Electrical and Computer Engineering Commons^™

Optimizing Beer Fermentation Through Intelligent Control, Azizbek Nodirbekovich Yusupbekov, Mirjalol Yusupov

Chemical Technology, Control and Management

This paper presents an intelligent control approach for optimizing the beer fermentation process using fuzzy logic and adaptive neuro-fuzzy inference systems. By incorporating multivariable inputs—temperature error and pH deviation—the proposed system effectively handles the nonlinear dynamics and biological variability inherent in fermentation. Simulation results demonstrate improved control accuracy, responsiveness, and robustness compared to conventional methods, making the approach suitable for integration in modern brewery automation systems.

Algorithms For The Synthesis Of Adaptive Control Systems Based On The Speed-Gradient Method, Oxunjon Boborayimov

Chemical Technology, Control and Management

This paper discusses the synthesis algorithms for adaptive control systems based on the speed-gradient method. Adaptive control systems with implicit reference and adjustable models are synthesized using speed-gradient techniques, which reduce the requirements for the main control loop structure and the completeness of measurement data. Stable adaptive decentralized control algorithms are developed for a class of interconnected systems with nonlinear local dynamics and uncertainties, ensuring the stability of individual subsystems and the overall system while accounting for their interactions. To incorporate inter-subsystem interactions into the overall control law, an adaptation algorithm based on the speed-gradient method is introduced. A synthesis …

Modern Methods Of Self-Monitoring, Diagnostics, And Fault Tolerance In Flow Measurement Systems, Elbek Ortiqov

Chemical Technology, Control and Management

This article investigates various methods and tools for self-monitoring and fault tolerance in flow measurement transducers used in industrial processes. The study focuses on key techniques such as the use of redundancy, generation of reference values, analysis of measurement signals, and control of disturbance variables. These methods allow transducers to detect potential faults, ensure reliable operation, and maintain measurement accuracy even under adverse conditions. The article highlights how self-monitoring contributes to improving system safety, increasing reliability, and reducing downtime. It also discusses the integration of intelligent monitoring systems that support predictive maintenance and real-time diagnostics. Fault-tolerant sensors with self-monitoring capabilities …

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Evaluation Of Deep Learning Techniques In Road Sign Recognition, Latafat Abbas Gardashova, Haji Fakhraddin Hajiyev

Chemical Technology, Control and Management

Deep learning has transformed the computer vision field and greatly improved the performance and efficiency of road sign recognition systems. This research compares different deep learning methods, such as Convolutional Neural Networks (CNNs), Recurrent Neural Networks (RNNs), and hybrid models, in terms of their ability to effectively detect and classify road signs under various conditions. The study compares performance measures such as accuracy, processing speed, and robustness to environmental conditions like low lighting, occlusion, and adverse weather. The results show that CNN-based methods, especially those with transfer learning and ensemble techniques, have better performance in real-time scenarios. Problems like computational …

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …

Synthesis Of A Control System For Thermal Energy Facilities Using The Quantum Photon Spin Method, Isomiddin Siddikov, N.S Yakubova

Chemical Technology, Control and Management

Increasing energy efficiency and reducing fuel consumption in the process of generating electricity and heat at thermal power plants is one of the urgent tasks. Such systems operate under conditions of random changes in external and internal influences, as well as measurement uncertainties, which reduce the quality of control. In order to overcome this problem, it was proposed to develop an intelligent control system using the quantum photon-spin method to control technological units of thermal power plants. In the proposed approach, a multi-dimensional heating boiler device was taken as a control object, and the simulation modeling of the control system …

Analyzing Lf/Vlf Lightning Waveforms To Estimate D-Region Electron Density Profiles, William R. Smith, Erin H. Lay, Kyle E. Fitch, Daniel J. Emmons

Faculty Publications

Lightning waveforms in the low frequency (LF; 30–300 kHz) and the very low frequency (VLF; 3–30 kHz) bands can be exploited to produce data-driven ionospheric D-region electron density profile (EDP) estimates with significantly higher spatial and temporal coverage than previously available. The lightning waveforms used in this paper are signals detected in the LF/VLF of negative cloud-to-ground lightning by the Earth Networks Total Lightning Detection Network. Each waveform contains a ground wave and a time-delayed ionospheric reflection. The time delay between the ground wave and ionospheric reflection has previously been used to estimate a single specular reflection altitude, where LF/VLF …

