Engineering Commons^™

Investigation Of Effects Of Nose Bluntness And Angle Of Attack On Slender Bodies In Viscous Hypersonic Flows, Ashwini Kumar Sehgal

Mechanical & Aerospace Engineering Theses & Dissertations

Hypersonic flows over cones and straight biconic configurations are calculated for a wide range of free stream conditions in which the gas behind the shock is treated as perfect. Effect of angle of attack and nose bluntness on these slender bodies in air is investigated extensively. The numerical procedures are based on the solution of complete Navier-Stokes equations at the nose section and parabolized Navier Stokes equations further downstream. The flow field variables and surface quantities show significant differences when the angle of attack and nose bluntness are varied. The complete flow field is thoroughly analyzed with respect to velocity, …

Development And Characterization Of Monoclonal Antisperm Antibodies: Potential For Contraception, Dilrowshan H. Haque

Theses and Dissertations in Biomedical Sciences

There is an expressed need to develop a greater variety of safe contraceptive methods which would find acceptance worldwide, particularly in developing countries. Immunization against spermatozoa might be such a method as judged by the accumulated evidence from studies on human females and in a number of female animal species.

Two extraction techniques were used for sperm membrane antigen isolation. The first technique involved NP-40 detergent for antigen extraction from human motile sperm and the second technique employed homogenized human testis for antigen extraction. Using these immunogens, sperm membrane-specific monoclonal antibodies (MAbs) were developed. When these antisperm MAbs were subjected …

Large-Amplitude Finite Element Flutter Analysis Of Composite Panels In Hypersonic Flow, Carl E. Gray Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

A finite-element approach is presented for determining the nonlinear flutter characteristics of two-dimensional isotropic and three-dimensional composite laminated thin panels using the third-order-piston, transverse loading, aerodynamic theory. The unsteady, hypersonic, aerodynamic theory and the von Karman large deflection plate theory are used to formulate the aeroelastic problem. Nonlinear flutter analyses are performed to assess the influence of the higher-order aerodynamic theory on the structure's limit-cycle amplitude and the dynamic pressure of the flow velocity. A solution procedure is presented to solve the nonlinear panel flutter and large-amplitude free vibration finite element equations. This procedure is a linearized updated mode with …

Maximum Likelihood Estimation For Distributed Parameter Models Of Large Beam-Like Structures, Ji Yao Shen

Mechanical & Aerospace Engineering Theses & Dissertations

Proposed large space structures have many characteristics that give an advantage to modeling their structural dynamics by a set of partial differential equations (PDE's). By far, the most effort put forth in studying system identification and control to date has been based on finite element models. Despite its acceptability, such lumped parameter models have inevitable deficiencies primarily because of their complexity. Both approaches are complementary and each should be used where it is most effective. But the fact is that the distributed parameter approach has not been developed to the level of maturity as for the lumped parameter approach.

Motivated …

Two-Dimensional Heat Loss From A Building Slab Including Convective Effects In Saturated Soil, William W. Rust Iii

Mechanical & Aerospace Engineering Theses & Dissertations

The heat loss from a building slab was investigated. The continuity equation, Darcy's Law and the energy equation were formulated to include the temperature dependence of viscosity and density of water. The governing equations and appropriate boundary conditions were transformed into dimensionless variables. A finite difference numerical scheme was constructed based on the Gauss-Seidel method by lines and solved iteratively in alternating directions. A correlation between the geometrical characteristics of the domain, the convective surface heating parameters, and the total nondimensional slab heat loss in two dimensions was discovered. Furthermore, the correlation was extended to three-dimensional slabs and produced good …

Kinematic Synthesis Of Deployable-Foldable Truss Structures Using Graph Theory, Dirk B. Warnaar

Mechanical & Aerospace Engineering Theses & Dissertations

A graph theoretic approach is applied to the conceptual design of deployable truss structures. The characteristics that relate to the inter-connectivity of the elements of a deployable truss structure can be captured in a schematic representation, called a graph. A procedure is presented that enables the exhaustive generation of these graphs for structures of any given number of nodes and links and which are foldable onto a plane or onto a line.

