Engineering Commons^™

Direct Current High-Pressure Glow Discharges, Robert H. Stark, Karl H. Schoenbach

Bioelectrics Publications

Stabilization and control of a high-pressure glow discharge by means of a microhollow cathode discharge has been demonstrated. The microhollow cathode discharge, which is sustained between two closely spaced electrodes with openings of approximately 100 μm diam, serves as plasma cathode for the high-pressure glow. Small variations in the microhollow cathode discharge voltage generate large variations in the microhollow cathode discharge current and consequently in the glow discharge current. In this mode of operation the electrical characteristic of this system of coupled discharges resembles that of a vacuum triode. Using the microhollow cathode discharge as plasma cathode it was possible …

Direct Current Glow Discharges In Atmospheric Air, Robert H. Stark, Karl H. Schoenbach

Bioelectrics Publications

Direct current glow discharges have been operated in atmospheric air by using 100 μm microhollow cathode discharges as plasma cathodes. The glow discharges were operated at currents of up to 22 mA, corresponding to current densities of 3.8 A/cm² and at average electric fields of 1.2 kV/cm. Electron densities in the glow are in the range from 10¹² to 10¹³  cm⁻³. Varying the current of the microhollow cathode discharge allows us to control the current in the atmospheric pressure glow discharge. Large volume atmospheric pressure air plasmas can be generated by operating microhollow cathode discharges …

Surface Resistance Measurements Of Superconducting Niobium Samples With A Triaxial Cavity, Paul Martin Boccard

Physics Theses & Dissertations

This experimental study has revealed and investigated many of the physical issues that affect accurate measurement of the surface resistance for small samples consisting of superconducting niobium films on copper substrates. It is believed that this work provides the groundwork for future research directed towards solving this important problem. Accurate measurement of surface resistance for such samples is needed to allow the rapid evaluation and optimization of the deposition parameters necessary for manufacturing low-loss superconducting niobium films.

A superconducting niobium triaxial cavity was investigated to determine its suitability for measuring the residual surface resistance of copper samples that were sputter-coated …

Continuous Adjoint Sensitivity Analysis For Aerodynamic And Acoustic Optimization, Kaveh Ghayour

Mechanical & Aerospace Engineering Theses & Dissertations

A gradient-based shape optimization methodology based on continuous adjoint sensitivities has been developed for two-dimensional steady Euler equations on unstructured meshes and the unsteady transonic small disturbance equation. The continuous adjoint sensitivities of the Helmholtz equation for acoustic applications have also been derived and discussed.

The highlights of the developments for the steady two-dimensional Euler equations are the generalization of the airfoil surface boundary condition of the adjoint system to allow a proper closure of the Lagrangian functional associated with a general cost functional and the results for an inverse problem with density as the prescribed target. Furthermore, it has …

Setpoint Tracking Predictive Control In Chemical Processes Based On System Identification, Sinchai Chinvorarat

Mechanical & Aerospace Engineering Theses & Dissertations

A Kraft recovery boiler in a pulp-paper mill provides a means for recovery of the heat energy in spent liquor and recovery of inorganic chemicals while controlling emissions. These processes are carried out in a combined chemical recovery unit and steam boiler that is fired with concentrated black liquor and which produces molten smelt. Since the recovery boiler is considered to be an essential part of the pulp-paper mill in terms of energy resources, the performance of the recovery boiler has to be controlled to achieve the highest efficiency under unexpected disturbances.

This dissertation presents a new approach for combining …

Elasto-Plastic Responses Of Buried Pipeline Systems Under Wave Propagation, Yuean-Chen Lau

Civil & Environmental Engineering Theses & Dissertations

The purpose of this research is to study the elastic and inelastic behavior of buried pipeline system under arbitrary seismic wave propagation. Both continuous and segmented pipes with joints and junctions are included. The surrounding soil is simulated by a series of elasto-plastic springs uniformly distributed longitudinally and laterally along the pipes. To the joints, elasto-plastic longitudinal springs and bilinear rotational springs are adopted. It is assumed that the pipes remain linearly elastic. The effects of soil liquefaction and fault movement are not considered.