A Pilot Study On Tissue Deformation Using An Integrated Sensor–Actuator Blood Collection Setup In Aquaculture (Salmo Salar), Ishrak Siddiquee, Md Ebne Al Ashad, Ahmed Hasnain Jalal

Electrical and Computer Engineering Faculty Publications

This pilot study presents a sensor–actuator setup designed to evaluate tissue deformation in Atlantic Salmon (Salmo salar) during needle insertion. The system integrates three types of low-cost, commercially available force sensors to capture force profiles and identify biomechanical events associated with tissue layer transitions. Controlled insertions were performed on a deceased specimen, and the resulting force data were analyzed to quantify insertion dynamics and estimate tissue deformation. A simulation model based on the recorded force values was developed to calculate stress distribution and deformation, which ranged from 0.001 µm to 8.4 µm and from 0.3 N/m2 to 4.9 N/m2, respectively. …

Clinic Vs. Daily Life Gait Characteristics In Patients With Spinocerebellar Ataxia, Vrutangkumar V. Shah, Daniel Muzyka, Adam Jagodinsky, Hannah Casey, James Mcnames, Mahmoud El-Gohary, Kristen Sowalsky, Delaram Safarpour, Patricia Carlson-Kuhta, Fay B. Horak, Christopher M. Gomez

Electrical and Computer Engineering Faculty Publications and Presentations

Background:

Recent findings suggest that a single gait assessment in a clinic may not reflect everyday mobility.ObjectiveWe compared gait measures that best differentiated individuals with spinocerebellar ataxia (SCA) from age-matched healthy controls (HC) during a supervised gait test in the clinic vs. a week of unsupervised gait during daily life.

Methods: Twenty-six individuals with SCA types 1, 2, 3, and 6, and 13 (HC) wore three Opal inertial sensors (on both feet and lower back) during a 2-minute walk in the clinic and for seven days in daily life. Seventeen gait measures were analyzed to investigate the group differences using …

Optimizing Object Detection For Remote Monitoring With Owl Ducklink Radios, Colin Ren-Jin Babian

Electrical Engineering

This project develops an AI powered object detection system integrated with OWL DuckLink radios to enable real time remote monitoring. The system benchmarks multiple AI accelerators using a Raspberry Pi 5 to determine their efficiency in low power, long range communication environments. By evaluating the Raspberry Pi 5 CPU (7.62W, 14.5 camera FPS, 3.8 inference FPS), Raspberry Pi AI Camera with Sony IMX500 (6.45W, 30 camera FPS, 9.2 inference FPS), and Raspberry Pi AI Hat with Hailo-8L chipset (7.80W, 30 camera FPS, >30 inference FPS), this project identifies the most effective combination of hardware and software for edge AI applications. …

Restoration Of 6-Axis Industrial-Grade Robotic Arms, Bryce Andrew Paulson, Warren Douglas Howard

Electrical Engineering

The Staubli TX60 and TX60CR are industrial-grade, six-axis robotic arms originally designed to perform complex automation tasks in manufacturing environments. Following their retirement from active industrial use, both units were restored to full operational status. As part of this project, they were reprogrammed to execute a pick-and-place routine using kids shape-sorting toys that mirrors typical workflows found in factory settings. The six degrees of freedom afforded by each robot enable a wide range of motion, making them well-suited for tasks such as material handling, product sorting, and repetitive operations typically carried out by human workers. Each model is equipped with …

A Tailored Analog-To-Digital Converter Architecture For Optimal Performance In Troponin Cardiac Protein Detection, Karem Abdelgawad, Sameh O. Abdellatif

