Engineering Commons^™

An Artificial Neural Approach To The Decomposition Problem, Chandrashekar L. Masti

Electrical & Computer Engineering Theses & Dissertations

The goal of this thesis is to develop an artificial neural approach toward addressing the intractability involved with the decomposition problem. The search for the lattice of substitution property (s. p.) partitions essential to decompositions is cast into the framework of constraint satisfaction. An artificial neural network is developed to provide solutions by performing optimization of a mathematically derived objective function over the problem space. The issue of transitivity is verified to belong to a class of problems beyond the scope of solvability for conventional quadratic-order constraint satisfaction neural networks. A theorem is stated and proved establishing that third-order correlations …

Finite Element Analysis Of Structures With Constrained Viscoelastic Layer Damping, Yung Chen

Mechanical & Aerospace Engineering Theses & Dissertations

It has been demonstrated that constrained viscoelastic layer damping treatments provide an effective means of passive control for structural vibration. These treatments dissipate vibrational energy by inducing shear strain in a thin layer of viscoelastic material. Our interest is in adding passive damping to a structure as an augmentation to active control. For such applications it is desirable to achieve high damping performance in a given frequency range with a minimum of added weight. Most damping treatments employ spatially continuous constraining layers over the entire viscoelastic layer. Plunkett and Lee have shown that the effectiveness of the damping treatment can …

Investigation Of Mixing Characteristics Of A Lox Injector Operating At Non-Ideal Thermodynamic Conditions, W. Wei

Mechanical & Aerospace Engineering Theses & Dissertations

The mixing characteristic of a liquid oxygen (LOX) injector operating under nonideal thermodynamics conditions are analyzed. Oxygen, in supercritical state, is injected into a high pressure airstream flowing through a narrow annulus region of a hypersonic wind tunnel. The objective of the present study is to investigate conditions that would help produce a uniform profile of oxygen concentration at the end of a diverging mixing channel, located downstream of the injector section. Uniformity of oxygen concentration profile is critical to combustion processes that occur downstream of the LOX injector section.

The coupled velocity, temperature, oxygen concentration and enthalpy fields are …

A Comparative Study Of Spectral Peaks Versus Global Spectral Shape As Invariant Acoustic Cues For Vowels, Amir Jalali Jagharghi

Electrical & Computer Engineering Theses & Dissertations

The primary objective of this study was to compare two sets of vowel spectral features, formants and global spectral shape parameters, as invariant acoustic cues to vowel identity. Both automatic vowel recognition experiments and perceptual experiments were performed to evaluate these two feature sets. First, these features were compared using the static spectrum sampled in the middle of each steady-state vowel versus features based on dynamic spectra. Second, the role of dynamic and contextual information was investigated in terms of improvements in automatic vowel classification rates. Third, several speaker normalizing methods were examined for each of the feature sets. Finally, …

Navier-Stokes Simulations Of Flows About Complex Configurations Using Domain Decomposition Techniques, Kamran Fouladi-Semnani

Mechanical & Aerospace Engineering Theses & Dissertations

An algorithm is developed to obtain numerical simulations of flows about complex configurations composed of multiple and nonsimilar components with arbitrary geometries. The algorithm uses a hybridization of the domain decomposition techniques for grid generation and to reduce the computer memory requirement. Three dimensional, Reynolds-averaged, unsteady, compressible, and complete Navier-Stokes equations are solved on each of the subdomains by a fully-vectorized, finite-volume, upwind-biased, approximately-factored, and multigrid method. The effect of Reynolds stresses is incorporated through an algebraic turbulence model with several modifications for interference flows. The present algorithm combines the advantages of an efficient, geometrically conservative, minimally and automatically dissipative …

Visual Speech Training Aid For The Deaf, Subhashri Venkat

Electrical & Computer Engineering Theses & Dissertations

A computer-based vowel articulation training aid has been developed. A "continuous" acoustic-phonetic transformation is performed to map speech parameters to a lower dimensionality display space. There are two possible approaches to this transformation problem. The transformation could be either linear or a combination nonlinear/linear. The nonlinear transformation is performed using a multi-layered feedforward neural network with linear output layers. Speech parameters are extracted either from an analog filter bank arrangement (band energies) or by a digital signal processing procedure (Discrete Cosine Transform Coefficients). The speech parameters obtained from both methods correspond to the spectral envelope of the speech signals. The …

