Biological Engineering Commons^™

Retargeting The Clostridium Botulinum C2 Toxin To The Neuronal Cytosol, Benjamin J. Pavlik, Elizabeth J. Hruska, Kevin E. Van Cott, Paul H. Blum

Department of Chemical and Biomolecular Engineering: Faculty Publications

Many biological toxins are known to attack specific cell types, delivering their enzymatic payloads to the cytosol. This process can be manipulated by molecular engineering of chimeric toxins. Using toxins with naturally unlinked components as a starting point is advantageous because it allows for the development of payloads separately from the binding/translocation components. Here the Clostridium botulinum C2 binding/translocation domain was retargeted to neural cell populations by deleting its non-specific binding domain and replacing it with a C. botulinum neurotoxin binding domain. This fusion protein was used to deliver fluorescently labeled payloads to Neuro-2a cells. Intracellular delivery was quantified by …

Aconitic Acid, Glycerol And Cinnamic Acid Polyester Characterization For Bone Tissue Engineering, Katie Joanna Hogan

Honors Capstones

No abstract provided.

Inhibition Of Bacterial Growth And Prevention Of Bacterial Adhesion With Localized Nitric Oxide Delivery, Julia Osborne

Dissertations, Master's Theses and Master's Reports

Bacterial infections continue to be a problem at the site of an indwelling medical device, and over the years, various bacterial strains have become more resistant to current antibiotic treatments. Bacterial infection at an indwelling medical device can be dangerous and affect the performance of the medical device which can ultimately lead to the failure of the device due to bacterial resistance to treatment.

Nitric Oxide (NO) has been shown to possess antibacterial properties to prevent and inhibit bacterial growth. NO releasing coatings on indwelling medical devices could provide a reduction in bacterial infections that occur at the device site …

Microbubble Assisted Polyhydroxybutyrate Production In Escherichia Coli, Kadriye Innan, Fulya Ay Sal, Asif Rahman, Ryan J. Putman, Foster A. Agblevor, Charles D. Miller

Biological Engineering Faculty Publications

Background

One of the potential limitations of large scale aerobic Escherichia coli fermentation is the need for increased dissolved oxygen for culture growth and bioproduct generation. As culture density increases the poor solubility of oxygen in water becomes one of the limiting factors for cell growth and product formation. A potential solution is to use a microbubble dispersion (MBD) generating device to reduce the diameter and increase the surface area of sparged bubbles in the fermentor. In this study, a recombinantE. coli strain was used to produce polyhydroxybutyrate (PHB) under conventional and MBD aerobic fermentation conditions.

Results

In conventional …

Rational Design Of Rama-Labeled Nanoparticles For A Dual-Modaility, Light Scattering Immunoassay On A Polystyrene Substrate, Nathan D. Israelsen, Donald Wooley, Cynthia Hanson, Elizabeth Vargis

Biological Engineering Faculty Publications

Background: Surface-enhanced Raman scattering (SERS) is a powerful light scattering technique that can be used for sensitive immunoassay development and cell labeling. A major obstacle to using SERS is the complexity of fabricating SERS probes since they require nanoscale characterization and optical uniformity. The light scattering response of SERS probes may also be modulated by the substrate used for SERS analysis. A typical SERS substrate such as quartz can be expensive. Polystyrene is a cheaper substrate option but can decrease the SERS response due to interfering Raman emission peaks and high background fluorescence. The goal of this research is to …

Accessible Bioprinting: Adaptation Of A Low-Cost 3d-Printer For Precise Cell Placement And Stem Cell Differentiation, John A. Reid, Peter A. Mollica, Garett D. Johnson, Roy C. Ogle, Robert D. Bruno, Patrick C. Sachs

School of Medical Diagnostics & Translational Sciences Publications

The precision and repeatability offered by computer-aided design and computer-numerically controlled techniques in biofabrication processes is quickly becoming an industry standard. However, many hurdles still exist before these techniques can be used in research laboratories for cellular and molecular biology applications. Extrusion-based bioprinting systems have been characterized by high development costs, injector clogging, difficulty achieving small cell number deposits, decreased cell viability, and altered cell function post-printing. To circumvent the high-price barrier to entry of conventional bioprinters, we designed and 3D printed components for the adaptation of an inexpensive 'off-the-shelf' commercially available 3D printer. We also demonstrate via goal based …

A Collagen Based Tissue Engineered Heart Valve Shows Excellent Functionality And Remodelling After Dynamic Conditioning, Claire Brougham, Ricardo Moreira, Tanya J. Levingstone, Stefan Jockenhoevel, Petra Mela, Fergal J. O'Brien

Conference Papers

No abstract provided.

