Signal Processing Commons^™

Pseudo-Stereo Audio Processor, Zachariah David Bunce

Electrical Engineering

Due to both technical and resource limitations, non-professional audio production must often record with a single microphone, creating a mono audio signal. Even some originally multi-channel audio files often combine the separate channels into a single channel to save memory. However, this channel limitation makes any music held within the audio duller during listening. The Pseudo-Stereo Audio Processor remedies this situation, introducing a quadrature phase shift onto a given single-channel audio signal, producing multiple phase shifted output signals. These separate fixed-phase output signals are then recombined to produce a variable phase difference, emulated two-channel version of the input signal, allowing …

Portable Electrocardiogram Device And Signal Processing Design, Ryan F. Blaalid

Electrical Engineering

Full 12-lead electrocardiogram (ECG) measurements require inconvenient and time consuming adhesive electrode placement. This project proposes a design for a Bluetooth based ECG for remote patient measurement. The device is designed to measure up to 6-leads and utilizes 5 dry (non-adhesive) electrodes to accomplish this. The device delivers the ECG data to the user’s mobile smart phone and can then be sent to the patient’s doctor for analysis. Since the contact of the dry electrodes to the skin is not perfect, low-frequency noise called baseline wandering is introduced. A signal processing technique borrowed from image processing called morphological filtering is …

Underwater Remotely Operated Vehicle Controller With Pid Stability Regulation, Christian E. Aguirre

Electrical Engineering

The earth’s oceans and rivers remain widely unexplored. Hobbyists and companies across the globe invest money and resources into remotely operated vehicles (ROV) to further expand underwater knowledge. Each ROV includes a controller that operates motors and monitors other crucial system vitals. The ROV Controller project makes the process of designing an ROV simpler and more affordable by providing a multi-purpose programmable controller.

The ROV controller features programmable digital inputs/outputs and analog inputs. The controller processes control signals from analog joysticks, digital signals from a gyroscope and utilizes a MUX to expand the analog input capabilities of the Arduino. The …

Eeg Classification Using Residual Neural Networks, Eren Esener

Electrical Engineering

There is a growing desire to understand the EEG (electroencephalogram) signals related with brain activities. In order to analyze EEG signals, they first must be measured by sensors, which induces a lot of noise; then these signals are classified to understand the intended actions. In many cases a neural network is used as the algorithms for classification. A residual neural network (ResNet) is an artificial neural network (ANN) of a kind that are related with the pyramidal cells in the cerebral cortex. The goal of this work is to investigate the viability of ResNets for classifying EEG signals for hand …

Virtual Eye: A Spatial-Temporal Bottom-Up Eye Sensitivity Model, Todd Goodall

MODVIS Workshop

Video quality and compression models use the

spatial contrast sensitivity function (CSF), which is solved

based on a linear system approximation. This function measures

the eye’s sensitivity to sinusoid gratings, ignoring the subtle

connectivity and inhomogeniety of cell density across the

visual field. Non-linear aspects of the eye, such as the change

in frequency sensitivity with changing illumination, are not

captured by this simple approximation. We propose Virtual

Eye, a bottom-up approach that models the spatio-temporal

dynamics of the eye across the visual field. Each functional

retinal cell layer in the eye is modeled using non-uniform spatial

cell responses, which …

The Challenge For Vision Of Fluctuating Real-World Illumination, David H. Foster

MODVIS Workshop

No abstract provided.

A Model-Based Framework For The Smart Manufacturing Of Polymers, Santiago D. Salas Ortiz

LSU Doctoral Dissertations

It is hard to point a daily activity in which polymeric materials or plastics are not involved. The synthesis of polymers occurs by reacting small molecules together to form, under certain conditions, long molecules. In polymer synthesis, it is mandatory to assure uniformity between batches, high-quality of end-products, efficiency, minimum environmental impact, and safety. It remains as a major challenge the establishment of operational conditions capable of achieving all objectives together. In this dissertation, different model-centric strategies are combined, assessed, and tested for two polymerization systems.

