Power and Energy Commons^™

Load Slammer Design For Dc-Dc Converter Testing, Jonathan Hidalgo, Quinton Lacomb

Electrical Engineering

In this work, we dive into the detailed design of a test load or load slammer circuit for DC/DC converters to ensure their correct functioning. This is accomplished through quick variations in frequency, amplitude, and duty cycle of the current being drawn by the converter into the load. Computer simulations of the design were performed using LTSpice and the results show that the load current could be varied per design objectives. Hardware implementation of the design was also conducted and then tested. Results were then compared with the design requirements at lower currents to evaluate the validity of the design. …

Underground Transmission For Renewable Energy: Design, Modeling, And Analysis, Matthew Suen

Master's Theses

A microgrid is a local energy grid that could be disconnected from the larger grid and operate autonomously. This particular segment of the power industry is growing due to its reliability during times of emergency and crisis. Among these benefits are improved efficiency, lower operating costs, renewable generation sources, and improved resiliency of the regional electric grid. Communities can better prepare for unprecedented weather like wildfires, hurricanes, and other natural disasters. Regions that produce renewable energy can export their surplus through high voltage transmission lines to balance power supply and demand needs.

This Underground High-Voltage Transmission Network project aims to …

Facet Dependent Oxygen Evolution Activity Of Spinel Cobalt Oxides, Li-Hua Zhang, Hong-Yuan Chuai, Hai Liu, Qun Fan, Si-Yu Kuang, Sheng Zhang, Xin-Bin Ma

Journal of Electrochemistry

Water splitting is a promising technology to produce clean hydrogen if powered by renewable energies, where oxygen evolution is the rate determining step at an anode. Here we adjust the different crystal planes of the cobalt oxides catalyst to expose more effective active sites through a hydrothermal process, so as to improve the reaction activity for oxygen evolution. The samples were well characterized by TEM, SEM and XRD. Among the three synthetic crystal planes (100), (111) and (110) of spinel cobalt oxides, the (100) crystal plane has the highest intrinsic activity. Combining in-situ infrared and DFT calculations, we …

Structural Degradation Of Ni-Rich Layered Oxide Cathode For Li-Ion Batteries, Jia-Yi Wang, Sheng-Nan Guo, Xin Wang, Lin Gu, Dong Su

Journal of Electrochemistry

Nickel(Ni)-rich layered oxide has been regarded as one of the most important cathode materials for the lithium-ion batteries because of its low cost and high energy density. However, the concerns in safety and durability of this compound are still challenging for its further development. On this account, the in-depth understanding in the structural factors determining its capacity attenuation is essential. In this review, we summarize the recent advances on the degradation mechanisms of Ni-rich layered oxide cathode. Progresses in the structure evolution of Ni-rich oxide are carefully combed in terms of inner evolution, surface evolution, and the property under thermal …

Recent Advances In Structural Regulation On Non-Precious Metal Catalysts For Oxygen Reduction Reaction In Alkaline Electrolytes, Xue Wang, Li Zhang, Chang-Peng Liu, Jun-Jie Ge, Jian-Bing Zhu, Wei Xing

Journal of Electrochemistry

Oxygen reduction reaction (ORR) in alkaline electrolytes is an important electrochemical process for metal-air batteries and anion exchange membrane fuel cells (AEMFCs). However, the sluggish kinetics spurs intensive research on searching robust electrocatalysts. Non-precious metal catalysts (NPMCs) that can circumvent the cost and scarcity issues associated with platinum (Pt)-based materials have been pursued and the challenges lie in the performance improvement to rival Pt-based benchmarks. As the composition and structure of the NPMCs have a significant impact on the catalytic performance, precise regulation on the catalyst structure holds great promise to bridge the activity gap between NPMCs and Pt-based benchmarks. …

Selective Co2 Reduction To Formate On Heterostructured Sn/Sno2 Nanoparticles Promoted By Carbon Layer Networks, Xue Teng, Yanli Niu, Shuaiqi Gong, Xuan Liu, Zuofeng Chen

