Engineering Commons^™

Nonthermal Laser-Induced Formation Of Crystalline Ge Quantum Dots On Si(100), M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The effects of laser-induced electronic excitations on the self-assembly of Ge quantum dots on Si (100) - (2×1) grown by pulsed laser deposition are studied. Electronic excitations due to laser irradiation of the Si substrate and the Ge film during growth are shown to decrease the roughness of films grown at a substrate temperature of ∼120 °C. At this temperature, the grown films are nonepitaxial. Electronic excitation results in the formation of an epitaxial wetting layer and crystalline Ge quantum dots at ∼260 °C, a temperature at which no crystalline quantum dots form without excitation under the same deposition conditions. …

Plasma Medicine, Mounir Laroussi, Alexander Fridman

Electrical & Computer Engineering Faculty Publications

Recent demonstrations of plasma technology in the treatment of living cells, tissues, and organs are creating a newfield at the intersection of plasma science and technology with biology and medicine - Plasma Medicine.

Electron Density And Temperature Measurement Of An Atmospheric Pressure Plasma By Millimeter Wave Interferometer, Xinpei Lu, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

In this paper, a 105 GHz millimeter wave interferometer system is used to measure the electron density and temperature of an atmospheric pressure helium plasma driven by submicrosecond pulses. The peak electron density and electron-neutral collision frequency reach 8 X 10¹² cm^-3 and 2.1 X 10¹² s^-1, respectively. According to the electron-helium collision cross section and the measured electron-neutral collision frequency, the electron temperature of the plasma is estimated to reach a peak value of about 8.7 eV.

Applying Six Sigma Methodology To The Admissions Process In Higher Education, Alok Verma

Engineering Technology Faculty Publications

Time and quality are two important metrics for improving a company's production and profit performance. Six Sigma is one of the most powerful continuous improvement tools that have been used to improve the quality of products and business processes. Six Sigma methodology provides the techniques and tools to improve the capability and reduce the number of defects in any process. It was originally developed by Motorola to systematically improve processes by eliminating defects. Although, originally developed for manufacturing processes, the tool has been effectively applied to improve business processes also. Evaluation of applications for admission in higher education is often …

Creating Preservation-Ready Web Resources, Joan A. Smith, Michael L. Nelson

Computer Science Faculty Publications

There are innumerable departmental, community, and personal web sites worthy of long-term preservation but proportionally fewer archivists available to properly prepare and process such sites. We propose a simple model for such everyday web sites which takes advantage of the web server itself to help prepare the site's resources for preservation. This is accomplished by having metadata utilities analyze the resource at the time of dissemination. The web server responds to the archiving repository crawler by sending both the resource and the just-in-time generated metadata as a straight-forward XML-formatted response. We call this complex object (resource + metadata) a CRATE. …

Emergent Behavior In Massively-Deployed Sensor Networks, Ekaterina Shurkova, Ruzana Ishak, Stephan Olariu, Shaharuddin Salleh

Computer Science Faculty Publications

The phenomenal advances in MEMS and nanotechnology make it feasible to build small devices, referred to as sensors that are able to sense, compute and communicate over small distances. The massive deployment of these small devices raises the fascinating question of whether or not the sensors, as a collectivity, will display emergent behavior, just as living organisms do. In this work we report on a recent effort intended to observe emerging behavior of large groups of sensor nodes, like living cells demonstrate. Imagine a massive deployment of sensors that can be in two states "red" and "blue". At deployment time …

Efficient Corona Training Protocols For Sensor Networks, Alan A. Bertossi, Stephan Olariu, Cristina M. Pinotti

Computer Science Faculty Publications

Phenomenal advances in nano-technology and packaging have made it possible to develop miniaturized low-power devices that integrate sensing, special-purpose computing, and wireless communications capabilities. It is expected that these small devices, referred to as sensors, will be mass-produced and deployed, making their production cost negligible. Due to their small form factor and modest non-renewable energy budget, individual sensors are not expected to be GPS-enabled. Moreover, in most applications, exact geographic location is not necessary, and all that the individual sensors need is a coarse-grain location awareness. The task of acquiring such a coarse-grain location awareness is referred to as training. …

