Engineering Commons^™

The Ups Prototype: An Experimental End-User Service Across E-Print Archives, Herbert Van De Sompel, Thomas Krichel, Michael L. Nelson, Patrick Hochstenbach, Victor Lyapunov, Kurt Maly, Mohammad Zubair, Mohamed Kholief, Xiaoming Liu, Heath O'Connell

Computer Science Faculty Publications

A meeting was held in Santa Fe, New Mexico, October 21-22, 1999, to generate discussion and consensus about interoperability of publicly available scholarly information archives. The invitees represented several well known e-print and report archive initiatives, as well as organizations with interests in digital libraries and the transformation of scholarly communication. The central goal of the meeting was to agree on recommendations that would make the creation of end-user services -- such as scientific search engines and linking systems -- for data originating from distributed and dissimilar archives easier. The Universal Preprint Service (UPS) Prototype was developed in preparation for …

Developing A Parametric Cost Model For Operating Costs Of Army Ground Combat Weapon Systems, James O. Winbush Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a parametric cost model for predicting operating costs of Army ground combat weapon systems. The model is intended to be used during the first two phases of the Army's acquisition process. The research necessary to develop the model was guided by two questions: what weapon system characteristics (such as weight, horsepower, fuel consumption, primary mission, NBC protection, fire control and night fighting capability) impact directly on operating ground combat systems; and what is the form of the parametric model for operating costs for ground combat systems? The study extends the bounds of …

Piezoceramic Actuator Placement For Acoustic Control Of Panels, Jeffrey S. Bevan

Mechanical & Aerospace Engineering Theses & Dissertations

Optimum placement of multiple traditional piezoceramic actuators is determined for active structural acoustic control of flat panels. The structural acoustic response is determined using acoustic radiation filters and structural surface vibration characteristics. Linear Quadratic Regulator (LQR) control is utilized to determine the optimum state feedback gain for active structural acoustic control. The optimum actuator location is determined by minimizing the structural acoustic radiated noise using a modified genetic algorithm. Experimental tests are conducted and compared to analytical results.

Anisotropic piezoceramic actuators exhibit enhanced performance when compared to traditional isotropic piezoceramic actuators. As a result of the inherent isotropy, these advanced …

Multicast Services For Multimedia Collaborative Applications, Emad Eldin Mohamed Mohamed

Computer Science Theses & Dissertations

This work aims at providing multicast services for multimedia collaborative applications over large inter-networks such as the Internet. Multimedia collaborative applications are typically of small group size, slow group membership dynamics, and awareness of participants' identities and locations. Moreover, they usually consist of several components such as audio, video, shared whiteboard, and single user application sharing engines that collectively help make the collaboration session successful. Each of these components has its demands from the communication layer that may differ from one component to another. This dissertation identifies the overall characteristics of multimedia collaborative applications and their individual components. It also …

Suppression Of Post-Buckling Deflection And Panel-Flutter Using Shape Memory Alloy, Mohammad Tawfik Abo El So-Oud

Mechanical & Aerospace Engineering Theses & Dissertations

A novel concept proposed is the use of Shape Memory Alloy (SMA) to reduce the panel thermal deflection and flutter responses. SMA has unique ability to recover large prestrains completely when the alloy is heated (by aerodynamic heating in the present case) above the austenite start temperature A_s. During the recovery process, a large tensile recovery stress occurs if the SMA is restrained.

In this thesis, a panel subject to the combined aerodynamic and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA …

An Improved Thermal Mass Flow Controller For Hazardous And Precision Applications, William J. Alvesteffer

Mechanical & Aerospace Engineering Theses & Dissertations

A new mass flow controller has been designed which responds very rapidly to changes in control settings. The design was evolved after carefully studying the internal flow and the sources for thermal lag and other non-linear behavior. After discussing an overview of the basic mass flow controller operating principles, data will be presented which characterize the basic building blocks of an advanced flow sensor design. Subsequently, a flow model and control strategy have been developed and tested which reduce response lag significantly. Results of the new design, obtained experimentally under various transient conditions, will be discussed.