Use Of A Generalized Set Of Variables In Fluid Flow Calculations, Pawel Chwalowski

Mechanical & Aerospace Engineering Theses & Dissertations

In fluid flow calculations, a set of generalized field variables is used to replace the more conventional choice of either the conserved variables, or the primitive variables. This generalized set of variables represents an infinite number of possible choices for the specific set of field variables. For algorithms of both the implicit and explicit type, the resulting effect of a change in field variables on a steady-state flow solution is in general relatively small. However, for implicit algorithms, a consistent linearization with respect to the new variables results in dramatic changes in the overall matrix conditioning of the linear systems …

Finite Element Formulation And Numerical Simulation Of The Large Deflection Random Vibration Of Laminated Composite Plates, Jay Howard Robinson

Mechanical & Aerospace Engineering Theses & Dissertations

A theoretical large deflection finite element formulation is developed for the purpose of simulating the random vibration of thin generally laminated composite plates. The random acoustic load is taken to be stationary and Gaussian with zero mean and uniform magnitude and phase over the surface of the plate. In­ plane inertia terms are included in the formulation however rotary inertia terms are assumed negligible.

The integration routine is derived from a set of unified single step algorithms, using a weighted satisfaction of the equilibrium equation. The algorithm is second order accurate and unconditionally stable for particular values of its free …

Grid Generation And Flow Computation About A Martian Entry Vehicle, John Edward Stewart

Mechanical & Aerospace Engineering Theses & Dissertations

A number of vehicles are currently being proposed for a manned mission to Mars. One of these vehicles has a modified blunt-nosed cone configuration. Experimental results have been obtained for this vehicle in 1968. These results show lift-over-drag ratios comparable to those needed for Mars entry. Computations are performed here to verify the earlier results and to further describe the flight characteristics of this vehicle.

An analytical method is used to define the surface of this vehicle. A single-block volume grid is generated around the vehicle using an algebraic Two-Boundary Grid Generation algorithm (TBGG) and transfinite interpolation. Euler solutions are …

Encoding Phonetic Knowledge For Use In Hidden Markov Models Of Speech Recognition, Danming Qian

Electrical & Computer Engineering Theses & Dissertations

Hidden Markov models (HMM's) have achieved considerable success for isolated-word speaker-independent automatic speech recognition. However, the performance of an HMM algorithm is limited by its inability to discriminate between similar sounding words. The problem arises because all differences between speech patterns are treated as equally important. Thus the algorithm is particularly susceptible to confusions caused by phonetically-irrelevant differences. This thesis presents two types of preprocessing schemes as candidates for improving HMM performance. The aim is to maximize the differences between phonologically-distinct speech sounds while minimizing the effect of variations in phonologically-equivalent speech sounds. The preprocessors presented are a discrete cosine …

The Frontal Method For Finite Element Analysis On Ibm-3090 Vector Computer, Chaerul Kamal

Civil & Environmental Engineering Theses & Dissertations

In this report, a Finite Element program based on the Frontal method was implemented on the IBM-3090 to exploit the vector capabilities offered by modern high performance vector computers. The overall computational speed for the Frontal Finite Element program was increased by 30% when the vector instructions were introduced. The Frontal solution for a system of simultaneous linear equations, however, has shown only minor improvement when vector instructions were used. More improvement in computational speed and memory storage can be expected by using the Parallel Frontal method with Substructures.

Nonproportionally Loaded Steel Beam-Columns And Flexibly-Connected Nonsway Frames, Siva Prasad Darbhamulla

Civil & Environmental Engineering Theses & Dissertations

A theoretical study of the inelastic stability of nonproportionally loaded steel beam-columns and flexibly-connected frames is conducted. Specifically, solution techniques are formulated to predict the nonlinear behavior of cross sections, spatial beam-columns, and nonsway plane frames under the combined influence of imperfections, flexible connections, and nonproportional loads. A set of new inelastic slope-deflection equations for imperfect members are derived and their use illustrated through in-depth studies of flexibly-connected portal and two-bay two-story frames. These equations are derived from a system of nonlinear ordinary differential equations. The member studies are carried out using a second-order finite-difference solution to a set of …

Analysis And Development Of A Switched Capacitor Power Supply, John Richard Hackworth

Electrical & Computer Engineering Theses & Dissertations

The combination of a switched capacitor network and switching power supply techniques can result in a transformer less regulated DC power supply that is small, relatively simple, and efficient. In addition, the output of such a system could be operated over a wide range of common mode voltages. Multiple switched capacitor supplies could be stacked to achieve voltage multiplication.