Since the dynamic effect has been found to be negligible, a quasi-static analysis is adopted in …

Computation Of Flame Base Height Of A Turbulent Diffusion Flame Resulting From A Methane Jet, A. S. Kheireddine, S. K. Chaturvedi, T. O. Mohieldin

Mechanical & Aerospace Engineering Faculty Publications

This work summarizes numerical results for a diffusion flame formed from a cylindrical tube fuel injector, issuing a gaseous methane jet vertically in a quiescent atmosphere. The primary objective is to predict the flame base height and other flame characteristics as a function of the fuel jet velocity. A finite volume scheme is used to discretize the time-averaged Navier-Stokes equations for the reacting flow resulting from the turbulent fuel jet motion. The turbulent stresses, and heat and mass fluxes are computed from a Reynolds stress turbulence model. A chemical kinetics model involving two-step chemistry is employed for the oxidation of …

Aneuploidy Frequencies In Semen Fractions From Ten Oligoasthenoteratozoospermic Patients Donating Sperm For Intracytoplasmic Sperm Injection, Jerome Pfeffer, Myung-Geol Pang, Stanton F. Hoegerman, Christopher J. Osgood, M. W. Stacey, Jacob Mayer, Sergio Oehninger, William G. Kearns

Biological Sciences Faculty Publications

Objective: To determine aneuploidy frequencies in pellet and swim-up semen fractions from 10 infertile men with severe oligoasthenoteratozoospermia (OAT) who were donating sperm for intracytoplasmic sperm injection and to determine whether the swim-up isolation method would successfully separate aneuploid from haploid sperm.

Design: Prospective study.

Setting: Infertility clinic and molecular genetics laboratory.

Patient(s): Ten patients with severe OAT.

Intervention(s): Cytogenetic analyses by fluorescence in situ hybridization to determine aneuploidy frequencies for chromosomes 1, 13, 18, 21, X, and Y in sperm from swim-up and pellet fractions.

Main Outcome Measure(s): Gametic aneuploidy was scored in sperm fractions separated by the swim-up …

A Qfd Decision Model For Selecting Service, Teaching, And Research Opportunities, Paul Kauffmann, Abel Fernandez, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

New faculty are confronted with a barrage of information reiterating the importance of performance in the "big three" areas: teaching, service, and research / publications. From the provost to the department head, an untenured faculty member faces strong and sometimes conflicting pressures to become involved in activities ranging from committee assignments to participation in department or university research programs. Often these opportunities come with little guidance, advice, or obvious linkage to long term success in the three pillar areas and ultimately tenure. New faculty are confronted with a complex decision problem for which there is unstructured information available to develop …

Design And Construction Of A Mobile Laboratory For Distance Learning In Engineering Technology, Alok K. Verma

Engineering Technology Faculty Publications

The design and construction of a mobile laboratory to be used in conjunction with the televised program in Mechanical Engineering Technology Program at Old Dominion University is discussed. The aim of this program is to offer educational opportunities to individuals currently employed with an associate degree. The merit of the concept lies in the fact that it offers a cost effective way to provide a laboratory for multiple sites. Currently, the concept is being tested for two instructional areas, such as fluid mechanics and automatic controls.

Réalisation De Couches Minces De Cualse² Par Recuit De Feuilllets Superposés Cu/Al/Se/Al…, Étude De Conditions De Dépôt, C.O. El Moctar, S. Marsillac, J. C. Bernede, A. Conan, K. Benchouk, A. Khelil

Electrical & Computer Engineering Faculty Publications

Thin layers of Cu/Al/Se/Al/Cu/Al/Se/…/Al/Se sequentially deposited have been annealed half an hour at 855 K. CuAlSe₂ thin films crystallized in the chalcopyrite structure are obtained. The films being contaminated by oxygen, the experimental deposition conditions of the aluminum layer have been improved in order to decrease the atomic concentration of oxygen below 5 at%. Such results can be obtained in vacuum of 10^-4 Pa, when the aluminum deposition rate is 1 nm/s and when the layer is immediately covered after deposition. Films obtained in such a way are nearly stoichiometric with lattice parameters in accordance with the expected …

Mössbauer Effect Determination Of Relative Recoilless Fractions For Iron Oxides, Sei J. Oh, Desmond C. Cook

Physics Faculty Publications

The relative recoilless fraction (F-value) of each of six iron oxides, defined as the ratio of the recoil-free fractions of two different materials, was experimentally determined relative to hematite at 300 K and 77 K by Mössbauer spectroscopy. Using the relative recoil-free fractions compared to that of hematite, the relative recoilless fractions between all pairs of the seven iron oxides were determined. The F-values can allow conversion of Mössbauer subspectral areas to the relative atomic, molecular, or weight fractions of each iron oxide present in a mixed oxide phase sample.

