Materials Science and Engineering Commons^™

Silver Dendrite Based Three-Dimensional Surface Enhanced Raman Scattering (Sers) Substrates, Sandesh Rajkumar Shelke

Material Science and Engineering Theses - Archive

Three-dimensional (3D) hierarchical nanostructures have been considered as one of the most promising surface-enhanced Raman spectroscopy (SERS) substrates because it provides high-density hotspots along the three-dimension directions and high surface areas. In this thesis, we report the synthesis process to develop 3D SERS substrates in thin wall quartz capillary tube on Cu wire. These 3D SERS substrates consist of Ag dendrite, Au-Ag and Pd-Ag bimetallic nanostructures which was synthesized by employing simple galvanic replacement reactions (GRR). In this synthesis process Cu wire which is used as substrate was inserted in the thin walled quartz capillary tube and then AgNO3 was …

Synthesis And Characterization Of Plasmonic-Magnetic Au-Co Multilayered Nanorods, Akshay Hande

Material Science and Engineering Theses - Archive

Au nanoparticles (AuNPs) and superparamagnetic iron oxide nanoparticles (SPIONs), in various forms, are considered as biocompatible and are of great interest for diagnostic imaging and therapeutic applications. Biomedical applications of AuNPs originate from the surface plasmon resonance (SPR) effect. In order to tune the SPR wavelength to the near infrared (NIR) region which is required for deep light penetration for in vivo applications, various types of AuNPs such as nanorods, nanoprisms, nanoshells and nanocages have been developed and investigated. SPIONs have also been explored extensively for biomedical applications, including magnetic cell separation, contrast enhancement agents for magnetic resonance imaging (MRI), …

Influence Of Hydrogen Concentration And Distribution On Fracture In Nickel, Arturo Sucre Melfi

Mechanical Engineering Undergraduate Honors Theses

Hydrogen embrittlement is a main factor in the premature failure of metals under stress. Using molecular dynamics (MD) simulations, two models were built in order to study how the presence of hydrogen at interstitial positions within the nickel lattice affects how it fractures. The first model was a 3D single crystal nickel sample, while the other was the same nickel model but with different concentrations and locations of hydrogen positioned at or near the crack tip. Two aspects of fracture were studied and compared between the different simulations: the crack tip velocity and dislocation nucleation from the crack tip. Analysis …

Energy Transfer And Localization In Molecular Crystals, Mitchell A. Wood

Open Access Dissertations

With the aim of developing new technologies for the detection and defeat of energetic materials, this collection of work was focused on using simulations to characterize materials at extremes of temperature, pressure and radiation. Each branch of the work here is collected by which material response is potentially used as the detectable signal.

Where the chemical response is of interest, this work will explore the possibility of non-statistical chemical reactions in condensed-phase energetic materials via reactive molecular dynamics (MD) simulations. We characterize the response of three unique high energy density molecular crystals to different means of energy input: electric fields …

Synthesis Of Acceptors For Use In Donor-Acceptor Copolymers And Characterization Of These Polymers, William D. Walker

Honors Theses

In this thesis, a selenium-derivatized acceptor was synthesized to examine the heavy atom effects of selenium on the position of the frontier molecular orbitals (HOMO/LUMO band gap) as opposed to sulfur in a donor-acceptor copolymer for use in light harvesting and detection applications. Over the course of this research, standard operating protocols for ultraviolet-visible (UV-Vis-NIR) and Fourier transform infrared (FT-IR) spectroscopies, as well as cyclic voltammetry (CV) characterization techniques were established. Once synthesized, the polymers were characterized through use of the established characterization protocols. The selenium-derivatized polymer exhibited a bathochromic shift compared to the sulfur analogue, with a solid-state absorption …

The Effect Of Cure Rate On Glassy Polymer Networks, Kristen M. Van De Voorde

Honors Theses

The formation of glassy polymer networks such as epoxy-amine systems may be altered by varying the temperature ramp rate that is used to cure the system. As a result, the physical and mechanical properties of the network may be changed. This work synthesized the epoxy resins diglycidyl ether of bisphenol A (DGEBA) with the amine curing agent 4,4-diaminodiphenyl sulfone (4,4’-DDS) from 35°C to 180°C using varying temperature ramp rates. Mechanical and structural properties of these samples were then analyzed to determine the effect the different temperature ramp rates had on the formation and properties of the thermoset matrix. These aspects …

Coercivity Enhancement And Gamma Phase Avoidance Of Alnico Alloys, Li Zhang

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The promotion of social progress requires greater levels of energy efficiency, quality and productivity. However, these developments usually come at the cost of the environment. Green technologies such as electric vehicles, wind turbine and solar panels are ironically overshadowed by supply limitations and high prices of rare earth elements. Therefore, it is important to find alternative materials to replace those that contain critical elements. Alnico alloys show high magnetization, high Curie temperature (800°C) and good corrosion resistance, making it one of the best candidates to replace neodymium-based magnets used in electric vehicles.

In this thesis, methods controlling shape anisotropy and …

Phase-Field Models For Simulating Physical Vapor Deposition And Microstructure Evolution Of Thin Films, James Stewart Jr.

Graduate Theses and Dissertations

The focus of this research is to develop, implement, and utilize phase-field models to study microstructure evolution in thin films during physical vapor deposition (PVD). There are four main goals to this dissertation. First, a phase-field model is developed to simulate PVD of a single-phase polycrystalline material by coupling previous modeling efforts on deposition of single-phase materials and grain evolution in polycrystalline materials. Second, a phase-field model is developed to simulate PVD of a polymorphic material by coupling previous modeling efforts on PVD of a single-phase material, evolution in multiphase materials, and phase nucleation. Third, a novel free energy functional …

Molecule Assisted Hydrothermal Synthesis Of Zinc Oxide Nanomaterials With Possible Applicatios In Solar Energy, Austin Major Shearin

Graduate Theses/Dissertations

A molecule assisted hydrothermal synthesis of zinc oxide nanomaterials with L-lysine has been performed to understand the interaction between the biomolecule and the zinc oxide structures during synthesis. The molecule alters the growth kinetics during the formation of the nanomaterials in the hydrothermal reaction. This alters the size and shape of the materials as seen in the scanning electron microscope. X-ray diffraction results confirm the hexagonal Wurtzite structure that zinc oxide forms and indicates no other phases in the nanomaterial. The lattice parameters are not altered, but the atomic percentage of zinc to oxygen within the structure changes as analyzed …

Impedance Spectroscopy Studies Of Yttria Stabilized Zirconia Under Extreme Conditions, Quinlan Blaine Smith

UNLV Theses, Dissertations, Professional Papers, and Capstones

Yttria Stabilized Zirconia (YSZ) is of interest for many industries. Varying amounts of Yttria (Y2O3) can be doped into Zirconia (ZrO2) to create materials with specific characteristics. For instance, 3mol% YSZ (3YSZ) is known to be a super hard material and is used as a coating on drill tips and as an abrasive. Eight mol% YSZ (8YSZ) is commonly used as a solid electrolyte in Solid Oxide Fuel Cells because of its good ionic conducting abilities and stability at high temperatures. In this thesis project, a novel experimental setup was created and used to study the ionic conductivity of (3 …

Thermal Property Measurement Of Thin Fibers By Complementary Methods, Troy Robert Munro

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Thin fibers are prevalent in many engineering materials. Measuring how well heat transfers in such small fibers can be difficult to determine, and previous methods have led to erroneous results. This dissertation details three proposed methods to improve the measurement of the thermal conductivity, thermal diffusivity, and volumetric heat capacity of thin fibers. Of particular interest is natural and synthetic spider silks because previously published values of the natural silk thermal conductivity was similar to copper, an excellent thermal conductor.

The three methods developed are the improved transient electrothermal technique (which was redeveloped to include radiation and convection heat losses …

Direct Band Gap Gallium Antimonide Phosphide (Gasbxp1-X) For Solar Fuels., Harry Benjamin Russell

Electronic Theses and Dissertations

Photoelectrochemical water splitting has been identified as a promising route for achieving sustainable energy future. However, semiconductor materials with the appropriate optical, electrical and electrochemical properties have yet to be discovered. In search of an appropriate semiconductor to fill this gap, GaSbP, a semiconductor never tested for PEC performance is proposed here and investigated. Density functional theory (DFT+U) techniques were utilized to predict band gap and band edge energetics for GaSbP alloys with low amount of antimony. The overall objective of this dissertation is to understand the suitability of GaSb_xP_1-x alloys for photoelectrochemical water splitting application. Specifically, …

Customization Of Titanate Nanofiber Bioscaffolds, Jared Hopkins

Biomedical Engineering Undergraduate Honors Theses

In the field of orthopedic devices implant loosening is a major issue resulting in the majority of device failures. These failures result in the need for costly secondary procedures. To reduce device loosening an improved method of tissue anchoring is required. A previously studied titanate nanofiber bioscaffold has been shown to be safely implantable and to contribute to the differentiation of mesenchymal stem cells to osteocytes. Through the customization of both physical and chemical characteristics this titanate nanofiber bioscaffold was fabricated as a potential means to enhance tissue anchoring for use with orthopedic devices. This customization was enabled by acoustic …

Measuring Relative Humidity In Concrete Pavements As A Method To Assess Asr Mitigation Measures, Remington G. Reed

Civil Engineering Undergraduate Honors Theses

Alkali-silica reaction (ASR) in concrete is partly facilitated by available moisture within the concrete. In order to better understand this facilitation and to develop processes for ASR mitigation methods, it is necessary to establish a means of monitoring internal relative humidity (RH) within the concrete. Current procedures for measuring RH are time consuming; requiring several hours of equilibration time and specific external conditions to yield accurate results. In order to better understand RH monitoring, laboratory tests were conducted using commercially available RH probes and different controlled environments. Probes were carefully monitored and calibrated in controlled environments, and laboratory tests on …

A Study On The Synthesis And Properties Of Gold Nanoparticles And Their Applications To Surface Enhanced Raman Spectroscopy, Daniel Robert Soden

Graduate Theses/Dissertations

Surface enhanced Raman substrates represent a critical step in the sensitivity augmentation of Raman spectroscopy, but due to the time and expertise currently required in the synthesis process, they have not been fully realized within an industrial setting. This thesis aims to investigate a new technique in surface enhanced Raman spectroscopy (SERS) substrate fabrication designed to decrease synthesis time and map the most effective growth parameters for a successful Raman intensity boost. Sputter physical vapor deposition was utilized to deposit a gold (Au) layer on an insulating substrate, and annealing treatments were applied to agglomerate the Au atoms into the …

Experimental And Theoretical Analyses Of The Structural, Electronic And Magnetic Properties Of Novel Inverted Core-Shell A-Cr2o3@A-Mxcr2-Xo3-Y (M=Co, Ni, Mn, Fe) Nanoparticles, Mohammad Delower Hossain

Graduate Theses/Dissertations

I used hydrothermal nano-phase epitaxy technique to synthesize well-ordered a-Cr2O3@a-MxCr2-xO3 (M = Co, Ni, Mn, Fe) inverted core-shell nanoparticles (NPs). This resulted in the formation of novel a-MxCr2-xO3 shells having ferromagnetic/ferrimagnetic (FM/FiM) spin ordering and an antiferromagnetic (AFM) a-Cr2O3 core structure. The combined results from Xray diffraction (XRD) and high resolution transmission electron microscoy (HRTEM) provide evidence of the presence of the corundum phase both in the shell and in the core regions. HRTEM results also show a sharp interface exhibiting epitaxial atomic registry of shell atoms over highly ordered core atoms whereas TEM-Energy dispersive spectroscopy analyses show that the …

High-Pressure Properties Of Several Narrow Bandgap Semiconductors From First-Principles Calculations, Andrew Michael Alvarado

UNLV Theses, Dissertations, Professional Papers, and Capstones

The electronic, thermodynamic, and structural properties of three semiconducting materials, ZnO, InN, and PbS, at high pressure are investigated utilizing first-principles calculations based on density function theory. The first two systems, ZnO and InN, crystalize as hexagonal structures at ambient conditions and transition to a cubic structure at higher pressures. The last system, PbS, is cubic at ambient conditions, but transitions to an orthorhombic structure at higher pressure. At ambient conditions, these materials are well known semiconductors with vast amount of research and a variety of wide ranging applications in electrical devices. However, there is a lack of understanding of …

Synthesis, Characterization, And Electronic Properties Of Novel 2d Materials : Transition Metal Dichalcogenides And Phosphorene., George Anderson

Electronic Theses and Dissertations

Scaling electronic devices has become paramount. The current work builds upon scaling efforts by developing novel synthesis methods and next generation sensing devices based on 2D materials. A new combination method utilizing thermal evaporation and chemical vapor deposition was developed and analyzed to show the possibilities of Transition Metal Dichalcogenide monolayers and heterostructures. The materials produced from the above process showed high degrees of compositional control in both spatial dimensions and chemical structure. Characterization shows controlled fabrication of heterostructures, which may pave the way for future band gap engineering possibilities. In addition, Phosphorene based field effect transistors, photodetectors, and gas …

Investigation Of Optical Properties Of Zinc Oxide Photodetector, Tyler Chism

Graduate Theses and Dissertations

UV photodetection devices have many important applications for uses in biological detection, gas sensing, weaponry detection, fire detection, chemical analysis, and many others. Today’s photodetectors often utilize semiconductors such as GaAs to achieve high responsivity and sensitivity. Zinc oxide, unlike many other semiconductors, is cheap, abundant, non-toxic, and easy to grow different morphologies at the micro and nano scale. With the proliferation of these devices also comes the impending need to further study optics and photonics in relation to phononics and plasmonics, and the general principles underlying the interaction of photons with solid state matter and, specifically, semiconductors. For this …

Stabilization Of Vegetable Oil-Based Quenchants To Thermal-Oxidative Degradation: Experimental Strategy And Effect Of Oxidation On Quenching Performance, Éder Cícero Adão Simêncio, Rosa Lúcia Simêncio Otero, Lauralice De Campos Franceschini Canale, George E. Totten

Mechanical and Materials Engineering Faculty Publications and Presentations

Although petroleum oils continue to be the dominant type of basestock for the formulation of vaporizable quenchants, there is increasing pressure to identify an alternative basestock to address the limitations to their continued use because they are not a renewable basestock and they possess generally poor toxicity and biodegradability properties. Currently the most often cited alternative basestocks are those based on seed oils since they are renewable and usually non-toxic but especially because they are typically readily biodegradable. However, they suffer a critically important deficiency in that they are also typically much less stable to thermal-oxidative degradation than petroleum oils. …