Materials Science and Engineering Commons^™

Particle Boards Created From Modified Lignin, Robbie Kazen

GS4 Student Scholars Symposium

My name is Robert Kazen, a student directed under Dr. Rafael Quirino currently working on the Lignin Modification project. The research project involves the isolation of lignin from black liquor, a byproduct produced by the paper pulping industry. Isolated chemically the lignin was then modified using two methods, (1) acrylation acid and (2) transesterification with tung oil modifications. The black liquor obtained was sent by the Arizona Chemical and Herty Advanced Materials Development Center. Currently the tung oil modification gives the most valuable product physically and its products will be mainly used for particle board creation and testing. The tung …

Creation And Implementation Of An Underwater-Capable Vr Headset Through The Use Of Additive Manufacturing, Matthew D. Meyers, Nathan Sonnenfeld

Human Factors and Applied Psychology Student Conference

No abstract provided.

A Numerical Approach To Investigate The Influence Of Deformable Blockages On Blood Flow In An Elastic Vessel, Tai-Hsien Wu

Research and Creative Activities Poster Day

In this work, we presented a new numerical approach to study the deformation of blockages and fluid properties in an elastic blood vessel. In computational hemodynamics, only few of the current numerical models considered the elasticity of vessels, and those models were difficult to extend to other topics like the deformation of blockages in elastic blood vessels. In addition, the approach that we employed is especially effective on visualization. A validation for the present method is carried out by comparing the simulation results with a theoretical prediction of the deformation of the pulmonary blood vessel in a steady flow. Subsequently, …

Optimizing Chemical & Rheological Properties Of Rejuvenated Bitumen, Dominic Nguyen, Hamzeh Haghshenas Fatmehsari, Santosh Kommidi, Yong-Rak Kim

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Bitumen has long been a material used in the construction of roadways, yet new pavement only consists of low fractions of recycled materials due to poor compatibility of aged bitumen and new materials. Thus, rejuvenators, chemical additives, have been used in an attempt to re-balance the chemical composition and restore the physical properties of aged bitumen back to its virgin state. A fundamental understanding of how one particular rejuvenator, soybean oil, revitalizes bitumen was investigated using a multi-scale approach.

Fourier-transform infrared spectroscopy (FTIR) was used to determine the changes in chemical properties of pure and rejuvenated virgin and aged samples. …

Palladium Nanoparticles On Zno-Passivated Carbon For Enhanced Performance In Li-O2 Batteries, Mar Piernavieja-Hermida

Research Horizons Day Posters

No abstract provided.

Al/Ti Nanostructured Multilayers: From Mechanical, Tribological, To Corrosion Properties, Sina Izadi

USF Tampa Graduate Theses and Dissertations

Nanostructured metallic multilayers (NMMs) are well-known for their high strength in smaller bilayer thicknesses. Six Al/Ti (NMM) with different individual layer thickness were tested for their mechanical hardness using a nanoindentation tool. Individual layer thicknesses were chosen carefully to cover the whole confined layer slip (CLS) model. Nano-hardness had a reverse relation with the square root of individual layer thickness and reached a steady state at ~ 5 nm bilayer thickness. Decreasing the layer bilayer thickness from ~ 104 nm to ~ 5 nm, improved the mechanical hardness up to ~ 101%. Residual stresses were measured using grazing incident X-ray …

Molecular Combing Of Dna Nanofibers And Comparison To Electrospinning, Tanner L. Buresh

UCARE: Research Products

The goal of these experiments was to create DNA nanofibers through the method of molecular combing (MC) and then compare the MC fibers to fibers created with electrospinning (ES). The experiment was designed and initial samples were created. After confirming that the method would succeed in creating DNA fibers, several parametric studies were performed in order to optimize the experiment and create the most uniform fibers possible. The parametric studies were done on the following variables: substrate material, pH level of DNA solution, and DNA solution concentration. After completion of all experiments, it was determined that although fibers could be …

Management Of A Sever Degloving Foot Injury: A Rare Presentation Of Food Injury In Emergency Department, Ugur Lok, Hasan Buyukaslan, Umut Gulacti, Fatih Dogan, Irfan Aydin

