Engineering Commons^™

Uncertainty Assessment Of Aircraft Maintenance Times By Using Evidence Theory And Expert Judgment Elicitation, Huseyin Kudak

Engineering Management & Systems Engineering Theses & Dissertations

The goal of this study is to demonstrate the use of the Dempster-Shafer Theory of evidence as a decision aid to predict aircraft maintenance times during wartime operations using expert judgment elicitation. Increased precision in time estimation enables the jet engine aircraft maintenance facility commander to make more accurate decisions for the Air Force's wartime tactical operations allowing the commander to gain a decisive advantage. A questionnaire was designed to elicit judgments from experts in the Aircraft Maintenance Facility (AMF) to investigate maintenance times of the major failure modes (Ignition, Fuel, and Electrical). Results of the expert judgment elicitation were …

Evaluation Of The Applicability Of Jc3iedm Based Information Exchange Standardization Efforts To Link-16 Based Systems, Anthony Devivi

Computational Modeling & Simulation Engineering Theses & Dissertations

Command and Control (C2) systems are critical components in decision-making systems in both the military and civilian domains. These systems act as the data evaluation and dissemination tools for larger Command, Control, Computer, Communication, Intelligence, Surveillance, and Recognizance (C4ISR) systems. Typical C2 systems accept a wide variety of inputs from many sources such as radars, weapons systems, simulators, operators, and other C2 systems. The C2 system processes the input data and presents to the user information with which decisions are made. The C2 system also determines what information should be translated and disseminated to other C2 platforms.

The basis for …

Adaptive Control Of Large Amplitude Nonlinear Free Vibrations Of Composite Shallow Shells Using System Identification And Self-Sensing Piezoelectric Actuators, Minseock Park

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled structural-electrical nonlinear modal finite element formulation for anti-symmetrical laminated composite shallow shells with embedded piezoelectric sensors and actuators is presented for the suppression of large-amplitude nonlinear free vibrations. The triangular shallow shell finite element is utilized, which is developed &om an extension of the triangular Mindlin (MIN3) element with the improved shear correction factor. The system equations of motion are first derived in the physical structural-node degrees of freedom (DOF), However, numerical simulation in structural-node DOF is costly in computation due to the large size of system matrices, and the nonlinear terms have to be updated at each …

Real-Time Ultrasound Simulation For Medical Training And Standardized Patient Assessment, Bo Sun

Computational Modeling & Simulation Engineering Theses & Dissertations

With the increasing role played by ultrasound in clinical diagnostics, ultrasound training in medical education has become more and more important. The clinical routine for ultrasound training is on real patients; therefore monitored and guided examinations involving medical students are quite time-constrained. Furthermore, standardized patients (SPs), who are increasingly used in medical school for teaching and assessing medical students, need to be augmented. These SPs are typically healthy individuals who can not accurately portray the variety of abnormalities that are needed for training especially when medical examinations involve instrument interactions. To augment SPs in a realistically effective way and also …

Caffeine Model Identification For Vigilance Performance Prediction, Chun-Hui Huang

Mechanical & Aerospace Engineering Theses & Dissertations

The pharmacodynamics and pharmacokinetics of caffeine have been well characterized. In this study, a caffeine dynamic model is developed to describe its pharmacodynamic effects on vigilance performance. Validated biomathematical models developed to address both individual and group fatigue and alertness in a non-laboratory setting represent a tremendous commercial opportunity. First, a test data set with caffeine effects isolated from circadian and homeostatic effects is created. Then a modeling approach for input and output effects is developed and different model structures for the caffeine effects are considered. Observer/Kalman filter Identification (OKID) algorithm is proposed and developed to identify the caffeine model …

Community-Of-Interest (Coi) Model-Based Languages Enabling Composable Net-Centric Services, Andreas Tolk, Saikou Y. Diallo

Computational Modeling & Simulation Engineering Faculty Publications

Net-centric services shall be designed to collaborate with other services used within the supported Community of Interest (COI). This requires that such services not only be integratable on the technical level and interoperable on the implementation level, but also that they are composable in the sense that they are semantically and pragmatically consistent and able to exchange information in a consistent and unambiguous way.

In order to support Command-and-Control with Composable Net-centric Services, the human-machine interoperation must be supported as well as the machine-machine interoperation. This paper shows that techniques of computer linguistic can support the human-machine interface by structuring …

Differences In The Performance Of Knowledge Transfer Across Projects: A Study Of Gender And Role Of Key Project Stakeholders, Rafael E. Landaeta, Catherine Vergopia, Rey N. Diaz

Engineering Management & Systems Engineering Faculty Publications

This investigation contributes empirical results of differences identified in key project stakeholders with respect to their use of knowledge transferred across projects. Gender and role were the two individual characteristics investigated. Project managers and members of project teams were the key stakeholders analyzed. Data was collected from 71 closed projects using a survey composed of closed-ended questions. The data collected was cross tabulated and statistically analyzed using Friedman's test and Spearman's correlation. The results provide evidence of the association of the performance of knowledge transfer across projects with (a) the individual factors of gender and role of key project stakeholders …

Kilovolt Blumlein Pulse Generator With Variable Pulse Duration And Polarity, Andrea De Angelis, Juergen F. Kolb, Luigi Zeni, Karl H. Schoenbach

Bioelectrics Publications

A Blumlein pulse generator which utilizes the superposition of electrical pulses launched from two individually switched pulse forming lines has been designed and tested. By using a power metal-oxide-semiconductor field-effect transistor as a switch on each end of the Blumlein line, we were able to generate pulses with amplitudes of 1kV across a 100Ω load. Pulse duration and polarity can be controlled by the temporal delay in the triggering of the two switches. Using this technique, we have demonstrated the generation of pulses with durations between 8 and 60ns. The lower limit in pulse duration was determined by the switch …

Massive Spatiotemporal Watershed Hydrological Storm Event Response Model (Mhserm) With Time-Lapsed Nexrad Radar Feed, Changqing Song

Civil & Environmental Engineering Theses & Dissertations

Correctly and efficiently estimating hydrological responses corresponding to a specific storm event at the streams in a watershed is the main goal of any sound water resource management strategy. Methods for calculating a stream flow hydrograph at the selected streams typically require a great deal of spatial and temporal watershed data such as geomorphological data, soil survey, landcover, precipitation data, and stream network information to name a few. However, extracting and preprocessing such data for estimation and analysis is a hugely time-consuming task, especially for a watershed with hundreds of streams and lakes and complicated landcover and soil characteristics. To …

Nonlinear Random Response Of Large-Scale Sparse Finite Element Plate Bending Problems, Swati Chokshi

Civil & Environmental Engineering Theses & Dissertations

Acoustic fatigue is one of the major design considerations for skin panels exposed to high levels of random pressure at subsonic/supersonic/hypersonic speeds. The nonlinear large deflection random response of the single-bay panels aerospace structures subjected to random excitations at various sound pressure levels (SPLs) is investigated. The nonlinear responses of plate analyses are limited to determine the root-mean-square displacement under uniformly distributed pressure random loads. Efficient computational technologies like sparse storage schemes and parallel computation are proposed and incorporated to solve large-scale, nonlinear large deflection random vibration problems for both types of loading cases: (1) synchronized in time and (2) …

Rapid Prototyping For Virtual Environments, Emre Baydogan

Electrical & Computer Engineering Theses & Dissertations

Development of Virtual Environment (VE) applications is challenging where application developers are required to have expertise in the target VE technologies along with the problem domain expertise. New VE technologies impose a significant learning curve to even the most experienced VE developer. The proposed solution relies on synthesis to automate the migration of a VE application to a new unfamiliar VE platform/technology. To solve the problem, the Common Scene Definition Framework (CSDF) is developed, that serves as a superset/model representation of the target virtual world. Input modules are developed to populate the framework with the capabilities of the virtual world …

Design Of A High-Speed Architecture For Stabilization Of Video Captured Under Non-Uniform Lighting Conditions, Ming Zhu Zhang