Long-Term Aircraft Structural Integrity Prediction Under The Influence Of Feedback Control, Si-Bok Yu

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis investigates the influence of feedback control, and other factors associated with loading characteristics, on fatigue damage reduction and long-term integrity of aircraft structural components. An actively controlled flexible aircraft model and a new state space modeling procedure for crack growth are utilized to uncover important factors which influence airframe crack growth. A matrix of simulation test cases is constructed to cover such variables as open-loop operation, nominal closed-loop operation, perturbed closed-loop operation (i.e., feedback gain variation), nominal maneuver profile, perturbed maneuver profile (including overload strength and frequency), atmospheric gust, and mean stress level. Simulation output data including crack …

Evaluation Of The Transport Properties Of Gasb For Bipolar Applications Through Monte Carlo Simulations, Damayanthi Palaniappan

Electrical & Computer Engineering Theses & Dissertations

GaAs is currently the semiconductor material of choice for high speed, low power applications. Its electronic transport properties are superior to almost all other semiconductors. It is also used in a variety of bipolar applications such as photodetectors and photo-mixers. However, as is well known, the hole mobility and related transport parameters of GaAs are not very good. This is a serious drawback, and poses a potential problem for all applications involving bipolar conductivity. In order to increase the high :frequency limits and high-speed capability of bipolar devices, the choice of an alternative material, therefore, becomes necessary. An important first …

A Pressure Transducer Using Field Emitter Arrays, Mark David Richmond

Electrical & Computer Engineering Theses & Dissertations

A new pressure sensing device using field emission from diamond coated silicon tips has been developed. A high electric field applied between a nano-tip array and a diaphragm configured as electrodes produces electron emission governed by the Fowler - Nordheim equation. The electron emission is very sensitive to the separation between the diaphragm and the tips, which is fixed at an initial spacing and bonded such that a cavity is created between them. Pressure applied to the diaphragm decreases the spacing between the electrodes, thereby increasing the number of electrons emitted.

Silicon has been used as a substrate on which …

A Generic Object-Oriented Random Variate Model For Discrete Event Simulations Separating The Data Model From The Process Model, Palathingal Frank

Computational Modeling & Simulation Engineering Theses & Dissertations

Data is the lifeline of any simulation model. The validity of the data is a primary determining factor on the accuracy of a simulation. Hence the data model is an important part of any simulation model. But this is, in most occasions, the most neglected part of any model. Most people view the model correctness in te1ms of the process model functionality rather than the data that is being used in the simulation. As simulation gets more accepted as a reliable problem-solving tool, it is increasingly important to pay careful attention to the accuracy of the simulation and that can …

Exploring Participation Processes For Technology Development: Case Studies Of Biotechnology Research And Development Projects In Thailand, Omjai Yuktavetya

Engineering Management & Systems Engineering Theses & Dissertations

There is increased awareness in the organizational and management literature that participation can make contributions in technology development. One of the problems in developing biotechnology in Thailand is that only a small portion of publicly funded research and development projects directly result in commercial success. Among the reasons cited (TDRI 1992a) is a lack of collaboration between various stakeholders; therefore, an effective technology policy to support their participation is needed. This research explores current participation processes in biotechnology research and development projects in Thailand in which there were different perspectives among various stakeholders. The quantitative and qualitative methodologies developed here …

Field Enhancement In Silicon Nanotip Field Emitter Arrays, Ajith Varghese

Electrical & Computer Engineering Theses & Dissertations

No abstract.

