Server Assignment In Mirrored Server Environments,
2011
Louisiana State University and Agricultural and Mechanical College
Server Assignment In Mirrored Server Environments, Shawn Farlow
LSU Master's Theses
Massively multiplayer online games (MMOGs) may use peer-to-peer, client-server, or mirrored-server environments. Since there exist multiple server options in mirrored server environments, a problem arises when deciding to which server each player should connect. We propose three distinct algorithms that assign players within Quality of Service (QoS) as each player joins and leaves, taking into consideration whether a player already in QoS can be moved to place a newly joining player in QoS without sacrificing QoS for the moved player. Our results show that for certain numbers of servers and values of QoS, our algorithms increase the total number of …
Surface-Enhanced Raman Spectroscopy Substrates Based On Nanoporous Silicon And Pattern Transfer,
2011
Louisiana State University and Agricultural and Mechanical College
Surface-Enhanced Raman Spectroscopy Substrates Based On Nanoporous Silicon And Pattern Transfer, Pallavi Rao Malempati
LSU Master's Theses
Surface-enhanced Raman scattering enhances the weak Raman scattering by using a roughened metal-coated surface as a catalyst. Roughness in the nanometer range provides the best enhancement. The nanostructures for the surface-enhanced Raman spectroscopy (SERS) substrates, in this work, are generated using an electrochemical etching process on silicon substrates. The patterns of nanoporous silicon thus generated are transferred onto transparent polydimethylsiloxane (PDMS) substrates using the “lift-off” process. An incomplex sputtering technique is employed to coat this substrate with a ~20 nm aluminum layer. Rhodamine 6G (R6G) molecules, when adsorbed to this metal surface, form the final SERS substrate that undergoes Raman …
Parameter Tuning And Experimental Results Of Power System Stabilizer,
2011
Louisiana State University and Agricultural and Mechanical College
Parameter Tuning And Experimental Results Of Power System Stabilizer, Bixiang Tang
LSU Master's Theses
Power system stabilizers (PSS) have been studied for many years as a method to increase power system stability. This thesis focuses on the tuning and structure of the power system stabilizer. Different types of power system stabilizers are reviewed. The one studied in this thesis is the integral of accelerated power stabilizer. The generator control system is introduced to illustrate the working environment of the PSS. The mathematic model of the generator, automatic voltage regulator and PSS are analyzed and the system transfer function in presence of the PSS is derived. Base on the transfer function, a new tuning method …
Network Traffic Data Analysis,
2011
Louisiana State University and Agricultural and Mechanical College
Network Traffic Data Analysis, Harish Kapri
LSU Master's Theses
The desire to conceptualize network traffic in a prevailing communication network is a facet for many types of network research studies. In this research, real traffic traces collected over trans-Pacific backbone links (the MAWI repository, providing publicly available anonymized traces) are analyzed to study the underlying traffic patterns. All data analysis and visualization is carried out using Matlab (Matlab is a trademark of The Mathworks, Inc.). At packet level, we first measure parameters such as distribution of packet lengths, distribution of protocol types, and then fit following analytical models. Next, the concept of flow is introduced and flow based analysis …
Power Management And Optimization,
2011
Louisiana State University and Agricultural and Mechanical College
Power Management And Optimization, Hari Sundararajan
LSU Master's Theses
After many years of focusing on “faster” computers, people have started taking notice of the fact that the race for “speed” has had the unfortunate side effect of increasing the total power consumed, thereby increasing the total cost of ownership of these machines. The heat produced has required expensive cooling facilities. As a result, it is difficult to ignore the growing trend of “Green Computing,” which is defined by San Murugesan as “the study and practice of designing, manufacturing, using, and disposing of computers, servers, and associated subsystems – such as monitors, printers, storage devices, and networking and communication systems …
Lqg/Ltr Control Of Induction Motor,
2011
Louisiana State University and Agricultural and Mechanical College
Lqg/Ltr Control Of Induction Motor, Girish Arvind Yajurvedi
LSU Master's Theses