A special type of truss structures, called truss modules, is presented. Graphs of this class of structures form a subset of the graphs of truss structures. Two procedures …

Prediction And Control Of Asymmetric Vortical Flows Around Slender Bodies Using Navier-Stokes Equations, Tin-Chee Wong

Mechanical & Aerospace Engineering Theses & Dissertations

Steady and unsteady vortex-dominated flows around slender bodies at high angles of attack are solved using the unsteady, compressible Navier-Stokes equations. An implicit upwind, finite-volume scheme is used for the numerical computations.

For supersonic flows past pointed bodies, the locally-conical flow assumption has been used. Asymmetric flows past five-degree semiapex cones using the thin-layer Navier-Stokes equations at different angles of attack, freestream Mach numbers, Reynolds numbers, grid fineness, computational domain size, sources of disturbances and cross-section shapes have been studied. The onset of flow asymmetry occurs when the relative incidence of pointed forebodies exceeds certain critical values. At these critical …

Magnetic-Field Distributions In Zinc-Nickel Ferrite, T. A. Dooling, Desmond C. Cook

Physics Faculty Publications

The Mössbauer effect has been used to study the microscopic magnetic properties of the cubic microwave ferrite (Zn_0.41Ni_0.59)Fe₂O₄ at 300 K. The magnetically split spectrum is broad and unresolved due to the overlap of the hyperfine magnetic fields at the tetrahedral and octahedral sites. This is caused by a distribution of magnetic fields at each site. The distribution is especially large and asymmetric at the octahedral site and is due to the fact that the iron atoms at this site are influenced by the presence of both iron and zinc at the tetrahedral …

Simulator For Concurrent Processing Data Flow Architectures, Mahyar R. Malekpour

Electrical & Computer Engineering Theses & Dissertations

A software simulator capable of simulating execution of an algorithm graph on a given system under the Algorithm To Architecture Mapping Model (ATAMM) rules is presented in this thesis. ATAMM is capable of modeling the execution of large-grained algorithms on distributed data flow architectures. Investigating the behavior and determining the performance of an ATAMM based system requires the aid of software tools. The ATAMM Simulator presented in this thesis is capable of determining the behavior, performance, and reliability of a system without having to build a hardware prototype. Case studies are performed on four algorithms to demonstrate the capabilities of …

Phase Changes In Plasma‐Sprayed Zinc‐Nickel Ferrite, T. A. Dooling, Desmond C. Cook

Physics Faculty Publications

The magnetic and crystalline properties of a plasma‐sprayed coating of the microwave absorbing zinc‐nickel ferrite, (Zn_0.41Ni_0.59 )Fe₂O₄ have been studied at 300 K using the Mössbauer effect and x‐ray diffraction (XRD). Both techniques indicate that the plasma‐sprayed material separated into two phases. The first is a nickel‐rich phase with magnetic fields of 47.5 and 44.5 T at the tetrahedral and octahedral sites, respectively. The second is a zinc‐rich phase, zinc meta‐ferrite, having a small magnetic field of 4.2 T. The quadrupole splitting of this second phase is ΔE=0.34 mm s⁻¹, …

Thermal Compatibility Analysis Of The Passive Damping Treatment Proposed For The Space Shuttle Remote Manipulator System (Srms), Mahesh Chowdhary

Mechanical & Aerospace Engineering Theses & Dissertations

The NASA Space Shuttle Remote Manipulator System (SRMS), due to its long reach and light weight construction has significant structural flexibility. Thus any routine use of SRMS often results in large amplitude oscillations with long settling time. A passive damping technique utilizing a constrained viscoelastic layer damping treatment has been proposed to augment the active control of these oscillations in order to enhance the system stability and the end effector positional accuracy. This thesis concerns with the thermal compatibility analysis of the proposed damping treatment. The necessity for thermal compatibility analysis arises from the fact that acceptable damping performance of …

Monte Carlo Simulation Of Millimeter-Wave Gunn Effect Oscillators, Ramani Vaidyanathan