Midfield Rf Signal Detector, Dawei Zhang

Electrical Engineering

This project is part of a Master’s thesis which looks at alternative ways to measure blood glucose. The Master’s thesis uses mid-field signals in order to match impedance and therefore lose less power as they travel through flesh. The goal of this senior project is to build a receiver for those signals and give accurate RSSI (received signal strength indicator) measurements. Mid-fields were originally explored by Stanford professor Dr. Ada Poon [3] who used the signaling technique to recharge the batteries of deeply implanted devices. Devices implanted near the surface of the skin were able to have their batteries recharged …

Storage Of Round And Square Switchgrass Bales: Effect Of Storage Time And Fungal Inoculation On Saccharification Efficiency, Noaa Frederick

Graduate Theses and Dissertations

To produce fermentable sugars from lignocellulosic biomass feedstock, severe pretreatment conditions are needed (either high acid concentration, temperature, or retention times). High severities can produce toxic byproducts which inhibit enzymatic hydrolysis or fermentation. In order to reduce pretreatment severities (and thus increase enzyme and fermentation efficiency), the white-rot fungus Pleurotus ostreastus was seeded into square and round bales of Kanlow switchgrass (Panicum virgastum L.) and left in the field over a period of 9 month. The laccase producing fungus is believed to selectively degrade lignin, a common plant structural polymer, which can function as an enzymatic inhibitor. Samples were taken …

Compounds Released From Biomass Deconstruction: Understanding Their Effect On Cellulose Enzyme Hydrolysis And Their Biological Activity, Angele Djioleu

Graduate Theses and Dissertations

The effect of compounds produced during biomass pretreatment on cellulolytic enzyme was investigated. Liquid prehydrolyzates were prepared by pretreating switchgrass using 24 combinations of temperature, time, and sulfuric acid concentration based on a full factorial design. Temperature was varied from 140°C to 180°C; time ranged from 10 to 40 min; and the sulfuric acid concentrations were 0.5% or 1% (v/v). Identified products in the prehydrolyzates included xylose, glucose, hydroxymethylfurfural (HMF), furfural, acetic acid, formic acid, and phenolic compounds at concentration ranging from 0 to 21.4 g/L. Pretreatment conditions significantly affected the concentrations of compounds detected in prehydrolyzates. When assayed in …

Department Of Biological Systems Engineering Newsletter, Fall 2015

BSE Department Magazine

No abstract provided.

Bioengineered Cell Niche For Skeletal Muscle Regeneration, Nicole M. Whittern, Naagarajan Narayanan, Chunhui Jiang, Owen Jones, Jay Gilbert, Michael Whittern, Shihuan Kuang, Meng Deng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Skeletal muscles can self-repair minor strains, lacerations, and contusions; however, in cases of volumetric muscle lossand muscle degenerative diseases, tissue fails to regenerate. Current cell-based therapies, such as myoblast transplantation, have significant drawbacks of low survival rates and engraftment efficacy, mainly due to the absence of supportive cell microenvironment. Scaffolds that mimic the natural cell microenvironment provide a robust platform to support cell adhesion, migration, proliferation, and differentiation. Electrospinning is a versatile technology platform used for fabricating the fiber scaffold that mimics the extracellular matrix. Thus, we aim to reconstitute the cell microenvironment through development of aligned fiber scaffolds by …

