Materials Science and Engineering Commons^™

More Investigations In Capillary Fluidics Using A Drop Tower, Andrew Paul Wollman, Mark M. Weislogel, Brentley M. Wiles, Donald Pettit, Trevor Snyder

Mechanical and Materials Engineering Faculty Publications and Presentations

A variety of contemplative demonstrations concerning intermediate-to-large length scale capillary fluidic phenomena were made possible by the brief weightless environment of a drop tower (Wollman and Weislogel in Exp Fluids 54(4):1, 2013). In that work, capillarity-driven flows leading to unique spontaneous droplet ejections, bubble ingestions, and multiphase flows were introduced and discussed. Such efforts are continued herein. The spontaneous droplet ejection phenomena (auto-ejection) is reviewed and demonstrated on earth as well as aboard the International Space Station. This technique is then applied to novel low-g droplet combustion where soot tube structures are created in the wakes of burning drops. …

X-Ray Absorption Spectroscopy Study Of The Effect Of Rh Doping In Sr2Iro4, C. H. Sohn, Deok-Yong Cho, C. -T. Kuo, L. J. Sandilands, Tongfei Qi, Gang Cao, T. W. Noh

Center for Advanced Materials Faculty Publications

We investigate the effect of Rh doping in Sr₂IrO₄ using X-ray absorption spectroscopy (XAS). We observed appearance of new electron-addition states with increasing Rh concentration (x in Sr₂Ir_1−xRh_xO₄) in accordance with the concept of hole doping. The intensity of the hole-induced state is however weak, suggesting weakness of charge transfer (CT) effect and Mott insulating ground states. Also, Ir J_eff = 1/2 upper Hubbard band shifts to lower energy as x increases up to x = 0.23. Combined with optical spectroscopy, these results suggest a hybridisation-related mechanism, in …

Spin-Gapless Semiconductivity And Half Metallicity In Heusler Alloys, Bradley A. Staten, Pavel V. Lukashev

Research in the Capitol

In recent years, ever increasing interest in spin-based electronics (spintronics) has resulted in the search for a new class of materials that can provide a high degree of transport spin polarization. An ideal candidate would act like insulator for one spin channel and a conductor or semiconductor for the opposite spin channel (e.g. half metals (HM), spin gapless semiconductors (SGS)). In this work, we present results of our computational and theoretical study (Staten, et al., J. Appl. Phys. 117, 17D115 (2015)) of Heusler compounds with potential commercial applications in the field of spintronics. We show that naturally these materials are …

Closing A Synthetic Carbon Cycle: Carbon Dioxide Conversion To Carbon Monoxide For Liquid Fuels Synthesis, Yolanda Andreina Daza

USF Tampa Graduate Theses and Dissertations

CO₂ global emissions exceed 30 Giga tonnes (Gt) per year, and the high atmospheric concentrations are detrimental to the environment. In spite of efforts to decrease emissions by sequestration (carbon capture and storage) and repurposing (use in fine chemicals synthesis and oil extraction), more than 98% of CO₂ generated is released to the atmosphere. With emissions expected to increase, transforming CO₂ to chemicals of high demand could be an alternative to decrease its atmospheric concentration. Transportation fuels represent 26% of the global energy consumption, making it an ideal end product that could match the scale of CO …

Radiation Effects On An Active Ytterbium-Doped Fiber Laser, Adam C. Poulin

Theses and Dissertations

This is the first published research focused on the impact of gamma and mixed gamma/neutron radiation on an actively lasing ytterbium-doped fiber laser. While the gain medium of the ytterbium-doped fiber laser was irradiated, the power was measured in-situ and the spectrum was recorded intermittently. Two radiation sources were used, a ⁶⁰Co cell and a reactor. Three irradiation experiments were conducted per radiation source; pristine fibers were used for the first two experiments, and fibers from the second experiment were re-irradiated for the third experiment. The results indicate that as the total dose increased linearly with time, the laser …

Radiation Effects In Thin Film Hexagonal Boron Nitride, Nathaniel M. Kaminski

Theses and Dissertations

The radiation response of 2 nm and 12 nm hexagonal boron nitride (hBN) thin film insulators was studied using metal insulator semiconductor (MIS) devices. Current-voltage, capacitance-voltage, and impedance spectroscopy measurements were compared to quantify changes in hBN resistance due to radiation damage. MIS devices exposed to a gamma total dose deposition of 3.1 Mrad(Si) from a Co- 60 source exhibited a small increase in hBN resistance and no observable C-V shift associated with charge trapping. MIS devices irradiated with 4.5 MeV silicon ions showed no significant resistivity decrease to a threshold fluence of 1 ×10¹² for the 2 nm …

Hydrogen Effects On X80 Steel Mechanical Properties Measured By Tensile And Impact Testing, Xuan Li

USF Tampa Graduate Theses and Dissertations

The effect of hydrogen charging current density and tensile strain rate on the mechanical properties of X80 pipeline steel were investigated by slow strain rate test (SSRT), Charpy impact test, and scanning electron microscopy (SEM) in this thesis. The results show that both the ultimate tensile strength and elongation to failure of X80 steel were deteriorated significantly after charging with hydrogen. With a strain rate of 5 x 10^-5 s^-1, the relative tensile strength and plasticity loss of X80 steel had no significant change within the range of assumed hydrogen partial pressures at room temperature. At room …

Characterization Of 2d Jammed Granular Memristive Copper Arrays, Len L. Kedrow

Theses and Dissertations

A novel sensor made of jammed granular memristive copper spheres was explored in an effort to develop a protection technology that could be used in non-proliferation treaty monitoring. The micro-copper spheres were annealed for various times at a constant temperature. SEM, EDS, and XPS were used to characterize the growth of the oxide coating. Electrical characterization of the device was done by confining the granular copper spheres to a two-dimensional plane using a unique test fixture capable of measuring I-V curves at the boundary of the circuit board using tungsten pillar electrodes. Electroforming of the copper spheres produced soft dielectric …

Creep Of Hi-Nicalon™ S Ceramic Fiber Tows At 700°C In Air And In Silicic Acid-Saturated Steam, Matthew W. Piper

Theses and Dissertations

Aircraft structural and engine components are subjected to elevated temperature and steam environments during operation. Turbine blades experience particularly harsh conditions that are approaching the operating temperature limits of current Nickel-based superalloys even with active cooling. Ceramic matrix composites (CMCs), which demonstrate high specific strength and specific stiffness and maintain these properties at elevated temperatures such that active cooling is not required, are prime candidates to replace superalloys as the materials for turbine blades. Ceramic matrix composites are composite materials that consist of a ceramic matrix with fiber reinforcement. This research investigated a silicon carbide (SiC) fiber, Hi-Nicalon™ S, which …

Cement Heat Of Hydration And Thermal Control, Ahmadreza Sedaghat

USF Tampa Graduate Theses and Dissertations

Heat of hydration is a property of Portland cement and a direct result of the chemical reaction between cement and water. The amount of heat released is dependent upon the cement mineralogical composition, curing temperature, water to cement ratio, and cement fineness. High temperature resulting from heat of hydration (thereon referred to as HOH) of cement can affect the hydration process, and consequently the kinetics of development of the mechanical properties of concrete. One of the main reasons triggering the interest in HOH of cement is its implication in thermal cracking of concrete. The high temperature gradient between the inner …

Glass Derived Nanoparticles For Nerve Tissue Repair, D. E. Day, Ali Mohammadkah, Amy Beth Harkins, Laura Marquardt

Materials Science and Engineering Faculty Research & Creative Works

A biocompatible, biodegradable composite material, and method of using nanoparticles formed within the composite material for nerve repair are disclosed. The nanoparticles may not be formed until the glass degrades upon contact with a fluid in vivo or in vitro.