Dynamic And Interactive 3d Simulation Over The World Wide Web, Rajesh Vennam

Electrical & Computer Engineering Theses & Dissertations

The thesis presents the development of a new and novel three-dimensional simulation tool over the WWW using Virtual Reality Modeling Language (VRML). VRML is a 3D analog to HTML and serves as a simple, multiplatform language for publishing 3D Web pages. In general, most people use VRML for developing three-dimensional models or worlds that provide little or no interaction for the users. This tool combines interaction and dynamic object creation. A thorough study of VRML is done to explore the features of VRML that could be combined to develop methodologies for creation of dynamic and interactive 3D objects over the …

Ls-Dyna3d Modeling And Simulation For Uncontained Engine Debris Impact On Fuselage Skins, Robin Eileen Lawson

Mechanical & Aerospace Engineering Theses & Dissertations

Impact and penetration events for uncontained engine debris on fuselage skins are simulated using the LS-DYNA3D finite element analysis code. The LS-DYNA3D code is a nonlinear transient dynamic simulation tool with contact algorithms for impact. A finite element analysis is used to simulate the penetration of aluminum plates impacted by titanium impactors on aircraft-like skin panels. By gaining a more comprehensive understanding of this dynamic impact event, this work is meant to contribute to improving designs for damage tolerance and residual strength by providing modeling and analysis guidelines for the analyst.

Parametric studies are performed to determine the influence of …

Effect Of Temperature On Short-Term Creep Rupture Response In Polymer Matrix Pultruded Composites, Robert Harold Munson

Mechanical & Aerospace Engineering Theses & Dissertations

Polymer matrix pultruded composites have increasingly been used in applications where high strength-to-weight ratio and corrosion resistance are needed. Bridge and pier components are a couple of recent applications due the composite's resistance to corrosion from salt water. In applications of this sort, the material will commonly be subjected to sizable static loads while exposed to varying weather conditions. In using pultruded composites for these applications safely, a better understanding of the material's response to ambient conditions is necessary.

In this thesis, rectangular specimens of a polyester matrix glass reinforced pultruded composite sheet are subjected to both static tensile loading …

Jet Stability And Noise Computations Using Direct Numerical Simulation, Farouk Owis

Mechanical & Aerospace Engineering Theses & Dissertations

The computations of axisymmetric jet noise with symmetric disturbances are investigated using the direct numerical simulation of the unsteady compressible Navier-Stokes equations. High order accurate numerical schemes are employed for the solution of the governing equations. The investigation shows that MacCormack schemes with operator splitting and minimum dispersion error can be used to predict noise radiated from subsonic and supersonic jets with low and high Reynolds numbers. In addition, different kinds of nonreflecting boundary conditions are used at the inflow and outflow boundaries. These boundary conditions include characteristic boundary conditions, buffer domain technique and perfectly matching layer method. The results …

Development And Application Of Adaptive Dynamic Grids For Wake Vortex/Ground Interaction, Ilker Emin Türkgeldi

Mechanical & Aerospace Engineering Theses & Dissertations

An adaptive and dynamic grid approach is developed for the numerical computations of wake vortex flow problems with ground interaction. The unnecessary grid points at the far field of the original, large, single zone grid are removed for computational efficiency. Next, the grid is modified into an adaptive one, where the fine core region keeps track of the vortices and can be split into two regions when the vortex separation distance exceeds a specified limit length. In the final step a multi zonal feature is added to this grid by means of two embedded grids placed at the vortex centers …

Newton Parameter Update Algorithm For Recurrent Neural Networks Applied To Adaptive System Identification And Control, Donald Allen Gates

Electrical & Computer Engineering Theses & Dissertations

This paper shows that the combination of a second-order neural network parameter update algorithm and internal network feedback can be effectively used for adaptive, nonlinear, dynamical system identification and control. Adaptive neural identification and control algorithms are typically utilized for real-time applications where the rate of adaptation is often critical. A fast, adaptive network parameter update algorithm is presented.

Simulation results show that this algorithm is capable of quickly identifying and adapting to changes in system parameters, making it feasible to use for real-time control and fault accommodation applications.