Induction motors are the most rugged electrical equipment which are widely used in the industry. Owing to the non-linearity in its behaviour, it is not a trivial problem to solve and hence we are interested in using it as a control platform. Through several decades of research a wide number of control schemes have been developed for implementing the closed loop control. Based upon the merits and demerits of various schemes we choose a control scheme called the indirect vector control of Induction motor. Using the electrical dynamics of the motor model we design a LQG/LTR controller. We employ a …
Hydrodynamic Focusing Micropump Module With Pdms/Nickel-Particle Composite Diaphragms For Microfluidic Systems,
2011
Louisiana State University and Agricultural and Mechanical College
Hydrodynamic Focusing Micropump Module With Pdms/Nickel-Particle Composite Diaphragms For Microfluidic Systems, Jeonghwan Kim
LSU Master's Theses
In this research, a rapid prototype of multi-fluidic speed-modulating (MFSM) micropump which enables modulation of hydrodynamic focusing in micro-fluidic flow has been designed, fabricated, and characterized. The size of the entire module is 33 mm x 25 mm x 8 mm and comprises of three MFSM micropumps to achieve hydrodynamic focusing. These pumps are simultaneously operated by the same actuation source. Each micropump consists of Tesla-type valves in the bottom layer and PDMS/Ni-particle composite (PNPC) diaphragm in the middle layer. The deflection of the diaphragm is obtained by the external pneumatic force, and the permanent magnet controls the displacement resulting …
In-Wheel Motors: Express Comparative Method For Pmbl Motors,
2011
Louisiana State University and Agricultural and Mechanical College
In-Wheel Motors: Express Comparative Method For Pmbl Motors, Pavani Gottipati
LSU Doctoral Dissertations
One of the challenges facing the electric vehicle industry today is the selection and design of a suitable in-wheel motor. Permanent Magnet Brushless (PMBL) motor is a good choice for the in-wheel motor because of its lossless excitation, improved efficiency, reduced weight and low maintenance. The PMBL motors can be further classified as Axial-Flux Twin-Rotor (AFTR) and Radial-Flux Twin-Rotor (RFTR) machines.
The objective of this dissertation is to develop a fast method for the selection of appropriate in-wheel motor depending on wheel size. To achieve this, torque equations are developed for a conventional single-rotor cylindrical, twin-rotor axial-flux and twin-rotor radial-flux …
Bio-Implantable Microdevices And Structures For Functional Electrical Stimulation Applications,
2011
Louisiana State University and Agricultural and Mechanical College
Bio-Implantable Microdevices And Structures For Functional Electrical Stimulation Applications, Naga Srinivas Korivi
LSU Doctoral Dissertations
This dissertation describes the development of microstructures and devices for applications in functional electrical stimulation. A nerve cuff electrode design has been developed for applications in neural electrical stimulation and recording, which addresses limitations with existing cuff electrodes. The developed clip-on micro-cuff electrode design consists of a naturally closed cuff with inner diameter in the micro-scale or above. A novel pinch-hinge feature allows a user to easily open the cuff and place it on target nerve tissue for stimulation or recording purposes. Upon release of the pinch-hinge, the cuff assumes its normally closed nature. The device conducts and reads electrical …
An Integrated Computer-Aided Robotic System For Dental Implantation,
2011
Old Dominion University
An Integrated Computer-Aided Robotic System For Dental Implantation, Xiaoyan Sun, Yongki Yoon, Jiang Li, Frederic D. Mckenzie
Electrical & Computer Engineering Faculty Publications
This paper describes an integrated system for dental implantation including both preoperative planning utilizing computer-aided technology and automatic robot operation during the intra-operative stage. A novel two-step registration procedure was applied for transforming the preoperative plan to the operation of the robot, with the help of a Coordinate Measurement Machine (CMM). Experiments with a patient-specific phantom were carried out to evaluate the registration error for both position and orientation. After adopting several improvements, registration accuracy of the system was significantly improved. Sub-millimeter accuracy with the Target Registration Errors (TREs) of 0.38±0.16 mm (N=5) was achieved. The target orientation errors after …
Eeg Artifact Removal Using A Wavelet Neural Network,
2011
Old Dominion University
Eeg Artifact Removal Using A Wavelet Neural Network, Hoang-Anh T. Nguyen, John Musson, Jiang Li, Frederick Mckenzie, Guangfan Zhang, Roger Xu, Carl Richey, Tom Schnell, Thomas E. Pinelli (Ed.)
Electrical & Computer Engineering Faculty Publications
In this paper we developed a wavelet neural network. (WNN) algorithm for Electroencephalogram (EEG) artifact removal without electrooculographic (EOG) recordings. The algorithm combines the universal approximation characteristics of neural network and the time/frequency property of wavelet. We compared the WNN algorithm with the ICA technique and a wavelet thresholding method, which was realized by using the Stein's unbiased risk estimate (SURE) with an adaptive gradient-based optimal threshold. Experimental results on a driving test data set show that WNN can remove EEG artifacts effectively without diminishing useful EEG information even for very noisy data.
Bcc Skin Cancer Diagnosis Based On Texture Analysis Techniques,
2011
Old Dominion University
Bcc Skin Cancer Diagnosis Based On Texture Analysis Techniques, Shao-Hui Chuang, Xiaoyan Sun, Wen-Yu Chang, Gwo-Shing Chen, Adam Huang, Jiang Li, Frederic D. Mckenzie
Electrical & Computer Engineering Faculty Publications
In this paper, we present a texture analysis based method for diagnosing the Basal Cell Carcinoma (BCC) skin cancer using optical images taken from the suspicious skin regions. We first extracted the Run Length Matrix and Haralick texture features from the images and used a feature selection algorithm to identify the most effective feature set for the diagnosis. We then utilized a Multi-Layer Perceptron (MLP) classifier to classify the images to BCC or normal cases. Experiments showed that detecting BCC cancer based on optical images is feasible. The best sensitivity and specificity we achieved on our data set were 94% …
Histogram Analysis Of Adc In Brain Tumor Patients,
2011
Old Dominion University
Histogram Analysis Of Adc In Brain Tumor Patients, Debrup Banerjee, Jihong Wang, Jiang Li, Norbert J. Pelc (Ed.), Ehsan Samei (Ed.), Robert M. Nishikawa (Ed.)
Electrical & Computer Engineering Faculty Publications
At various stage of progression, most brain tumors are not homogenous. In this presentation, we retrospectively studied the distribution of ADC values inside tumor volume during the course of tumor treatment and progression for a selective group of patients who underwent an anti-VEGF trial. Complete MRI studies were obtained for this selected group of patients including pre- and multiple follow-up, post-treatment imaging studies. In each MRI imaging study, multiple scan series were obtained as a standard protocol which includes T1, T2, T1-post contrast, FLAIR and DTI derived images (ADC, FA etc.) for each visit. All scan series (T1, T2, FLAIR, …
On The Visual Quality Enhancement Of Super-Resolution Images,
2011
Old Dominion University
On The Visual Quality Enhancement Of Super-Resolution Images, Amr Hussein Yousef, Jiang Li, Mohammad Karim, Andrew G. Tescher (Ed.)
Electrical & Computer Engineering Faculty Publications
Super-resolution (SR) is the process of obtaining a higher resolution image from a set of lower resolution (LR) blurred and noisy images. One may, then, envision a scenario where a set of LR images is acquired with a sensor on a moving platform. In such a case, an SR image can be reconstructed in an area of sufficient overlap between the LR images which generally have a relative shift with respect to each other by subpixel amounts. The visual quality of the SR image is affected by many factors such as the optics blur, the inherent signalto- noise ratio of …
2d Face Database Diversification Based On 3d Face Modeling,
2011
Old Dominion University
2d Face Database Diversification Based On 3d Face Modeling, Qun Wang, Jiang Li, Vijayan K. Asari, Mohammad A. Karim, Manuel Filipe Costa (Ed.)