Catalytic Wet Air Oxidation Of Mono Azo Dye Orange Ii: Catalyst Selection, Reaction Kinetics, And Modeling, Pinar Ozdural

Civil & Environmental Engineering Theses & Dissertations

Wastewaters generated as byproducts of dyeing processes are not treatable with conventional methods. It has been estimated that among the 900,000 tons of different dyes produced annually in the world, approximately 10–15% are lost in wastewater streams during manufacturing and processing operations. Once in rivers and streams, dyes cause major problems, such as reducing light penetration, or displaying toxic effects on aquatic life. Therefore, it is essential that dyes are removed from wastewaters before being discharged into the environment.

This study focuses on the catalytic wet air oxidation (CWAO) of Orange II, a mono azo dye used in large amounts …

Hypersonic Boundary Layer Receptivity To Acoustic Disturbances Over Cones, Kursat Kara

Mechanical & Aerospace Engineering Theses & Dissertations

The receptivity mechanisms of hypersonic boundary layers to free stream acoustic disturbances are studied using both linear stability theory (LST) and direct numerical simulations (DNS). A computational code is developed for numerical simulation of steady and unsteady hypersonic flow over cones by combining a fifth-order weighted essentially non-oscillatory (WENO) scheme with third-order total-variation-diminishing (TVD) Runge-Kutta method. Hypersonic boundary layer receptivity to free-stream acoustic disturbances in slow and fast modes over 5-degree, half-angle blunt cones and wedges are numerically investigated. The free-stream Mach number is 6.0, and the unit Reynolds number is 7.8×106/ft. Both the steady and unsteady solutions are obtained …

Experimental Investigation Of Active Control Of Bluff Body Vortex Shedding, Ilteris Koc

Mechanical & Aerospace Engineering Theses & Dissertations

Mean and fluctuating forces acting on a body are strongly related to vortex shedding generated behind it. Therefore, it is possible to obtain substantial reductions of at least the unsteady forces if vortex shedding is controlled or its regularity is reduced. While conventional active flow control methods are mainly concerned with direct interaction with, and alteration of, the mean flow about a body, modern techniques involve altering existing flow instabilities using relatively small inputs to obtain large-scale changes of mean flows. Aerodynamic flow control may be intended to delay or suppress boundary layer separation through creation of a boundary layer …

Effects Of Leader Relationship Quality (Lmx), Supervisor Support, And Upward Influence In National Science Foundation Industry /University Cooperative Research Centers, Janet L. Bryant

Psychology Theses & Dissertations

The Industry/University Cooperative Research Center (I/UCRC) is a type of partnership between industries and universities supported by the National Science Foundation. These partnerships enable the transfer of leading-edge technology developed in universities to industrial firms. Leadership plays a powerful role in the success of these research partnerships by creating an environment that is conducive to innovation. Directors of I/UCRCs must be able to successfully lead upward, that is, develop and maintain strong relationships with the university administrators to whom they report, to obtain the necessary support to sustain the center and foster innovation. This study uses leader-member exchange (LMX) theory …

Metal Modulation Epitaxy Growth For Extremely High Hole Concentrations Above 10(19) Cm(-3) In Gan, Gon Namkoong, Elaissa Trybus, Kyung Keun Lee, Michael Moseley, W. Alan Doolittle, David C. Look

Applied Research Center Publications

The free hole carriers in GaN have been limited to concentrations in the low 10¹⁸ cm⁻³ range due to the deep activation energy, lower solubility, and compensation from defects, therefore, limiting doping efficiency to about 1%. Herein, we report an enhanced doping efficiency up to ~10% in GaN by a periodic doping, metal modulation epitaxy growth technique. The hole concentrations grown by periodically modulating Ga atoms and Mg dopants were over ~1.5 x 10¹⁹ cm⁻³.

© 2008 American Institute of Physics.