A Novel Synthetic Yeast For Enzymatic Biodigester Pretreatment, Tianyu Tan, Mark S. Aronson, Arren Liu, Jill H. Osterhus, Melissa Robins, Suraj Mohan, Erich Leazer, Bowman Clark, Alexa Petrucciani, Katherine Lowery, James Welch, Casey Martin, Helena Lysandrou, Michael E. Scharf, Jenna Rickus

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lignin, a complex organic polymer, is a major roadblock to the efficiency of biofuel conversion as it both physically blocks carbohydrate substrates and poisons biomass degrading enzymes, even if broken down to monomer units. A pretreatment process is often applied to separate the lignin from biomass prior to biofuel conversion. However, contemporary methods of pretreatment require large amounts of energy, which may be economically uncompelling or unfeasible. Taking inspiration from several genes that have been isolated from termites and fungi which translate to enzymes that degrade lignin, we want to establish a novel “enzymatic pretreatment” system where microbes secrete these …

Proteoglycan Mimic Of The Glycocalyx To Treat Endothelial Dysfunction, Victoria Messerschmidt, Alyssa Panitch, James R. Wodicka

The Summer Undergraduate Research Fellowship (SURF) Symposium

Patients with kidney failure usually undergo hemodialysis, a process by which toxins produced by the body are filtered from the blood, in order to survive. The preferred form for vascular access is called an arteriovenousfistula (AVF), a surgically created connection between an artery and vein that is utilized to undergo dialysis. However, AVFs have a failure rate of 50-60%. One of the contributions to AVF failure is endothelial cell dysfunction and loss of glycocalyx, which allows neutrophils and other native cells into the media of the vessel, which causes an inflammatory response. Our lab addresses endothelial dysfunction by mimicking the …

Development Of A Novel Enzymatic Pre-Treatment For Lignocellulosic Biomass, Melissa Robins, Jenna Rickus

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biofuels, fuels derived directly from living matter, present a renewable and environmentally friendly alternative to petroleum based fuels. Bioethanol produced from low input energy crops or agricultural waste is a promising fuel source because it does not interfere with the human food supply chain and the ethanol produced can be blended with gasoline. These potential sources of bioethanol are not yet commercially viable due to a polymer called lignin present in the plant’s cell wall which impedes the conversion of cellulose to glucose and the eventual fermentation of glucose to ethanol. Developing new methods for the pretreatment of lignocellulosic biomass …

Harnessing Notch Signaling For Biomaterial Scaffold-Based Bone Regeneration, Helena P. Lysandrou, Chunhui Jiang, Naagarajan Narayanan, Shihuan Kuang, Meng Deng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bone fracture has recently become prevalent, especially with an increasingly aging population. Current bone grafts procedures, including autografts and allografts, are hindered by multiple factors, such as limited supplies and inconsistent bone healing. Scaffold-based bone tissue engineering emerges as a prospective strategy to aid in bone regeneration through delivery of growth factors such as bone morphogenic proteins (BMPs). However, the use of BMPs suffers from several drawbacks such as protein instability and immunogenicity. Therefore, there exists a great need for the development of novel therapies to promote bone healing. Notch signaling, a pathway critical for cell-fate determination has been shown …

Breast Cancer/Stromal Cells Coculture On Polyelectrolyte Films Emulates Tumor Stages And Mirna Profiles Of Clinical Samples, Amita Daverey, Karleen M. Brown, Srivatsan Kidambi

Department of Chemical and Biomolecular Engineering: Faculty Publications

In this study, we demonstrate a method for controlling breast cancer cells adhesion on polyelectrolyte multilayer (PEM) films without the aid of adhesive proteins/ ligands to study the role of tumor and stromal cell interaction on cancer biology. Numerous studies have explored engineering coculture of tumor and stromal cells predominantly using transwell coculture of stromal cells cultured onto coverslips that were subsequently added to tumor cell cultures. However, these systems imposed an artificial boundary that precluded cell−cell interactions. To our knowledge, this is the first demonstration of patterned coculture of tumor cells and stromal cells that captures the temporal changes …

Characterization And Performance Of Algal Biofilms For Wastewater Treatment And Industrial Applications, Maureen Kesaano

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study was carried out on algal biofilms grown using rotating algal biofilm reactors (RABRs) with the aim of: i) characterizing their growth in terms of photosynthetic activity and morphology ii) evaluating their performance as a wastewater treatment option and a feedstock for biofuels production, and iii) examining the algal-bacteria interactions.