Materials Science and Engineering Faculty Research & Creative Works

Occupational crash injuries of the foot present a significant reconstructive challenge due to the superficial location of structures such as tendon, joint and neurovascular network essential for proper acceptance of weight bearing and shear forces associated with bipedal gait. We discussed here a rare case in which an extensive degloving injury of the foot and combined with knee traumatic dislocation and proximal fibula tip fracture that underwent amputation. The authors suggested that none of treatment modalities of degloving are entirely satisfactory, so that each case must be considered independently with cons and pros

Assessing The Performance Of A Soy Methyl Ester -Polystyrene Topical Treatment To Extend The Service Life Of Concrete Structures, D'Shawn G. Thomas

Open Access Theses

Experimental results show that soy methyl ester (SME), a derivative of soy bean oil, along with the incorporation of polystyrene (PS) is a non-toxic, biodegradable and renewable material that can be used effectively as a topical concrete surface treatment. While, concrete sealants and topical surface treatments can be used to extend to durability of concrete structures, it is difficult to predict the durability of concrete structures sealed with a sealant or topical surface treatment. This is due to a lack of necessary model inputs that can be used to address the durability of concrete structures treated with these materials. In …

Optimization Of Process Parameters In Micro Electrical Discharge Machining (Edm) Of Ti-6al-4v Alloy, Farshid Alavi

Masters Theses & Specialist Projects

Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants.

The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in …

Breakdown Voltage Performances Of Aluminum And Copper Conductor Wire Under Compression Stresses, Richard Donald Suchanek Iii

Masters Theses & Specialist Projects

In the global, competitive market of energy transformation, increased operational expenses and depletion of raw materials have resulted in companies pursuing alternate materials to reduce consumer costs. In electrical applications, energy is transformed using materials with high electrical conductive properties. The conductive material used to transmit a signal is called conductor wire and is comprised of any material that has the ability to move charged particles from one point to another without propagation or delay. The conductor wire in many applications is encapsulated in epoxy resin called enamel. The enamel is the insulation system that provides necessary dielectric clearances to …

Clay Nanotube Composites For Antibacterial Nanostructured Coatings, Christen J. Boyer

Doctoral Dissertations

A surging demand for the development of new antimicrobial nanomaterials exists due to the frequency of medical device-associated infections and the transfer of pathogens from highly touched objects. Naturally occurring halloysite clay nanotubes (HNTs) have shown to be ideal particles for polymer reinforcement, time-release drug delivery, nano-reactor synthesis, and as substrate material for nanostructured coatings.

This research demonstrates the feasibility of a novel method for coating HNTs with metals for antibacterial applications. The first ever ability to coat HNTs through electrolysis was developed for customizable and multi-functional antibacterial nanoparticle platforms. HNTs were investigated as substrate for the deposition of copper …

Vacuum Brazing Of Diamond To Tungsten Carbide, Zhiyong Yin

Graduate Theses & Non-Theses

Diamond tools are increasingly gaining importance as cutting and drilling materials for a wide variety of industrial applications. Polycrystalline diamond (PCD) is the main ultrahard material commercially used in the oil and gas drilling industry. In this study, a reactive brazing process was developed to join polycrystalline diamond (PCD) to WC-13 wt% Co, to form the cutter for fixed-cutter drill bit applications.

Most nonmetals including polycrystalline diamond are not wet by and cannot easily be joined with conventional brazing alloys due to their chemical stability. The experimental approach was first to analyze the effect of adding an active metal (Ti, …

Chlorination And Selective Vaporization Of Rare Earth Elements, Daniel Gaede

Graduate Theses & Non-Theses

No abstract provided.