Large Amplitude Pitching Of Supermaneuver Delta Wings Including Flow Control, Yahia A. Abdelhamid

Mechanical & Aerospace Engineering Theses & Dissertations

The unsteady, three-dimensional Navier-Stokes equations are solved to simulate and study the aerodynamic response of a delta wing undergoing large amplitude pitching motion up to 90° angle of attack. The primary model under consideration consists of a 76° swept, sharp-edged delta wing of zero thickness, initially at zero angle of attack. The freestream Mach number and Reynolds number are 0.3 and 0.45 × 106, respectively. The governing equations are solved time-accurately using the implicit, upwind, Roe flux-difference splitting, finite-volume scheme. Both laminar and turbulent flow solutions are investigated. In the laminar flow solutions, validation of the computational results is carried …

Two Approaches To Critical Path Scheduling For A Heterogeneous Environment, Guangxia Liu

Computer Science Theses & Dissertations

Advances in computing and networking technologies are making large scale distributed heterogeneous computing a reality. Multi-Disciplinary Optimization (MDO) is a class of applications that is being addressed under this paradigm. It consists of multiple heterogeneous modules interacting with each other to solve an overall design problem. An efficient implementation of such an application requires scheduling heterogeneous modules (with different computing and disk 1/0 requirements) on a heterogeneous set of resources (with different CPU, memory, disk IO specifications).

Given a set of tasks and a set of resources, an optimal schedule of the tasks on the resources is very hard to …

The Effects Of Offshore Mining Of Beach Quality Sediments On Nearshore Wave Climate, Frank R. Lonza

Civil & Environmental Engineering Theses & Dissertations

Coastal communities rely on the beaches to attract tourism, but these sources of revenue require maintenance, such as beach nourishment. In an effort to maintain these beaches without causing any detrimental results, research is conducted to determine what effects, if any, exist when mining for sand in offshore areas.

The U.S. Government is permitting the search for beach quality sands offshore but is also ensuring that such mining will not have adverse results to the nearshore wave climate. This study was conducted using a coarse grid bathymetric map to calibrate a numerical model developed by the Danish Hydraulic Institute (DHI). …

Stratal Architecture In A Prograding Shoreface Deposit, Eastern Shore, Va: Relationship To Grain Size, Permeability, And Facies Distribution, Andrew C. Miller

OES Theses and Dissertations

A fundamental concern of the stratigrapher is to develop predictive models of stratigraphic organization. In sedimentology one of the most significant problems that has yet to be resolved is the fact that there is a lack of quantitative information regarding the relationship between geometry of beds, thickness of beds, grain size and sedimentary structures in sandy environments, especially shallow marine deposits. Scientists have also realized the need to correlate quantitative permeability to sedimentary structures and scales of stratigraphic organization. The purpose of the study is to investigate the scales of stratigraphic organization that control the variation of grain size and …

Stability Analysis And Augmentation Of A Closed-Loop Computer Control System Subject To Electromagnetic Disturbances, Mustafa Doğan

Electrical & Computer Engineering Theses & Dissertations

Most electronic and electrical equipment is not only a potential source of electromagnetic interference (EMI) but can also malfunction when exposed to certain levels of ambient EMI. This phenomena becomes more significant for digital control-computers automating the command and control performances in complex plants. Such EM disturbances can introduce transient signals on analog sensor and actuator lines, change data values on digital buses and in memory, or even produce logic changes in the CPU. The result of these so called computer upsets is the introduction of some degree of degradation in the quality of the control signal ranging from a …

Stability Of Three-Dimensional Compressible Boundary-Layers, Samarasingham Jeyasingham

Mechanical & Aerospace Engineering Theses & Dissertations

The failure repair process of a continuously operating device is studied in this research. Different cases that incorporate modeling of equipment deterioration, inspection, and maintenance for optimal maintenance policy are proposed. Markov processes are used to determine state probabilities, and the optimal value of the mean time to preventive maintenance is determined by maximizing the availability of the equipment with respect to the meantime preventive maintenance. The approach uses models that assume that equipment can fail due to both deterioration and random failures. Preventive maintenance can be performed from each working state to avoid deterioration failure. Economic effects are integrated …

Development Of Baseline Water Quality Stormwater Detention Pond Model For Chesapeake Bay Catchments, William J. Musico

Civil & Environmental Engineering Theses & Dissertations

A stormwater detention pond model, EEMD (Environmentally Economic Management Design), was developed using VisualBasic to facilitate the design of extended detention basins. A detention basin is a design such that a site's stormwater runoff would meet certain environmental impact requirements. To ensure these environmental requirements are meet the Commonwealth of Virginia subscribes to the procedures outlined by the Chesapeake Bay Local Assistance Department (CBLAD).