Studies Related To The Design Of A Magnetic Suspension And Balance System For An Ultra-High Reynolds Number Flow Facility, Oscar Magno Michael Gomeiz

Mechanical & Aerospace Engineering Theses & Dissertations

The basic design principles for a magnetic suspension and balance system applied to the test section of an ultra-high Reynolds number facility are defined. The design of the cross-sectional area to be used in the test section is analyzed. The parameters of the permanent magnet to be used in the model inside the test section are investigated. The testing of magnetic fields at the center of a test pipe and validation of data by computer finite element analysis is described with the purpose of finding common results. The performance of the magnet configuration is evaluated with relation to the magnetic …

Nonlinear Constrained Optimizer And Parallel Processing For Golden Block Line Search, Duc T. Nguyen, Wilson H. Tang, Yeou K. Tung, Hakizumwami B. Runesha

Civil & Environmental Engineering Faculty Publications

Generalized exponential penalty functions are constructed for the multiplier methods in solving nonlinear programming problems. The non-smooth extreme constraint Gext is replaced by a single smooth constraint Gs by using the generalized exponential function (base a>1). The well-known K.S. function is found to be a special case of our proposed formulation. Parallel processing for Golden block line search algorithm is then summarized, which can also be integrated into our formulation. Both small and large-scale nonlinear programming problems (up to 2000 variables and 2000 nonlinear constraints) have been solved to validate the proposed algorithms.

Time-Resolved Reflection High-Energy Electron Diffraction Study Of The Ge(111)-C(2×8)-(1×1) Phase Transition, Xinglin Zeng, Bo Lin, Ibrahim El-Kholy, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The dynamics of the Ge(111)-c(2×8)-(1×1) phase transition is investigated by 100-ps time-resolved reflection high-energy electron diffraction. A laser pulse heats the surface while a synchronized electron pulse is used to obtain the surface diffraction pattern. Slow heating shows that the adatoms in Ge(111)-c(2×8) start to disorder at ∼510 K and are converted to a disordered adatom arrangement at 573 K. For heating with 100-ps laser pulses, the Ge(111)-c(2×8) reconstructed adatom arrangement starts to disorder at 584±16K, well above the onset temperature of ∼510 K for the disordering of Ge(111)-c(2×8) observed for slow …

Smart Objects, Dumb Archives: A User-Centric, Layered Digital Library Framework, Kurt Maly, Michael L. Nelson, Mohammad Zubair

Computer Science Faculty Publications

Discusses digital libraries, interoperability, and interfaces to access them, and proposes one universal protocol for communication for simple archives based on the hypertext transfer protocol (http). Describes the creation of a special class of digital objects called buckets, archives based on a NASA collection, and a set of digital library services. (Author/LRW)

Compute As Fast As The Engineers Can Think! Utrafast Computing Team Final Report, Robert T. Biedron, P. Mehrotra, Michael L. Nelson, M. L. Preston, J. J. Rehder, J. L. Rogersm, D. H. Rudy, J. Sobieski, O. O. Storaasli

Computer Science Faculty Publications

This report documents findings and recommendations by the Ultrafast Computing Team (UCT). In the period 10-12/98, UCT reviewed design case scenarios for a supersonic transport and a reusable launch vehicle to derive computing requirements necessary for support of a design process with efficiency so radically improved that human thought rather than the computer paces the process. Assessment of the present computing capability against the above requirements indicated a need for further improvement in computing speed by several orders of magnitude to reduce time to solution from tens of hours to seconds in major applications. Evaluation of the trends in computer …

A Digital Library For The National Advisory Committee For Aeronautics, Michael L. Nelson