A review of algal biofilm technologies currently employed in wastewater treatment processes was made to compare nutrient removal efficiencies, factors that influenced algal biofilm growth, and the different bioproducts generated from algal biomass. Consequently, research efforts were directed towards addressing pertinent issues identified in literature in order to optimize …

Capillary Electrophoresis For Analysis Of Aβ1-42 Adsorption And Photo-Crosslinking, Jennifer Lynn Kurtz

Graduate Theses and Dissertations

The accumulation of amyloid-beta (Aβ) oligomers is believed to be the driving force behind Alzheimer’s disease (AD) pathogenesis. Due to the metastable nature of Aβ oligomers, the knowledge of Aβ aggregation and accumulation is not well understood. Here, we use capillary electrophoresis (CE) and photo-induced crosslinking of unmodified proteins (PICUP) to learn about the aggregation of Aβ.

First, we explore the effect of capillary coating on Aβ1-42 protein loss using CE. The dynamic coatings tested were PHEA and 50 kDa, 2000 kDa, 5000 kDa, and 8000 kDa PEO. The covalent coating tested was PVA. The results indicated that 2000 kDa …

Multiphysics Modeling To Enhance Understanding Of Microwave Heating Of Food In Domestic Ovens, Jiajia Chen

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Nonuniform heating is the biggest issue in the microwave heating of prepared meals. Multiphysics based models are promising tools to improve microwave heating uniformity by properly designing the food product. However, limited availability of accurate temperature-dependent material properties, inadequate model prediction accuracy, and high computational power and complexity in model development are three gaps that greatly limited the application of these models in the food industry.

To fill in the gaps, firstly, we developed a multitemperature calibration protocol to measure temperature-dependent dielectric properties (dielectric constant and loss factor). The temperature-dependent dielectric and thermal (thermal conductivity and specific heat capacity) properties …

Synthesis, Functionalization, And Characterization Of Metallic And Organic Nanoparticles For Biomedical Applications, Christopher Brian Sylvester

Honors Capstones

No abstract provided.

A Pump Monitoring Approach To Irrigation Pumping Plant Performance Testing, William Merritt Mcdougall

Graduate Theses and Dissertations

Traditionally, irrigation pumping plants have been tested using an instantaneous appraoch, which tests performance parameters over a very short time interval. Using this method, the tester measures the necessary work and energy use parameters to calculate the desired pumping plant performance values. The primary limitation of this approach is its inability to determine the season long efficiency of an irrigation pumping plant.

A new approach to evaluating irrigation pumping plant performance is the use of pump monitoring systems which use high frequency, real-time data collection and telemetry to relay information directly from the pump to the user. This method of …

Transformation Of Swine Manure And Algal Consortia To Value-Added Products, Mahmoud A. Sharara

Graduate Theses and Dissertations

The swine production sector is projected to grow globally. In the past, this growth manifested itself in increased herd sizes and geographically concentrated production. Although economically sound, these trends had negative consequences on surrounding ecosystems. Over-application of manure resulted in water quality degradation, while long-term storage of manure slurries was found to promote release of potent GHG emissions. There is a need for innovative approaches for swine manure management that are compatible with current scales of production, and increasingly strict environmental regulations.