Lazy Preservation: Reconstructing Websites From The Web Infrastructure, Frank Mccown

Computer Science Theses & Dissertations

Backup or preservation of websites is often not considered until after a catastrophic event has occurred. In the face of complete website loss, webmasters or concerned third parties have attempted to recover some of their websites from the Internet Archive. Still others have sought to retrieve missing resources from the caches of commercial search engines. Inspired by these post hoc reconstruction attempts, this dissertation introduces the concept of lazy preservation{ digital preservation performed as a result of the normal operations of the Web Infrastructure (web archives, search engines and caches). First, the Web Infrastructure (WI) is characterized by its preservation …

A Modular Kernel Linear Discriminant Analysis Of Gabor Features For Improved Face Recognition, Neeharika Gudur

Electrical & Computer Engineering Theses & Dissertations

Automatic face recognition is one of the major challenges in computer vision and pattern analysis. This thesis presents an efficient face recognition system that is robust with regards to changes in illumination, facial expressions and partial occlusions. Modular Kernel Linear Discriminant Analysis performed on Gabor Features obtained from the face images is employed for improving face recognition accuracy. A face image is pre-processed using the 2D Gabor wavelet transform to achieve invariance to illumination in images. Modular approaches that divide the pre-processed images into smaller sub-images provide improved accuracy, as the facial variations in an image are confined to local …

Electroactive Polymers (Eap): Simulation Studies Of The Actuation Mechanisms In A Cantilever Cellulose Electroactive Paper, Fatim A. Mbaye

Electrical & Computer Engineering Theses & Dissertations

Electroactive polymers (EAPs) exhibit large strain in response to an external electric field and have attracted a great deal of attention in recent years for sensor and actuator applications. Favorable properties include soft actuation, ease and simplicity in manufacturing, being light-weight, low power consumption, and the ability to withstand harsh environments. However, this is an emerging material, and several aspects, including the fundamental mechanisms for piezoelectric deflections, remain unclear. This project studies the internal electromechanical factors that contribute to the voltage induced deflections of electro-active paper (EAPap). Experimental measurements of bias dependent deflections and water absorption as a function of …

Neighborhood Defined Adaboost Based Mixture Of Color Components For Efficient Skin Segmentation, Ramya Reddy Maaram

Electrical & Computer Engineering Theses & Dissertations

A skin segmentation algorithm robust to illumination changes and skin-like backgrounds is developed in this thesis. So far skin pixel classification has been limited to only individual color spaces and there has not been a comprehensive evaluation of which color components or combination of color components would provide the best classification accuracy, Color components in a given color space form the feature set for the classification of skin pixels. The combination of the color components or the features present within a single color space may not be the best when it comes to skin pixel classification as the discriminatory power …

Microfabrication Of An Optical Chamber For Exposing Living Cells To Pulsed Electric Fields, Saleh Sheikh

Electrical & Computer Engineering Theses & Dissertations

I have fabricated a chamber which enables the application of Nanosecond Pulsed Electric Fields (nsPEFs) to living cells while monitoring their real time fluorescence with an inverted microscope. The No. I thickness (150µm nominal) coverslip glass substrate used for fabrication allows the use of high numerical aperture oil immersion objectives for imaging intracellular organelles. Electrodes are fabricated by first evaporating a chromium adhesion layer, followed by a nickel seed layer. Subsequently, an ultra-thick positive photoresist is applied and patterned to create a 30µm thick electroplating mold. The electrodes are then electrodeposited into the mold from a nickel sulfamate plating bath. …

Integrating Game Technology And Discrete Event Simulation To Analyze Mass Casualty Scenarios, Jason Loveland

Computational Modeling & Simulation Engineering Theses & Dissertations

In the last 10 years, video games have become complex simulation environments with high resolution 3D graphics enabled by powerhouse rendering engines, multi-player client server networks, user friendly displays and graphical user interface , while remaining relatively inexpensive. There is a critical need for systems engineering analysis and rapid trade studies due to changes in operations caused by current events such as terrorist attacks, asymmetric threats, natural disasters, etc. Modem games provide a unique way to visualize and interact with these complex environments, scenarios, missions, and operations. A discrete event simulator (DES) provides an environment to model system architecture behavior, …