Materials Design On The Origin Of Gap States In A High-Κ/Gaas Interface, Weichao Wang, Cheng Gong, Ka Xiong, Santosh Kc, Robert Wallace, Kyeongjae Cho

Faculty Publications

Given the demand for constantly scaling microelectronic devices to ever smaller dimensions, a SiO2 gate dielectric was substituted with a higher dielectric-constant material, Hf(Zr)O2, in order to minimize current leakage through dielectric thin film. However, upon interfacing with high dielectric constant (high-κ) dielectrics, the electron mobility in the conventional Si channel degrades due to Coulomb scattering, surface-roughness scattering, remote-phonon scattering, and dielectric-charge trapping. III-V and Ge are two promising candidates with superior mobility over Si. Nevertheless, Hf(Zr)O2/III-V(Ge) has much more complicated interface bonding than Si-based interfaces. Successful fabrication of a high-quality device critically depends on understanding and engineering the bonding …

Large-Area Graphene-Based Nanofiltration Membranes By Shear Alignment Of Discotic Nematic Liquid Crystals Of Graphene Oxide, Abozar Akbari, Phillip Sheath, Samuel T. Martin, Dhanraj B. Shinde, Mahdokht Shaibani, Parama Chakraborty Banerjee, Rachel Tkacz, Dibakar Bhattacharyya, Mainak Majumder

Chemical and Materials Engineering Faculty Publications

Graphene-based membranes demonstrating ultrafast water transport, precise molecular sieving of gas and solvated molecules shows great promise as novel separation platforms; however, scale-up of these membranes to large-areas remains an unresolved problem. Here we demonstrate that the discotic nematic phase of graphene oxide (GO) can be shear aligned to form highly ordered, continuous, thin films of multi-layered GO on a support membrane by an industrially adaptable method to produce large-area membranes (13 × 14 cm²) in < 5 s. Pressure driven transport data demonstrate high retention (> 90%) for charged and uncharged organic probe molecules with a hydrated radius above 5 Å as well as modest (30–40%) retention of …

Session C-3: Engineering With Reinforced Concrete, Patrick Young

Professional Learning Day

Does your school need a shelter? Whether your students are concerned about tornadoes, sharknadoes, or a zombie apocalypse, reinforced concrete is the answer! Learn about the history and chemistry of concrete. Make your own. Design a test to evaluate the strength of your concrete, based on anticipated threat (the natural or unnatural disaster of your choice). Conduct that test using small, preformed slabs. Making and breaking concrete is easy and fun, but wear your play-clothes. You will get dirty.

Biopolymeric Mucin And Synthetic Polymer Analogs: Their Structure, Function And Role In Biomedical Applications, Sundar Prasanth Authimoolam, Thomas D. Dziubla

Chemical and Materials Engineering Faculty Publications

Mucin networks are viscoelastic fibrillar aggregates formed through the complex self-association of biopolymeric glycoprotein chains. The networks form a lubricious, hydrated protective shield along epithelial regions within the human body. The critical role played by mucin networks in impacting the transport properties of biofunctional molecules (e.g., biogenic molecules, probes, nanoparticles), and its effect on bioavailability are well described in the literature. An alternate perspective is provided in this paper, presenting mucin’s complex network structure, and its interdependent functional characteristics in human physiology. We highlight the recent advances that were achieved through the use of mucin in diverse areas of bioengineering …

Characterization Of Superabsorbent Poly(Sodium-Acrylate Acrylamide) Hydrogels And Infuence Of Chemical Structure On Internally Cured Mortar, Matthew J. Krafcik, Kendra Erk