The first system is the synthesis of polyacrylamide in aqueous solution using potassium persulfate …

An Unsupervised Channel Selection Method For Ssvep-Based Brain Computer Interfaces, Ethan Webster, Hadi Habibzadeh, Tolga Soyata

CURCE Annual Undergraduate Conference

Brain-computer interfaces (BCIs) provide an alternative communication channel for people with motor deficits that prevent normal communication. The underlying premise of a BCI is that a neuroimaging process such as electroencephalography (EEG) can be used to measure the user’s brain activity as signals. The obtained signals are analyzed to determine the user’s intended actions and a computer system can be used to replace voluntary muscle activity as a means of communication. The information transfer rate (ITR) of an algorithm used for determining the user’s intentions greatly affects the perceived practicality of the BCI system. Such algorithms are divided into two …

Design Of An Embedded Iris Recognition System For Use With A Multi-Factor Authentication System., Christopher David Hess

Electrical Engineering Undergraduate Honors Theses

This paper describes in detail the design, manufacturing and testing of an embedded iris scanner for use with a multifactor authentication system. The design process for this project included hardware design from part selection to board design to populating. Additionally, this process included the entirety of the software development, though the iris recognition process was largely based on other works. The functional requirements for the overall multi-factor authentication system were to have three authentication methods with a thirty second window to complete all three. The system acceptance accuracy was required to be greater than 75%. Those requirements therefore dictate that …

Receptive Fields Optimization In Deep Learning For Enhanced Interpretability, Diversity, And Resource Efficiency., Babajide Odunitan Ayinde

Electronic Theses and Dissertations

In both supervised and unsupervised learning settings, deep neural networks (DNNs) are known to perform hierarchical and discriminative representation of data. They are capable of automatically extracting excellent hierarchy of features from raw data without the need for manual feature engineering. Over the past few years, the general trend has been that DNNs have grown deeper and larger, amounting to huge number of final parameters and highly nonlinear cascade of features, thus improving the flexibility and accuracy of resulting models. In order to account for the scale, diversity and the difficulty of data DNNs learn from, the architectural complexity and …

A Silicon Germanium Cmos Linear Voltage Regulator For Wireless Agricultural Applications, Aminta Naidili Castillo Robles

Graduate Theses and Dissertations

This thesis presents the design, simulation and test results of a silicon germanium (SiGe) complementary metal-oxide-semiconductor (CMOS) linear regulator. The objective of the circuit is to power other analog devices regardless of the load current and input voltage changes. The application of this regulator is to be part of a project developing a miniaturized semiconductor platform that can be inserted into stems of crops in order to measure data inside the plant and then send it wirelessly to the user. The linear regulator was designed on a BiCMOS SiGe 0.13µm which is a GlobalFoundries process. It has been tested at …

Implementing Wifi Ax In Sdr, Elijah Barker

Senior Honors Theses

Both Carrier Sensing Multiple Access (CSMA) and Orthogonal Frequency Division Multiple Access (OFDMA) are vital techniques for WiFi radio operations. CSMA deals with decentralized sharing of the medium, and OFDMA deals with dividing up the channel into multiple smaller allocations of the channel to transmit data from multiple users simultaneously. OFDMA is a new multiple access scheme introduced in the upcoming IEEE 802.11ax standard. This paper details research with Dr. Bae in implementing portions of the upcoming 802.11ax standard using software defined radio. First, this paper provides in-depth setup information for the Wime Project and explains the Wime Project implementation …

An Underground Radio Wave Propagation Prediction Model For Digital Agriculture, Abdul Salam

Faculty Publications

Underground sensing and propagation of Signals in the Soil (SitS) medium is an electromagnetic issue. The path loss prediction with higher accuracy is an open research subject in digital agriculture monitoring applications for sensing and communications. The statistical data are predominantly derived from site-specific empirical measurements, which is considered an impediment to universal application. Nevertheless, in the existing literature, statistical approaches have been applied to the SitS channel modeling, where impulse response analysis and the Friis open space transmission formula are employed as the channel modeling tool in different soil types under varying soil moisture conditions at diverse communication distances …