Bactericidal Effects Of Cold Plasma Technology On Geobacillus Stearothermophilus And Bacillus Cereus Microorganisms, Angela D. Morris, Gayle B. Mccombs, Susan L. Tolle, Mounir Laroussi, Wayne L. Hynes

Dental Hygiene Faculty Publications

Cold plasma is a state of matter that contains a large number of particles that are electrically charged. Plasmas generate chemically reactive species and ultraviolet radiation making them useful in decontamination applications (Kong & Laroussi, 2003). Research regarding the inactivation of gram-positive bacteria by cold plasma has been studied by Laroussi et al (2003); however, there is limited research regarding the germicidal effectiveness of cold plasma on Geobacillus stearothermophilus and Bacillus cereus microorganisms. The purpose of this study was to determine if cold plasma technology inactivates Geobacillus stearothermophilus and Bacillus cereus vegetative cells and spores. This study consisted of 981 …

Simulation To Augment Standardized Patients In Obstetric Ultrasound Training, Scott Richard Guirlinger

Computational Modeling & Simulation Engineering Theses & Dissertations

Standardized patients are actors used in medical training to teach and eval11atc clinical skills of students prior to their using these skills on an actual patient. Augmented Reality is a relatively new technology that can be used to augment standardized patients with abnonnalitie8 and pathologies that they cannot portray themselves as normal healthy human beings. In our project, we sought to augment standardized patients with a 12-week- old fetus in order to train and possibly evaluate medical students and professionals in performing obstetric ultrasound procedures and interpreting the corresponding ultrasound image results.

The software library ARToolkit provided the framework for …

A Robust Method For Multiple Face Tracking Using Kalman Filter, Zaheer Shaik

Electrical & Computer Engineering Theses & Dissertations

A robust method for tracking faces of multiple people moving in a scene using a Kalman filter is proposed. This method overcomes the problem of partial and total occlusion for a short period. The method uses a combination of face detection and cloth matching to track and differentiate between people. A Template matching technique for face and a non-parametric distribution for cloth are used. Face templates are obtained from the first frame of a video sequence by applying the Viola-Jones face detection method. Cloth color distribution is obtained from people's clothes, assuming that the bodies move along with the faces. …

Active Control Of Nonlinear Panel Flutter At Supersonic Speed Using Aeroelastic Modes And Self-Sensing Piezoelectric Actuators Under Yawed Flow Angle, Myounghee Kim

Mechanical & Aerospace Engineering Theses & Dissertations

Suppression of nonlinear panel flutter at supersonic speeds has been investigated traditionally with system equations of motion in terms of in vacuo modal coordinates. For isotropic and symmetrically laminated orthotropic composite plates, the limit-cycle oscillations converged with six in vacuo natural modes at zero yaw angle. However, as laminated composite plates undergo the effect of an arbitrary yawed flow angle, complicated characteristics emerge when increasing the required in vacuo natural modes for an analysis of limit-cycle oscillations. In order to design an effective controller, the large number of modes should be reduced. As a result, the small number of modes …

Stochastic Optimization Formulations For Structure Design, Shivanandini Tanuku

Mechanical & Aerospace Engineering Theses & Dissertations

The production process and the operational environment of a product usually involve many unpredictable elements, such as the manufacturing tolerance, the service loads, the maintenance schedule, etc. Furthermore, the targeted functionality of a product can also be alternated or enhanced in its service life due to the technology advancement, new demands, or new regulation. It is thus a challenge to a designer to include these uncertainties in the early design stage of a product.

This thesis uses a simple three-bar truss problem as a vehicle to investigate the qualities of the optimal solutions resulted from various stochastic programming formulations. The …

Distributed Cluster-Based Outlier Detection In Wireless Sensor Networks, Swetha Gali

Electrical & Computer Engineering Theses & Dissertations

Wireless sensor networks find several potential applications in a variety of fields, such as environmental monitoring and control, battlefields, surveillance, smart buildings, human health monitoring, etc. These sensor networks consist of a large number of very tiny, inexpensive, and low power sensor nodes, which are deployed in a variety of harsh environments that may result in the sensor data getting corrupted. It is thus critical to detect and report these abnormal values in the sensor data, in order to have a better understanding of the monitored environment. Detection of the abnormal values is of special interest for the sensor network …

An Adaptive And Non-Linear Technique For Enhancement Of High Contrast Images, Saibabu Arigela

Electrical & Computer Engineering Theses & Dissertations

In night time surveillance, there is a possibility of having extremely bright and dark regions in some image frames of a video sequence. Neither the object details in the low intensity areas nor in the high intensity areas can be clearly interpreted. Several image processing techniques have been developed to retrieve meaningful information under low lighting conditions. The algorithm based on integrated neighborhood dependency of pixel characteristics, and that based on the illuminance reflectance model perform well for improving the visual quality of digital images captured under extremely low and nonuniform lighting conditions. But these techniques cannot perform well in …

Self-Organization In Cathode Boundary Layer Discharges, Nobuhiko Takano

Electrical & Computer Engineering Theses & Dissertations

Cathode boundary layer (CBL) discharge, which has been developed as a UV light source, operates in a direct current between a planar cathode and a ring-shape anode that are separated by a dielectric with an opening of the same diameter as the anode. The nonthermal CBL discharges operate in a medium pressure range down to 30 Torr, emitting excimer radiation when operated with noble gases. The radiant excimer emittance at 172 nm in xenon reaches 1.7 W/cm², and a maximum excimer efficiency of 6 % has been obtained. The high excimer radiant emittance, in addition to low cost …

Radical Impact Of Change In Actions And Confidence Index On Reverse Decision Making An Application Based Study, Swatee Trimbak Paithankar

Engineering Management & Systems Engineering Theses & Dissertations

While making decisions under uncertainty, people are often unaware of the logical approach to form the decision process. It is assumed that collecting details, analyzing and evaluating data is enough to make 'proper' decisions. However, past research in the decision making arena has significantly validated that there exists a class of decision problems which is complex, ill-structured and not defined to the level where decision makers can draw logical conclusions based on existing traditional decision approaches. RDM (reverse decision making), one of the novel approaches of decision making under conditions of uncertainty, has shown potential towards addressing some of these …

Simulation And Thermo-Economic Analysis Of A Solar-Assisted Heat Pump System For Domestic Water Heating Application, Vaibhav D. Gagrani

Mechanical & Aerospace Engineering Theses & Dissertations

The present study examines the potential of solar-assisted heat pump (SAHP) system for domestic water heating application over conventional electrical water heating system. The focus of study is on developing a user-friendly and interactive software using Java platform with Microsoft Access being used for maintaining the database. The software developed is capable of predicting the thermal and economic performance of a SAHP system under varying conditions. The software allows the user to select the geographic location, specify condensing temperature, collector, and compressor parameters, and thermal load requirement. Location specific meteorological data, such as latitude, solar radiation, and ambient temperature, are …

Parmela Based Simulations On Jefferson Lab Free Electron Laser Injector, Deepesh Kumar Koppunuru

Electrical & Computer Engineering Theses & Dissertations

Free Electron Lasers (FELs) have many applications and are under continuing development to meet various needs and in areas from materials processing to life sciences research. This is because of its unique capability of generating high-average power, coherent, and wavelength tunable light by employing relativistic beam of un-bounded electrons. The main challenge in FEL development is the generation of a high intensity, high-quality electron beam in an injector. Further acceleration to relativistic energies is accomplished in a linear accelerator (LINAC) for producing laser light in a device known as wiggler. The Jefferson Lab FEL team intents to increase the injector …

Channel Management In Heterogeneous Cellular Networks, Mohammad Hadi Arbabi

Computer Science Theses & Dissertations

Motivated by the need to increase system capacity in the face of tight FCC regulations, modem cellular systems are under constant pressure to increase the sharing of the frequency spectrum among the users of the network.

Key to increasing system capacity is an efficient channel management strategy that provides higher capacity for the system while, at the same time, providing the users with Quality of Service guarantees. Not surprisingly, dynamic channel management has become a high profile topic in wireless communications. Consider a highly populated urban area, where mobile traffic loads are increased due to highway backups or sporting events. …