Although the output of a system of this type is a continuous function, the internal operation must be analyzed in finite time elements. This numerical analysis will be shown in both a mathematical approach and a computer model.

Hydrogenation Effects On Trap Related Conduction In Diamond, Linwood Cleveland Watkins Iii

Electrical & Computer Engineering Theses & Dissertations

In this research work, the results of an experimental investigation on the electrical conduction mechanism in type Ιa and Ilb diamonds are presented. These results are compared with those of previous theoretical studies. The basic physical properties of diamond are discussed. Details of ohmic contact formation on diamond are presented.

The current-voltage characteristics revealed the presence of traps located below the Fermi level. The unfilled trap density was determined. The deep traps were further studied using spectroscopic photoconductivity measurements and the trap energy levels were determined.

The effects of hydrogenation on trap related conduction were studied subsequently. Hydrogenation was carried …

A Case Study In The Development Of A Cost Reduction Methodology In The Public Sector, Ross Cooper Haines

Engineering Management & Systems Engineering Theses & Dissertations

Intense fiscal pressures have caused the Department of Defense (DoD) to explore new ways of reducing operating expenses. The primary technique used to achieve this objective is the use of competition - recently for maintenance requirements not previously subjected to competition. One such maintenance requirement is the periodic overhaul of one of the Navy's front line fighter aircraft - the F-14A Tomcat. This case study documents the cost reduction methodology developed by the DoD's incumbent overhaul facility in preparation for competition. The methodology discusses task time estimation, cost center structure, labor rate development and analysis, internal cost transfers as well …

The Influence Of Payload Dynamics On Trajectory Tracking Performance Of Robot Manipulator, Atul G. Kelkar

Mechanical & Aerospace Engineering Theses & Dissertations

Future space mission plans call for extensive use of remote manipulator systems for tasks such as assembly of lunar vehicles or space station modules, servicing of satellites, etc. These tasks demand very high precision end-effector motion control. Methods for compensating manipulator dynamics to achieve better trajectory tracking performance have been investigated by many researchers. Still, it is not always clear whether the added complexity of dynamic compensation is warranted for a given system. As an aid in evaluating when dynamic compensation is required, this thesis presents a method for the determination of maximum endpoint tracking error due to uncompensated inertial …

A Detailed Analysis Of Dynamic Robotic Simulation, Lonnie J. Love

Mechanical & Aerospace Engineering Theses & Dissertations

Future space missions may require the utilization of automation technology for assembly, maintenance, repair, and a variety of repetitive or hazardous operations. Many tasks which are likely candidates for robotic or telerobotic execution are either difficult or impossible to duplicate in the laboratory. With an accurate simulation package, many of these tasks can be evaluated by computer simulation before committing the resources required for laboratory experimentation. With this motivation, the ROBSIM robot simulation software has been developed by NASA Langley Research Center in conjunction with the Martin Marietta Corporation. ROBSIM is a versatile tool with features including the ability to …

Experimental Studies Of Bulk Optically Controlled Gaas Switches Utilizing Fast Infrared Quenching, Michael S. Mazzola

Electrical & Computer Engineering Theses & Dissertations

This dissertation describes some of the properties of copper-compensated, silicon-doped GaAs (Cu:Si:GaAs) with the purpose of demonstrating the feasibility of the Bulk Optically Controlled Switch (BOSS) concept. The BOSS concept involves the excitation of electrons or holes from selected deep centers in the band gap of a bulk Cu:Si:GaAs photoconductor. The conductivity of the Cu:Si:GaAs crystal can be increased or decreased on command by irradiating the crystal with laser light of different wavelengths in the infrared. Photoconductivities as large as 1 (Ω cm^)-1 were measured to persist for microseconds after illumination by a 7 ns laser pulse with wavelength …