This study aims to investigate the potential for incorporating gasification as part of a novel swine manure management …

Design And Development Of Two Component Hydrogel Ejector For Three-Dimensional Cell Growth, Thomas Dunkle, Jessica Deschamps, Connie Dam

Honors Scholar Theses

Hydrogels are useful in wound healing, drug delivery, and tissue engineering applications, but the available methods of injecting them quickly and noninvasively are limited. The medical industry does not yet have access to an all-purpose device that can quickly synthesize hydrogels of different shapes and sizes. Many synthesis procedures that have been developed result in the formation of amorphous hydrogels. While generally useful, amorphous hydrogels exhibit limited capability in tissue engineering applications, especially due to their viscous properties. This endeavor aims to modulate the appropriate gelation parameters, optimize the injection process, and create a prototype that allows for the extrusion …

Selection Methods For Genetically-Modified T Cells: In Support Of Translational Therapy, David Rushworth

Dissertations and Theses (Open Access)

T cells are blood cells which organize the immune system of the host. These cells are necessary for the host to respond appropriately to threats from foreign organisms and cancerous growth. However, in the case of certain infections and cancer, T cells are unable to respond appropriately to a threat and establish immunity. This leads to disease when the infection or cancer is not sufficiently eliminated. On the other hand, T cells can lack tolerance for healthy tissue and perceive healthy tissue as infected. The ensuing over-reactive immune response also leads to disease. A delicate balance must exist between immunity …

Endothelialization Using Protein Substrates And Hydrogels For Aortic Valve Applications, Elizabeth A. Fontaine

All Theses

Aortic valve disease is currently the leading cause of cardiovascular morbidity in the United States.1 In 2003, approximately 290,000 patients required heart valve replacement and that number is estimated to continue to rise as the average age of the population continues to increase.2 However, the current valve replacement options have multiple limitations. Tissue engineering hopes to address these shortcomings by providing a viable valve that more closely mimics the native valve, structurally and functionally.3 An ideal valve replacement should contain endothelial and interstitial cells, with the ability to remodel the extra-cellular matrix. While tissue-engineered heart valves are not uncommon in …

Molecular Sensing And Imaging Of Human Disease Cells And Their Responses To Biochemical Stimuli, Lifu Xiao

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Advancement in microscopic and spectroscopic techniques could significantly improve our ability in the study and diagnosis of diseases. Especially, being able to image and detect human diseases at the cellular and molecular level allows people to diagnose diseases at early stages and to study the molecular mechanisms behind various diseases. Currently, histopathological techniques are most widely used for prognosis and diagnosis of human diseases. However, conventional histopathology requires a complex process of sample preparation, which limits the diagnostic efficiency of this technique. More importantly, it requires fixation of tissue or cell sample, making it unsuitable for the study of dynamic …

Microfabrication Of Electrochemical Analytical Devices For Detection Of Pathogen Species Dna And Toxic Metal Ions, Spencer Williams

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water quality is a crucial factor in determining the health of an environment, and in turn the health of all those living in the given environment. Early detection of potential hazards in source water used for drinking would help to avoid outbreaks of sickness and even death. Contaminants, found in contact and drinking water, having negative effects on human health may include pathogenic microorganisms, and metal ion pollutants such as lead or cadmium. Lead and cadmium were selected due to well-known electrochemical properties providing easy references for developing new detection devices. Current methods for detection of these contaminants are extremely …

Catalytic Fast Pyrolysis Of Whole Field Pennycress Biomass, Yonas Afewerki Kidane

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

To satisfy the energy demand of the ever-increasing world population as well as to prevent environmental pollution arising from the use of fossil fuels, an alternate source of energy has to be developed. Biomass has the potential to provide a renewable energy source that is inexpensive and environmentally friendly. Field pennycress (Thlaspi arvense L.), previously considered as a weed, has now been found to be an ideal source of bio-fuel production. The focus of this research was to produce upgraded bio-oil by a process known as catalytic fast pyrolysis. A characterization and a temperature degradation profile study helped to …

Anaerobic Co-Digestion Of Algal Biomass And A Supplemental Carbon Source Material To Produce Methane, Yousef Soboh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The demand on alternative energy is rapidly increasing because the reserves of conventional fuel are decreasing and their impacts on the environment are increasing.
Developing renewable energy sources should receive utmost attention. The production of biofuels like methanol, biodiesel, and methane from various kinds of abundant biomass represents a very attractive energy source that can reduce the dependence on conventional fossil fuels energy.

Since algae contains high amounts of nitrogen and low carbon content, this research focused on anaerobic fermentation of algae to produce methane by blending algae with a supplemental carbon source material, sodium acetate. This was done to …