Power and Energy Commons^™

Design And Fabrication Of An Eddy Current Brake Dynamometer For Efficiency Determination Of Electric Wheelchair Motors, Wesley Brin

Browse all Theses and Dissertations

Electric wheelchairs have a considerable impact on improving the quality of life for the millions of disabled persons around the world. These modern pieces of technology offer freedom and mobility for disabled persons to interact with the world outside of their homes. The goal of this project is to assist in advancements of conventional electric wheelchairs. This includes replacing the heavy, bulky, and inefficient lead acid batteries and worm gear drive systems with lithium-ion batteries and wheel hub motors in order to decrease weight and size, and increase efficiency. This master thesis research is focused on designing, fabricating, and testing …

Fpga To Power System Theorization For A Fault Location And Specification Algorithm, Christina Yeoman

Theses and Dissertations--Electrical and Computer Engineering

Fault detection and location algorithms have allowed for the power industry to alter the power grid from the traditional model to becoming a smart grid. This thesis implements an already established algorithm for detecting faults, as well as an impedance-based algorithm for detecting where on the line the fault has occurred and develops a smart algorithm for future HDL conversion using Simulink. Using the algorithms, the ways in which this implementation can be used to create a smarter grid are the fundamental basis for this research. Simulink was used to create a two-bus power system, create environment variables, and then …

Active Optimal Control Strategies For Increasing The Efficiency Of Photovoltaic Cells, Sharif Aljoaba

Theses and Dissertations--Electrical and Computer Engineering

Energy consumption has increased drastically during the last century. Currently, the worldwide energy consumption is about 17.4 TW and is predicted to reach 25 TW by 2035. Solar energy has emerged as one of the potential renewable energy sources. Since its first physical recognition in 1887 by Adams and Day till nowadays, research in solar energy is continuously developing. This has lead to many achievements and milestones that introduced it as one of the most reliable and sustainable energy sources. Recently, the International Energy Agency declared that solar energy is predicted to be one of the major electricity production energy …

Power System State Estimation Using Phasor Measurement Units, Jiaxiong Chen

Theses and Dissertations--Electrical and Computer Engineering

State estimation is widely used as a tool to evaluate the real time power system prevailing conditions. State estimation algorithms could suffer divergence under stressed system conditions. This dissertation first investigates impacts of variations of load levels and topology errors on the convergence property of the commonly used weighted least square (WLS) state estimator. The influence of topology errors on the condition number of the gain matrix in the state estimator is also analyzed. The minimum singular value of gain matrix is proposed to measure the distance between the operating point and state estimation divergence.

To study the impact of …

Power Control Of Single-Stage Pv Inverter For Distribution System Volt-Var Optimization, Xiao Liu

Theses and Dissertations--Electrical and Computer Engineering

The output power variability of intermittent renewable sources can cause significant fluctuations in distribution system voltages. A local linear controller that exploits the capability of a photovoltaic inverter to provide both real and reactive power is described. This controller substitutes reactive power for real power when fluctuations in the output of the photovoltaic source are experienced. In this way, the inverter can help mitigate distribution system voltage fluctuations. In order to provide real and reactive to the grid, a three-phase grid-connected single-stage photovoltaic system with maximum power point tracking and power control is described. A method of reducing the current …

Contingency Analysis Of Power Systems In Presence Of Geomagnetically Induced Currents, Sivarama Karthik Vijapurapu

Theses and Dissertations--Electrical and Computer Engineering

Geomagnetically induced currents (GIC) are manifestations of space weather phenomena on the electric power grid. Although not a new phenomenon, they assume great importance in wake of the present, ever expanding power grids. This thesis discusses the cause of GICs, methodology of modeling them into the power system and the ramifications of their presence in the bulk power system. GIC is treated at a micro level considering its effects on the power system assets like Transformers and also at a macro level with respect to issues like Voltage instability. In illustration, several simulations are made on a transformer & the …

Dc-Dc Converter Input Protection System For The Energy Harvesting From Exercise Machines (Ehfem) Project, Ryan Turner, Zack Weiler

Electrical Engineering

The ongoing Energy Harvesting from Exercise Machines (EHFEM) project at Cal Poly San Luis Obispo seeks to provide renewable energy without the high cost of implementation by harvesting DC power generated on machines used for physical exercise. The EHFEM project consists of numerous subprojects that involve converting different types of exercise machines for power generation. This project specifically works by scaling the output voltage from an elliptical machine using a DC-DC converter and sending it through an Enphase Micro-inverter to feed AC power back to the power grid and minimize energy spending. As a subset of the much larger project, …