Computer Science Faculty Publications

We describe the digital library (DL) for the National Advisory Committee for Aeronautics (NACA), the NACA Technical Report Server (NACATRS). The predecessor organization for the National Aeronautics and Space Administration (NASA), NACA existed from 1915 until 1958. The primary manifestation of NACA's research was the NACA report series. We describe the process of converting this collection of reports to digital format and making it available on the World Wide Web (WWW) and is a node in the NASA Technical Report Server (NTRS). We describe the current state of the project, the resulting DL technology developed from the project, and the …

Multidisciplinary Sensitivity Analysis And Design Optimization Of Flexible Wings Using The Euler Equations On Unstructured Grids, Arunkumar Satyanarayana

Mechanical & Aerospace Engineering Theses & Dissertations

Aeroelasticity is a classical discipline. However, even with recent advancement in computational technology, it still remains a challenging discipline. This is particularly true when aeroelasticity problems are solved in a loosely coupled manner. The advantage of a loosely coupled scheme is that the legacy codes of computational fluid dynamics (CFD) and computational structural mechanics (CSM) can be preserved and used as independent modules in solving the desired aeroelasticity problems. In such a scheme, maintaining proper data transfer (load transfer and deformation tracking between CFD and CSM codes) is crucial in ensuring successful coupled solutions. This can be a challenging task …

Computational Modeling Of Airborne Noise Demonstrated Via Benchmarks, Supersonic Jet, And Railway Barrier, Moumen Idres

Mechanical & Aerospace Engineering Theses & Dissertations

In the last several years, there has been a growing demand for mobility to cope with the increasing population. All kinds of transportation have responded to this demand by expanding their networks and introducing new ideas. Rail transportation introduced the idea of high-speed trains and air transportation introduced the idea of high-speed civil transport (HSCT). In this expanding world, the noise legislation is felt to inhibit these plans. Accurate computational methods for noise prediction are in great demand.

In the current research, two computational methods are developed to predict noise propagation in air. The first method is based on the …

Efficient Dynamic Unstructured Methods And Applications For Transonic Flows And Hypersonic Stage Separation, Xiaobing Luo

Mechanical & Aerospace Engineering Theses & Dissertations

Relative-moving boundary problems have a wide variety of applications. They appear in staging during a launch process, store separation from a military aircraft, rotor-stator interaction in turbomachinery, and dynamic aeroelasticity.

The dynamic unstructured technology (DUT) is potentially a strong approach to simulate unsteady flows around relative-moving bodies, by solving time-dependent governing equations. The dual-time stepping scheme is implemented to improve its efficiency while not compromising the accuracy of solutions. The validation of the implicit scheme is performed on a pitching NACA0012 airfoil and a rectangular wing with low reduced frequencies in transonic flows. All the matured accelerating techniques, including the …

Skin-Stiffener Separation In Buckled Composite Plates And Shallow Shells, Mark Edward Robeson

Mechanical & Aerospace Engineering Theses & Dissertations

The development of an approximate analysis for predicting stresses in the skin-stiffener interface region of composite plates and shallow shells is presented. The analysis determines interlaminar normal stress and transverse shear stresses in the direction of the stiffener axial coordinate and the direction of the inplane coordinate perpendicular to the stiffener axis. The analysis accounts for skin-stiffener interfaces with nonzero thickness and for curvature in the skin and stiffener. The interlaminar normal stress and transverse shear stresses at the interface are applied to the lower face of the skin and the upper face of the stiffener flange as unknown functions, …

Variability Analysis Of Discrete Cosine Transform Coefficient (Dctc) Features For Speech Processing, Bingjun Dai

Electrical & Computer Engineering Theses & Dissertations

In this research, the variability of Discrete Cosine Transform Coefficient (DCTC) features was investigated. Additionally, a new pitch-synchronous processing method was explored to increase the stability of features and to reduce window effects when compared to the regular method. The noise sources that lead to feature variability were analyzed, and different smoothing methods were tested. It was found that longer frames, frequency warping, time smoothing of the log spectrum, and DCS level time smoothing, all help reduce DCTC variability and increase classification performance. The pitch­ synchronous method was implemented with Matlab. Important processing methods, including pitch period estimation, time­ domain …

Computer Simulations Of Electromigration Based On A Molecular Dynamics Approach, John Stephen Peake

