Electrical and Computer Engineering Commons^™

Improvement Of Lithium-Metal Electrode All-Solid-State Batteries Performance By Shot Peening And Magnetron Sputtering, Atsuro Okumura, Manabu Kodama

15th International Conference on Shot Peening

To enable fast charging in lithium-metal anode all-solid-state batteries, suppressing lithium dendrite formation at the solid electrolyte (SE) interface is critical. Increasing fracture toughness via shot peening (SP) and improving interfacial contact with Au sputtering can inhibit dendrite growth. However, conventional sputtering may reduce toughness due to localized thermal damage. This study investigated magnetron sputtering as a low-damage, plasma-based Au deposition method. SEs with and without SP were fabricated and coated via normal and magnetron sputtering. Critical current density (CCD) and fracture toughness were evaluated. Without SP, CCD improvement was limited regardless of sputtering method due to poor bonding. With …

Experimental Study Of Energy Conversion Efficiency Improvement Of Photovoltaic (Pv) Module Using Hybrid Cooling System, Olufisayo O. Babalola, Olatunji W. Olademeji, Joseph B. Samson

Al-Bahir

The elevation of the photovoltaic module operating temperature resulting in diminution of its energy conversion efficiency is one of the key limitations to its application. A decrease of power delivered performance by 0.4-0.5% per 1 rise over its Standard Test Condition (STC) accounted for the overheating of the PV module. This study evaluates the energy conversion efficiency improvement of a PV module using hybrid cooling system. An hourly segmented hybrid cooling system made up of aluminum fins as passive cooling segment and helical structured copper tubules for water conduction as active cooling segment helps to improve the energy conversion efficiency …

Robust Fault Detection And Classification In Power Systems Via Physics-Informed And Data-Driven Learning, Biswash Basnet, Varsha Sen

Graduate Student Scholarship

Electrical faults in power transmission systems can severely affect grid stability, equipment safety, and operational reliability. Traditional protection schemes, particularly distance relays, depend on apparent impedance computation that changes with error, creating a risk of misclassification. The results from relay overreach, underreach, or complete maloperation due to CT/PT saturation lead to developing problems in high impedance situations. These limitations highlight the need for adaptive, data-driven alternatives. This paper proposes an intelligent fault detection and classification model based on supervised machine learning techniques that overcome these challenges. The system’s robustness was validated under different training sizes and Gaussian noise levels, demonstrating …

An Event-Based Time-Incremented Snn Architecture Supporting Energy-Efficient Device Classification, David L. Weathers, Michael A. Temple, Brett J. Borghetti

Faculty Publications

Recent advances in Radio Frequency (RF)-based device classification have shown promise in enabling secure and efficient wireless communications. However, the energy efficiency and low-latency processing capabilities of neuromorphic computing have yet to be fully leveraged in this domain. This paper is a first step toward enabling an end-to-end neuromorphic system for RF device classification, specifically supporting development of a neuromorphic classifier that enforces temporal causality without requiring non-neuromorphic classifier pre-training. This Spiking Neural Network (SNN) classifier streamlines the development of an end-to-end neuromorphic device classification system, further expanding the energy efficiency gains of neuromorphic processing to the realm of RF …

Enhancement Of The Received Signal Strength In Smart Grid Communication Systems, Doaa Talaat Elsherbiny, Mona Mohamed Shokair Prof., Mohamed Shalaby, Salah Elden Khamis, Sameh A. Napoleon

Journal of Engineering Research

Smart grids are networks that contain intelligence from the generation stage to the distribution stage. These grids can actually have excellent power efficiency and automated control thanks to intelligence. Within smart grids, the communication mechanism is a crucial area of study. There should be a dependable communication system in the smart grid. A comprehensive mathematical model for a communication system within smart grids is derived in this work. Additionally, the simulation findings validate the mathematical model that was derived. Additionally, experiments are being conducted to apply polar convolutional parallel code PCPC to enhance the performance of the suggested communication system. …

Interference Management For Device-To-Device Communications In Heterogeneous Cellular Networks Using Deep Reinforcement Learningdevice-To-Device Communication; Mmwave Communication; Spectrum Resource Allocation; Deep Reinforcement Learning; Hcns, Suzan Mohamed Shukry

Journal of Engineering Research

Integrating Device-to-Device (D2D) communication into Heterogeneous Cellular Networks (HCNs) augmented with Millimeter Wave (mmWave) technology presents a compelling approach to fulfill the escalating demands for ultra-high data throughput in next-generation wireless systems. Although these advancements significantly improve data transmission efficiency and network scalability, the coexistence of D2D and cellular users within a shared spectral environment triggers considerable interference, complicating network coordination. To mitigate this, the interference scenario is modeled as a unified optimization task involving mode selection and resource allocation, aiming to enhance the aggregate system throughput while adhering to strict SINR constraints for both communication tiers. To tackle this …

Design And Performance Analysis Of A Frequency-Reconfigurable Rectangular Patch Antenna With Dual-Slot Defected Ground Structure For Gsm Band, Sara Abdelbaset, Ashraf Khalaf, Amr Hussien, Ahmed A. Kabeel

Journal of Engineering Research

In this paper, an innovative frequency-tunable rectangular patch antenna is presented, featuring interlaced circular and U-shaped narrow slots, combined with a rectangular-shaped defected ground structure (DGS). This design is specifically developed to produce radiation patterns similar to those of traditional dipole antennas. The integration of the rectangular DGS with three RF varactor diodes, along with two equivalent microstrip conductors, enables a tunable operating frequency band that ranges from 1.08 GHz to 1.7 GHz, achieving a total bandwidth of 0.62 GHz. The DC biasing network connected to the three RF varactor diodes is utilized to finely tune and adjust the resonance …