Physical Layer Discrimination Of Electronic Control Units Using Wired Signal Distinct Native Attribute (Ws-Dnda), Rahn M. Lassiter

Theses and Dissertations

The Controller Area Network (CAN) bus is a communication system used in automobiles to connect the electronic components required for critical vehicle operations. These components are called Electronic Control Units (ECU) and each one exercises one or more functions within the vehicle. ECUs can provide autonomous safety features and increased comfort to drivers but these advancements may come at the expense of vehicle security. Researchers have shown that the CAN bus can be hacked by compromising authorized ECUs or by physically connecting unauthorized devices to the bus. Physical layer (PHY) device fingerprinting has emerged as one of the accepted approaches …

High Fidelity Satellite Navigation Receiver Front-End For Advanced Signal Quality Monitoring And Authentication, Andrew D. Braun

Theses and Dissertations

Over the last several years, interest in utilizing foreign satellite timing and navigation (satnav) signals to augment GPS has grown. Doing so is not without risks; foreign satnav signals must be vetted and determined to be trustworthy before use in military applications. Advanced signal quality monitoring methods can help to ensure that only authentic and reliable satnav signals are utilized. To effectively monitor and authenticate signals, the front-end must impress as little distortions upon the received signal as possible. The purpose of this study is to design, fabricate, and test the performance of a high-fidelity satnav receiver front-end for advanced …

Direct Path Interference Suppression And Received Signal Processing For Ofdm Passive Radar, Aileen Nundu

Theses and Dissertations

Passive bistatic radar (PBR) is a fairly active area of research due to the opportunities offered by the ability to use emitters of opportunity for target detection and tracking as well as Synthetic Aperture Radar (SAR) imaging. There is an increasing variety and availability of signals that can be exploited for passive radar and there is also the advantage of angular diversity offered by the bistatic geometry and the potential for stealth operations afforded a passive receiver. Notwithstanding its merits, PBR is complicated by the inevitable presence of Direct Path Interference (DPI) from the transmitter to the receiver, which can …

Uranium Dioxide Actinide Detection Device Support Design For Space Applications, Jennifer N. Ramos

Theses and Dissertations

Attention concerning the proliferation of nuclear weapons and materials has generated many research initiatives to detect, identify, and locate radiation emitted by actinides. In support of this effort, the `Fission Induced Neutron Detection of Nuclear Materials' (FIND'NM) program was established to comprise a joint effort to explore this issue. The objective also co-extends the Air Force Research Laboratory uranium dioxide (UO2) detection sample growth, characterization, and electrical interface research. AFIT's study accomplishes the design and fabrication of a space-tolerant PCB to support a UO2-based neutron detector. Further design considerations are made with the expectation of the platform to be inside …

Orthogonal Frequency Division Multiplexed Waveform Effects On Passive Bistatic Radar, Forrest D. Taylor

Theses and Dissertations

Communication waveforms act as signals of opportunity for passive radars. However, these signals of opportunity suffer from range-Doppler processing losses due to their high range sidelobes and pulse-diverse waveform aspects. Signals such as the long term evolution (LTE) encode information within the phase and amplitude of the waveform. This research explores aspects of the LTE, such as the encoding scheme and bandwidth modes on passive bistatic Doppler radar. Signal space-time adaptive processing (STAP) performance is evaluated and parameters are compared with the signal to interference-plus-noise ratio (SINR) metric.