Journal of Electrochemistry

Tin (Sn)-based materials have emerged as promising electrocatalysts for selective reduction of CO₂ to formate, but their overall performances are still limited by electrode structures which govern the accessibility to active sites, the electron transfer kinetics, and the catalytic stability. In this study, the heterostructured Sn/SnO₂ nanoparticles dispersed by N-doped carbon layer networks (Sn/SnO₂@NC) were synthesized by a melt-recrystallization method taking the low melting point of Sn (m.p. 232^oC). The N-doped carbon layer networks derived from polydopamine could attract more electrons on the electrocatalyst, serve as conductive agents and protect the ultrafine nanoparticles from …

Mass Loading Optimization For Ethylene Glycol Oxidation At Different Potential Regions, Sheng-Nan Sun, Zhi-Chuan Xu

Journal of Electrochemistry

Designing and fabricating the electrocatalysts is attracting more and more attention in recent years due to a global interest in developing techniques for electrochemical energy conversion and storage, as well as elelectro-synthesis of valuable chemicals. The activity is one of the key performance parameters for electrocatalysts, while the observed activity can be affected by mass loading of electrocatalysts. Here, we take cobalt oxide (Co₃O₄)/graphite paper electrode (Co₃O₄/GPE) as a model electrode to demon-strate how the mass loading of Co₃O₄ catalyst influences ethylene glycol (EG) oxidation in alkaline (KOH) by …

Recent Advances In Electrochemical Kinetics Simulations And Their Applications In Pt-Based Fuel Cells, Ji-Li Li, Ye-Fei Li, Zhi-Pan Liu

Journal of Electrochemistry

Theoretical simulations of electrocatalysis are vital for understanding the mechanism of the electrochemical process at the atomic level. It can help to reveal the in-situ structures of electrode surfaces and establish the microscopic mechanism of electrocatalysis, thereby solving the problems such as electrode oxidation and corrosion. However, there are still many problems in the theoretical electrochemical simulations, including the solvation effects, the electric double layer, and the structural transformation of electrodes. Here we review recent advances of theoretical methods in electrochemical modeling, in particular, the double reference approach, the periodic continuum solvation model based on the modified Poisson-Boltzmann …

Magnetic Resonance In Metal-Ion Batteries: From Nmr (Nuclear Magnetic Resonance) To Epr (Electron Paramagnetic Resonance), Bing-Wen Hu, Chao Li, Fu-Shan Geng, Ming Shen

Journal of Electrochemistry

Metal-ion batteries have changed our quotidian lives. The research on the electrode materials for metal-ion battery is the key to improve the performance of the battery. Therefore, understanding the structure-performance relationship of the electrode materials can help to improve the energy density and power density of the materials. Magnetic resonance, including nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR), has been continuously improved during the past three decades, and has gradually become one of the important technologies to study the structure-performance relationship of electrode materials. This paper summarizes the progress of magnetic resonance research from our group on several …

Economic Analysis Of Islanded Microgrid: A Case Study Of Kisiju Village - Coastal Region, Jackson Justo

Tanzania Journal of Engineering and Technology (TJET)

The concept of Microgrid (MG) has gained significant attention of researchers and projects on the business side of electrical power generation and utilization, particularly in electrification of islanded areas such as villages. Most of these microgrids are powered by renewable energy resources (RERs) and they distribute power in low voltage distribution networks. Hence, these systems are faced with reliability problems due to the intermittency nature of RERs which affect the technical as well as the return on Investment of specific projects. In the latter context, reliability and economic analysis of the MG systems is an inevitable choice. This paper presents …

Building Marginal Pattern Library With Unbiased Training Dataset For Enhancing Model-Free Load-Ed Mapping, Qiwei Zhang, Fangxing Li, Wei Feng, Xiaofei Wang, Linquan Bai, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Input-output mapping for a given power system problem, such as loads versus economic dispatch (ED) results, has been demonstrated to be learnable through artificial intelligence (AI) techniques, including neural networks. However, the process of identifying and constructing a comprehensive dataset for the training of such input-output mapping remains a challenge to be solved. Conventionally, load samples are generated by a pre-defined distribution, and then ED is solved based on those load samples to form training datasets, but this paper demonstrates that such dataset generation is biased regarding load-ED mapping. The marginal unit and line congestion (i.e., marginal pattern) exhibit a …