Electrical & Computer Engineering Theses & Dissertations

Monte Carlo simulations have been carried out to investigate the performance of microwave Gunn oscillators. Three separate aspects of the simulation problem have been comprehensively addressed in this work. First, the presence of an external circuit has been self-consistently incorporated into the calculations. The inclusion of the external circuit facilitates a study of the circuit controlled regime, and correctly models effects arising from the time dependent boundary conditions. Secondly, microscopic details of the electronic relaxation mechanisms which ultimately control the frequency response limits, have been taken into account through an iterative Monte Carlo-Poisson scheme. This procedure overcomes a potential shortcoming …

Electric Field Induced Emission As A Diagnostic Tool For Measurement Of Local Electric Field Strengths, A. N. Dharamsi, K. H. Schoenbach

Bioelectrics Publications

The phenomenon of electric field induced (EFI) emission is examined in several diatomic and polyatomic molecules. The possibility of using this phenomenon as a diagnostic tool to measure, nonintrusively, the strength and direction of local electric fields in plasmas is discussed. An estimate of the EFI signal emitted in a typical application plasma is given. This yields a lower bound on the detector sensitivity necessary to exploit EFI emission in practical applications. It is concluded that, at present, the EFI signal could be measured by some very sensitive infrared detection schemes available. Current progress in infrared detector technology, if maintained, …

Continuum Modeling Methodology For Dynamic Behavior Of Towers, Khaled A. Obeid

Civil & Environmental Engineering Theses & Dissertations

A very common problem in Civil Engineering is the analysis and design of lattice structures. These types of structures generally consist of repetitive sections and have been utilized in the erection of transmission and communication towers, space roof trusses, solar energy collectors, and space platforms. Since lattice structures consist of a significantly large number of members and subsequently a large number of nodes, the classical discrete technique of analysis can be very expensive even on today's modern computers. This study applies a rational approach which capitalizes on the repetitive nature of towers to develop the equivalent continuum model for the …

Numerical Modeling Of Flame Lift-Off Phenomenon And Calculation Of Thermal Loads On A Methane Fuel Injector With Complex Geometry, Taj O. Mohieldin

Mechanical & Aerospace Engineering Theses & Dissertations

A numerical study has been conducted to analyze a fuel injector with three in-line cylinder geometry that has been adopted as a model for investigating the combustion phenomenon in the 8-Foot High Temperature Tunnel (HTT) combustor at the NASA Langley Research Center. The primary objective here is to analyze the flame lift-off phenomenon in the three cylinder fuel injector geometry in two-dimensions. The fluid mechanics model used in the analysis includes time-averaged Navier-Stokes equations that are employed in conjunction with a two-equation k-$\epsilon$ model for predicting the effects of turbulence. Calculations were performed with three chemistry models, namely fast chemistry, …

Information Technology And Wealth: Cybernetics, History And Economics, Elin Whitney-Smith

Engineering Management & Systems Engineering Theses & Dissertations

Capitalism developed where and when it did because there was high information access. There was high information access because of a major advance in information technology--the press. Where the technology was not controlled by the "powers that be" there was economic growth and a shift in the entire social structure. Where it was controlled there was no structural change and there was economic ruin. The development of capitalism is a major step change in economic growth. It is also a major change in the way people organize themselves into groups.

Major step changes in the growth and in the organization …

An Unsolicited Sociotechnical Intervention In A Public System: A Participatory Action Research Approach, Ely Alfred Dorsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

This research concerns itself with Participatory Action Research in a hostile setting. The thrust is a sociotechnical one, with the intent being to enhance the capacity of the Wallop Public School System, Wallop, USA, to address its problem of racial disparate treatment of Black children. The potential for Organizational Learning among the school system's senior staff is studied. Some new theory about such hostile interventions is proposed. Also discussed are questions about reliability and construct validity within the context of the multiple role playing that an interventionist has in this setting. The role of the press is reflected in the …

Second Coefficient Of Viscosity In Air, Robert L. Ash, Allan J. Zuckerwar, Zhonquan Zheng

Mechanical & Aerospace Engineering Faculty Publications

Acoustic attenuation measurements in air were analyzed in order to estimate the second coefficient of viscosity. Data over a temperature range of 11 C to 50 C and at relative humidities between 6 percent and 91 percent were used. This analysis showed that the second coefficient of viscosity varied between 1900 and 20,000 times larger than the dynamic or first coefficient of viscosity over the temperature and humidity range of the data. In addition, the data showed that the molecular relaxation effects, which are responsible for the magnitude of the second coefficient of viscosity, place severe limits on the use …