Multi-Sensor Data Fusion Between Radio Tomographic Imaging And Noise Radar, Christopher Vergara

Theses and Dissertations

The lack of situational awareness within an operational environment is a problem that carries high risk and expensive consequences. Radio Tomographic Imaging (RTI) and noise radar are two proven technologies capable of through-wall imaging and foliage penetration. The intent of this thesis is to provide a proof of concept for the fusion of data from RTI and noise radar. The output of this thesis will consist of a performance comparison between the two technologies followed by the derivation of a fusion technique to produce a single image. Proposals have been made for the integration of multiple-input multiple-output (MIMO) radar with …

Interactive Simulations In Signals And Systems, Anthony Richardson

ASEE IL-IN Section Conference

Several interactive simulations that promote a better understanding of concepts traditionally encountered in an undergraduate Signals and Systems course are described. The simulations were developed to support the text “Signals & Systems: Theory and Applications” by Ulaby and Yagle. The text and all simulation programs are available for free download (ss2.eecs.umich.edu) as part of the Free Electrical Engineering Textbook Initiative from the University of Michigan.

All simulations use graphical control elements that allow the student to interact with the simulation. Many of the simulations use either real audio or image data so that the student can vary parameters of the …

Design Of A Low-Cost Data Acquisition System For Rotordynamic Data Collection, Gregory S. Pellegrino

Master's Theses

A data acquisition system (DAQ) was designed based on the use of a STM32 microcontroller. Its purpose is to provide a transparent and low-cost alternative to commercially available DAQs, providing educators a means to teach students about the process through which data are collected as well as the uses of collected data. The DAQ was designed to collect data from rotating machinery spinning at a speed up to 10,000 RPM and send this data to a computer through a USB 2.0 full-speed connection. Multitasking code was written for the DAQ to allow for data to be simultaneously collected and transferred …

Development Of A Myoelectric Detection Circuit Platform For Computer Interface Applications, Nickolas Andrew Butler

Master's Theses

Personal computers and portable electronics continue to rapidly advance and integrate into our lives as tools that facilitate efficient communication and interaction with the outside world. Now with a multitude of different devices available, personal computers are accessible to a wider audience than ever before. To continue to expand and reach new users, novel user interface technologies have been developed, such as touch input and gyroscopic motion, in which enhanced control fidelity can be achieved. For users with limited-to-no use of their hands, or for those who seek additional means to intuitively use and command a computer, novel sensory systems …

A Focal Plane Array And Electronics Model For Cmos And Ccd Sensors In The Afit Sensor And Scene Emulation Tool (Asset), Fernando D. Fernandez

Theses and Dissertations

Electro-optical and infrared (EO/IR) sensor models are useful tools that can facilitate understanding a system's behavior without expensive and time-consuming testing of an actual system. EO/IR models are especially important to the military industry where truth data is required but is sometimes impractical to obtain through experimentation due to expense or difficulties in procuring hardware. This work describes implementation of a focal plane array (FPA) model of charge-coupled device (CCD) and complementary metal-oxide semiconductor (CMOS) photodetectors as a component in the Air Force Institute of Technology (AFIT) Sensor and Scene Emulation Tool (ASSET). The FPA model covers conversion of photo-generated …

Deep-Turbulence Wavefront Sensing Using Digital Holography In The On-Axis Phase Shifting Recording Geometry With Comparisons To The Self-Referencing Interferometer, Douglas E. Thornton, Mark F. Spencer, Glen P. Perram

Faculty Publications

In this paper, we study the use of digital holography in the on-axis phase-shifting recording geometry for the purposes of deep-turbulence wavefront sensing. In particular, we develop closed-form expressions for the field-estimated Strehl ratio and signal-to-noise ratio for three separate phase-shifting strategies—the four-, three-, and two-step methods. These closed-form expressions compare favorably with our detailed wave-optics simulations, which propagate a point-source beacon through deep-turbulence conditions, model digital holography with noise, and calculate the Monte Carlo averages associated with increasing turbulence strengths and decreasing focal-plane array sampling. Overall, the results show the four-step method is the most efficient phase-shifting strategy and …

Improving Regional And Teleseismic Detection For Single-Trace Waveforms Using A Deep Temporal Convolutional Neural Network Trained With An Array-Beam Catalog, Joshua T. Dickey, Brett J. Borghetti, William Junek