Developing Workflows For Passive Acoustic Detection Of Bedload Transport, Quinn Morgan

Dissertations and Theses

Bedload transport is defined as the amount of sediment, including gravel and rocks, traveling down stream. Monitoring bedload transport is important for river safety, hydrological studies and conservation efforts. Existing methods of directly measuring bedload transport (or bedload flux) involve lowering a collection device into a river and measuring the sediment collected; which can be expensive and time consuming. Hydroacoustic sensors, such as hydrophones, have had success tracking bedload flux remotely. This works by measuring the relatively high frequency of sediment impacts to map onto total bedload transported. No perfected method for detection of sediment generated noise (SGN) currently exists. …

Underwater Acoustic Integrated Sensing And Communication: A Spatio-Temporal Freshness For Intelligent Resource Prioritization, Ananya Hazarika, Mehdi Rahmati

Electrical and Computer Engineering Faculty Publications

Underwater acoustic communication faces significant challenges including limited bandwidth, high propagation delays, severe multipath fading, and stringent energy constraints. While integrated sensing and communication (ISAC) has shown promise in radio frequency systems, its adaptation to underwater environments remains challenging due to the unique acoustic channel characteristics and the inadequacy of traditional delay-based performance metrics that fail to capture the spatio-temporal value of information in dynamic underwater scenarios. This paper presents a comprehensive underwater ISAC framework centered on a novel Spatio-Temporal Information-Theoretic Freshness metric that fundamentally transforms resource allocation from delay minimization to value maximization. Unlike conventional approaches that treat all …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Modeling Of Urea Drying And Granulation Process In Fluidized Bed, Jalolitdin Pakhritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

This article is devoted to the mathematical modeling of urea drying and granulation processes in a fluidized bed. A brief description is provided for the functional blocks included in the mathematical model, along with the required parameters that form an integrated representation of the technological process. The SR-POLAR model is used to describe a phase equilibrium between the components involved. The interconnections between functional blocks are shown in the process flow diagram. Block diagrams for modeling a multi-chamber granulation unit and the cooling system for the resulting granules are presented. Granule growth in the fluidized bed is described using a …

Increasing The Robustness Of A Control System For A Complex Dynamic Plant By Correcting Nonlinearity In The Warping Process, Tukhtamurod Khayitmurodovich Avezov, Zokhid Ergashboyevich Iskandarov

Chemical Technology, Control and Management

The paper discusses the challenges of enhancing the robustness of a control system for a complex dynamic plant by addressing nonlinearity in the warping process. Devices that ensure the stability of the control system against parameter non-stationarity on the warping machine are referred to as state controllers. The operating principle of these devices relies on providing artificial nonlinearity to the rear connection circuit of the control system's actuator. However, this nonlinearity is implemented using components that consider the parameters of low control quality. Therefore, it is necessary to continuously adjust the nonlinearity parameters to, on one hand, reduce the load …

Optimizing Beer Fermentation Through Intelligent Control, Azizbek Nodirbekovich Yusupbekov, Mirjalol Yusupov

Chemical Technology, Control and Management

This paper presents an intelligent control approach for optimizing the beer fermentation process using fuzzy logic and adaptive neuro-fuzzy inference systems. By incorporating multivariable inputs—temperature error and pH deviation—the proposed system effectively handles the nonlinear dynamics and biological variability inherent in fermentation. Simulation results demonstrate improved control accuracy, responsiveness, and robustness compared to conventional methods, making the approach suitable for integration in modern brewery automation systems.

Algorithms For The Synthesis Of Adaptive Control Systems Based On The Speed-Gradient Method, Oxunjon Boborayimov

Chemical Technology, Control and Management

This paper discusses the synthesis algorithms for adaptive control systems based on the speed-gradient method. Adaptive control systems with implicit reference and adjustable models are synthesized using speed-gradient techniques, which reduce the requirements for the main control loop structure and the completeness of measurement data. Stable adaptive decentralized control algorithms are developed for a class of interconnected systems with nonlinear local dynamics and uncertainties, ensuring the stability of individual subsystems and the overall system while accounting for their interactions. To incorporate inter-subsystem interactions into the overall control law, an adaptation algorithm based on the speed-gradient method is introduced. A synthesis …

Modern Methods Of Self-Monitoring, Diagnostics, And Fault Tolerance In Flow Measurement Systems, Elbek Ortiqov

Chemical Technology, Control and Management

This article investigates various methods and tools for self-monitoring and fault tolerance in flow measurement transducers used in industrial processes. The study focuses on key techniques such as the use of redundancy, generation of reference values, analysis of measurement signals, and control of disturbance variables. These methods allow transducers to detect potential faults, ensure reliable operation, and maintain measurement accuracy even under adverse conditions. The article highlights how self-monitoring contributes to improving system safety, increasing reliability, and reducing downtime. It also discusses the integration of intelligent monitoring systems that support predictive maintenance and real-time diagnostics. Fault-tolerant sensors with self-monitoring capabilities …

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Evaluation Of Deep Learning Techniques In Road Sign Recognition, Latafat Abbas Gardashova, Haji Fakhraddin Hajiyev

Chemical Technology, Control and Management

Deep learning has transformed the computer vision field and greatly improved the performance and efficiency of road sign recognition systems. This research compares different deep learning methods, such as Convolutional Neural Networks (CNNs), Recurrent Neural Networks (RNNs), and hybrid models, in terms of their ability to effectively detect and classify road signs under various conditions. The study compares performance measures such as accuracy, processing speed, and robustness to environmental conditions like low lighting, occlusion, and adverse weather. The results show that CNN-based methods, especially those with transfer learning and ensemble techniques, have better performance in real-time scenarios. Problems like computational …

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …