Engineering Commons^™

Simulation, Visualization And Self-Assessment Tools For Enhanced Engineering Education The Stiffness Matrix Method Module For Structural Analysis, Ahmed Ali Mohammed

Civil & Environmental Engineering Theses & Dissertations

Existing macromedia FLASH software which has extensive and exciting simulation and visualization capabilities is utilized to develop the "Stiffness Matrix Method" (SMM) module, which is one of the new topics ( offered for the first time in Spring 2007 semester) covered in a Structural Analysis I course, offered at the junior level at Old Dominion University. The developed software (under the FLASH environment), including tutorial lectures to explain all necessary theoretical backgrounds, formulas, step-by-step computerized procedures and numerical examples are presented in simple, user friendly, visualized, interactive fashion to enhance the student's learning capabilities. Through numerous graphical visualization and simulation …

Simulations Of Intracellular Calcium Release In Response To High-Intensity, Ultrashort Electric Pulse, Anh Nguyen

Electrical & Computer Engineering Theses & Dissertations

Calcium modulation is an important signaling process and could even contribute to cell apoptosis through ionic-induced perturbations in trans-membrane potential at the mitochondria. In this research, the numerical study constitutes a first step in quantitatively probing the time- and spatially-dependent modulation of calcium dynamics through the application of external electrical fields. The research uses both widely accepted deterministic continuum and discrete stochastic intracellular calcium models coupling with external electric field, with a focus on high-intensity ultrashort pulse electrical field.

For deterministic continuum intracellular calcium models with electric field assisted, numerical simulations for electrically induced, intra-cellular calcium-release from the endoplasmic reticulum …

Old Dominion University Space Systems Engineering Competency Development To Accommodate Orbital Flight Projects, Ersin Ancel

Mechanical & Aerospace Engineering Theses & Dissertations

Undergraduate engineering students in Old Dominion University's Batten College of Engineering and Technology have been engaged in the design, development, testing and flight of scientific sounding rocket payloads since 2004. During that time, two payloads have flown and a third payload has nearly achieved flight-ready status. The sophistication achieved by the flight-ready payload has resulted from the evolution of a rather rigorous space system design process that requires student involvement over periods of time that are much longer than those typically associated with an -undergraduate design course sequence.

In order to acquire the expected level of definition and reliability for …

Linear And Nonlinear Responses Of Isotropic Beams Under Concentrated Random Loads Unsynchronized In Time, Ravi Putrevu

Mechanical & Aerospace Engineering Theses & Dissertations

Large-amplitude random response of slender isotropic beams is studied using finite element analysis. The random load is assumed to be a stationary ergodic random Gaussian excitation with white noise characteristics. The loading is considered for three cases, namely synchronized, anti-synchronized, and unsynchronized in time. The linear response of beams is studied for the simply-supported and clamped-simply support conditions at the two ends. The non-linear response is, however, limited only to the simply-supported condition. There are no analytical solutions to the linear and non-linear responses of beams under concentrated random loads unsynchronized in time. The deflections due to unsynchronized loads are …

A Design Of Experiments Approach To Deck Flow Characterization On An Aircraft Carrier, Yugapriya Sivanesan Wing

Mechanical & Aerospace Engineering Theses & Dissertations

A wind tunnel model of an aircraft carrier was used to make air wake measurements. Particle image velocimetry measurements of turbulence intensity were made on a center plane intersecting the angled deck of the aircraft carrier. The factors of interest for the study were model pitch, yaw, island location, and island type. Two island types were used, a representative shape of current designs and an ideal streamlined airfoil shape. Each factor was studied at two levels in order to provide linear models using a Design of Experiments factorial design. From the data for each experimental combination, regression models for turbulence …

Virginia Junior Academy Of Science Awards, 2007

Virginia Journal of Science

Virginia Junior Academy of Science Awards Presented During the 66th Annual Meeting at James Madison University, Harrisonburg, Virginia, May 23-25, 2007.