Facile One-Step Hydrothermal Method For Nico2s4/Rgo Nanocomposite Synthesis For Efficient Hybrid Supercapacitor Electrodes, Ahmed Mysara, Sayed Y. Attia, Fouad I. El-Hosiny, M A. Sadek, Saad G. Mohamed, M M. Rashad

Nanotechnology Research Centre

Spinel nickel-cobalt sulfide (NiCo2S4) supported on reduced graphene oxide (rGO) was fabricated through a facile one-step hydrothermal method for energy storage applications. The distribution of the NiCo2S4 nanoparticles on the rGO surface was found to improve the supercapacitive performance of the assembled device. The NiCo2S4/rGO nanocomposite exhibits outstanding electrochemical behavior with a capacity (C)/specific capacitance (Cs) of 536 C g−1/1072 F g−1 at a current density of 1 A g−1. To further investigate the electrochemical behavior of the NiCo2S4/rGO nanocomposite, a hybrid supercapacitor (HSC) was constructed utilizing a NiCo2S4/rGO positive electrode and an activated carbon …

Joint Bidding Decision Of Wind Farms And Energy Storage Based On Newsvendor Model, Xinyue Sun, Jian Liu, Meng Ou, Yanyan Liu

Electrical and Computer Engineering Faculty Research & Creative Works

Currently, renewable energy generation has received more and more attention. This article focuses on wind energy generation, one of the renewable energy sources. Aiming at the intermittent and unpredictable wind power problems, according to the day ahead bidding mechanism in the power market, this paper introduces the energy storage system to maximize wind power merchants profit based on the newsvendor model. First, this paper focuses on the wind farms combined with storage system to put forward the optimal bidding decision of selling or buying electricity to the market one day in advance and the optimal bidding amount. Then, we analyze …

Acetate Solutions With 3.9 V Electrochemical Stability Window As An Electrolyte For Low-Cost And High-Performance Aqueous Sodium-Ion Batteries, Dao-Yun Lan, Xiao-Feng Qu, Yu-Ting Tang, Li-Ying Liu, Jun Liu

Journal of Electrochemistry

Low-cost and high-safety aqueous sodium-ion batteries have received widespread attention in the field of large-scale energy storage, but the narrow electrochemical stability window (1.23 V) of water limits the energy density of aqueous sodium-ion batteries. The “water-in-salt” strategy which uses the interaction between cations and water molecules in the solution can inhibit water decomposition and broaden the electrochemical stability window of water. In this work, two types of low-cost salts, namely, ammonium acetate (NH₄CH₃COOH) and sodium acetate (NaCH₃COOH), were used to configure a mixed aqueous electrolyte for aqueous sodium-ion batteries. The solution consisted of …

Synthesis Of Lithium-Rich Manganese-Based Layered Cathode Materials And Study On Its Structural Evolution Of First Cycle Overcharge, Chen-Xu Luo, Chen-Guang Shi, Zhi-Yuan Yu, Ling Huang, Shi-Gang Sun

Journal of Electrochemistry

Lithium-rich manganese-based cathode materials have become one of promising cathode materials due to their low cost and large discharge specific capacity exceeding 250 mAh·g^-1. However, their problems such as low coulombic efficiency of first cycle and apparent voltage decay influence commercialization process. The high charging voltage will cause instability of structure and increase the hidden danger of the battery. Therefore, structural evolution of first cycle at higher voltage needs to be further studied. In this work, the precursor was synthesized by the co-precipitation method, and the lithium-rich manganese-based layered cathode materials were prepared by lithium-mixed and high-temperature sintering, …

Progress Of Pt-Based Catalysts In Proton-Exchange Membrane Fuel Cells: A Review, Long Huang, Hai-Chao Xu, Bi Jing, Qiu-Xia Li, Wei Yi, Shi-Gang Sun