Micromechanics Of Granular Materials And Its Relation To Wave Velocity, Tarun K. Agarwal

Civil & Environmental Engineering Theses & Dissertations

The macro characters of the granular materials depend upon micromechanical parameters such as the void ratio, particle shape, contact force distribution, and initial state of the fabric of the assembly. Since it is difficult to evaluate these internal parameters from laboratory experiments, a macro measure is desired which depends directly on these internal parameters. One such measure has been shown to be dynamic shear modulus but it was incomplete in predicting directional changes in the internal parameters. Therefore, it is hypothesized here that the complete elastic moduli matrix will have more direct information about the internal parameters, especially the dynamic …

Effect Of Passive Flow-Control Devices On The Drug Of A Tractor-Trailer Model, Jagjit K. Ahuja

Mechanical & Aerospace Engineering Theses & Dissertations

The aerodynamic drag of tractor trailers is responsible for approximately half of the fuel consumption at highway speeds (55m.p.h.). Thus, it is important that vehicle drag be reduced in order to reduce operating costs and to conserve fuel. The purpose of the subject research conducted in the Old Dominion University Low-Speed Wind Tunnel was to determine the effect of various add-on flow-control devices, such as a cab-mounted flow deflector and gap seals between the tractor and the trailer. In addition, the effect of trailer rear-edge shaping has been studied. This was accomplished by contouring the trailer's rear end. It has …

Comparison Of Digital Controllers Used In Magnetic Suspension And Balance Systems, William A. Kilgore

Mechanical & Aerospace Engineering Faculty Publications

Dynamic systems that were once controlled by analog circuits are now controlled by digital computers. Presented is a comparison of the digital controllers presently used with magnetic suspension and balance systems. The overall responses of the systems are compared using a computer simulation of the magnetic suspension and balance system and the digital controllers. The comparisons include responses to both simulated force and position inputs. A preferred digital controller is determined from the simulated responses.

Measurement Of Thermal Noise In Condenser Microphones In A Vacuum-Isolation Vessel, Kim Chi Thi Ngo

Electrical & Computer Engineering Theses & Dissertations

The electrical noise generated by thermal agitation of the air molecules impinging upon the membrane of a condenser microphone and from its associated preamplifier has been studied analytically and experimentally over a wide bandwidth. These background noise levels constitute one of the most important specifications of a microphone for they determine the lowest sound pressure that can be detected. Therefore, a new method for measuring the thermal agitation noise within a bandwidth of 1-25600 Hz has been developed. The theoretical and experimental measurements of thermal agitation noise in a condenser microphone by enclosing the microphone in a vessel which is …

Optical And High Electric Field Effects In Bulk Gallium Arsenide Switches, Randy Roush

Electrical & Computer Engineering Theses & Dissertations

During the past few years, bulk, photoconductive switching has become recognized as a viable topic for future research on moderate and high power switches. The two-pulse, or BOSS, concept relies on an excitation laser pulse, and a separate de-excitation pulse in conjunction with silicon doped, copper compensated, GaAs to create a variable temporal electrical pulse width. The research contained in this document provides information concerning the feasibility of the BOSS concept, as the switch is scaled to larger sizes, and higher voltage and current. The major concern will be the high voltage and current effects. The absorption length for 1064 …

The Effectiveness Of Viscoelastic Damping Treatments On A Flexible Manipulator Subjected To Torsional Loads, Leah L. Remias

Mechanical & Aerospace Engineering Theses & Dissertations

The advent of new technology has led to an increasing number of missions in space. The space shuttle Remote Manipulator System (RMS) is a lightweight flexible manipulator currently used in NASA space missions. The future role of the RMS and similar flexible manipulators may include in-space construction and assembly tasks. Because these tasks require precise motion and short settling time of the end-point oscillations, effective vibration control schemes are being investigated.

