Mechanical Engineering Commons^™

Height Dependent Laser Metal Deposition Process Modeling, Patrick M. Sammons

Masters Theses

"Laser Metal Deposition (LMD) is used to construct functional parts in a layer-by-layer fashion. The heat transfer from the melt region to the solid region plays a critical role in the resulting material properties and part geometry. The heat transfer dynamics can change significantly as the layers increase, depending on the geometry of the sub layers. However, this effect is unaccounted for in previous analytical models, which are only valid for a single layer. This thesis develops a layer dependent model of the LMD process for the purpose of designing advanced layer-to-layer controllers. A lumped-parameter model of the melt pool …

Pulmonary Fluid Dynamics And Aerosol Drug Delivery In The Upper Tracheobronchial Airways Under Mechanical Ventilation Conditions, Timothy Andrew Van Rhein

Masters Theses

"The effects of mechanical ventilation conditions on fluid flow and particle deposition were studied in a computer model of the human airways. The frequency with which aerosolized drugs are delivered to mechanically ventilated patients demonstrates the importance of understanding the effects that ventilation parameters have on particle deposition in the human airways. Past studies that modeled particle deposition in silico frequently used an idealized geometry with steady inlet conditions. With recent advancements in computational power and medical imaging capabilities, studies have begun to use more realistic geometries or unsteady inlet conditions that model normal breathing. This study focuses specifically on …

A Three-Dimensional Transient Simulation Of An Electrochemical Magnetohydrodynamics Cell With Micro And Millielectrode: A Unified Reconciliation Of Theory And Experiment, Cajon Gonzales

Masters Theses

"Even though electrochemically induced magnetohydrodynamic (MHD) convection is a straightforward inexpensive method for moving fluids in confined spaces as for example during electrodeposition, stripping voltammetry, or in microfluidics, efficient quantitative models only recently have begun to appear. This is traced to complex mathematics that have prevented development of analytical expressions, e.g., for mass-transfer limited currents in analogy to the well-known Levich equation for the rotating electrode. Thus, related literature expressions remain mainly phenomenological concerning particular cell geometries or applications. Here, using such reports as points of departure, we validate a computationally rigorous description of the magnetoelectrochemical problem and define the …

Heat Transfer Enhancement In A Straight Channel Via A Rotationally Oscillating Adiabatic Cylinder, Ali Beskok, Mehrdad Raisee, Bayram Celik, Bedri Yagiz, Mohsen Cheraghi

Mechanical & Aerospace Engineering Faculty Publications

Heat convection from the uniformly heated walls of a straight channel in presence of a rotationally oscillating cylinder (ROC) is simulated at Re = 100. Heat transfer enhancement due to vortex shedding from the ROC is investigated. Systematic studies are performed to explore the rotation angle and frequency influences on heat transfer by varying the latter in range of the lock-in regime and the former from 0 to 2 π/3. All simulation results are based on the numerical solutions of two-dimensional, unsteady, incompressible Navier-Stokes and energy equations using an h/p type finite element algorithm. Considering time periodicity of the resulting …

Propuesta De Implementación De Energía Solar Fotovoltaica En Instalaciones Pesqueras En Venezuela, Juan Zambrano, Aleyani Zambrano, Buitrago Franklin, Nelson Fumo

Mechanical Engineering Faculty Publications and Presentations

Los sistemas de obtención de energía por medios renovables han venido creciendo de manera interesante en los últimos años debido a los altos precios de la energía y a la limitada disponibilidad del recurso, en el caso de los sistemas de energía solar fotovoltaica (FV), a nivel mundial se ha demostrado gran potencial en proyectos de electrificación rural para aplicaciones domésticas y labores agropecuarias. Venezuela por su posición geográfica privilegiada, cuenta con un gran potencial energético solar, se tiene garantizado un 85% de la incidencia solar estable durante todo el día, incluso en períodos de verano se alcanzan hasta 8 …

A Bench Top Study Of The Optimization Of Lvad Cannula Implantation To Reduce Risk Of Cerebral Embolism, William D. Clark

Electronic Theses and Dissertations

Physical bench top experiments are performed to validate and complement ongoing computational fluid dynamics (CFD) analyses of ventricular assist device (VAD) circulation. VADs are used in patients whose hearts do not function to their maximum potential due advanced stages of heart disease and, consequently, are unable to adequately supply blood to the systemic circulation. VADs are commonly utilized as a bridge-to-transplantation, meaning that they are implanted in patients while waiting for a heart transplant. In such cases of long term utilization of VADs, it has been reported in the literatures that thrombo-embolic cerebral events occur in 14-47% of patients over …