Distributed Knowledge Discovery In Large Scale Peer-To-Peer Networks, Sachin Shetty

Computational Modeling & Simulation Engineering Theses & Dissertations

Explosive growth in the availability of various kinds of data in distributed locations has resulted in unprecedented opportunity to develop distributed knowledge discovery (DKD) techniques. DKD embraces the growing trend of merging computation with communication by performing distributed data analysis and modeling with minimal communication of data. Most of the current state-of-the-art DKD systems suffer from the lack of scalability, robustness and adaptability due to their dependence on a centralized model for building the knowledge discovery model. Peer-to-Peer networks offer a better scalable and fault-tolerant computing platform for building distributed knowledge discovery models than client-server based platforms. Algorithms and communication …

Numerical Modeling Of Gas Flows In Micronozzles, Orner San

Mechanical & Aerospace Engineering Theses & Dissertations

Since many microfluidic devices are operated in the continuum-transition regimes, the understanding of heat transfer behavior and fluid flow characteristics in this regime becomes important. The conventional Navier-Stokes model may become less accurate because of its first order constitutive relations. A direct simulation Monte Carlo method can be considered a more accurate numerical simulation for higher Knudsen numbers. However, the large number of required simulated molecules can easily make it prohibitively expensive in terms of computational time. Therefore, the Burnett equations, with their higher order constitutive relations for viscous stress and heat fluxes, are used in modeling flow characteristics in …

Dynamic Routing Structure For An Rti Taking An Evolutionary Approach Towards Optimization, Matthew Ryan Davis

Computational Modeling & Simulation Engineering Theses & Dissertations

The Runtime Infrastructure (RTI) is the common communication framework that High Level Architecture (HLA) simulations incorporate to exchange data. By abstracting the network communication layer from simulation, a common protocol for information exchange is achieved, allowing any RTI- based simulation to exchange data with any other. Such commonality can bring a limitation upon the network infrastructure, enforcing all federates to agree on the same communication policy. While this static network structure is not always the case, an optimal choice would be to adhere to the dynamic properties of a network. Static network configurations deny federates the ability to dynamically avoid …

Self-Assembly And Characterization Of Germanium Quantum Dots On Silicon By Pulsed Laser Deposition, Mohammed S. Hegazy

Electrical & Computer Engineering Theses & Dissertations

Self-assembled Ge quantum dots (QD) are grown on Si(100)-(2×1) by pulsed laser deposition (PLD). In situ reflection-high energy electron diffraction (RHEED) and post-deposition atomic force microscopy (AFM) are used to study the growth dynamics and morphology of the QDs. Several films of different thicknesses were grown at a substrate temperature of 400°C using a Q-switched Nd:YAG laser (λ = 1064 mu, 40 ns pulse width, 23 J/cm2 fluence, and 10 Hz repetition rate). At low film thicknesses, but clusters that are faceted by different planes, depending on their height, are observed after the completion of the wetting layer. With increasing …

Shaken Baby Syndrome: Retinal Hemorrhaging. A Biomechanical Approach To Understanding The Mechanism Of Causation, Steven Alex Hans

Mechanical & Aerospace Engineering Theses & Dissertations

Shaken Baby Syndrome (SBS) is a form of abuse where typically an infant, age six months or less, is held and shaken. There may or may not be direct impact associated with this action. Further, there is very little agreement on the actual mechanism of SBS. Clinical studies are limited in showing the exact mechanism of injury and only offer postulations and qualitative descriptions. SBS has received much attention in the media, has resulted in a great deal of litigation and can be the source of unfounded accusations. Therefore, it is necessary to try to quantify the forces that may …

Optimization Methods Of Laser Induced Breakdown Spectroscopy (Libs) And The Self-Absorption Problem, Olodia Ayed Taha Nassef

Electrical & Computer Engineering Theses & Dissertations

Laser Induced Breakdown Spectroscopy (LIBS) is a well-established technique for determining elemental composition. Compared to conventional methods, its ability to analyze solids, liquids, and gases with little or no sample preparation makes it more versatile and ideal for field, multi-element, and in-situ analysis. The method can be certified for analytical applications of interest in environmental monitoring and quality control processes. Previous work has demonstrated that several different experimental parameters (e.g. laser wavelength, repetition rate, interaction geometry, surface conditions) may affect the effective analytical possibilities of the method. Therefore, many studies have been devoted to optimize such parameters in a way …

Using Basic Computer Aided Drafting And Design Courses At The Freshman Level To Improve Technology Students Competitiveness In Obtaining Early Academic Career Internships, Anthony Dean, Mustafa Moustafa, Julie Moustafa

Engineering Technology Faculty Publications

Many students have the desire to have internships and part-time employment during their academic careers. Often students in their freshman and sophomore years in four year engineering and technology programs find it difficult to be competitive against more senior students for these positions. This paper discusses how students, in the Mechanical Engineering Technology (MET) program at ________________University, through taking CAD and Solid Modeling courses early in their academic careers are well suited to be competitive in obtaining internships and part time employment. This paper discusses the MET programs first two years’ curriculum and how it prepares the students to enter …

A General Engineering Technology Program In Motorsports Technology, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

Southside Virginia, in particular the cities of Danville, Martinsville and the surrounding area, is the home of Virginia International Raceway and a rapidly growing motorsports industry. There is a strong need for educational opportunities to support manufacturing and related industries in this region. In the early 2000’s Patrick Henry Community College in Martinsville established an associate of applied science degree in Motorsports Technology to help meet the need for technical support personnel. As the industry has grown it has become evident that engineers and technologists are needed at the baccalaureate and masters levels. Old Dominion University (ODU), located in Norfolk, …

Assessment Of Preliminary Design Approaches For Metallic Stiffened Cylindrical Shell Instability Problems, Vicki Owen Britt

Mechanical & Aerospace Engineering Theses & Dissertations

A preliminary design tool for metallic stiffened fuselage cylindrical panels subjected to longitudinal compression has been developed and validated by comparison to test results. Several methodologies for stiffened panel buckling and failure predictions were examined and evaluated. An appropriate level of analysis fidelity was determined for different failure modes and design details. Results from panel tests conducted to verify analytical methods used to design the Gulfstream V aircraft were presented. The panels were representative of four general skin/stringer configurations on the aircraft. Finite Element analyses and standard analytical methods were used to predict panel failure loads. The accuracy of the …

A Wavelet Based Complementary Approach For Image Enhancement, Ismail Kosum

Electrical & Computer Engineering Theses & Dissertations

Detail in an image means more meaningful information that is very important in many computer vision and pattern recognition applications. The object region visibility in an image plays an important role in obtaining accurate and desired information from the original image. In particular, image processing techniques developed for region segmentation and object classification have better results depending on the visibility in images. There are several enhancement techniques available which are capable of obtaining clear images with balanced lighting and contrast. In this thesis, a completely image dependent approach to enhance the luminance of images under extreme lighting conditions and a …

Simulation And Modeling Of Nerve Impulse Propagation And Its Blockage By External Electrical Stimulation, Nidhi Nahar

Electrical & Computer Engineering Theses & Dissertations

The electric nature of biological tissues permits the transmission of signals for information and for control and is, therefore, of vital importance for life. The latest scientific achievements and nanoscale probing techniques now allow scientists to research at the subcellular level by measuring the electric current flows through a single ion channel of the cell membrane with the patch-clamp method. With the latter approach, the effects of electrical stimulation can be quantified, understood, and applied to molecular biology and the development of medical diagnostic and therapeutic methods.

In this thesis, the Hodgkin-Huxley approach for unmyelinated fibers, coupled with a transmission …

Long-Range Target Classification In A Cluttered Environment Using Multi-Sensor Image Sequences, Cenk Yaman

Electrical & Computer Engineering Theses & Dissertations

Accurate identification of unknown contacts is crucial in military intelligence. Automated systems which quickly and accurately determine the identity of a contact could be a benefit in backing up electronic signal identification methods such as Identification Friend and Foe (IFF) systems. Radio Detection and Ranging (RADAR) images are often undesirable in military applications since they reveal the location of the imaging system. So we explore the use of visible and infrared images of which are generally more consistent than RADAR images and for which it is easy to compensate for environmental effects. Recent advances in visible and IR imaging technology …

An Exploratory Study Of Iso 9001:2000 Quality Management Systems Using The Iso/Iec 15504 Architecture, Paul Richard Shimp

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this paper is to provide an exploratory study on the implementation and issues regarding Quality Management Systems as defined by ISO 9001 :2000 using the architecture of ISO/IEC 15504. The recently published ISO/IEC 15504 series of standards provides a framework to assess processes and determine levels of capability. With the use of this framework, the study will focus on the assessment and identification of problem areas requiring focus for continual improvement within an ISO 9001 :2000 quality management system.