Electrical & Computer Engineering Theses & Dissertations

Video captured in shaky conditions may lead to vibrations. A robust algorithm to immobilize the video by compensating for the vibrations from physical settings of the camera is presented in this dissertation. A very high performance hardware architecture on Field Programmable Gate Array (FPGA) technology is also developed for the implementation of the stabilization system. Stabilization of video sequences captured under non-uniform lighting conditions begins with a nonlinear enhancement process. This improves the visibility of the scene captured from physical sensing devices which have limited dynamic range. This physical limitation causes the saturated region of the image to shadow out …

Sublethal And Killing Effects Of Atmospheric-Pressure, Nonthermal Plasma On Eukaryotic Microalgae In Aqueous Media, Ying Zhong Tang, Xin Pei Lu, Mounir Laroussi, Fred C. Dobbs

OES Faculty Publications

In-depth studies on the interaction of nonthermal plasmas with microorganisms usually focus on bacteria; only little attention has been given to their effects on more complex eukaryotic cells. We report here nonthermal plasma's effects on cell motility, viability staining, and morphology of eukaryotic microalgae, with three marine dinoflagellates and a marine diatom as major targets. The effects on motility and viability staining depended on the time of exposure to plasma and the species of microalgae. We observed a strong pH decrease in aqueous samples (marine and freshwater algal cultures, their culture media, and deionized water) after exposure to plasma, and …

A New Method Of Synthesizing Black Birnessite Nanoparticles: From Brown To Black Birnessite With Nanostructures, Marcos A. Cheney, Pradip K. Bhowmik, Shizhi Qian, Sang W. Joo, Wensheng Hou, Joseph M. Okoh

Mechanical & Aerospace Engineering Faculty Publications

A new method for preparing black birnessite nanoparticles is introduced. The initial synthesis process resembles the classical McKenzie method of preparing brown birnessite except for slower cooling and closing the system from the ambient air. Subsequent process, including wet-aging at 7° C for 48 hours, overnight freezing, and lyophilization, is shown to convert the brown birnessite into black birnessite with complex nanomorphology with folded sheets and spirals. Characterization of the product is performed by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), thermogravimetric analysis (TGA), and N(2) adsorption ( BET) techniques. Wet-aging and lyophilization times are …

The Effect Of Stirring On The Morphology Of Birnessite Nanoparticles, Marcos A. Cheney, Pradip K. Bhowmik, Shingo Moriuchi, Mario Villabos, Shizhi Qian, Sang W. Joo

Mechanical & Aerospace Engineering Faculty Publications

The effect of mechanical stirring on the morphology of hexagonal layer- structure birnessite nanoparticles produced from decomposition of KMnO₄ in dilute aqueous H₂SO₄ is investigated, with characterization by X- ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high- resolution transmission electron microscopy (HRTEM), thermogravimetric analysis (TGA), and N₂ adsorption (BET). Mechanical stirring during an initial stage of synthesis is shown to produce black birnessite containing nanofibers, whereas granular particulates of brown birnessite are produced without stirring. This is the first reduction synthesis of black birnessite nanoparticles with dendritic morphology without any use …

Reproducible Increased Mg Incorporation And Large Hole Concentration In Gan Using Metal Modulated Epitaxy, Shawn D. Burnham, Gon Namkoong, David C. Look, Bruce Clafin, W. Alan Doolittle

Electrical & Computer Engineering Faculty Publications

The metal modulated epitaxy (MME) growth technique is reported as a reliable approach to obtain reproducible large hole concentrations in Mg-doped GaN grown by plasma-assisted molecular-beam epitaxy on c-plane sapphire substrates. An extremely Ga-rich flux was used, and modulated with the Mg source according to the MME growth technique. The shutter modulation approach of the MME technique allows optimal Mg surface coverage to build between MME cycles and Mg to incorporate at efficient levels in GaN films. The maximum sustained concentration of Mg obtained in GaN films using the MME technique was above 7 × 10²⁰ cm^{-3 …}

Activation Energy Of Surface Diffusion And Terrace Width Dynamics During The Growth Of In (4×3) On Si (100) - (2×1) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The nucleation and growth of indium on a vicinal Si (100) - (2×1) surface at high temperature by femtosecond pulsed laser deposition was investigated by in situ reflection high energy electron diffraction (RHEED). RHEED intensity relaxation was observed for the first ∼2 ML during the growth of In (4×3) by step flow. From the temperature dependence of the rate of relaxation, an activation energy of 1.4±0.2 eV of surface diffusion was determined. The results indicate that indium small clusters diffused to terrace step edges with a diffusion frequency constant of (1.0±0.1) × 10¹¹ s^-1. The RHEED specular …

Review Of The American Society For Engineering Education (Asee) Global Colloquium, Cape Town, South Africa, Philip A. Reed

STEMPS Faculty Publications

The following report addresses topics established by the Technical Foundation of America prior to attending the ASEE Global Colloquium October 19-24, 2008 in Cape Town South Africa. Specifically, this manuscript will address what the international engineering education community and the technology education community might have to offer each other. Responses appear below each of the three categories: impacts on curriculum, professional development, and collaboration.

Development And Validation Of A Dynamic Model Of The Maglev Transportation System At Old Dominion University, Ajinkya Deodhar, Sebastian Bawab, Aravind Hanasoge

Mechanical & Aerospace Engineering Faculty Publications

A dynamic model of the vehicle/guideway coupled with a controller is developed for the maglev demonstration system currently being developed at ODU, using the MAthematical DYnamic MOdeling software - MADYMO. The fundamental characteristics of the vehicle and guideway are obtained from detailed finite element analyses using MSC-NASTRAN. As a result, the vehicle is modeled in MADYMO as a 21- degree-of-freedom spring-mass-damper system. A three span concrete guideway is modeled using 3D solid Hex8 elements. The air gap is modeled as a penetration of the magnets into the guideway. Decentralized colocated PD controllers are used for controlling the penetration of each …

Agent-Based Modeling And Possible Implications On Management And Engineering Management, Ipek Bozkurt, Jose J. Padilla, Andres A. Sousa-Poza

VMASC Publications

Engineering Management (EM) is a discipline that takes pride in bridging two major fields, namely engineering and management. It is clear from any basic research conducted within this field that both engineering and management tools and paradigms need to be used jointly. A mixture that encompasses quantitative and qualitative research, as well as theoretical and empirical research is found in literature, making Engineering Management, as a discipline, very complex in nature. As this complexity evolves, so should the tools of the craft. It is interesting, however, to see that Agent-Based Modeling (ABM) as a tool or as a topic of …

Measuring Agility Of Organizations - A Comprehensive Agility Measurement Tool (Camt), Ameya S. Erande, Alok K. Verma

Engineering Technology Faculty Publications

Since "Agility" is ability to respond to unpredictable changes with quick response and profitability, it is not industry specific. This "not industry specific" nature of agility makes it hard to assess and measure it on a fixed scale. Measurement of agility of an enterprise has been a major topic of research since inception of agility in 1991. Though some methods have been developed to measure agility, they mainly remain tied to manufacturing industry. As agility is present in all the industries, comprehensive tool to measure it is a necessity in order to determine responsiveness of an enterprise to external turbulences. …

Dedication To Pierre Lallemand On The Occasion Of His Retirement, Dominque D'Humieres, Manfred Krafczyk, Li-Shi Luo, Robert Rubinstein

Mathematics & Statistics Faculty Publications

The fourth international conference for mesoscopic methods in engineering and science (http://www.icmmes. org), held in Munich, Germany, 16–20 July 2007, was closed with a celebration honouring Dr Pierre Lallemand on the occasion of his retirement from the Centre National de la Recherche Scientifique (CNRS) after more than 40 years of service.

Exceed Teaching Workshop: Tenth Year Anniversary, Allen Estes, Ronald Welch, Stephen Ressler, Norman Dennis, Debra Larson, Carol Considine, Tonya Nilsson, Jim O'Brien, Thomas Lenox

Engineering Technology Faculty Publications

In response to the need for faculty training, the American Society of Civil Engineers developed and funded the ExCEEd (Excellence in Civil Engineering Education) Teaching Workshop that is today - the summer of 2008 - celebrating its tenth year of existence. For the past decade, nineteen ExCEEd Teaching Workshops (ETW) have been held at the United States Military Academy, the University of Arkansas, and Northern Arizona University, with two more workshops scheduled for this summer for a total of 21 offerings. ETW has realized 449 graduates from 203 different U.S. and international colleges and universities. This paper summarizes the content …