Electrochemical Characterization Of Xanthate Chemisorption On Copper And Enargite, Tyler Broden

Graduate Theses & Non-Theses

The electrochemical reactions of copper and enargite (Cu₃AsS₄) were studied in the absence and presence of xanthate by cyclic voltammetry (C.V.) using electrodes fashioned from pure copper wire obtained from the Metallurgical and Materials Engineering Department, and an enargite mineral sample obtained from the Orphan Girl mine in Butte, MT. Voltammograms were produced in buffer solutions of pH values ranging from 7-12. Electrochemical reactions were discerned by comparing E_H-pH diagrams calculated from thermodynamics using StabCal, a computer program developed by Dr. Huang at Montana Tech. The chemisorption of xanthate on the surface of copper …

Thermal Properties, Crystallinity, And Oxygen Permeability Of Na-Montmorillonite Reinforced Plasticized Poly(Lactic Acid) Film, Kurniawan Yuniarto, Yohanes Aris Purwanto, Setyo Purwanto, Bruce A. Welt, Hadi Karia Purwadaria, Titi Candra Sunarti

Makara Journal of Technology

Introducing unmodified organically clay/Na-montmorillonite (Na-MMT) was applied into plasticized poly(lactic acid) PLA to produce film composites by direct casting. Film composite structure, the crystallinity degree and form, and thermal properties were carried out using X-ray diffraction and differential scanning calorimetry. The effect of Na- MMT to the tortuous path and the crystallinity degree in the plasticized film composites were calculated in oxygen barrier properties. Chromatogram film composites resulted in an intercalated structure that showed peak diffraction angle shift at about 0.2o. Then, a peak diffraction pattern was indicated in α-form crystal structure. Plasticized PLA has a crystallinity degree at 34%, …

Residual Strength Analysisof Asymmetrically Damaged Ship Hull Girderusing Beam Finite Element Method, Muhammad Zubair Muis Alie

Makara Journal of Technology

The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method is used for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4) and a three-cargo-hold model of a single-side Panamax Bulk Carrier in hogging and sagging conditions. The Smith’s method is adopted and implemented into Beam Finite Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the cross section and three-cargo-hold model. As …

Discrete Power Control In Heterogenous Networks, Yuanyuan Wang, Wibowo Hardjawana, Branka Vucetic

Makara Journal of Technology

In heterogeneous networks (HetNets) where femtocell base stations (FBSs) are deployed within the radio coverage of macrocell base stations (MBSs) to increase network capacity, co-channel interference limits overall system performance with universal frequency reuse. This paper investigates new distributed downlink discrete power control scheme for FBSs in HetNets with FBSs cooperation. The objective of the proposed power control scheme is to maximize the number of simultaneous FBSs transmissions in a single transmission wireless channel where each FBS is allowed to transmit only if the signal-to-interference-noise ratio (SINR) requirements for both FBSs and MBS users are satisfied. We apply a stochastic …

Multi-Project Scheduling Cost Optimization In A Machine Manufacturer Engineer-To-Order, Farizal Farizal, Amar Rachman, Tifani Tandean, Sumarsono Sudarto, Katsuhiko Takahashi

Makara Journal of Technology

This paper discusses the utilization of mixed integer linear programming (MILP) model to optimize cost for multiproject scheduling in a machine maker company. The objective is to minimize total project’s penalty cost and labor cost. The model formulated shows how to achieve the objective i.e. whether to use outsourcing or overtime to finish all projects. The model of multi-project scheduling was solved by Branch & Bound algorithm coded in Lingo 14.0 software. The case study shows that if a company wants to minimize lateness, it should use overtime instead of outsourcing, which minimize total lateness of projects by 144 days …

Analysis Of Arm Movement Prediction By Using The Electroencephalography Signal, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko, Lidwina Ayu Andarini, Achmad Furqon Idrus

Makara Journal of Technology

Various technological approaches have been developed in order to help those people who are unfortunate enough to be afflicted with different types of paralysis which limit them in performing their daily life activities independently. One of the proposed technologies is the Brain-Computer Interface (BCI). The BCI system uses electroencephalography (EEG) which is generated by the subject’s mental activity as input, and converts it into commands. Some previous experiments have shown the capability of the BCI system to predict the movement intention before the actual movement is onset. Thus research has predicted the movement by discriminating between data in the “rest” …