Nuclear Engineering Commons^™

The Future Of Nuclear Security: A Medical Physicist’S Perspective, Katharine E. Thomson

International Journal of Nuclear Security

Planning for the future of nuclear security is a vital and complex task, requiring cooperation and contribution from many disciplines and industries. This diversity of expertise should include the medical sector, which faces many of the same challenges as the nuclear industry: controlling access to dangerous material, creating a strong security culture, cooperating with the wider world and engaging the public.

Medical physicists, of which the author is one, oversee all aspects of small-scale radiation use. This paper discusses three key areas increasingly important to both medical and nuclear uses of radioactive materials: public engagement, prevention of nuclear and radiological …

The Future Of Nuclear Security In Moroccan Territory After The Creation Of The New Moroccan Agency Of Nuclear And Radiological Safety And Security: Opportunities And Challenges, Amal Touarsi, Amina Kharchaf

International Journal of Nuclear Security

Nowadays, a security regime for protecting nuclear and radiological material—providing an intelligent national regulatory institution and establishing national security laws—is necessary in order for a state to ensure security of nuclear and radiological materials used within its borders.

This paper focuses on discussing the opportunities and challenges facing the future of nuclear security after the creation of the new Moroccan Agency of Nuclear and Radiological Safety and Security.

Assessing And Enhancing Nuclear Safety And Security Culture For Small Facilities That Handle Radioactive Material, Solymosi Máté

International Journal of Nuclear Security

The use of radioactive sources is expanding all over the world and abreast the necessity of the enhancement of its safe and secure application is increasing too. In the nuclear industry, the safety and security are top priorities since decades. They share the same goal, to protect humans from the negative affect of the ionizing radiation. The human component of them is a significant factor and technical solutions can protect us so far and thus the culture for safety and security become a major focus. On the other hand, there are still some contradiction between recommendations and international guidance of …

Solar System Battery Backups For Reactor Coolant Pumps During Electricity Outages Resulting From Natural Disasters, Md. Shamsul Huda Sohel

International Journal of Nuclear Security

In a nuclear power plant, its coolant system is major safety equipment. Coolant system failure causes several accidents in nuclear history. There are so many causes for coolant system failure. One of them is lack of electric power for coolant pumps. In typically NPP there is backup system for power redundancy. In this article, focus on reactor coolant system and its backup power when main grid lines failure. Here discuss about solar backup power for batteries and increases a safety lines for reactor coolant pumps. So, our main goal is providing a battery backup from reliable natural source and ensuring …

The Inverse Kinetics Method And Its Application To The Annular Core Research Reactor, Thomas A. Ball

Nuclear Engineering ETDs

The inverse kinetics method, is a method to calculate a reactor’s reactivity profile from its power profile. In this thesis, the reactivity profile corresponding to pulse operations of the Annular Core Research Reactor (ACRR) was sought. Of specific interest was the shutdown reactivity of the reactor following the pulse. This required accounting for delayed beryllium photoneutrons that are present in the ACRR in addition to U-235 delayed neutron precursors. The power profiles of the pulses were experimentally measured using a diamond photoconductive detector (PCD). Using the inverse kinetics equation, a computer code was written to numerically calculate the reactivity corresponding …

Evaluation Of Energy Released From Nuclear Criticality Excursions In Process Solutions, Corey Michael Skinner

Nuclear Engineering ETDs

Typically, the staff of a nonreactor nuclear facility or a processing facility involving nuclear material are not expected to have a strong technical background in nuclear criticality physics, as that is not the purpose of these sites, yet handle material with the potential to undergo a criticality excursion. Such excursions have occurred 22 times in the past, 21 of which involved an aqueous solution material. Therefore, it would be useful to have a general model capable of providing a quick estimation of the consequences of a criticality excursion in a processing plant. To this end, correlations developed utilizing experimental data …

Time-Of-Flight And Energy Loss Analysis On The Unm Fission Fragment Spectrometer, Shelby Fellows