Development Of Detailed Computational Flow Model Of High End Server And Validation Using Experimental Methods, Vijayalayan Pandiyan

Mechanical and Aerospace Engineering Theses - Archive

The continued development of the microprocessor has led to significant increase in high frequency interconnects and power dissipation. High power devices are pushing the limits of air cooling in data center environments. Data center power consumption continues to grow at a rapid pace. In light of this increasing trend in power consumption, computer systems researchers, application designers, power and cooling engineers, and governmental bodies have all launched research efforts to improve data center energy efficiency [1]. Rack servers tend to be the main perpetrators of wasting energy and represent the largest portion of the IT energy load in a typical …

Experimental/Computational Analysis Of Active Cooling Of Stacked Device Using Multidimensional Configured Thermoelectric Modules, Vaidehi Bharat Patel

Mechanical and Aerospace Engineering Theses - Archive

Stacked devices are currently used widely because of their smaller footprint and corresponding ability to accommodate heterogeneous devices such as memory and logic and enable a silicon efficiency greater than 100%. This configuration will results in thermal management challenges due to the torturous heat dissipation path. In addition, the non-uniformity in chip power distribution results in an increased spreading resistance as well as temperature gradient at the device level that can degrade performance and reliability. In this study the Thermoelectric Modules were configured in a multidimensional form surrounding a three dimensional cold core. The corresponding Computational Fluid Dynamics model is …

Large Scale Finite Element Analysis Using Gpu Parallel Computing, Ashkan Akbariyeh

Mechanical and Aerospace Engineering Theses - Archive

In the past years, graphic processing units have become a new abundant parallelcomputing resource on personal computers. In this work parallel computation ofa typical case in nite element analysis for solids has been practiced. The solutionof 3-D linear elastic static problems with 3 degree of freedom is fully implementedutilizing the current GPU technology. Discretization of the problem has been donefor two cases of: Tetrahedral and Hexahedral elements. Acceleration of the solutionhas been realized using SIMT parallel algorithms. Sparse matrix storage formats aswell as matrix-vector operations are investigated for optimum hardware utilization.preconditioned conjugate gradient method has been fully implemented on the …

Spotlight On Usc: Mechanical Engineering, Allison Marsh

Section 3: Imaging the Fast Moving

No abstract provided.

Hydraulic Test Bench Circuit Construction, Testing, And Analysis, Shane Michelson, Mitch Mueller, Brett Schurman

The Journal of Undergraduate Research

Hydraulic power control systems are a common and important part of mechanical and agricultural systems. In hydraulic power system design, power, pressure, flow rates, and mechanism of circuitry are all important factors when analyzing any hydraulic system. Pumps, electric motors, reservoirs, working fluid properties, hydraulic circuitry, and a large variety of valves make up a functional hydraulic system. Applications for hydraulic systems vary widely from automotive, agricultural, mechanical etc. It is the engineers’ job to design a hydraulic system that will be functional, efficient, and safe.

Multiwall Carbon Nanotube Arrays For Thermal Interface Enhancement, Darrell Keith Etheredge

Theses and Dissertations--Mechanical and Aerospace Engineering

High performance/small package electronics create difficult thermal issues for integrated circuits. Challenges exist at material interfaces due to interfacial contact resistances. Multiwall carbon nanotube (MWCNT) arrays are considered to be excellent candidates for use as thermal interface materials (TIMs) due to outstanding thermal/mechanical properties. In this work, MWCNT array TIMs are analyzed in aluminum and carbon fiber composites via flash diffusivity analysis. The effect of TIM thickness, areal/bulk density, surface cleanliness, and volumetric packing fraction; along with the effect of substrate finish and interfacial contact pressure on thermal performance are analyzed. Trends show the best TIMs possess low thickness, high …

The Development Of A Predictive Probability Model For Effective Continuous Learning And Improvement, Michael Abbot Maginnis

Theses and Dissertations--Mechanical and Aerospace Engineering

It is important for organizations to understand the factors responsible for establishing sustainable continuous improvement (CI) capabilities. This study uses learning curves as the basis to examine learning obtained by team members doing work with and without the application of fundamental aspects of the Toyota Production System. The results are used to develop an effective model to guide organizational activities towards achieving the ability to continuous improve in a sustainable fashion.

