel and technology portfolio is essential

– All fuels and technologies (nuclear, coal, natural gas, renewables, efficiency) have a legitimate role

-The challenge for the future:

– Preserving/restoring diversified portfolio

– Ensuring resource adequacy, particularly in competitive markets

-Expanded use of nuclear energy is part of the answer

– Integrated used fuel management supports nuclear competitiveness

Measurements Of 11B(P,P)11B And 11B(P,Alpha)8Be With Polarized Protons, Thomas Lewis

The Corinthian

The vector analyzing powers, Ay(theta, E), of the 11B(p,p)11B and 11B(p,alpha)8Be reactions were measured as a function of angle and energy as a part of a program to study the reaction 11B(p,alpha)2alpha. The experiment was performed at the Triangle Universities Nuclear Laboratory at Duke University, where the polarized proton beams between 100 nA and 600 nA with energies (Ep) of 2.65, 3.9, 4.0, 5.11, and 5.5 MeV were produced using the ABPIS source and the FN tandem. These energies were selected to be on (and off) several of the known resonances in this region. The target was composed of 35 …

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2007 Through September 30, 2007, Anthony Hechanova

Publications (NSTD)

• Ceramatec Sulfuric Acid Decomposer. The numerical model of a SiC ceramic coupon with two layers of microchannels was developed. Calculations of the factor of safety and probability of failure for the case of a straight channel were performed. Results for a pressure of 7.5 MPa were performed. The thermal and mechanical stress analyses of the Ceramatec HTHX and decomposer were completed.

• Bayonet Heat Exchanger. The thermal and mechanical stress analyses of the bayonet type HTHX and decomposer (Sandia design) were completed. Temperature profiles obtained from thermocouples measured from the Sandia experiments have been applied to the whole packed …

Unlv Research Foundation High Temperature Heat Exchanger Development: 9/08, Anthony Hechanova

Publications (NSTD)

Barriers addressed:

Nuclear Hydrogen Initiative R&D Plan – Material performance and component design and testing for the intermediate heat exchanger and high-temperature thermochemical water splitting (H₂SO₄ decomposition and HI decomposition). Improved materials for High Temperature Electrolysis.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2007 Through June 30, 2007, Anthony Hechanova

Publications (NSTD)

• Ceramatec Sulfuric Acid Decomposer. Modeling with different reacting flow channel configurations (ribbed-surface channels, hexagonal channels, and diamond-shaped channels) was performed. The probability of failure for the one channel geometry with different reacting flow channel configurations was calculated to be zero in the three principal directions for all of the cases.

• Bayonet Heat Exchanger. The Matlab code for calculating the probability of failure using a two-dimensional axisymmetric model of the bayonet decomposer was developed. The probability of failure was calculated for the inner and outer SiC walls, and the intermediate quartz wall of the decomposer and found to be …

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2007 Through March 31, 2007, Anthony Hechanova

Publications (NSTD)

• The variation of sulfur dioxide production (throughput) of the baseline design of the Ceramatec sulfuric acid decomposer with total mass flow rate of reacting flow has been calculated. According to the calculations, the sulfur dioxide production increases as the total mass flow rate of reacting flow increases regardless of the fact that decomposition percentage of sulfuric trioxide decreases. A parametric study of the baseline design of the Ceramatec sulfuric acid decomposer was performed.

• The thermal performance using various channel geometries for the decomposer was studied. The baseline design (straight channels) has 89.5% thermal efficiency while the thermal efficiency …

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2006 Through December 31, 2006, Anthony Hechanova

Publications (NSTD)

Modifications to the single-channel models of the Ceramatec heat exchanger and decomposer concept for hexagonal flow channels under two values of layer-overlapping (50% and 100%) and for diamond-shaped flow channels were completed.

The finite element calculations of the “Ball on Three Ball Test” for ceramic material for the purpose of selecting the appropriate specimen thickness for future experimental testing was performed for plate thicknesses ranging from 2 to 8 mm.

A finite element model of the “Ball on Three Ball Test” was also studied for discs having micro-channels.

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2006 Through September 30, 2006, Anthony Hechanova

Publications (NSTD)

Hydrodynamics and thermal numerical modeling coupled with sulfur trioxide decomposition for the one channel geometry with three different channel configurations were performed. The results obtained from the numerical modeling were compared with the baseline design under the same boundary and operation conditions. The case with diamond shaped channels has the highest percentage of sulfuric acid decomposition. The baseline channel geometry has the lowest pressure drop compared with other cases.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2006 Through June 30, 2006, Anthony Hechanova

Publications (NSTD)

Numerical Analyses of the Ceramatec Sulfuric Acid Decomposer. Comparisons with experiments for the Ceramatec sulfuric acid decomposer coupon with eight straight channels for four different geometries and four different flow rates were performed. All of the operation and boundary conditions for the calculations were the same as in the Ceramatec experiments. Good agreement was found. The overall pressure drop difference between calculations and experiments for most of the cases is within 10%.

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2006 Through March 31, 2006, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. The UNLVRF HTHX Project quarterly meeting was held in Albuquerque, NM, March 16 and 17, 2006. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. A tour of Sandia National Laboratory was also provided that included a visit to their sulfuric acid decomposition test apparatus. There were 24 attendees from universities, national laboratories, and private industry. Collaborators discussed their research progress. The next meeting will be in July in Salt Lake City, UT.