The purpose of the Chesapeake Bay Local Assistance Department (CBLAD) Calculation Procedures is to ensure that the development of constructed areas do not further exacerbate current problems of stormwater-induced eutrophication and downstream flooding. The methodology is …

Aeroelastic Load Alleviation Using Shunted Piezolectrics, Anna-Maria Rivas Mcgowan

Mechanical & Aerospace Engineering Theses & Dissertations

Several analytical and experimental studies clearly demonstrate that piezoelectric materials (piezoelectrics) can be used as actuators to actively control vibratory response including aeroelastic response. However, two important issues in using piezoelectrics as actuators for active control are: 1) the potentially large amount of power required to operate the actuators, and 2) the complexities involved with active control (added hardware, control law design and implementation). Active or passive damping augmentation using shunted piezoelectrics may provide a viable alternative. This approach requires only simple electrical circuitry and very little or no electrical power. Shunted piezoelectrics have been shown to provide an efficient …

Development And Testing Of An Ac Micro Hollow Cathode Simulator, Thomas E. Caldwell

Electrical & Computer Engineering Theses & Dissertations

The use of AC source plasma discharge devices in applications such as material processing and film deposition has increased in recent years due to improvements in discharge efficiency made possible by devices such as the micro hollow cathode. Designing hollow cathodes for specific applications requires an understanding of the processes that govern the discharge. Simulation is an inexpensive tool for understanding hollow cathode operation and optimizing the device for specific applications. This thesis describes the development of an AC micro hollow cathode simulator. It details the theoretical models used in the simulation and presents the results of test cases intended …

Assessment Of A Higher Harmonic Control System For Minimizing Vibrations On A Dynamically Scaled Tiltrotor Model, David J. Piatak

Mechanical & Aerospace Engineering Theses & Dissertations

The performance of a higher harmonic control system called the Multipoint Adaptive Vibration Suppression System (MA VSS) at reducing 3/rev wing vibratory loads and fuselage vibrations on a dynamically-scaled tiltrotor model is presented. Previous wind tunnel tests on a semispan aeroelastic tiltrotor model have demonstrated the effectiveness of MAVSS for reducing wing vibratory loads using both an active flaperon and swashplate. The primary goal, however, of such a vibration suppression system is to reduce tiltrotor fuselage vibrations in order to improve passenger comfort. The present study addresses the reduction of both wing and fuselage vibrations using MA VSS active flaperons …

Preparation And Surface Studies Of Negative Electron Affinity Semiconductors Photocathodes, Khaled A. Elamrawi

Electrical & Computer Engineering Theses & Dissertations

Fabrication of high quantum efficiency, long lifetime negative electron affinity photocathodes is important for applications such as photomultipliers, image intensifiers, electron beam lithography, electron microscopy, and polarized electron sources. The surface cleanliness of the III-V semiconductor photocathode is crucial in obtaining high photosensitivity.

GaAs(100) and InP(100) photocathodes are prepared by atomic hydrogen cleaning. The cleaning effect on the photocathode performance is discussed. The surface degradation mechanisms which reduce the photocathode lifetime are presented. The photocathode surface cleanliness, structure, and morphology are studied using reflection high-energy electron diffraction (RHEED).

Quantum efficiencies of ∼14% and 8% are obtained for GaAs and InP, …

An Experimental Investigation Into The Effect Of Clearance And Torque On Load Sharing In A Bolted Joint, Jerry B. Robertson

Mechanical & Aerospace Engineering Theses & Dissertations

The shear load experienced by each bolt in a multi-fastener bolted butt joint is a percentage of the total load applied to the joint. Joint failure can be premature when one fastener is subjected to a disproportional amount of the total load. Conversely, the ultimate load the joint can endure may be increased if the distribution of loads can be equalized by some means. In this investigation, two and four fastener butt joints were studied. An instrumented bolt was constructed that could measure the bending stresses in the bolt associated with the bearing load. That data was converted into force …