An Experimental Study Of An Axisymmetric Turbulent Boundary Layer Disturbed By A Periodic Freestream, Chithrabhanu Koodalattupuram

Mechanical & Aerospace Engineering Theses & Dissertations

Behavior of an axisymmetric equilibrium turbulent boundary layer disturbed by a propeller wake in the freestream was investigated experimentally. Tests were conducted in a low speed wind tunnel and measurements of turbulence quantities were made using an X wire probe and a constant temperature anemometer. The boundary layer flow on a cylindrical body was characterized by measuring its gross parameters and comparing them with classical values. Propeller speed was measured using an electronic circuit whose output signal was also used to trigger hot wire probe. Gross boundary later characteristics of the disturbed boundary layer did not deviate appreciably from the …

Control And Mechanism Interaction For Ground-Based Testing Of Space Structures, Li-Farn Yang

Mechanical & Aerospace Engineering Theses & Dissertations

In the ground-based validation testing, the adverse effect of terrestrial conditions such as a gravitational force interferes with the dynamic behavior of space structures. A suspension system is developed to assess the structural characteristics in a simulated zero-gravity environment. Using a mechanisms approach, the synthesis of a noncircular disk with a torsional spring at its rotational axis is designed to counteract the gravitational force of test structures during the testing.

The multibody dynamics of a flexible steel beam carried on a rigid trolley has been investigated. The system is constructed in such a way that the rapid and large-angle slewing …

A Systematic Procedure For The Analysis And Design Of Deployable Space Structures, Praveen Kumar

Mechanical & Aerospace Engineering Theses & Dissertations

An integrated graph theory and a symmetry-based approach have been developed for the type synthesis of deployable truss structures. Using this systematic approach, a bay of a deployable structure may be looked upon as being built around an axis or a plane of symmetry, including anti-symmetry. By providing a fictitious joint along this axis, the problem of structural design and analysis can be reduced to the study of one plane or face of the given structure. Each face is considered to be an assemblage of structural links connected by joints which form a closed kinematic chain. The conventional graph representation …

Eigensensitivity Analysis For Space Structures With Applications In Design Optimization, Sean Patrick Kenny

Mechanical & Aerospace Engineering Theses & Dissertations

Eigensensitivity analysis is concerned with the rates of changes of eigenvalues and eigenvectors with respect to design variables. Eigensolutions of space structures are found to display four distinct characteristics, three of which are related to various types of repeated eigenvalues. This study will address three cases of the real symmetric structural eigenvalue problem. The three cases that will be considered are: distinct eigenvalues, repeated eigenvalues with distinct first eigenvalue derivatives, and repeated eigenvalues with infinitely repeating eigenvalue derivatives. Analytic formulations for eigenvalue/ vector derivatives will be presented for each of the three cases. The directional differentiability of eigenvalues for the …

Diagnostics Software For Concurrent Processing Computer Systems, Robert L. Jones Iii

Electrical & Computer Engineering Theses & Dissertations

Diagnostics software for analyzing ATAMM based concurrent processing systems is presented in this thesis. ATAMM (Algorithm to Architecture Mapping Model) is a new model developed by researchers at Old Dominion University and the NASA-Langley Research Center. ATAMM is capable of modeling the execution of large grain algorithms on distributed data flow architectures. Investigating a real or simulated ATAMM based system requires the aid of software tools. The software tool presented in this thesis can evaluate the behavior and performance of an ATAMM based system. The tool graphically portrays algorithm activities and processor activities. The tool's measurement capabilities indicate computing speed, …

Radiative Interactions In Laminar Duct Flows, Prakash A. Trivedi

Mechanical & Aerospace Engineering Theses & Dissertations

Analyses and numerical procedures are presented for infrared radiative energy transfer in gases when other modes of energy transfer occur simultaneously. Two types of geometries are considered, a Parallel Plate Duct and a Circular Duct. Fully developed laminar incompressible flows of absorbing-emitting species in black surfaced ducts are considered under the conditions of uniform wall heat flux. The participating species considered are OH, CO, CO₂, and H₂O. Nongray as well as gray formulations are developed for both geometries. Appropriate limiting solutions of the governing equations are obtained and conduction-radiation interaction parameters are evaluated. Tien and Lowder's …

A Model Of Dc Glow Discharges With Abnormal Cathode Fall, Karl H. Schoenbach, Hao Chen, G. Schaefer