Electrical & Computer Engineering Faculty Publications
Pose and illumination are identified as major problems in 2D face recognition (FR). It has been theoretically proven that the more diversified instances in the training phase, the more accurate and adaptable the FR system appears to be. Based on this common awareness, researchers have developed a large number of photographic face databases to meet the demand for data training purposes. In this paper, we propose a novel scheme for 2D face database diversification based on 3D face modeling and computer graphics techniques, which supplies augmented variances of pose and illumination. Based on the existing samples from identical individuals of …
Marine Buoy Detection Using Circular Hough Transform,
2011
Old Dominion University
Marine Buoy Detection Using Circular Hough Transform, Loc Tran, Justin Selfridge, Gene Hou, Jiang Li
Electrical & Computer Engineering Faculty Publications
A low cost method for buoy detection in maritime settings is presented using inexpensive digital cameras. In this method, the circular Hough transform is applied to an edge image to circular objects in the image. The center of these circles will signify the locations of each buoy. The known color information of the buoys is also used to enhance the performance by removing false detections. The algorithm is compared to an approach that locates buoys purely on color information. In order to validate the method, we test the approach synthetically and also with real images captured from a small surface …
3d Face Reconstruction From Limited Images Based On Differential Evolution,
2011
Old Dominion University
3d Face Reconstruction From Limited Images Based On Differential Evolution, Qun Wang, Jiang Li, Vijayan K. Asari, Mohammad A. Karim, Andrew G. Tescher (Ed.)
Electrical & Computer Engineering Faculty Publications
3D face modeling has been one of the greatest challenges for researchers in computer graphics for many years. Various methods have been used to model the shape and texture of faces under varying illumination and pose conditions from a single given image. In this paper, we propose a novel method for the 3D face synthesis and reconstruction by using a simple and efficient global optimizer. A 3D-2D matching algorithm which employs the integration of the 3D morphable model (3DMM) and the differential evolution (DE) algorithm is addressed. In 3DMM, the estimation process of fitting shape and texture information into 2D …
Low Temperature Epitaxial Growth Of Ge Quantum Dot On Si (100) - (2×1) By Femtosecond Laser Excitation,
2011
Old Dominion University
Low Temperature Epitaxial Growth Of Ge Quantum Dot On Si (100) - (2×1) By Femtosecond Laser Excitation, Ali Oguz Er, Wei Ren, Hani E. Elsayed-Ali
Electrical & Computer Engineering Faculty Publications
Low temperature epitaxy of Ge quantum dots on Si (100) - (2×1) by femtosecond pulsed laser deposition under femtosecond laser excitation was investigated. Reflection high-energy electron diffraction and atomic force microscopy were used to analyze the growth mode and morphology. Epitaxial growth was achieved at ∼70 °C by using femtosecond laser excitation of the substrate. A purely electronic mechanism of enhanced surface diffusion of the Ge adatoms is proposed. © 2011 American Institute of Physics. [doi:10.1063/1.3537813]
Special Issue On Information Dissemination And New Services In P2p Systems,
2011
Old Dominion University
Special Issue On Information Dissemination And New Services In P2p Systems, Min Song, Sachin Shetty, Wenbin Jiang, E. K. Park
Electrical & Computer Engineering Faculty Publications
Information dissemination is an important P2P application that has received considerable research attention in recent years. P2P information dissemination systems range from simple file sharing applications to more complex systems that allows users to securely and efficiently publish, organize, index, search, update and retrieve data in a distributed storage medium. For complex P2P information dissemination systems, there is a need for features which include security, anonymity, fairness, scalability, resource management, and organization capabilities. For effective information dissemination, following features of P2P systems and infrastructure need to be updated: distributed object location and routing mechanisms, novel approaches to content replication, caching …
Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes,
2011
Old Dominion University
Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller
Electrical & Computer Engineering Faculty Publications
Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO2 nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …
