Electrical and Computer Engineering Commons^™

Modeling The Practical Performance Of Switched-Capacitor Converters And A Method For Automating State-Space Model Generation, Jordan M. Henry

Masters Theses

"A new modeling technique and a method for automating the modeling process are introduced for analyzing complex switched-capacitor (SC) converters. The model uses conventional circuit analysis methods to derive state-space models of each switching state. Steady-state performance is derived and expressed as an equivalent resistance. Whereas previous techniques have provided either the detailed performance of a simple SC converter or the limiting performance of a complex SC converter, this new model is flexible enough to provide detailed performance for any practical converter. Nonuniform component choices, asymmetric duty cycles, and other deviations from an ideal converter can be readily included. Dynamics …

Reverberation Reduction In A Room For Multiple Positions, Raghavendra Ravikumar

Masters Theses

"Reverberation in a room occurs when the direct path sound from a sound source undergoes multiple reflections from the walls of the room before reaching the listener. An impulse response of the room can be measured called the room impulse response (RIR) which captures the effects of the room. This can be represented digitally on a computer. A filter is designed to cancel the effects of the room using the information in the room impulse response. This filter is called an equalization filter and is usually placed between the source signal and loudspeaker to perform the equalization. The RIR changes …

Prediction Of Soft Error Response Of Integrated Circuits To Electrostatic Discharge Injection Via Simulation Field; Package Interaction For Electrostatic Discharge Soft Error Prediction; Full Wave Model For Simulating Noise Ken Electrostatic Discharge Generator, Argha Nandy

Masters Theses

"In the first section, a concept for analyzing soft error response in ICs to ESD via coupling through flex cable structures is presented. Its novelty lies in accounting for the transient electromagnetic fields radiated by the ESD generator that couples to the flex cable PCB thereby causing disturbance on the IC under test. This is accomplished in three stages; first by developing a full wave model of the DUT which includes modeling the PCB and flex cable geometry and validating it in frequency domain with regard to the transfer impedance. This followed by combining the ESD generator with the DUT …

Dynamic Reconfiguration And Control Of Smart Power Systems, Pinaki Mitra

Doctoral Dissertations

"To address the increasing demand and complexity, modern power systems need intelligence at almost all levels which can transform them into 'smart' power systems. The term 'smart power systems' not only refers to the terrestrial power systems with a significant penetration of distributed energy resources and energy storage such as plug-in electric vehicle parking lots (SmartParks), but also includes other isolated power systems, such as the power systems of naval electric ships. The research presented in this dissertation contributes to the dynamic reconfiguration and control of both terrestrial and ship power system with the application of computational intelligence methods.

In …

Distributed Spatiotemporal Detection For Chemical And Biological Threats Using Human Immune Mechanisms, Yatin Bodas

Masters Theses

"Ubiquitous detection of chemical and biological (CB) threats in an urban environment using widely distributed, low-cost, broad-spectrum sensors carried by public or on vehicles is extremely desirable and pertinent for homeland security. These distributed sensors should interoperate autonomously and adaptively to meet stringent operational and detection performance requirements. This research explores the use of scalable detection methodology, inspired by the human immune mechanisms to meet these challenges. An adaptive spatiotemporal control mechanism is proposed to organize the detection behavior of spatially dispersed sensors using peer-to-peer communication so that a shorter response time, higher probability of detection and lower false alarm …

Quantification Of Channel Performance And Development And Characterization Of Small Magnetic Field Probes, Surbhi Mittal

Masters Theses

"This thesis presents a new approach to quantifying channel performance using a transmitter waveform and dispersion penalty (TWDP) with frequency domain S-parameter data. Initially TWDP was defined to characterize the performance of a transmitter in optical links. More recently its use has been extended to include the quantification of channel performance, especially in high-speed copper links. This project focused mainly on channel characterization. Instead of using the time-domain oscilloscope measurements involved in the original approach, it proposes a new method that relies on frequency-domain S-parameter data obtained either from measurements or simulations. It included a parametric study of TWDP with …

Control And Design Considerations In Electric-Drive Vehicles, Shweta Neglur

Masters Theses

"Electric-drive vehicles have been identified as one of the promising technologies of the future. Electric-drive vehicles including fuel cell, hybrid electric, and plug-in hybrid electric vehicles have the potential to improve the fuel economy and reduce gas emissions when compared to conventional vehicles. One of the important challenges in the advancement of the electric-drive vehicles is to develop a control strategy which meets the power requirements of the vehicles. The control strategy is an algorithm designed to command the battery and the internal combustion engine of the vehicle for specific power demands. In this thesis, load follower and thermostat control …

Modeling And Analysis Of High-Speed Sources And Serial Links For Signal Integrity, Siming Pan

Masters Theses

"As the computer and electronics industry moves towards higher data rates, signal integrity and electromagnetic interference (EMI) problems always present challenges for designers for high-speed data communication systems. To characterize the entire link path between transmitters and receivers, accurate models for sources, passive link path (such as traces, vias, connectors, etc), and terminations should be built before simulations either in frequency or time domain. Due to the imperfection of model, data corrections are preferred before time-domain simulations to ensure stability. Moreover, data obtained from models should be compared with measurement results to judge the level of agreement for validations. This …

Time-Domain Thru-Reflect-Line (Trl) Calibration Error Assessment And Its Mitigation And Modeling Of Multilayer Printed Circuit Boards (Pcb) With Complex Area Fills, Vysakh Sivarajan

Masters Theses

"Part 1 for this thesis is on the error assessment of a time-domain (t-TRL) calibration technique. Application of the "Thru-Reflect-Line" (TRL) calibration to time-domain measurements of S-parameters (t-TRL) can be used for the characterization of the printed circuit boards (PCBs). However, t-TRL calibrated results still have deviations from the reference frequency-domain vector network analyzer (VNA) calibrated results. There are two main sources of errors in the t-TRL calibration. They are random errors, such as an additive noise and jitter, and systematic errors associated with cables, connectors, and port mismatches. This work addresses these two types of errors by proper selection …

The Design And Manufacture Of A Light Emitting Diode Package For General Lighting, Michael S. Krist

Master's Theses

Lighting technologies have evolved over the years to become higher quality, more efficient sources of light. LEDs are poised to become the market standard for general lighting because they are the most power efficient form of lighting and do not contain hazardous materials. Unfortunately, LEDs pose unique problems because advanced thermal management is required to remove the high heat fluxes generated by such relatively small devices. These problems have already been overcome with complex packaging and exotic materials, but high costs are preventing this technology from displacing current lighting technologies.

The purpose of this study is to develop a low-cost …