Electrical & Computer Engineering Theses & Dissertations

Most research on electromigration has centered around macroscopic simulations of electromigration where a value for the diffusion coefficient was assumed to be spatially uniform throughout the material. The research in this thesis goes a step further and, through microscopic molecular dynamics computer simulations, calculates and updates the atomic drift velocity and atomic position as a function of time to analyze how various defects within the conductor affect these quantities. The simulations are carried out with defects in the form of dislocation half-planes placed in different locations within the simulation space. The atomic drift velocity and position changes derived from these …

Saturation Control For Reduction Of Rotor Blade Lag Vibration, Sayam Saguanrum

Mechanical & Aerospace Engineering Theses & Dissertations

Within the context of this research, the performance of saturation control for reduction in the vibratory lag motion of helicopter rotor blades is investigated. The single-degree-of-freedom plant, which consists of a spring and damper attached to the rotor blade, is perturbed by an aerodynamic force, and produces the unwanted vibration. To restrict this vibration, the second-order controller is provided to couple with the blade system. It works adaptively, when the system is excited and the controller frequency is set at half of the blade lag frequency in accordance with the relationship of both natural frequencies. The nonlinear terms from the …

Modeling And Simulation Of High-Field, High-Temperature Sic Devices, Sanjay Pathak

Electrical & Computer Engineering Theses & Dissertations

With superior properties such as a large band gap, high thermal conductivity, and large electron drift velocity, SiC is expected to give a new dimension to high power, high temperature electronic devices used in power applications, microwave circuits, and for the space and automobile industries. SiC possesses an inherent advantage over its other large bandgap competitors in terms of inherited processing and device technology from Si. However, there is inadequate understanding of SiC device and its parameters. Simple extrapolations from Si are known to be inadequate. The aim of this dissertation, therefore. is to produce better understanding of SiC devices …

Two Dimensional, Time Dependent Modeling And Simulation Of Semi-Insulating Gaas High-Power Photoconductive Switches, Prakasit Kayasit

Electrical & Computer Engineering Theses & Dissertations

The current-voltage (I-V) characteristics and photoconductive behavior of semi-insulating GaAs (SI GaAs) high-power switches have been investigated by using a two-dimensional, time dependent, drift diffusion transport model. The dc current-voltage behavior as predicted by the results of this model was compared with available experimental data to evaluate the accuracy and validity of the model. The results show very good agreement, Next, research was carried out to investigate the behavior of the switches under high-field operation.

Simulations at high voltages emphasize on the two following processes: (a) The mechanism of impact ionization and the effect of this mechanism on device stability …

Design Optimization Of Magnetic Bearings And Magnetic Suspension Systems, V. Dale Bloodgood Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Magnetic suspension systems were first demonstrated as practical by Holmes and Beams in the 1930's. Since then, numerous academic researchers have worked with various types of these systems. Commercial applications have largely been limited to magnetic bearings for rotating machinery. Other applications that have held considerable promise include wind tunnel model suspensions, space payload pointing and vibration isolation systems, satellite momentum storage and control devices and electromagnetic launch systems. However, none of these have progressed significantly beyond the prototype stage. Maglev trains have not reached serious commercial service but are being aggressively developed in Germany and Japan.

Design methods for …

Architectural Optimization Of Digital Libraries, Aileen O. Biser

Computer Science Theses & Dissertations

This work investigates performance and scaling issues relevant to large scale distributed digital libraries. Presently, performance and scaling studies focus on specific implementations of production or prototype digital libraries. Although useful information is gained to aid these designers and other researchers with insights to performance and scaling issues, the broader issues relevant to very large scale distributed libraries are not addressed. Specifically, no current studies look at the extreme or worst case possibilities in digital library implementations. A survey of digital library research issues is presented. Scaling and performance issues are mentioned frequently in the digital library literature but are …

The Cluster Multipole Algorithm For Far-Field Computations, Rakesh R. Patel

Electrical & Computer Engineering Theses & Dissertations

Computer simulations of N-body systems are beneficial to study the overall behavior of a number of physical systems in fields such as astrophysics, molecular dynamics, and computational fluid dynamics. A new approach for computer simulations of N-body systems is proposed in this research. The new algorithm is called the Cluster Multipole Algorithm (CMA). The goals of the new algorithm are to improve the applicability to non-point sources and to provide more control on the accuracy over current algorithms. The algorithm is targeted to applications that do not require rebuilding the data structure about the system every time step due to …