The structure of this paper is as follows: Section 1 provides a background discussion of ISO 9001 :2000. …

Bactericidal Effects Of Cold Plasma Technology On Geobacillus Stearothermophilus And Bacillus Cereus Microorganisms, Angela Dawn Morris

Dental Hygiene Theses & Dissertations

Non-equilibrium atmospheric pressure plasma, also known as cold plasma, is a state of matter that consists of a mix of neutral and charged particles. Plasma generates chemically reactive species and ultraviolet radiation making them useful in decontamination applications (Kong & Laroussi, 2003). Research regarding the inactivation of gram-positive bacteria, such as Bacillus atrophaeus, by cold plasma has been studied by Laroussi et al. (2003); however, there is limited research regarding the germicidal effectiveness of cold plasma on the microorganisms Geobacillus stearothermophilus and Bacillus cereus. The purpose of this study was to determine if cold plasma technology inactivates heat …

Development Of An Acoustic Measurement Capability For Automobile Testing In Open-Jet Wind Tunnels, Brianne Y. Williams

Mechanical & Aerospace Engineering Theses & Dissertations

Automobile aeroacoustics is still in its beginning stages. Understanding where control of the noise sources is addressed using mainly exploratory experimental methods and idealized models. The difficulty of reducing noise levels lies in the mechanisms that generate noise. Sound sources are generated from unsteady aerodynamics which arises from turbulent boundary layers and from regions of separated flow over the vehicle. These regions are subjected to unsteady pressures which are interpreted by the driver as undesirable noise. In order to reduce the noise around an automobile, the individual sources are best identified by . performing full-scale wind tunnel testing. This identification …

A Structured Systemic Framework For Software Development, Kevin Macgregor Adams

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based framework for the analysis of software development project performance. Software development project performance is measured at the project level; that is, cost, schedule, and product quality that affect the overall project. To date, most performance improvement efforts have been focused on individual processes within the overall software development system. Making improvements to sub-elements, processes, or sub-systems without regard for the overall project is a classic misbehavior entered into by practitioners who fail to use a holistic, systemic approach. Attempts to improve sub-system behavior are at odds with The …

Determining Underlying Characteristics Of Supplier Evaluation Model: A Quantitative Empirical Research, Zeynep Ozlem Ozgun

Engineering Management & Systems Engineering Theses & Dissertations

Rapid changes in the business environment, driven by competitive pressures and business complexity, present challenges that organizations cannot address without the support of their suppliers. In the past decades, performance evaluation factors such as quality, delivery, and price have been widely used by organizations to measure their suppliers' performance. Traditional supplier performance dimensions now considered to be only single dimensional, and not guarantee long term success of an organization. Use of internationally recognized standards and guidelines such as ISO 9000, MBNQA are recommended to be feasible for supplier Quality Management System evaluation in the literature. However, their effectiveness as a …

Aerodynamic And Acoustic Investigations Of An Advanced Over-The-Wing Nacelle Transport Aircraft Configuration, Geoffrey A. Hill

Mechanical & Aerospace Engineering Theses & Dissertations

The transonic aerodynamic and low-speed acoustic characteristics of an advanced, Over-the-Wing Nacelle (OWN), subsonic transport configuration are assessed. The cruise aerodynamics of the OWN were analyzed using both inviscid Euler and viscous Navier-Stokes CFD. Results of the assessments are compared to a similar configuration with a more traditional Under-the-Wing Nacelle (UWN) installation and a similar reference Wing-Body Qualitative observations and quantitative drag computations are made for the three configurations at a cruise Mach number of0.78, an approximate altitude of35,000-ft, and a C_L, of 0.44. It was found that the OWN's novel inboard wing channel design is effective in …

Performance Analysis Of Ieee 802.11b Devices In The Presence Of Interference Aware Scheduling-Adaptive Frequency Hopping Enabled Bluetooth Devices, Deepthi Gopalpet