Nuclear Engineering ETDs

The University of New Mexico spectrometer experimental work has been used to provide an event-by-event fission product measurement to aid in filling in the gaps in existing fission product yield data, as part of the Los Alamos National Lab Spectrometer for Ion Detection in Fission Research project (SPIDER) collaboration. This thesis examines the time-of-flight (TOF) component of the spectrometer towards improving the resolution of the system. Different thicknesses of TOF conversion foils were examined with alpha particles and fission fragments: 20, 55, and 100 µg/cm² carbon foils. For the thinnest carbon foil studied, a timing resolution of 160 ps …

Asymptotic Neutronic Solutions For Fast Burst Reactor Design, Edward L. Hobbs

Nuclear Engineering ETDs

Deterministic numerical methodologies for solving time-eigenvalue problems are valuable in characterizing the inherent rapid transient neutron behavior of a Fast Burst Reactor (FBR). New nonlinear solution techniques used to solve eigenvalue problems show great promise in modeling the neutronics of reactors. This research utilizes nonlinear solution techniques to solve for the dominant time-eigenvalue associated with the asymptotic (exponential) solution to the neutron diffusion and even-parity form of the neutron transport equation, and lays the foundation for coupling with other physics phenomena associated with FBRs.

High security costs and proliferation risks associated with Highly Enriched Uranium (HEU) fueled FBRs are the …

Nuclear Fusion As A Primary Energy Production Method, Joshua Eiswirth

Missouri S&T’s Peer to Peer

In this paper, the possibility of using nuclear fusion as a primary energy producer will be analyzed. A brief overview of nuclear fusion is given as well as the drawbacks of nuclear fusion today. The human species, need to find a more abundant and renewable means to produce energy, because the non-renewable resources relied on today will be completely used up in as little a 100 years. Nuclear fusion, if perfected, offers a reliable and extremely abundant energy source. With commercial nuclear fusion plants more energy would be available than ever before. While no efficient fusion reactor design exists today, …

Investigating Tantalum As A Plasma-Facing Component For Nuclear Fusion Reactors, Arvind Sundaram, Jitendra K. Tripathi, Theodore J. Novakowski, Ahmed Hassanein Ph. D.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Nuclear fusion is a potential source for producing unlimited environment-friendly energy. Tungsten (W) is selected as the primary candidate material for plasma facing component in nuclear fusion reactors due to its high melting temperature (3695 K), low sputtering erosion yield and strong mechanical properties. However, recent investigations on W have confirmed that it undergoes severe surface morphology changes during low energy He plasma and/or ion irradiation similar to a harsh fusion environment. Additionally, our previous studies indicate that tantalum (Ta) may show better resistance to the harsh radiation environment and is therefore worthy of investigation. Hydrogen retention properties, specifically deuterium …

Temporal Resolution Of Cell Death Signaling Events Induced By Cold Atmospheric Plasma And Electroporation In Human Cancer Cells, Danielle M. Krug, Prasoon K. Diwakar, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cancer treatment resistance and their invasive and expensive nature is propelling research towards developing alternate approaches to eradicate cancer in patients. Non-thermal, i.e., cold atmospheric plasma (CAP) and electroporation (EP) applied to the surface of cancerous tissue are new methods that are minimally invasive, safe, and selective. These approaches, both independently and synergistically, have been shown to deplete cancer cell populations, but the signaling mechanisms of death and their timelines of action are still widely unknown. To better understand the timeframe of signaling events occurring upon treatment, human cancer cell lines were treated with CAP, EP, and combined CAP with …

Irradiation-Induced Nanocluster Evolution, Didier Ishimwe, Matthew J. Swenson, Janelle P. Wharry

The Summer Undergraduate Research Fellowship (SURF) Symposium

Oxide dispersion strengthened steel (ODS) and commercial ferritic-martensitic (F-M) alloys are widely accepted candidate structural materials for designing advanced nuclear reactors. Nanoclusters embedded in the steel matrix are key microstructural features of both alloy types. Irradiation from nuclear fusion and fission affects the morphology of these nanoparticles, altering the performance of the alloys and potentially decreasing their usable lifetime. Thus, it is important to understand the effect of irradiation on these nanoparticles in order to predict long-term nuclear reactor performance. It was found that the evolution of nanoclusters in each material is different depending on the experimental irradiation parameters. The …

Development Of An Unmanned Aerial System For Radiation Mapping In Nuclear Facilities, Jackson Ball, Guangying Jiang, Robert Bean

The Summer Undergraduate Research Fellowship (SURF) Symposium

Efficiently planning a decontamination and decommissioning (D&D) operation at a nuclear facility requires detailed information on the conditions present. In the wake of a disaster, or just years of abandonment, a facility’s layout may have dramatically changed, making previous facility drawings unreliable, and radioactive particles may have been spread over the site, contaminating equipment and structures. Rather than tasking workers with mapping and characterizing the contamination, which can take days or weeks and poses a health and safety risk to the workers, mapping the site and locating contamination can be done remotely by an unmanned aerial vehicle (UAV), which would …

Numerical Simulations Of Transcritical Natural Convection, Ruiwen Wei, Carlo Scalo, Mario Tindaro Migliorino, Kukjin Kim, Jean-Pierre Hickey

The Summer Undergraduate Research Fellowship (SURF) Symposium

In modern engineering applications, system overheating is a key issue that needs to be solved with efficient and reliable cooling technologies. Among the possible mechanisms that these are based on, natural convection cooling is one of the most frequently employed, with applications ranging from cooling of computer micro-components to large nuclear reactors. While many studies have been performed on natural convection employing supercritical or subcritical fluids, little attention has been given to fluids in their transcritical regime. The latter has the potential to yield high performances while avoiding detrimental effects of two-phase systems (e.g. cavitation). In the present study, 2D …

Verification Of Tfit Code Numerical Method For Flow Excursion Simulation, Patrick S. Foster, Subash Sharma, Martin L. Bertodano

The Summer Undergraduate Research Fellowship (SURF) Symposium

This research is aimed towards accurately modeling and predicting the onset of the two-phase flow excursion instability using the code TFIT (Two Fluid Interfacial Temperature). In order to do this we first had to show that the numerical diffusion of the code’s finite difference equations could be reduced to an insignificant level by decreasing the mesh size.

Understanding and being able to accurately model flow excursion can help us understand how to prevent the potential negative effects of this instability. We are using a two-fluid model with physics-based closure relations. The results will be validated against the experimental data available …

Comparison Of Pm-Hip To Cast Alloy 625 For Nuclear Applications, Alexander L. Bullens, Keyou Mao, Janelle P. Wharry, Esteban Bautista

The Summer Undergraduate Research Fellowship (SURF) Symposium

PM-HIP, or Powder Metallurgy and Hot Isostatic Pressing, metals have been a low cost alternative to forged and cast structural metals within various industries. The nuclear industry has recently developed interest in PM-HIP alloys, but further research needs to be done to quantify their mechanical properties and characterize the microstructure. Specifically, we must understand the mechanical and microstructural evolution of PM-HIP materials after long-term operation at the elevated temperatures that PM-HIP components will experience in service. We focus on Ni-base alloy Inconel 625, and compare the PM-HIP version to the cast version. Our methodology consists of annealing samples to various …

Electrical Characterization Of Irradiated Semiconducting Amorphous Hydrogenated Boron Carbide, George Glen Peterson

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Semiconducting amorphous partially dehydrogenated boron carbide has been explored as a neutron voltaic for operation in radiation harsh environments, such as on deep space satellites/probes. A neutron voltaic device could also be used as a solid state neutron radiation detector to provide immediate alerts for radiation workers/students, as opposed to the passive dosimetry badges utilized today. Understanding how the irradiation environment effects the electrical properties of semiconducting amorphous partially dehydrogenated boron carbide is important to predicting the stability of these devices in operation. p-n heterojunction diodes were formed from the synthesis of semiconducting amorphous partially dehydrogenated boron carbide on silicon …

Evaluation And Enhancement Of Clean Energy Systems: Analytical, Computational And Experimental Study Of Solar And Nuclear Cycles, Nima Fathi

Mechanical Engineering ETDs

Clean (and specifically renewable) energy is steadily improving its global share. However, finite availability of fossil fuels and the growing effects of climate change make it an urgent priority to convince the industry and governments to incentivize investment in the renewable energy field and to make it more attractive by decreasing the capital cost. Until recently, uncertainties in funding limited renewable energy development, especially in the US. That limitation has been one of the barriers to progress. Another limitation of many renewable energy systems is the variability in their output, which makes them unsuitable for baseline power production. Therefore, fossil …

Time And Energy Characterization Of A Neutron Time Of Flight Detector Using A Novel Coincidence Method For Constraining Neutron Yield, Ion Temperature And Liner Density Measurements From Maglif Experiments, Jedediah Styron

Nuclear Engineering ETDs

The focus of this work is the characterization of a typical neutron time-of-flight (NTOF) detector that is fielded on inertial confinement fusion (ICF) experiments conducted at the Z-experimental facility with emphasis on the Magnetized Liner Fusion (MagLIF) concept. An NTOF detector consisting of EJ-228 scintillator and two independent photomultiplier tubes (PMTs), a Hamamatsu-mod 5 and Photek-PMT240, has been characterized in terms of the absolute time and energy response. The characterization was done by measuring single, neutron-induced events in the scintillator by measuring the alpha particle and neutron produced from the D-T reaction in kinematic coincidence. The results of these experiments …

Examination Of Color Center Formation In Caf2 Crystals When Exposed To Gamma And Mixed Neutron/Gamma Fields, Sara M. Pelka

Nuclear Engineering ETDs

Color centers in CaF₂ were studied in this work, in parallel with examinations of changes in the refractive index of the crystals by the larger research group, after they were subjected to radiation. Color centers induced by gamma rays and in mixed neutron-gamma fields were studied in CaF₂ and LiF using transmittance and absorbance spectra. The goals were to examine both neutron and neutron-gamma mixed field irradiations to be able to isolate neutron only effects and to correlate these color center effects with refractive index effects studied by our larger collaboration. Irradiation sources include ¹³⁷Cs, DD and …

Nuclear Weapons In A Changing Climate: Probability, Increasing Risks, And Perception, Adam Liska, Tyler R. White, Eric Holley, Robert J. Oglesby

Adam Liska Papers

Many people tend to think that the outcome of any nuclear weapons use today will result in an escalatory situation with apocalyptic outcomes for the countries involved. Yet many factors are increasing the probability of the limited use of nuclear weapons (e.g., 1 to 20 warheads) in a range of conflict scenarios. Previous atmospheric model simulations of regional nuclear conflicts employing many relatively small bombs have been estimated to cause a global “nuclear autumn,” with great reductions in agricultural productivity, stratospheric ozone loss, and spread of hazardous radioactive fallout. The totality of these effects would result in widespread damage …

High Precision Refractive Index Measurement Techniques Applied To The Analysis Of Neutron Damage And Effects In Caf2 Crystals, Joseph P. Morris Ph.D.

Nuclear Engineering ETDs

Neutron irradiation damages material by atomic displacements. The majority of these damage regions are microscopic and difficult to study, though they can cause a change in density and thus a change in refractive index in transparent materials. This work utilized CaF₂ crystals to track refractive index change based on neutron radiation dose. High precision refractive index measurements were performed utilizing a nested-cavity mode-locked laser where the CaF₂ crystal acted as a Fabry-Pérot Etalon (FPE). By comparing the repetition rate of the cavity and the repetition rate of the FPE, refractive index change was determined. Following several irradiation experiments, …

Initiating Event Analysis Of A Lithium Fluoride Thorium Reactor, Nicholas Charles Geraci

Engineering Management & Systems Engineering Theses & Dissertations

The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR.

Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by …

Identification Of Key Drivers For Municipal Utility Performance, Jasmin Alsaied

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

This report explores the various performance indicators for municipal electric utilities and the greatest impact financial investments can make for improving these indicators. A literature search provided key detail about performing an analysis that would prove useful to utilities. The analysis identifies key performance indicators that allowed for the most prudent of investments. Data mining techniques and statistical analyses were performed on data sets concerning the 51 North Carolina municipal electric utilities to identify several key ratios and performance indicators that have the greatest impact on cost of service, system reliability, and customer satisfaction. Statistical analyses were used to determine …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Computer Simulation Of Pore Migration Due To Temperature Gradients In Nuclear Oxide Fuel, Ian Wayne Vance

Graduate Theses and Dissertations

A phase-field simulation model is being presented that captures the thermal-gradient-driven migration of pores in oxide fuel associated with fuel restructuring. The model utilizes a Cahn-Hilliard equation supplemented with an advection term to describe the vapor transport of fuel material through the pore interior due to gradients in vapor pressure. In addition, the model also captures changes in a migrating pores’ morphology. Simulations demonstrate that the model successfully predicts pore migration towards the hottest portion of the fuel, the centerline. The simulations also demonstrate changes in pore shape that are in agreement with previous experimental observations. Initially isotropic pores are …

Numerical Simulation Of Metallic Uranium Sintering, Bruce Berry

Graduate Theses and Dissertations

Conventional ceramic oxide nuclear fuels are limited in their thermal and life-cycle properties. The desire to operate at higher burnups as is required by current utility economics has proven a formidable challenge for oxide fuel designs. Metallic formulations have superior thermal performance but are plagued by volumetric swelling due to fission gas buildup. In this study, we consider a number of specific microstructure configurations that have been experimentally shown to exhibit considerable resistance to porosity loss. Specifically, a void sizing that is bimodally distributed was shown to resist early pore loss and could provide collection sites for fission gas buildup. …

Fast Neutron Detection In Nuclear Material Photofission Assay Using A 15 Mev Linear Electron Accelerator, Matthew Steven Hodges

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to use a 15 MeV (K15 model by Varian) linear electron accelerator (linac) for the photon assay of special nuclear materials (SNM). First, the properties of the photon radiation probe were determined. The stochastic radiation transport code, MCNP5, was used to develop computational models for the linac. The spectral distribution of photons as well as dose rate contour maps of the UNLV accelerator facility were computed for several linac operating configurations. These computational models were validated through comparison with experimental measurements of dose rates.

The linac model was used to simulate the photon interrogation …

Analysis Of The Temporal Response Of Coupled Asymmetrical Zero-Power Subcritical Bare Metal Reactor Systems, Kimberly Lynn Klain

UNLV Theses, Dissertations, Professional Papers, and Capstones

The behavior of symmetrical coupled-core systems has been extensively studied, yet there is a dearth of research on asymmetrical systems due to the increased complexity of the analysis of such systems. In this research, the multipoint kinetics method is applied to asymmetrical zero-power, subcritical, bare metal reactor systems. Existing research on asymmetrical reactor systems assumes symmetry in the neutronic coupling; however, it will be shown that this cannot always be assumed. Deep subcriticality adds another layer of complexity and requires modification of the multipoint kinetics equations to account for the effect of the external neutron source. A modified set of …

Applications Of Elpasolites As A Multimode Radiation Sensor, Amber Lynn Guckes

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study consists of both computational and experimental investigations. The computational results enabled detector design selections and confirmed experimental results. The experimental results determined that the CLYC scintillation detector can be applied as a functional and field-deployable multimode radiation sensor.

The computational study utilized MCNP6 code to investigate the response of CLYC to various incident radiations and to determine the feasibility of its application as a handheld multimode sensor and as a single-scintillator collimated directional detection system. These simulations include:

• Characterization of the response of the CLYC scintillator to gamma-rays and neutrons;

• Study of the isotopic enrichment of …