Electrical Engineering

In recent years, the detection of troponin cardiac proteins has emerged as a crucial component in the diagnosis and management of acute coronary syndromes. This paper presents a tailored analog-to digital converter(ADC) architecture specifically designed to enhance the performance of diagnostic systems for troponin detection. Utilizing a 180 nm CMOS process technology, the developed 8-bit Successive Approximation Register(SAR) ADC integrates key components, including a preamplifier, comparator, and a digital-to-analog converter(DAC), to optimize signal processing and ensure accurate data conversion from analog to digital formats. The ADC architecture is evaluated for its ability to achieve a substantial sampling rate of 10 …

Nanostructured Zinc Stannate Perovskite Films Synthesized Via Molten Salt Modified-Solvothermal Method For Enhanced Piezoelectric Properties, Christopher Munoz, Alyssah Fuentes, Christian Alaniz, Tarik Dickens, Mohammed Jasim Uddin

School of Integrative Biological & Chemical Sciences Faculty Publications

Three dimensional (3D) piezoelectric zinc stannate (ZnSnO3) nanoweb arrays are synthesized using a molten salt modified solvothermal method and deposited in PDMS films for electrochemical analysis of its piezoelectric response. This work is a preliminary assessment of comparative piezoelectric efficacy influenced by changes in synthesis, effecting dimension and particle size. Advantages of hydrothermal, molten salt, and solvothermal synthesis methods were leveraged to facilitate several chemical and surface engineering techniques to enhance piezoelectric properties by increasing the surface area of zinc stannate nanoparticles. The combination of these treatments reduce the size of zinc stannate to approximately ∼40nm-80nm weblike networks. Scanning …

In Situ High-Temperature Raman Spectroscopy For Online Eaf Slag Analysis, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Jeffrey D. Smith, Farhan Mumtaz, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Real-time monitoring of slag chemistry is critical for optimizing Electric Arc Furnace (EAF) steelmaking operations, where dynamic variations in slag composition directly influence slag foaming, refractory degradation, and thermal efficiency. Conventional techniques such as X-ray fluorescence (XRF), Fourier-transform infrared (FTIR), and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) are commonly used to analyze slag composition, but their offline nature and equipment constraints limit their applicability for online monitoring in harsh industrial environments. To address this challenge, we present an in situ, high-temperature analytical approach that integrates Raman spectroscopy with a custom-designed fiber-optic probe for real-time slag characterization at …

Single-Molecule Orientation And Localization Microscopy, Sophie Brasselet, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Single-molecule localization microscopy (SMLM) offers enhanced spatial resolution in optical microscopy, providing detailed insights into the spatial organization of proteins in cells at the nanoscale. Over the past decade, SMLM has progressively incorporated the capability to retrieve the orientations of single molecules using their polarized dipolar emission pattern. Here we explore recent advancements in single-molecule orientation and localization microscopy (SMOLM), which yields super-resolved images of molecular three-dimensional (3D) orientations, wobble and 3D positions. This advancement opens possibilities to explore the nanoscale organization and conformation of biological molecules as well as to monitor and design local 3D optical fields in nanophotonics. …

Switching Performance Optimization Of Sic Mosfets With Digital Active Gate Drivers, Liyang Du

Graduate Theses and Dissertations

Silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) have extensive applications in high-power density devices, but they exhibit quick switching transients that are problematic, including electromagnetic interference (EMI), voltage overshoot, and current imbalance between paralleled devices. The purpose of this dissertation is to maximize the switching performance of SiC MOSFETs using digital active gate drivers (AGDs). A three-level gate driving approach is presented to improve current sharing in paralleled SiC MOSFETs through turn-on voltage and gate signal delay adjustment. Closed-loop control with real-time feedback ensures high-reliability operation. For better practicability, a compact AGD structure of a single-path Class-B amplifier-based topology is …

Exopg Maturation And Owl Interface, Duncan Michael Louden

Electrical Engineering

The maturation of the ExOPG buoy generator consists of an interface to facilitate remote data acquisition of an existing battery charge controller. This module telemeters battery controller data including voltage, temperature, and state of battery charge. The data is transmitted to a communication system and is able to be viewed by humans on a 24/7 basis for continuous operation and human usage. The module works seamlessly as an addition to the existing ExOPG generator, and it does not interfere with any existing and planned components of the generator. The module is highly efficient and draws minimal power from the existing …