Geothermal Injection Well Monitoring, Timothy Rempher

Electrical Engineering

People depend on electricity all over the world. They depend on it for anything from drying their hair to global communications to heating up food. Many methods of power generation exist, each using a different fuel such as nuclear power, natural gas, coal, wind or the sun. This project focuses on a power plant which uses the naturally hot water in the ground to generate electricity. This process of generating power is called “Geothermal.” This project consists of two parts. The first and major part is the design logic of a PLC program that monitors the flow rate of an …

Wireless Sensor Networks And The Internet Of Things, Yingtao Jiang, Lei Zhang, Ling Wang

Electrical & Computer Engineering Faculty Research

It is estimated that mobile internet devices that can act as sensors will outnumber humans this year (2013), and by 2015, there will be about 15 billion internet-connected devices. Related applications are thriving in commercial, civic, and scientific operations that involve sensors, web, and services, leading by both academic societies and industry companies. It is commonly accepted that the next generation of internet is becoming the “Internet of Things (IoT)” which is a worldwide network of interconnected objects and their virtual representations uniquely addressable based on standard communication protocols. Identified by a unique address, any object including computers, mobile phones, …

Tunable Fano Resonances Based On Two-Beam Interference In Microring Resonator, Ting Hu, Ping Yu, Chen Qui, Huiye Qui, Fan Wang, Mei Yang, Xiaoqing Jiang, Hui Yu, Jianyi Yang

Electrical & Computer Engineering Faculty Research

In this paper, a resonant system is demonstrated on silicon-on-insulator wafer to achieve tunable Fano resonances. In this system, the Fano resonance originates from the interference of two beams resonant in the microring resonator. The shapes of the Fano resonances are tunable through controlling the phase difference of the two beams. Both large slope and high extinctionratio (ER) are obtained when the phase difference is 0.5π or 1.5π. Experimental results show that Fano resonances with steep slope and ER over 20 dB are achieved in the whole free spectral range by controlling the microheaters to meet the phase condition.

Estimation Of Performance Indices For The Planning Of Sustainable Transportation Systems, Alexander Paz, Pankaj Maheshwari

Electrical & Computer Engineering Faculty Research

In the context of sustainable transportation systems, previous studies have either focused only on the transportation systemor have not used a methodology that enables the treatment of incomplete, vague, and qualitative information associated with the available data. This study proposes a system of systems (SOS) and a fuzzy logic modeling approach. The SOS includes the Transportation, Activity, and Environment systems. The fuzzy logic modeling approach enables the treatment of the vagueness associated with some of the relevant data. Performance Indices (PIs) are computed for each system using a number of performance measures. The PIs illustrate the aggregated performance of each …

Framework For Simulation Of Heterogeneous Mpsoc For Design Space Exploration, Bisrat Tafesse, Venkatesan Muthukumar

Electrical & Computer Engineering Faculty Research

Due to the ever-growing requirements in high performance data computation, multiprocessor systems have been proposed to solve the bottlenecks in uniprocessor systems. Developing efficient multiprocessor systems requires effective exploration of design choices like application scheduling, mapping, and architecture design. Also, fault tolerance in multiprocessors needs to be addressed. With the advent of nanometer-process technology for chip manufacturing, realization of multiprocessors on SoC (MpSoC) is an active field of research. Developing efficient low power, fault-tolerant task scheduling, and mapping techniques for MpSoCs require optimized algorithms that consider the various scenarios inherent in multiprocessor environments. Therefore there exists a need to develop …

Neural Network Based Control Of Integrated Recycle Heat Exchanger Superheaters In Circulating Fluidized Bed Boilers, David D. Biruk

UNF Graduate Theses and Dissertations

The focus of this thesis is the development and implementation of a neural network model predictive controller to be used for controlling the integrated recycle heat exchanger (Intrex) in a 300MW circulating fluidized bed (CFB) boiler. Discussion of the development of the controller will include data collection and preprocessing, controller design and controller tuning. The controller will be programmed directly into the plant distributed control system (DCS) and does not require the continuous use of any third party software.