Design And Develop A Cost Effective Microcontroller Training System For Distance Learning Engineering Students, Steve Hsiung, John Ritz, James Eiland

Engineering Technology Faculty Publications

This is the review of a NSF funded project that addresses the hands-on distance learning needs in microprocessor/microcontroller related courses. A research team designed a low cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC), VA and Olympic College (OC), WA, and a four-year university, Old Dominion University (ODU), VA, in a collaborative research team to …

An Integrated Simulation Design With Three-Dimensional Motions And A Hydraulic Stewart Simulator, Cheng Lin, Gene Hou, Yuzhong Shen, Hector Garcia

Engineering Technology Faculty Publications

This paper presents an integrated design process and tests of a Stewart simulator with a virtual visualization tool, which uses Virtools to create and generate three-dimensional motions. An inverse kinematic algorithm is written to convert each visualized motion to the displacements of six cylinders in a Stewart motion simulator. Information of the displacements is then transferred through the User Datagram Protocol (UDP) to a personal computer which has the LabVIEW software. An NI USB-6251 data acquisition device is applied to interact with the LabVIEW program and the Stewart hydraulic simulator. The approach presented in this paper to function an old …

Towards A Metric For The Assessment Of Safety Critical Control Systems, Oscar R. Gonzalez, Jorge R. Chavez-Fuentes, W. Steven Gray

Electrical & Computer Engineering Faculty Publications

There is a need for better integration of the fault tolerant and the control designs for safety critical systems such as aircraft. The dependability of current designs is assessed primarily with measures of the interconnection of fault tolerant components: the reliability function and the mean time to failure. These measures do not directly take into account the interaction of the fault tolerant components with the dynamics of the aircraft. In this paper, a first step to better integrate these designs is made. It is based on the observation that unstable systems are intrinsically unreliable and that a necessary condition for …

Introducing Hands-On Simulation Activities In Introduction To Engineering & Engineering Technology Class To Keep Students Engaged, Alok Verma

Engineering Technology Faculty Publications

Low enrollment and high attrition rates have often plagued Engineering and Engineering Technology programs. Part of this problem can be attributed to the lack of engaging hands-on activities during the first year of instruction. Most engineering and technology programs require students to take natural science, math and some general education courses during the first two years with minimal technical content. To maintain student's interest in the technical career path, it is important that students establish a link between the theoretical knowledge and its application to solve real life problems early in their learning experience. Simulation based activities have a proven …

An Efficient Algorithm For Biomarker Identification, Jiang Li, Rick Mckenzie, Lisa Cazares, Richard Drake, John Semmens

Electrical & Computer Engineering Faculty Publications

No abstract provided.

Seasonal Adaptation Of Vegetation Color In Satellite Images, Srinivas Jakkula, Vamsi K.R. Mantena, Ramu Pedada, Yuzhong Shen, Jiang Li, Hamid R. Arabnia (Ed.)

Electrical & Computer Engineering Faculty Publications

Remote sensing techniques like NDVI (Normal Difference vegetative Index) when applied to phenological variations in aerial images, ascertained the seasonal rise and decline of photosynthetic activity in different seasons, resulting in different color tones of vegetation. The rise and fall of NDVI values decide the biological response, either the green up or brown down [1]. Vegetation in green up period appears with more vegetative vigor and during brown down period it has a dry appearance. This paper proposes a novel method that identifies vegetative patterns in satellite images and then alters vegetation color to simulate seasonal changes based on training …

Vegetation Identification Based On Satellite Imagery, Vamsi K.R. Mantena, Ramu Pedada, Srinivas Jakkula, Yuzhong Shen, Jiang Li, Hamid R. Arabnia (Ed.)

Electrical & Computer Engineering Faculty Publications

Automatic vegetation identification plays an important role in many applications including remote sensing and high performance flight simulations. This paper presents a method to automatically identify vegetation based upon satellite imagery. First, we utilize the ISODATA algorithm to cluster pixels in the images where the number of clusters is determined by the algorithm. We then apply morphological operations to the clustered images to smooth the boundaries between clusters and to fill holes inside clusters. After that, we compute six features for each cluster. These six features then go through a feature selection algorithm and three of them are determined to …