School of Materials Engineering Faculty Publications

Internal curing of mortar through superabsorbent polymer hydrogels is explored as a solution to self-desiccation. Four different hydrogels of poly(sodium-acrylate acry- lamide) are synthesized and the impact of chemical composition on mortar is assessed with relative humidity and autogenous shrinkage testing. The hydrogels are characterized with swelling tests in different salt solutions and compression tests. Chemical composition af- fected both swelling kinetics and gel network size. Mortar containing these hydrogels had increased relative humidity and markedly reduced autogenous shrinkage. Additionally, the chemical structure of the hydrogels was found to signifcantly impact the mortar’s shrink- age. Hydrogels that quickly released most …

Carbon-Based Hierarchical Scaffolds For Myoblast Differentiation: Synergy Between Nano-Functionalization And Alignment, Akhil Patel, Shilpaa Mukundan, Wenhu Wang, Anil K. Karumuri, Vinayak Sant, Sharmila M. Mukhopadhyay, Shilpa Sant

Mechanical and Materials Engineering Faculty Publications

While several scaffolds have been proposed for skeletal muscle regeneration, multiscale hierarchical scaffolds with the complexity of extracellular matrix (ECM) haven’t been engineered successfully. By precise control over nano- and microscale features, comprehensive understanding of the effect of multiple factors on skeletal muscle regeneration can be derived. In this study, we engineered carbon-based scaffolds with hierarchical nano- and microscale architecture with controlled physico-chemical properties. More specifically, we built multiscale hierarchy by growing carbon nanotube (CNT) carpets on two types of scaffolds, namely, interconnected microporous carbon foams and aligned carbon fiber mats. Nanostructured CNT carpets offered fine control over nano-roughness and …

Analytical And Experimental Investigation Of Microstructural Alterations In Bearing Steel In Rolling Contact Fatigue, Sina Mobasher Moghaddam

Open Access Dissertations

Rolling Contact Fatigue (RCF) is one the most common failure modes in bearings. RCF is usually associated with particular microstructural alterations. Such alterations (i.e. white etching cracks, butterflies, etc.) which lead to RCF failure are known to be among the most concerning matters to bearing industry.

In the current work, an analytical as well as experimental approaches are used to investigate “butterfly wing” formation, crack initiation and propagation from inclusions. A new damage evolution equation coupled with a FE model is employed to account for the effect of mean stresses and alternating stresses simultaneously to investigate butterfly formation. The proposed …

Bond–Slip Behavior Of Fiber-Reinforced Polymer/Concrete Interface In Single Shear Pull-Out And Beam Tests, Tayyebeh Mohammadi, Baolin Wan, Kent A. Harries

Civil and Environmental Engineering Faculty Research and Publications

It has been assumed that the fiber-reinforced polymer/concrete interface is subjected to in-plane shear condition when intermediate crack debonding failure occurs. Therefore, the single shear pull-out test results are often used to predict the intermediate crack debonding failure in beams. In this study, the behavior of fiber-reinforced polymer-strengthened concrete beams and single shear pull-out specimens were studied experimentally and numerically. The bond–slip behavior of the fiber-reinforced polymer/concrete interface was obtained by single shear pull-out and beam tests. In all beam specimens, a concrete wedge located at the edge of the notch detached with the fiber-reinforced polymer debonding failure. This phenomenon …

Semiconductor Film Grown On A Circular Substrate: Predictive Modeling Of Lattice-Misfit Stresses, Ephraim Suhir, Johann Nicolics, G. Khatibi, M. Lederer

Mechanical and Materials Engineering Faculty Publications and Presentations

effective and physically meaningful analytical predictive model is developed for the evaluation the lattice-misfit stresses (LMS) in a semiconductor film grown on a circular substrate (wafer). The two-dimensional (plane-stress) theory-of-elasticity approximation (TEA) is employed in the analysis. The addressed stresses include the interfacial shearing stress, responsible for the occurrence and growth of dislocations, as well as for possible delaminations and the cohesive strength of a buffering material, if any. Normal radial and circumferential (tangential) stresses acting in the film cross-sections and responsible for its short- and long-term strength (fracture toughness) are also addressed. The analysis is geared to the GaN …