Journal of Electrochemistry

Fuel cells are energy conversion devices that convert chemical energy directly into electricity. It has the advantages of high energy density, high utilization efficiency of fuel, clean and noiseless during working. Among all kinds of fuel cells, proton exchange membrane fuel cells (PEMFCs) are most popular since PEMFCs function at near ambient temperature, while their power densities are higher than those of other fuel cells. Currently, Pt-based nanomaterials are still the unreplaceable catalysts in commercialized PEMFCs. The lack of low-cost and high-performance cathode catalysts is still one of key factors that hampers the commercialization of PEMFCs. In this review, the …

Advances Of Phosphide Promoter Assisted Pt Based Catalyst For Electrooxidation Of Methanol, Meng Li, Li-Gang Feng

Journal of Electrochemistry

Transition metal phosphide (TMP), as an ideal catalytic promoter in methanol fuel oxidation, has received increased attention because of its multifunctional active sites, tunable structure and composition, as well as unique physical and chemical properties and efficient multi-composition synergistic effect. Some advances have been made for this catalyst system recently. In the current review, the research progresses of transition metal phosphides (TMPs) in the assisted electrooxidation of methanol including the catalysts fabrication and their performance evaluation for methanol oxidation are reviewed. The promotion effect of TMPs has been firstly presented and the catalyst systems based on the different metal centers …

A High-Performance Continuous-Flow Mea Reactor For Electroreduction Co2 To Formate, Pei-Xuan Liu, Lu-Wei Peng, Rui-Nan He, Lu-Lu Li, Jin-Li Qiao

Journal of Electrochemistry

The electrochemical carbon dioxide reduction reaction (CO₂RR) is a promising approach to produce liquid fuels and industrial chemicals by utilizing intermittent renewable electricity for mitigating environmental problems. However, the traditional H-type reactor seriously limits the electrochemical performance of CO₂RR due to the low CO₂ solubility in electrolyte, and high ohmic resistance caused by the large distance between two electrodes, which is unbeneficial for industrial application. Herein, we demonstrated a high-performance continuous flow membranes electrode assembly (MEA) reactor based on a self-growing Cu/Sn bimetallic electrocatalyst in 0.5 mol·L^-1 KHCO₃ for converting CO₂ to …

Oxidative Efficiency Of Ozonation Coupled With Electrolysis For Treatment Of Acid Wastewater, Ze-You Hu, Feng-Yun Xiang, Ji-Qiang Mao, Ya-Lei Ding, Shao-Ping Tong

Journal of Electrochemistry

Establishment of an ozone-based advanced oxidation process (AOPs-O₃) for effective treatment of acid wastewater is an important and difficult task. The process of ozonation coupled with electrolysis (electrolysis-ozonation, E-O₃) has been reported to effectively degrade pollutants in neutral solution. We studied the efficiency of E-O₃ for degradation of acetic acid (HAc, an ozone inert chemical) in acid solution and found that E-O₃ had high oxidative efficiency at pH less than 3. For example, 52.2% of 100 mg·L^-1 HAc could be removed by E-O₃ in 120 min at pH 1.0, but only 2.2% …

Recent Advances Of Wind-Solar Hybrid Renewable Energy Systems For Power Generation: A Review, Pranoy Roy, Jiangbiao He, Tiefu Zhao, Yash Veer Singh

Electrical and Computer Engineering Faculty Publications

A hybrid renewable energy source (HRES) consists of two or more renewable energy sources, such as wind turbines and photovoltaic systems, utilized together to provide increased system efficiency and improved stability in energy supply to a certain degree. The objective of this study is to present a comprehensive review of wind-solar HRES from the perspectives of power architectures, mathematical modeling, power electronic converter topologies, and design optimization algorithms. Since the uncertainty of HRES can be reduced further by including an energy storage system, this paper presents several hybrid energy storage system coupling technologies, highlighting their major advantages and disadvantages. Various …