Bioelectrics Publications

A model for an abnormal glow discharge, including a self‐consistent analysis of the cathode fall, was developed. It combines microscopic particle simulation by means of Monte Carlo methods with a fluid model of the gas discharge. The model allows calculations of the steady‐state electrical field distribution, the charged‐particle densities, and the current densities along the axis of the discharge. The model was used to simulate a glow discharge in 80% He and 20% SF₆ at a pressure of 8 Torr with a current density of 1 A/cm². The computed discharge voltage agrees well with measured values. The …

An Extension Of Essentially Non-Oscillatory Shock-Capturing Schemes To Multi-Dimensional Systems Of Conservation Laws, Jay Casper

Mathematics & Statistics Theses & Dissertations

In recent years, a class of numerical schemes for solving hyperbolic partial differential equations has been developed which generalizes the first-order method of Godunov to arbitrary order of accuracy. High-order accuracy is obtained, wherever the solution is smooth, by an essentially non-oscillatory (ENO) piecewise polynomial reconstruction procedure, which yields high-order pointwise information from the cell averages of the solution at a given point in time. When applied to piecewise smooth initial data, this reconstruction enables a flux computation that provides a time update of the solution which is of high-order accuracy, wherever the function is smooth, and avoids a Gibbs …

Influence Of Copper Doping On The Performance Of Optically Controlled Gaas Switches, St. T. Ko, V. K. Lakdawala, K. H. Schoenbach, M. S. Mazzola

Electrical & Computer Engineering Faculty Publications

The influence of the copper concentration in silicon-doped gallium arsenide on the photoionization and photoquenching of charge carriers was studied both experimentally and theoretically. The studies indicate that the compensation ratio (N_Cu/N_Si) is an important parameter for the GaAs:Si:Cu switch systems with regard to the turn-on and turn-off performance. The optimum copper concentration for the use of GaAs:Si:Cu as an optically controlled closing and opening switch is determined.

Electrical Properties Of Hydrogenated Diamond, Sacharia Albin, Linwood Watkins

Electrical & Computer Engineering Faculty Publications

Hydrogen passivation of deep traps in diamond is demonstrated. Current‐voltage (I‐V) characteristics of polycrystalline thin film and bulk diamond were studied before and after hydrogenation. On hydrogenation, all the samples showed several orders of magnitude increase in conductivity. Hydrogenation was carried out under controlled conditions to study the changes in the I‐V characteristics of the samples. The concentration of uncompensated traps was varied systematically by hydrogenation. The concentration of electrically active hydrogen was determined from the I‐V data. It is shown that hydrogenation is an alternative to deep‐level transient spectroscopy, suitable for …

Measurement Of Magnetic Fluctuations By O-X Mode Conversion, L. L. Vahala, G. Vahala, N. Bretz

Electrical & Computer Engineering Faculty Publications

The possibility of measuring magnetic fluctuations in a fusion plasma is considered by examining the O→X mode conversion. Under certain conditions and with good angular resolution, this mode conversion can be attributed to the presence of magnetic fluctuations even though the level of these fluctuations is much lower than that of density fluctuations. Some nonideal effects such as mode polarization mismatch at the plasma edge are also discussed.

Application Of The Results Of Carbon Pellet Modeling To The Problem Of Plasma Penetration, L. L. Vahala, A. G. El Cashlan, G. A. Gerdin, P. B. Parks

Electrical & Computer Engineering Faculty Publications

The assumptions of the evaporation model for low-Z pellets interacting with magnetic fusion plasmas developed by Parks are tested. These assumptions are that the vapor density profile in the region adjacent to the pellet surface falls off with radial distance as r^-α , where 5 <α<6, and that the ionization time for the transition between charge states ז_f (i.e., for r < ~3 sonic radii). The first assumption is tested by solving a two-parameter eigenvalue problem for the evaporation cloud in the region interior to the sonic radius; the results are found to be consistent with the low-Z evaporation model. The second assumption, that ז_zi «ז_f, is tested at the sonic radius using the results from atomic physics and the low-Z evaporation model. It is found that indeed ז_zi «ז_f for plasmas with parameters close to thermonuclear conditions (e.g. CIT), but not for those of smaller Tokamaks such as …