Unlv Research Foundation High Temperature Heat Exchanger Development, Anthony Hechanova

Publications (NSTD)

Barriers addressed:

Nuclear Hydrogen Initiative R&D Plan – Material performance and component design and testing for: intermediate heat exchanger and high-temperature thermochemical water splitting (H2SO4 decomposition and HI decomposition). Improved materials for High Temperature Electrolysis.

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2005 Through December 31, 2005, Anthony Hechanova

Publications (NSTD)

• Liquid Salt Technical Working Group Meeting. The first meeting of the Liquid Salt Technical Working Group was held on October 28, 2005 at the Pratt Whitney Rocketdyne facility in Canoga Park, CA. 20 experts from academia, industry, and national laboratories participated to discuss current state of knowledge and research needs for high temperature liquid salt applications.
• Nuclear Hydrogen Initiative Semi-annual Review. Several participants from the UNLVRF University Consortium gave technical presentations at the NHI Semi-annual Review meeting in Rockville, MD, November 9-10, 2005.
• Quarterly Collaboration Meeting. The University of Nevada, Las Vegas hosted a UNLVRF HTHX Project quarterly meeting December …

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2005 Through September 30, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. The University of California, Berkeley, hosted a UNLVRF HTHX Project quarterly meeting on September 12. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators discussed their research program plan and provided an update on their progress. The next meeting will be in December in Las Vegas, NV hosted by UNLV.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2005 Through June 30, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. General Atomics hosted a UNLVRF HTHX Project quarterly meeting on June 5 in San Diego, California. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators had the opportunity to discuss their research program plan and update their progress. The next meeting will be in September in Berkeley hosted by UC Berkeley.

HTHX Computational Design (UNLV). Work on optimizing the ceramic offset strip in compact HTHX design through parametric studies was performed and completed. A simple single channel model was used to perform parametric studies on dimensions and flow …

High Temperature Heat Exchanger Project:Quarterly Progress Report January 1, 2005 Through March 31, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. Ceramatec, Inc. hosted a UNLVRF HTHX Project quarterly meeting on March 17 in Salt Lake City, Utah. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators had the opportunity to discuss their research program plan and update their progress. The next meeting will be in June in San Diego City hosted by General Atomics.

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2004 Through September 30, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted a meeting on NHI Materials and Heat Exchanger Design on Monday, May 17. Paul Pickard (Sandia National Lab) and Bill Corwin (Oak Ridge National Lab) facilitated the meeting. The purpose of the meeting was to summarize the hydrogen materials and heat exchanger requirements and priorities for UNLV staff and their collaborators to support the research proposal solicitation for the UNLV Research Foundation HTHX program. Attendance was heavier than anticipated and required a change of venue to accommodate the crowd of over 30.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2004 Through June 30, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted a meeting on NHI Materials and Heat Exchanger Design on Monday, May 17. Paul Pickard (Sandia National Lab) and Bill Corwin (Oak Ridge National Lab) facilitated the meeting. The purpose of the meeting was to summarize the hydrogen materials and heat exchanger requirements and priorities for UNLV staff and their collaborators to support the research proposal solicitation for the UNLV Research Foundation HTHX program. Attendance was heavier than anticipated and required a change of venue to accommodate the crowd of over 30.

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2004 Through March 31, 2004, University Of Nevada, Las Vegas. Research Foundation, Robert F. D. Perret

Publications (NSTD)

Mutually satisfactory language has been developed to permit signing of a subcontract between the General Atomics Corporation and the UNLV Research Foundation. The contract is signed.

High Temperature Heat Exchanger Project (Hthx) Project Quarterly Report, University Of Nevada, Las Vegas. Research Foundation

Publications (NSTD)

On October 24, 2003, the University of Nevada, Las Vegas (UNLV) hosted an all-day HTHX Kickoff Meeting attended by all participating institutional representatives and researchers. Objectives of this meeting were to identify near-term research objectives, coordinate collaborative activities, and identify required urgent action items.

Development Of Advanced High Temperature Heat Exchangers: Proposal, University Of Nevada, Las Vegas. Research Foundation

Publications (NSTD)

A research team led by the University of Nevada, Las Vegas (UNLV) Research Foundation proposes a project to develop advanced high temperature heat exchangers (HTHX) for hydrogen production and electrical energy conversion from advanced nuclear reactor concepts. This project will also support the development of Generation IV reactors. The research team includes researchers from UNLV, General Atomics (GA), Sandia National Laboratories (SNL), The University of California, Berkeley UCB) and Oak Ridge National Laboratory (ORNL).

The proposed project will be administered by the University of Nevada Las Vegas Research Foundation (UNLVRF). UNLVRF will provide the overall contract administration and is the …

Parameter Study For Optimizing The Mass Of A Space Nuclear Power System Radiation Shield, Benjamin R. Kowash

Theses and Dissertations

A parameter study was conducted for a space nuclear reactor radiation shield. The focus of this research was to explore alternatives to current radiation shield designs to reduce the mass while maintaining the same shielding performance. MCNP4C was used to determine the parameters necessary to build an optimum shield. A design known as the split scatter shield offered some potential for reductions in shield mass. In theory, less material is required for this type of shield, which uses thin shield sections to scatter radiation away from the dose plane. The parameters for this shield design are the shield geometry, number …