The intrexes serve as the loop seal in the CFB as well as intermediate and finishing superheaters. Heat is transferred to …

Optimal Power Generation In Microgrids Using Agent-Based Technology, Thair Mahmoud

Theses: Doctorates and Masters

The existing power grids that form the basis of the respective electrical power infrastructures for various states and nations around the world, are expected to undergo a period of rapid change in the near future. The key element driving this change is the emergence of the Smartgrid. The Smartgrid paradigm represents a transition towards an intelligent, digitally enhanced, two-way power delivery grid. The aim of the Smartgrid is to promote and enhance the e_cient management and operation of the power generation and delivery facilities, by incorporating advanced communications, information technology, automation, and control methodologies into the power grid proper. Smartgrid's …

Optimal Control Of Power Quality In Microgrids Using Particle Swarm Optimisation, Waleed Abood Baddai Al-Saedi

Theses: Doctorates and Masters

Driven by environmental protection, economic factors, conservation of energy resources, and technical challenges, the microgrid has emerged as an innovative small-scale power generation network. Microgrids consist of a cluster of Distributed Generation units that encompass a portion of an electric power distribution system and may rely on different energy sources. Functionally, the microgrid is required to provide adequate levels and quality of power to meet load demands. The issue of power quality is significant as it directly affects the characteristics of the microgrid’s operation. This problem can be defined as an occurrence of short to long periods of inadequate or …

Online Nonintrusive Condition Monitoring And Fault Detection For Wind Turbines, Xiang Gong

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The goal of this dissertation research is to develop online nonintrusive condition monitoring and fault detection methods for wind turbine generators (WTGs). The proposed methods use only the current measurements that have already been used by the control and protection systems of WTGs; no additional sensors or data acquisition devices are needed. Current-based condition monitoring and fault detection techniques have great economic benefits and the potential to be adopted by the wind energy industry. However, there are challenges in using current measurements for wind turbine condition monitoring and fault detection. First, it is a challenge to extract WTG fault signatures …

Electrocatalytic Oxidation Of Formic Acid On Pd/Ni Heterostructured Catalyst, Mingjun Ren, Liangliang Zou, Ju Chen, Ting Yuan, Qinghong Huang, Haifeng Zhang, Hui Yang, Songlin Feng

Journal of Electrochemistry

A Pd/Ni bimetallic nanostructured electrocatalyst was fabricated via a two-step reduction route. Owing to an epitaxial growth of Pd atoms on the surface of Ni nanoparticles, heterostructured Pd/Ni nanocomposites were formed and verified by high resolution transmission electron microscopy combined with energy-dispersion X-ray spectroscopy. X-ray diffraction confirmed that the as-prepared Pd/Ni nanocomposites possessed a single face-centered-cubic (fcc) Pd structure, probably due to a weaker diffraction intensity of metallic Ni and/or overlapping by that of Pd. The intrinsic catalytic activity on the Pd/Ni is higher than that on the Pd. Moreover, the durability of formic acid oxidation on the Pd/Ni was …

Electrochemical Performance Of Screen-Printed Composite Coatings Of Conducting Polymers And Carbon Nanotubes On Titanium Bipolar Plates In Aqueous Asymmetrical Supercapacitors, Xiaohang Zhou, George Z. Chen

Journal of Electrochemistry

Composites of conducting polymers (polypyrrole and polyaniline) with acid treated multi-walled carbon nanotubes were formulated into printable aqueous inks, with the aid of functional additives (benzethonium chloride as a surfactant with or without polyvinyl alcohol as a binder). The inks were screen-printed as fairly uniform coatings of various mass loading densities and areas (up to 75 mg cm^-2 and 100 cm²) on thin titanium plates (0.1 mm in thickness). These screen-printed plates were used to fabricate both unit cell and multi-cell stack of asymmetrical supercapacitors with screen-printed negative electrodes of activated carbon (pigment black) in aqueous electrolytes …

Ternary Alloy Electrocatalysts For Oxygen Reduction Reaction, Jin Luo, Lefu Yang, Binghui Chen, Chuanjian Zhong

Journal of Electrochemistry

Proton exchange membrane fuel cell represents an important electrochemical energy conversion device with many attractive features in terms of efficiency of energy conversion and minimization of environmental pollution. However, the large overpotential for oxygen reduction reaction at the cathode and the low activity, poor durability and high cost of platinum-based catalysts in the fuel cells constitute a focal point of major barriers to the commercialization of fuel cells. The development of nanostructured catalysts shows promises to addresses some of the challenging problems. The ability to engineer the composition and nanostructure of nanoalloy catalysts is important for developing active, robust and …

Advances And Challenges Of Intermediate Temperature Solid Oxide Fuel Cells: A Concise Review, Sanping Jiang

Journal of Electrochemistry

Fuel cell is an electrochemical energy conversion device to directly convert the chemical energy of fuels to electricity. Among all types of fuel cells, solid oxide fuel cells (SOFCs) operating at intermediate temperatures of 600~800 ^oC offer an attractive option that is much more fuel flexible than low temperature fuel cells such as proton exchange membrane fuel cells, and is suitable for a wide range of applications. However, two main challenges remain towards the commercial viability and acceptance of the SOFC technologies: the cost and durability. Both are critically dependent on the process, fabrication, performance, chemical and microstructural stability …