Electrical & Computer Engineering Theses & Dissertations

Wireless Local Area networks (WLAN) and Wireless Personal Area Networks (WPAN) provide complimentary services using the same unlicensed radio frequency band of operation. The 802.11b WLAN operates in the 2.4 GHz band and uses a Direct Sequence Spread Spectrum technique. It is designed to cover large areas ranging up to 100 meters in diameter, which may connect hundreds of computers. Bluetooth (BT) WPAN also operates in the same frequency band as the IEEE 802.lib and it uses a Frequency Hopping Spread Spectrum technique. BT is primarily used for communications between notebooks, palm units and other personal computing devices within relatively …

What Should Be In A Human Behavior Representation Federation Object Model For High Level Architecture, Gurkan Haznedaroglu

Electrical & Computer Engineering Theses & Dissertations

Modeling and Simulation (M&S) can assist in evaluating scenarios and enhancing the performance of operational systems. Fully integrated use of MBS can enable the evaluation of the effectiveness of proposed equipment or software in realistic simulated environments and can provide an assessment of the impacts of specific equipment or capabilities on battle outcomes. Every level, from strategic planners, technology experts, operations research analysts, weapons systems designers and users, testers, maintainers, and cost analysts, has to be interactively involved to maximize the benefits of this approach. Human behavior is a very important part of the M&S process. Especially in constructive simulations, …

Simulations Of Intracellular Calcium Release Dynamics In Response To A High-Intensity, Ultrashort Electric Pulse, R. P. Joshi, A. Nguyen, V. Sridhara, Q. Hu, R. Nuccitelli, Stephen J. Beebe, J. Kolb, Karl H. Schoenbach

Bioelectrics Publications

Numerical simulations for electrically induced, intracellular calcium release from the endoplasmic reticulum are reported. A two-step model is used for self-consistency. Distributed electrical circuit representation coupled with the Smoluchowski equation yields the ER membrane nanoporation for calcium outflow based on a numerical simulation. This is combined with the continuum Li-Rinzel model and drift diffusion for calcium dynamics. Our results are shown to be in agreement with reported calcium release data. A modest increase (rough doubling) of the cellular calcium is predicted in the absence of extra-cellular calcium. In particular, the applied field of 15 kV/cm with 60 ns pulse duration …

A Risk- And Fuzzy Set-Based Methodology For Advanced Concept Technology Demonstration Military Utility Assessment Design, Thomas James Meyers

Engineering Management & Systems Engineering Theses & Dissertations

The U.S. Department of Defense Advanced Concept Technology Demonstration (ACTD) and derivative, rapid acquisition programs offer timely solutions to critical military needs by assessing the utility of technologies mature enough to be fielded without application of traditional, defense system development processes. Military utility assessments (MUA) are ACTDs' most critical features, but the lack of a standard for identifying assessment criteria tailored to specific demonstrations risks poorly informed acquisition decisions and the military operations those decisions are intended to support.

The purpose of this research was to develop and deploy a methodology for identifying measures of effectiveness integral to advanced concept …

Micro Synthetic Jets As Effective Actuator, Mehti Koklu

Mechanical & Aerospace Engineering Theses & Dissertations

Synthetic jets have previously been studied as actuators for external macroflow control and recently been proposed for internal microflow applications. Despite the wide variety of the potential applications of synthetic jet actuators, the majority of the studies have been done at macro scales. Furthermore, there has not been any design methodology that addresses the effectiveness of the micro synthetic jet actuators. Bearing these needs in mind, a micro synthetic jet configuration is considered in a microscale environment where Kn number is less than 0.1 and more than 0.001. Flowfields are simulated by solving the compressible Navier-Stokes equations. The wall boundary …

Uncertainty Assessment In High-Risk Environments Using Probability, Evidence Theory And Expert Judgment Elicitation, Stella Barberis Bondi

Engineering Management & Systems Engineering Theses & Dissertations

The level of uncertainty in advanced system design is assessed by comparing the results of expert judgment elicitation to probability and evidence theory. This research shows how one type of monotone measure, namely Dempster-Shafer Theory of Evidence can expand the framework of uncertainty to provide decision makers a more robust solution space. The issues imbedded in this research are focused on how the relevant predictive uncertainty produced by similar action is measured.

This methodology uses the established approach from traditional probability theory and Dempster-Shafer evidence theory to combine two classes of uncertainty, aleatory and epistemic. Probability theory provides the mathematical …