Passive damping techniques have shown to provide a considerable amount of damping in controlling flexural vibrations. In this research passive damping via constrained viscoelastic damping treatments is explored as …

Development Of A Perturbation Generator For Vortex Stability Studies, John Edward Riester Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Theory predicts vortex instability when subjected to certain types of disturbances. It was desired to build a device which could introduce controlled velocity perturbations into a trailing line vortex in order to study the effects on stability. A perturbation generator has been designed and manufactured which can be attached to the center-body of an airfoil type vortex generator. Details of design tests and manufacturing of the perturbation generator are presented. The device produced controlled perturbations with frequencies in excess of 250 Hz. Preliminary testing and evaluation of the perturbation generator performance was conducted in a 4 inch cylindrical pipe. Observations …

The Modeling Of The Interactions Of Pellets With Magnetic Fusion Plasmas For Alpha Particle Diagnostics, Abdel-Ghafar Mahmood El-Cashlan

Electrical & Computer Engineering Theses & Dissertations

A model for the interactions of hydrogen and carbon pellets with thermonuclear fusion plasmas has been developed and solved to determine the charge-state spatial distributions in the ablation cloud surrounding the pellet. The ionization is treated in a self-consistent manner in the energy balance and the collisional radiative (CR) model is used to calculate the ionization levels. External plasma electron effects on ionization are included. The electron heat flux is modeled as a multigroup distribution. The channelling of the flow along the field line is treated phenomenologically by restricting the cross-sectional area of the flow. The predictions of the model …

Integrated Control Of Thermally Distorted Large Space Antennas, Robert H. Tolson

Mechanical & Aerospace Engineering Theses & Dissertations

Studies on controlling the thermal distortion of large space antennae have generally investigated a single orbital position and have optimized actuator locations based on minimizing the RMS surface deviation from the original parabolic shape. One study showed the benefits of directly using far zone electric field characteristics as the performance measure; but, this approach resulted in a nonlinear programming problem. The objective of the current study is to develop an approach to designing a control system that (1) recognizes the time dependence of the distortion and (2) controls variables that are directly related to far field performance in a quadratic …

Deep Level Characterization Studies In Gaas, Gordhan R. Barevadia

Electrical & Computer Engineering Theses & Dissertations

The goal of this research was to investigate deep levels in different types of GaAs, a material for high power optically controlled bulk semiconductor switches. For low resistivity semiconductors, such as silicon doped GaAs material (p =0.054 Ω cm), deep level transient spectroscopy (DLTS) was used to characterize deep levels. Three deep levels (EL6, EL3, and EL2) have been detected in this material. For high resistivity semiconductors (p > 10⁴ Ω cm), difficulty of electrical carrier injection and of making a junction does not permit the use of DLTS technique. Therefore, an experimental set-up of the photo-induced current transient spectroscopy …

A Software Design Tool For Predictable Performance In Real-Time, Data Flow Architectures, Brij Mohan V. Mandala

Electrical & Computer Engineering Theses & Dissertations

A software design tool which aids in the performance evaluation and selection of operating points for an algorithm implemented in ATAMM defined data flow architectures is presented in this thesis. ATAMM (Algorithm To Architecture Mapping Model) is a new graph theoretic model developed by researchers at Old Dominion University and the NASA-Langley Research Center. ATAMM is capable of modeling the execution of large-grained algorithms on distributed data flow architectures. A software tool is required for predicting the performance, determining the resource requirements and for selecting suitable operating points for an ATAMM based system. The ATAMM Design Tool presented in this …

Dynamics And Control Of Two Suspension Mechanisms For Ground-Based Testing Of Space Structures, Joseph E. Wilson

Mechanical & Aerospace Engineering Theses & Dissertations

Two suspension systems which effectively simulate a gravity-free environment are presented. A single degree-of-freedom suspension system utilizing a specially profiled band mechanism in conjunction with a torsional spring is presented to show its feasibility and applicability for use as a ground-based testing device for flexible space structures. The second device, a two degree-of-freedom suspension system consisting of two springs and a folding linkage is presented to show the feasibility as a testing device for suspending space structures on earth.

Problems resulting in unwanted dynamic behavior due to deviations from the design parameters for both systems are addressed. A nonlinear controller …