Faculty Publications

The detection of seismic events at regional and teleseismic distances is critical to Nuclear Treaty Monitoring. Traditionally, detecting regional and teleseismic events has required the use of an expensive multi-instrument seismic array; however in this work, we present DeepPick, a novel seismic detection algorithm capable of array-like detection performance from a single-trace. We achieve this performance through three novel steps: First, a high-fidelity dataset is constructed by pairing array-beam catalog arrival-times with single-trace waveforms from the reference instrument of the array. Second, an idealized characteristic function is created, with exponential peaks aligned to the cataloged arrival times. Third, a deep …

Fall Detection Using Channel State Information From Wifi Devices, D.M Sameera Palipana

PhDs

Falls among the independently living elderly population are a major public health worry, leading to injuries, loss of confidence to live independently and even to death. Each year, one in three people aged 65 and older falls and one in five of them suffers fatal or non fatal injuries. Therefore, detecting a fall early and alerting caregivers can potentially save lives and increase the standard of living. Existing solutions, e.g. push-button, wearables, cameras, radar, pressure and vibration sensors, have limited public adoption either due to the requirement for wearing the device at all times or installing specialized and expensive infrastructure. …

Online Learning Of The Spatial-Temporal Channel Variation In Underwater Acoustic Communication Networks, Wensheng Sun

Dissertations, Master's Theses and Master's Reports

Influenced by environmental conditions, underwater acoustic (UWA) communication channels exhibit spatial and temporal variations, posing significant challenges for UWA networking and applications. This dissertation develops statistical signal processing approaches to model and predict variations of the channel and relevant environmental factors. Firstly, extensive field experiments are conducted in the Great Lakes region. Three types of the freshwater river/lake acoustic channels are characterized in the aspects of statistical channel variations and sound propagation loss, including stationary, mobile and under-ice acoustic channels. Statistical data analysis shows that relative to oceanic channels, freshwater river/lake channels have larger temporal coherence, higher correlation among densely …

Sniffing, Decoding And Decryption Of Gsm Signals Using Low Cost Hardware And Open-Source Software, Muhammad Talha Choudhry

Dissertations and Theses

We have participated in the creation of almost two terabytes of tables aimed at cracking A5/1, the most common ciphering algorithm used in GSM. Given 114-bit of known plaintext, we are able to recover the session key with a hit rate of 19%. The tables are expected to be unique as they provide the best coverage yet known to the authors and research workers and they are the first step in a real-world passive attack against GSM. An initial investigation and analysis into the air interface of GSM were performed, from both a theoretical and practical point of view. These …

Sensor Placement For Damage Localization In Sensor Networks, Fereshteh Firouzi

Theses and Dissertations

The objective of this thesis is to formulate and solve the sensor placement problem for damage localization in a sensor network. A Bayesian estimation problem is formulated with the time-of-flight (ToF) measurements. In this model, ToF of lamb waves, which are generated and received by piezoelectric sensors, is the total time for each wave to be transmitted, reflected by the target, and received by the sensor. The ToF of the scattered lamb wave has characteristic information about the target location. By using the measurement model and prior information, the target location is estimated in a centralized sensor network with a …

Effect Of Sensor Errors On Autonomous Steering Control And Application Of Sensor Fusion For Robust Navigation, Shuvodeep Bhattacharjya

Dissertations, Master's Theses and Master's Reports

Autonomous steering control is one the most important features in autonomous vehicle navigation. The nature and tuning of the controller decides how well the vehicle follows a defined trajectory. A poorly tuned controller can cause the vehicle to oversteer or understeer at turns leading to deviation from a defined path. However, controller performance also depends on the state–feedback system. If the states used for controller input are noisy or has bias / systematic error, the navigation performance of the vehicle is affected irrespective of the control law and controller tuning. In this report, autonomous steering controller analysis is done for …