This research examines the effect of standardization and waste elimination activities supported by systematic problem solving on team member learning at the work interface and system performance. The results …

Simulation And Experimental Validation Of Airborne And Structure-Borne Noise Transmission In Hvac Plenums, Srinivasan Ramalingam

Theses and Dissertations--Mechanical and Aerospace Engineering

This research demonstrates the usage of numerical acoustics to model sound and vibrational energy propagation in HVAC ducts and plenums. Noise and vibration in HVAC systems propagates along three primary paths that can be classified as airborne direct, airborne indirect and structure-borne. The airborne direct path was simulated using acoustic FEM with special boundary conditions to handle the diffuse acoustic field loading and the baffled termination. The insertion loss for a number of different plenum geometries was compared to published measurement results. Results were in good agreement both below and above the cutoff frequency. Additionally, the airborne indirect path, often …

Temperature And Strain Controlled Optimization Of Stabilization Of Polyacrylonitrile Precursor Fibers, Mark Parr Taylor

Theses and Dissertations--Mechanical and Aerospace Engineering

Carbon fiber is one of the leading materials for high strength and modulus, and light weight applications. Improvements in carbon fiber properties are directly dependent on all aspects of manufacture, especially the process of stabilization. Therefore, it is the goal of this thesis to study the effects of the temperature and strain profile of the stabilization process, and the resulting carbon fiber tensile properties. In addition, the precursor fibers used were spun under two different draw ratios, to study the effects of the spinning parameters. Results indicated through DMA studies that completeness of stabilization reactions can be gauged by the …

Cryogenic Machining And Burnishing Of Az31b Magnesium Alloy For Enhanced Surface Integrity And Functional Performance, Zhengwen Pu

Theses and Dissertations--Mechanical and Aerospace Engineering

Surface integrity of manufactured components has a critical impact on their functional performance. Magnesium alloys are lightweight materials used in the transportation industry and are also emerging as a potential material for biodegradable medical implants. However, the unsatisfactory corrosion performance of Mg alloys limits their application to a great extent. Surface integrity factors, such as grain size, crystallographic orientation and residual stress, have been proved to remarkably influence the functional performance of magnesium alloys, including corrosion resistance, wear resistance and fatigue life.

In this dissertation, the influence of machining conditions, including dry and cryogenic cooling (liquid nitrogen was sprayed to …

Is Densified Biomass Fuel From Agro-Forestry Waste A Sustainable Energy Option?, William A. Linnig Iii

Theses and Dissertations--Mechanical and Aerospace Engineering

Raw biomass material is bulky, high in void fraction, and very low in transportation efficiency. Furthermore, biomass dissipates quickly in harsh environments of high heat furnaces because of its relatively low calorific value (BTU/lb) and has grinding or size degradation properties highly dissimilar from commonly-used fossil fuels like coal. Therefore, the development of transformational technologies are necessary to convert raw biomass into high-value and useful products of high hardness and calorific value without requiring excessive process energy.

This thesis investigates the sustainability of densified biomass fuels. In addition, a procedure that converts raw biomass from agro/forest industry waste into a …

Specified Motion And Feedback Control Of Engineering Structures With Distributed Sensors And Actuators, Amirhossien Ghasemi

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation addresses the control of flexible structures using distributed sensors and actuators. The objective to determine the required distributed actuation inputs such that the desired output is obtained. Two interrelated facets of this problem are considered. First, we develop a dynamic-inversion solution method for determining the distributed actuation inputs, as a function of time, that yield a specified motion. The solution is shown to be useful for intelligent structure design, in particular, for sizing actuators and choosing their placement. Secondly, we develop a new feedback control method, which is based on dynamic inversion. In particular, filtered dynamic inversion combines …

Simulation Of Whistle Noise Using Computational Fluid Dynamics And Acoustic Finite Element Simulation, Jiawei Liu

Theses and Dissertations--Mechanical and Aerospace Engineering

The prediction of sound generated from fluid flow has always been a difficult subject due to the nonlinearities in the governing equations. However, flow noise can now be simulated with the help of modern computation techniques and super computers. The research presented in this thesis uses the computational fluid dynamics (CFD) and the acoustic finite element method (FEM) in order to simulate the whistle noise caused by vortex shedding. The acoustic results were compared to both analytical solutions and experimental results to better understand the effects of turbulence models, fluid compressibility, and wall boundary meshes on the acoustic frequency response. …

Cryogenic Burnishing Of Co-Cr-Mo Biomedical Alloy For Enhanced Surface Integrity And Improved Wear Performance, Shu Yang

Theses and Dissertations--Mechanical and Aerospace Engineering

The functional performance of joint implants is largely determined by the surface layer properties in contact. Wear/debris-induced osteolysis and aseptic loosening has been identified as the major cause of failure of metal-on-metal joint implants. A crucial requirement for the long-term stability of the artificial joint is to minimize the release of debris particles.

Severe plastic deformation (SPD) processes have been used to modify the surface integrity properties by generating ultrafine, or even nano-sized grains and grain size gradients in the surface region of many materials. These fine grained materials often exhibit enhanced surface integrity properties and improved functional performance (wear …